FORD FOCUS FUEL PRESSURE SENSOR LOCATION, DIRECT INJECTOR FUEL PRESSURE SENSOR

No video

FORD FOCUS FUEL PRESSURE SENSOR LOCATION, DIRECT INJECTOR FUEL PRESSURE SENSOR

Рет қаралды 73,903

Күн бұрын

FORD FOCUS FUEL PRESSURE SENSOR LOCATION, DIRECT INJECTOR FUEL PRESSURE SENSOR
If you have Ford Focus and you need to replace the fuel pressure sensor or you want to know where the fuel pressure sensor is located on Ford Focus MK3 Third Generation we will explain that in this video. If you have direct fuel injector you will have 2 fuel pressure sensors, one fuel pressure sensor will be for the low pressure line and one fuel pressure sensor will be installed on the fuel rail. In this video we will demonstrate where the fuel pressure sensor on a 2013 Ford Focus is location but the procedure should apply to the whole first generation Ford Focus.
This video might be helpful on:
2012 Ford Focus Fuel Pressure Sensor Replacement Location
2013 Ford Focus Fuel Pressure Sensor Replacement Location
2014 Ford Focus Fuel Pressure Sensor Replacement Location
2015 Ford Focus Fuel Pressure Sensor Replacement Location
2016 Ford Focus Fuel Pressure Sensor Replacement Location
2017 Ford Focus Fuel Pressure Sensor Replacement Location
2018 Ford Focus Fuel Pressure Sensor Replacement Location
2019 Ford Focus Fuel Pressure Sensor Replacement Location
► High Pressure Fuel Sensor: amzn.to/31DLy7P
► Mechanic Tool Set: amzn.to/2UUwqzR
► Scanner That We Use: amzn.to/30f3HbC
► Check out our Amazon Store for the tools and parts that we use: www.amazon.com...
This is not a sponsored video. Everything is purchased by us!
The video is meant for entertainment purposes only. Do not Attempt!
AMAZON ASSOCIATES DISCLOSURE
Electrical Car Repair LIVE is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com
*Disclaimer
We, Electrical Car Repair LIVE, are not responsible for property damage or injury incurred as a result of any of the information contained in this video. Information given in this video does not guarantee the desired outcome. Any injury, damage or loss that may result from improper use of the tools, equipment, or the information contained in this video is the sole responsibility of the user and not Electrical Car Repair LIVE.

Пікірлер: 36

@ElectricalCarRepairLIVE 3 жыл бұрын

⛐ Check out our Garage to see what tools we use and recommend: www.amazon.com/shop/worldmechanics ⛐ Subscribe and hit the notification bell by the subscribe button for new videos: kzfaq.info/love/k_lcDzEWLs5fVRYceK3-9Q ⛐ Link to donate: gf.me/u/y59hvn

@patrickwatt3628 Жыл бұрын

Thank you so much. My 2015 Ford focus is do just what you said. Looking forward to more of your videos.

@ctscantechnologist 3 жыл бұрын

But how do you diagnose the sensors?

@Dhi-fe5eu Жыл бұрын

Great video. Could you make a video on how to relieve the pressure when working on the fuel pump or other fuel related items.

@CP-nh6ml 3 жыл бұрын

Do you have a video on how to replace the hand brake assembly on the 2012 Ford Focus?

@tscclayton Жыл бұрын

Are these sensors the same part number?

@MrtalentedReid 3 жыл бұрын

Thanks for sharing

@MrRandyj72 10 ай бұрын

are the two sensors the same part number ?

@carlosoloimon201 Ай бұрын

No top is very diferent to close to rail.

@MegaJumpinbean Жыл бұрын

Where is the the evap high pressure sensor located ?

@carlosgomez7831 2 жыл бұрын

I bought a focus 2012 titanium manual 2.0... mark the code p0087 high fuel pressure rail system too low... change the spark plugs change the fuel pump... new... but change the rail fuel regulator I bought it used in junker the fault persists when I go slowly, fine, but if I step on it hard to run, it doesn't respond...

@senadalic1419 2 жыл бұрын

I had the same problem. Replace you low pressure sensor, located behind the fuel pump on the engine. Its connected to the fuel rail

@chriscurran8194 2 ай бұрын

Can you do a video of boost sensor code p2566 fault

@chriscurran8194 2 ай бұрын

2012 ford focus

@travissnyder8277 3 жыл бұрын

2014 Ford Escape 1.6l SE 2wd So, I just did an intake gasket replacement and while doing so I went ahead and did the timing belt, waterpump, timing tensioner, ilder pulley, spark plugs, ilder tensioner, serpentine belt and both CV axles. When oil leaks from gasket it got deep into plug well and the boots to the coils were oily. Everything is put back together and went I go to crank it up it cranks, turns over, but doesn't fire up all the way. I have a video posted. (I am thinking no fuel pressure or maybe need to purge air out of coolant system.) Video won't post... so kinda stuck lol.

@modoguerra2015 Жыл бұрын

hello how is it I have a 2012 ford focus and I have changed the sensors and the pressure pump and it keeps turning off

@esmeraldaturrubiates343 3 жыл бұрын

I have a 2014 Ford focus everytime I fill up gas tank it has trouble turning on.Can you tell me what it can be? It only happens when I fill it up..

@Supersweatyturtle 3 жыл бұрын

That's something wrong with your purge valve canister. If you contact the dealership they'll replace it for you under recall. I have 2013 ford focus and it used to take a couple of minutes after putting gas in the tank for the engine to want to turn on

@josebarrios560 2 жыл бұрын

Evap lines had the same problem and replaced never happened again

@kennywillkillyou8340 3 жыл бұрын

I got code p2872 on my 16 focus se I replaced the crankshaft and clutch b light still on what do you think?

@senadalic1419 2 жыл бұрын

Which sensor is the low and which sensor is the high? Is the one underneath the manifold the high?

@motshewankhumishe1592 Жыл бұрын

The silver one that screw to the engine block is for HIGH pressure pump.

@yeaforwhat1026 2 жыл бұрын

is this the actual fuel pump or is there one in the gas tank

@senadalic1419 2 жыл бұрын

There's two. One in the the tank and the one on top of the engine is the high pressure fuel pump, usually goes out bcuz the spring gets stuck. Supposed to expand out at least 2 inch

@toddpikop3463 3 жыл бұрын

I have a 2012 Ford focus that won't start I changed the whole front clip on it because if a accident note the air bags never went off and I assembled it back and now it won't start can you help me?

@Kindlerjason 3 жыл бұрын

Did you figure this out?

@sergioclaveria7056 2 жыл бұрын

Focus on your focus!!!😂😂😂😂😂😂🙊

@Bad_Actor 2 жыл бұрын

Guys, guys, guys....

@Bad_Actor 2 жыл бұрын

Glad this isn't a drinking game.

@fredericmozart959 3 жыл бұрын

Anyone else get a p1450 code? Just got it on my 1.0 focus

@Masterofnon3 3 жыл бұрын

@frederic mozart did you resolve the p1450?

@fredericmozart959 3 жыл бұрын

@@Masterofnon3 yea I did. I replaced the purge valve and it’s all resolved now. Pretty easy to do even for a beginner like me. It’s a Ford specific part if you want to replace it tho

@carlosgomez7831 2 жыл бұрын

change everything except the sensor that you are changing

@PerroSucio Жыл бұрын

@@carlosgomez7831 did you get your problem solved ?