Thanks so much for this great video. I had my reservations about routing the cable throught the trim but now I have seen how you did it, my faith in my own ability has been restored! Thanks so much for your help!

Thank you, you made it simple and easy to duplicate. It took me about 30 minutes to complete, front and rear camera. The wires just tucked right in from the front to the back in my Subaru Forester

the window pillar plastic trim (white in the video) just pulls off, grab it at the top and pull it towards you, it will pop off and the cable can be routed behind it, modern pillar trims have channels for wires built in for cameras, cabin lights, speakers, microphones etc, to refit just line up the holes with the locating lugs and slowly push it back into place, try not to push the wires into gaps with tools as squeezing wires in with tools can damage the wires, if you need to push any wires into gaps use some folded up card as that will not damage any wires, I've fitted four front & rear view cameras now and the first one I fitted I damaged the internal wires by pushing it in with a stiff plastic tool and the rear camera would not record anything, I could view the image but not record it so I had to buy a new cable and then it recorded, but to look t the cable you couldn't see any damage, so think before you use any pressure on these cables, the internal wires are very thin, just a few strands and easily broken, hope this helps anyone about to fit this type of camera, it is a good video just needs a few weeks,

Thanks so much for sharing this installation. At first we thought it might be too difficult to do it this way but after watching your video my husband had it done in about 20 to 30 minutes. Thanks so much. We also have a Kia Seltos. So far we love it.

Easiest video to follow, was able to install quickly. Very clear directions!

Thousand people did the same think hard way but you show us very easily .Thank you

This dash cam install is very much like how I did mine. I installed a front and rear Garmin 57. Worked out very well.

This video made me feel much more comfortable with putting the wire throughout the car. Thank you!

Many thanks for this - much easier with your guidance than I anticipated!

Great video. I just installed mine and followed the same principles of hiding the cables. Looks great!

Thanks 🙏 such a helpful video. I have never known how easily it is until get into it.

Brilliant video. This is the Best video I’ve seen on this topic. Thank you so much, you have given me the confidence to have a go. Really grateful.

Thank you for the Installation share and how to easy hide the cables this help me a lot! 💖

Loved the front installation but wish you had done the rear wiring as well

best instructional video ever. Thank you Sir.

Thank you so much for this! Took me like 5-10 minutes, and it was so easy! Some advice I have - do it on a warm day, or in a warm place. The plastic was nice and flexible because it's 25C today

Very useful tutorial. I've just hidden my camera cable in Mazda 2 and it looks awesome!

Best presentation hands down 💯 thank you for this guide ✌

Amazing! Easy explanation! Just got mine and needed help installing! Thanks mate !

This video was very helpful thank you.

Very well explained. Thank you so much!

First time I seen your channel Some really good video and good advice brilliant 👍🇬🇧

thank you for your sharing, very good instruction for beginners

thanks for this. i have been looking for suitable sticky tapes to stick the wire inside the car. never known this and looks pretty clean

Thank you for sharing this content. Huge help!

Great work.very helpful

Simple installation, could be better with an actual hard power wire to the fuse panel to run only when engine is turned on. As for a rear camera, just run the rear camera wire as he did for the cig lighter wire and then run the rear camera wire to the rear under the rubber seal. Be careful of the placement of the wire on that a-pillar. If there is a air bag under the molding with the wire may restrict the deployment of cut into the bag upon deployment and it will not deploy correctly. Since this is the UK there may not be an airbag in that pillar. If there is an airbag in the pillar just remove that a-pillar trim molding and run the wire UNDER the airbag,.

Thanks a lot for the video, it works wonderfully.

Just what I was looking for. Tidy.

Nicely done sir.

Thanks for your video I was able to install both front and rear cam......I really appreciate it. Nice video. Am from Jamaica 🇯🇲 u save me alot.

Thanks! I’ve been driving with dangling cable for 2 years, for no good reason apparently

Take the extra time. A dash camera takes me minimum 1 to 2.5 hours on average (if there's a rear camera). Take apart more panels and don't run wires in front of side curtain airbags.

Best guide! thank you

Nice tutorial sir...btw,mind sharing what kind of phone holder you are using now?

Thanks for uploading this 👍

Good job Sir - Save me some money by doing my self. Thanks a bunch .

absolutley amazing

Most modern cars have airbags under the a-pillar trim, I don't think it is a great idea to tuck your wiring up under the rubber like that. You can pop the trim off and run the wire above the airbag but you need to know what you are doing. There is a clip that retains the trim if the airbag deploys, if you don't know how to remove them you shouldn't be attempting it. I think it is bad advice to suggest anyone puts anything between the airbag and the occupant who will be sitting in that seat.

