How To Order SMT Service From JLCPCB

How To Order SMT Service From JLCPCB | PCB + Components

Рет қаралды 108,222

Күн бұрын

$5 discount for the first 40 to order on www.JLCPCB.com with code “JLCPCBnoob"
JLCPCB's SMT assembly - Every customer on JLCPCB will get $7 and $8 for free engineering fee for SMT orders
I was waiting for this service for some time. Now I can solder all my PCBs for very cheap and then use the boards in my projects, or sell them on my store.
ELECTRONOOBS.io: electronoobs.io
Help my projects on Patreon : / electronoobs
my Q&A page: electronoobs.io/forum/index.php
Facebook page: / electronoobs
Canal en Español: / electronoobs en español
LINKS
-------------------------------------
Tutorial: electronoobs.io/tutorial/58
Tutorial webpage: electronoobs.com/eng_circuito...
PRINTERS FDM
-------------------------------------
All printers: bit.ly/2lPkaS7
Tron X1 (only 89.5€): bit.ly/2kiqpx9
Coupon: "U363AD0D5558D000"
Creality Ender 3: bit.ly/2kLbJa7
Coupon (169.9$): "1J6X3Z40U1"
Alfawise U30 (145€): bit.ly/2kLtMNr
Alfawise U20 (236€): bit.ly/2kBYZmi
Alfawise U50 (181€): bit.ly/2kNSk8m
Crealitu CR10 (345€): www.banggood.com/custlink/mvK...
Creality CR20 (363€): www.banggood.com/custlink/KvD...
TEVO Tarantula Pro (199€): bit.ly/2mcbeGn
Anycubic MEGA- S (354€): bit.ly/2lSiQh8
PRINTERS RESIN
-------------------------------------
Anycubic Photon SLA (400€): www.banggood.com/custlink/mKD...
Alfawise W10 SLA (245€): bit.ly/2lOiQPf
Longer Orange 10 (208€): bit.ly/2mkgCaN
Like share and subscribe to motivate me. Thank you
#SMT
#JLCPCB
#tutorial

Пікірлер: 153

@ELECTRONOOBS 4 жыл бұрын

Sign up at ELECTRONOOBS.io: electronoobs.io/ Follow me on FACEBOOK for more: facebook.com/Electronoobs help me on Patreon: www.patreon.com/ELECTRONOOBS

@vineetadevi1108 2 жыл бұрын

I have a schematic of my amplifier project can you please make gerber file.

@ismaelherrera9089 2 жыл бұрын

Could I download the 3D view? Pudiera yo descargar el 3D?

@SianaGearz 4 жыл бұрын

The way double sided SMD soldering works, one of the sides is the "main" side with most of the components on it, and the other the "back" side with much fewer. The "back" side is manufactured first. But after the stencil solder paste is applied and before the component is placed, there is another robot that puts a little dot of epoxy glue (usually yellow or red) under the middle of each component. When the PCB is soldered, the heat kicks off the epoxy besides soldering the components in place. But it still needs to cure, and then the boards can be flipped over, and the main side can be manufactured as normal, without all the back side SMD components succumbing to gravity! But it's still a finicky, lengthy and comparatively expensive process, so it's generally avoided for most products, and also doesn't combine well with batching.

@joetke 4 жыл бұрын

Great tutorial! Instructive step-by-step and helping. Thank you!

@ConsultingjoeOnline 4 жыл бұрын

Awesome! I would love to try this service. I love those guys. Thanks to you I have designed and built a few PCBs. Would love to see some of these boards in the store.

@peterensinger1770 Жыл бұрын

Very good video i have used JLC PCB a few times for various pcbs for projects and am very impressed with the quality and speed of their service. On the next project i will be looking at using the SMT assembly service as this board has a large number of surface mounted components some of which i will have to fit by hand as LCSC don't stock those parts but using the assembly service will significantly reduce the time the project takes to complete. This guide has helped me with the process. i am very surprised at just how low the prices are for these boards.

@capistor1 4 жыл бұрын

I like this format of video... casual is always good.

@andymonks7126 4 жыл бұрын

I’d like to order at least 6. They look great

@MCsCreations 4 жыл бұрын

Pretty interesting, dude! Awesome board! 😃

@Drxxx 4 жыл бұрын

amazing project! i like it

@thenextproblem8001 4 жыл бұрын

Ah just in time man. I love you. Tomorrow i will order with smt. Ps, beard looks so good. Keep it up🤭

@yhpeng6555 3 жыл бұрын

One-Stop Fabrication and Assembly service at www.pcbcart.com/assembly/overview.html

@MohammedNoureldin 3 жыл бұрын

You are awesome mate! Best regards from Austria.

@Condurafly 3 жыл бұрын

What happens to the components which are available from LCSC but not ready for Assembly? (video reference 11:35) Did they just come along with the pcb and you can solder them by yourself or do you have to source them differently?

@Bianchi77 9 ай бұрын

Nice info, well done, thanks for sharing it with us :)

@eng.qutaiba1995 3 жыл бұрын

Thanks for your help and advice

@markmaker2488 4 жыл бұрын

Great video, thanks!!

