Egr valve in a 2005 chrysler 300c

Рет қаралды 17,209

santillos family

5 жыл бұрын

Changing egr valve in the 05 Chrysler 300c. Like and subscribe!

Пікірлер: 23

@arneliuscoleman1588 4 жыл бұрын

Give this man a 🎖str8 into it no half steppin 🔥

@KNGER1988 3 жыл бұрын

Well done video thank you sir! My car is currently just turning off while I'm driving and was searching around for a while which lead me to this

@michaelmcallister711 3 жыл бұрын

You da man!! I'm gonna work on the car tomorrow!!

@thekidskushed 4 жыл бұрын

That minion edit 😂

@StockCarGuy Жыл бұрын

i just changed mine, and p0403 code came up, should i put the old one back on or keep driving a few 100 miles and it should reset on its own?

@antionethomas2956 4 жыл бұрын

Question do you think it's possible that the EGR tube could cause the check engine light to come on after changing EGR valve ? Do I need to change the tube ?

@santillosfamily7302 4 жыл бұрын

I wouldn't think so as long as you have a good seal and no clogs in the pipe.

@lololucero1 4 жыл бұрын

Question was the car turning off on you and check engine light coming on? That’s the issue I am having and the code P0406 comes up.

@ModifiedMike Жыл бұрын

Mine too. Any fix?

@ModifiedMike Жыл бұрын

Not fix, asking if you’ve figured yours out 😂

@charlesguero2003 2 жыл бұрын

Ok, so "the red lighting bolt " is coming on on my 2005 300 c (hemi).... everyone says it's a bad throttle body. So I replaced it. Still having the same problem. Next they say is the computer. But I seen on the v6 it was a blue gasket on the EGR.. I'm watching this and I see a white gasket. I'm going to try the gasket replaced first before the computer. That gasket can't be more then 10 bucks. ANYWAYS, my question to anyone one, have you seen this before? (The white rubber gaskets on the hemi 2005 making the red lightning bolt cone on?) I mean if it does on the v6 could it on the hemi? Thanks

@santillosfamily7302 2 жыл бұрын

Have to tried crank positioning censor

@zackkingston2800 3 жыл бұрын

Mine went into limp mode instantly after installing. Cannot get it out

@joelmurillo2529 7 ай бұрын

Did you get it out and if so how?

@14paste14 4 жыл бұрын

Add a catch can

@THEODINOFFICIAL Жыл бұрын

So is a 10mm wrench the best way? Cuz I can’t a fking socket on it for the life of me

@kushsmoker5072 4 жыл бұрын

Why did you replace how was the car running

@santillosfamily7302 4 жыл бұрын

Check engine light came on and code was P0403 and was idling ruff so that was first fix and fixed the issue. Thanks for the comment hope the vid helped!

@kushsmoker5072 4 жыл бұрын

Video really helped me no doubt couldn’t of done it with out this video but my car keeps shutting off when I’m idleing at a light after it shuts off it could crank right up when I press the gas down it will all of sudden like act like I’m pressing the brakes don’t really know what’s wrong with it

@santillosfamily7302 4 жыл бұрын

Is it idling ruff like has a major cam? I changed crank positioning sensor one time it was going down road and died then ran ruff so I changed it and it fixed it.

@marvpmg1483 3 жыл бұрын

Kush Smoker What’s up bro , did you fix that issue w the Chrysler stalling ?? I have same problem