Thanks for taking the time to do this video. I was hoping you would show installation of the rear camera because it comes with a long cable and I have a small car so I've ended up with several feet of extra cable. How do you handle that to hide it? I've run the cable through the passenger side and now those loops of extra cable are tucked up on top of the sun visor when it's in the up position but of course, that's out of sight this minute but won't work when I need the visor down (a LOT of the time). Do you have a solution?? thanks

Trev, I am wondering how you fitted the long cable to the rear camera? All new cars have side curtain air bags fitted, what are the problems/dangers of pushing the cable along the door opening trim above the doors where the side curtain air bags are fitted?

thanks i did it ! i was not installed more than one year lol it was in front of the middle mirror

Cigarette Lighter and big Power Transformer is a pain in the arse. About time they made these 'things' 12V DC Connectable so you can connect to the Fuse Box. Everything is hanging on a Prayer.

Great video. I did mostly the same thing just now after watching your install except in a Kia Soul.

Well... that WAS easy! I didn't even need a tool, just jammed it in with my fingers. Didn't think it would be that easy, thanks!

really great help thanks muchly!

Well done - thanks.

Correct me if I am wrong. You have installed the wire on the A Pillar over the curtain airbag. This will interfere with the deployment of the curtain airbag and is a safety issue.

Thank you so much!!

Class. Easy. Thanks

Just what i was looking for except your steering wheels on the wrong side 😮

I have the same camera but different "brand". I would say that being taller, I mounted higher and not centered; its a wide angle lense, so dont be too specific about being center.

Thanks... no accidents for me..

wiring that router over around the A-pillar is a big no-no as the pillar airbag once deployed, the wire wound be flying off like a bullet..... only run the wire along the windshield and A-pillar seam......

Solid vid cheers

excellent video mate , same is U3000 Dash cam?

Nice watch ,what make is it

Good job sir

Bro, you are amazing 🤩🌹

Will doing this effect the seals on the car at all?

Do you have a video showing how to install a rear camera?

One important warning: As others said, the cable blocks the airbag if you install it this way. Just remove the side plastic of the car and put the cable around it. Here is how to do it: kzfaq.info/get/bejne/kM1pl8xmuZncpI0.htmlsi=zaM5NxOuG55fgkKu Other than that, many thanks for informative video! I installed mine nicely.

I have installed 2 different dash cams. However my new truck has the 12v supply on the top of the dash. How do hide or secure the wires on the top of the dash so it doesn’t look just placed there

What is that little tool called, if I want to order one on Amazon ?

1:32 mins (

Thank YOU !

thanks trevor

Its like a Sirius XM antenna install. I have never done this or been able to hide the wires. Its just out there. Get a cheap Dash cam and don't break the bank, a risk but you have to live

what model of camera you used?

would have liked to see wiring the back camera

Thanks boss !!!

I hard wired my dash cam using an add a fuse but no power. The fuses are good, cable is brand new and wired up right. One to the fuse, one to ground. What am I doing wrong?

Pop the A-Panel off and put the wire behind the airbag dude. If the airbag deploys someone's going to get messed up really bad...

I don’t like this type of dashcam that plugs into the 12v. It means that it's only on when the car is turned on since power is cut off to the accessories when the car is turned off. If you have a dashcam that has a monitoring mode when parked, you have to hardwire it to the fuse box.

Great I was afraid to go on that corner on the roof to the door

And for 360 car surveillance, when parked?

how long was your cable ?

Thanks 👍

can we see installation of the rear cam please

Where can got Camara security from Camara back Camara with the 24.7 cable to fuse

Incredibly usefull. So much for that.

Almost thought I finally found the right video of how to hide cable. I can't figure out installing the rear camera; how to hide cables along side interior and at the rear window or outside by the plate. 😢 Guess I'll keep searching. I shouldn't have to pay an expert over $100 to install.

What’s the little tool you use to help stick in the wire thanks

Great video Thanks for posting it. BUT you really need to return that car. The factory put the steering wheel on the wrong side !

what's the tool you are using?

3:00 That is actually not a good idea. In most cars there is the airbag exactly under this spot. By routing the cable over the Airbag you prevent it from expanding normally when the airbag sould deploy.

Great I will now install like this in my Kia Optima

Is there no wireless options that you can just charge???

How do you power the back camera though

Ok, safety is paramount! Disconnect the battery completely for about 20 minutes before working around the A-pillar. Last thing anyone wants is an accidental AirBag deployment! SAFETY FIRST

What kind of camera is this?

I wouldn't meddle with the plastic and linings ..... it's 21st centry I'm surprised no dash makers come up with rechargeable ones that can also be pair Bluetooth to the rear.... I guess dash tech currently is still TOM TOm GPS era of the early 2000s

Thank you, saved from the hassle of opening the a pillar.

Nice work. This can be avoided by having a USB port in the rear view mirror like some cars have. What do you think of the Seltos?

What brand of camera is that Sir? Thanks

Use fingers, use blunt plastic, place and measure first. Got it.

You're almost definitely blocking the side curtain airbag.

Show us the back installation jeso😮😮😮

most airbag is fitted behind the A bar, It may kill you, should remove the cover, put cable behind the airbag !

He discovered the camera slides out and in by accident