@calabrese1531 4 жыл бұрын

These are troubled times for the KZfaq creators indeed. The demonetizing policies, the algorithm, the sponsors are now more demanding and the plethora of other channels doing the same thing are really affecting the quality of the contents. I understand there are bills to pay but long gone are the days when KZfaq was THE creator's platform, nowadays KZfaq punishes creators and viewers alike.

@ashwin372 2 жыл бұрын

the quality of content is going down just for promotion

@kinuxinfo4112 4 жыл бұрын

Thanks for the video 😍

@fluiditynz Жыл бұрын

Nice design! I'm considering placing a manufactured order with jlcpcb too. It's a bit tedious trying to place lots of 0603 LEDs by eye and JLCPCB are so well priced. So many great projects, so little time!

4 жыл бұрын

Thank you for the effort ;)

@DxBang3D Жыл бұрын

If I have pins or other type of connectors which are soldered on the back but mounted on the top... does that count as top or bottom?

@100roberthenry Жыл бұрын

hi, how can i replace multiple parts of the same , but from the assembly smt library???? i dont want to have to redo my whole schematic...

@tvishmaychoudhary69 4 жыл бұрын

New look ? COOL!!

@mikeberger1688 3 жыл бұрын

My csv pick and place file shows some resistors at 90 degrees (which is what I want) and their placement preview shows them vertical at zero ?? !

@irgski 3 жыл бұрын

What abt thru-hole parts? Can jlcpcb load tht parts or is that something we have to do? In order to use your displays for something like a digital clock, you need the “:”…Do you have an option board with the colon?

@henryrobinson9837 4 жыл бұрын

can you lay out a board for a low pass filter with an op-amp, i am new at this , i am an auto tech working with an oscilloscope and need an external filter

@zaidfitri 3 жыл бұрын

Hi, My design is smaller than the mininum 2cm x 2cm for SMT service. Should just make the board bigger and cut it myself?

@a6dulsalam511 4 жыл бұрын

I like it It's realy cool service I should try it

@timek1986 4 жыл бұрын

@Electronoobs, what about smt assembly limit of 50pcs. Could you explain it?

@kalutecpowersolutions9523 Жыл бұрын

sir, I would like to place order for pbcs what do i do?

@brakodeacachimba1185 2 жыл бұрын

Hi, do you have a led pcb board with a usb charge design? I want to do a Acrylic LED lamp and I want to use a pcb board in the base with all integrated

@FilipOliveiraa 4 жыл бұрын

Nice video, and good quality product! Keep up the good work!! Could you please use them as a vídeo tutorial for an NTP clock, or instead, using a RTC? I would be interested on buying 4 of them for this pourpose. Regards from Portugal!!

@sdlm7920 2 жыл бұрын

Many thanks!

@satchelsieniewicz5824 2 жыл бұрын

you are amazing!

@mariopurba1010 3 жыл бұрын

How to order the Central PCB will make delivery to Medan City - Indonesia ... Can the buying process be possible?

@MrCaliforniaD 4 жыл бұрын

Hi, you did not address the minimum quantity. Is that minimum important when doing a pcb? If it is, does this minimum have to be reached in the total parts of the order? What if you don't reach it? They give you the rest un-mounted?

@amtpdb1 3 жыл бұрын

Hi, I have just started using Eagle PCB. Could you tell us what items you put on each gerber layer and why? By this I mean, They have a top copper layer and what should be put on this layer? Pads, holes,..... and why they are added to each layer. I have tried to send files to JLCPCB and have had some issues with the gerbers. As they are a sponsor of yours, I would think this would help them and your subscribers. Thanks

@kaspervanlierop 4 жыл бұрын

why is it that the resistors dont blow op ? the led hase a voltage drop of 3 volts , so 2 volts over the resistor. i=2/20 en than i *u is 0.2 watt. but your using a 1/8w resistor i myself what to do this project. but the leds i want to use only have a smaller voltage drop,

@dongpedroyi 3 жыл бұрын

How did you get SMD components soldered to a dual-layer PCB? The JLCPCB online chat guy told me that they only solder SMT components if the PCB is designed single-sided from the start...I'm confused.

@Cuningan 3 жыл бұрын

Hoy he intentado mandar al servicio de ensamblado pero me salen casi todos los componentes girados en la previsualización. Ya no me fío si los van a montar bien o mal...

@nerdquontics684 4 жыл бұрын

What is the resistor code for r4 on the electronibuino

@BenjaminFarahmand 2 жыл бұрын

Do you have any thoughts on using KiCAD vs EasyEDA?

@MikaelArhelger 3 жыл бұрын

Great tutorial. Very useful because I plan to make a 5VDC controller for 3-blade motor (Open Source). Application: Mosquito Trap.

@PaulSpades 3 жыл бұрын

This is great. You should really start selling populated PCBs on your site. I'd definitely want your soldering iron. Maybe the ATtiny console, too but I'm too lazy to order the PCBs and components myself. Sell them as DIY/educational kits, there shouldn't be any problems with certification nonsense. You could even probably get other electronics online stores to order a few.

@superdau 4 жыл бұрын

How is customs handled for JLCPCB? Just wondering, because customs free shipping will be dropped next year in Austria and in all of the EU in 2021. I wouldn't mind the additional tax on items, it's only fair considering when buying locally you have to pay it. But the additional handling fee that the postal service will collect (10€ here in AT) pretty much kills China orders for me.

@ELECTRONOOBS 4 жыл бұрын

I don't know for other countries. Send a mail to the if you want. But here in Spain I never paid customs fo JLCPCB.

@diamony123 3 жыл бұрын

Would you design PCB for someone. I want a pov wand with 48 tiny 602 with 6 smd shift registers.

@theoneandonly2025 4 жыл бұрын

Do you know if more components / colors for the PCBs will be available in the future?

@ELECTRONOOBS 4 жыл бұрын

For now I don't know anything more...

@miikezdanitoff6392 3 жыл бұрын

Good job my friend for your videos ! recently I placed my 1st order in France at JLPCB and I had bad surprises with Fedex... they advance the expenses vat + customs fees in our place, supposedly to save time on shipping but it's illegal and moreover they charge 15 € of file fees... many people are in the same situation as me :-( it would be great if you could give your feedback and open or make a video about it Thank you !!

@linagee 4 жыл бұрын

Maybe on the next version, use multiple vias for the large tracks going through the board.

@rickyzefani1710 3 жыл бұрын

is possible to order PCB and part without soldering the part?

@sachinraj8928 4 жыл бұрын

superb broooooooo

@teabagNBG 2 жыл бұрын

i think i might get a few keyboard pcb + smd led done from these guys...

@cbanosabreu 4 жыл бұрын

CUAL ES PROCEDIMIENTO PARA SOLICITAR LA FABRCACION DE LAS PLACAS Y EL MONTAJE DE COMPONENTES

@ismaelherrera9089 2 жыл бұрын

Could I download the 3D view? Pudiera yo descargar el 3D?

@monishmehmi3503 4 жыл бұрын

Hey bro .. I have a doubt .. I tried the and service and in the demo online it showed the IC turned 90° .. and now I see the same in your video .. so I thought of asking it .. does that work .. the orientation of IC in demo is important to be corrected or we can order it as such ..??

@ELECTRONOOBS 4 жыл бұрын

Yes, it works. But you must be sure of the polarity of your components. The dot in the review marks the orientation.

@pulporock 4 жыл бұрын

Jclpcb are excellent had few a boards made and smt included. Does any one know a good through hole assembly service in China. This would be really good, jclpcb does the smt and an other company can do the through hole. Good video. Cheers Pulpo

@artbyrobot1 5 ай бұрын

just bought x5 flex pcb off them. first time ever ordering. was $220. ouch. very dense and tons of components though so yea... they charge a lot of extra fees for flex style pcb too. but i had to have that style for my use case.

@abeditani8293 4 жыл бұрын

Do you have store in AliExpress ? I already buy a million stuff from there

@startobytes 4 жыл бұрын

What is your online Store called?

@sourjyanaskar6092 3 жыл бұрын

If I use 10 of the SAME extended part, will I be charged $ 10*3=$30 or $3?

@matteol.7311 3 жыл бұрын

Hi everybody. I tried to include the SMT service with the black color, but it gives me a "parameter exception" error just when I have to add to cart. It's written SMT service should be available with black too. I don't get why I can only go for the green one :(

@antoniorn1 4 жыл бұрын

Great product. Are this product available on your online shop?, I have search for it there and I haven't find it. I have only find a downloadable version for the cost you tell in video but remarks that it is not the PCB assembled.

@ELECTRONOOBS 4 жыл бұрын

Assembled is not available! Sorry!

@Not-Only-Reaper-Tutorials 3 жыл бұрын

what if I designwith kicad?

@abeditani8293 4 жыл бұрын

We're the link if I want to buy a 8 unit

@AlexGutierrezPhotography 4 жыл бұрын

So where is the store?

@ireshjayawaradana5158 4 жыл бұрын

thanks man

@burtonBG 4 жыл бұрын

Great video! Do you know if they can program a microcontroller with my firmware with the smt service?

@gabrielvigiano 4 жыл бұрын

owwww... u really r my hero... i dont know how to thank u for pass all this knowledgement... God bless u!!!

@Ed19601 4 жыл бұрын

You jumped a bit fast. One moment you are in easyEda pcb program and next moment you are selecting from an lscs library. How,where?

@sohampatil901 4 жыл бұрын

Hey bro can lora module use to make transmitter and receiver for drone

@joaomarques7180 4 жыл бұрын

lora has too much latency and sometimes it wont even receive the commands if they're too fast

@kakeergodt4609 4 жыл бұрын

My drone has lora

@sohampatil901 4 жыл бұрын

@@kakeergodt4609 can you show me how did you make it please contact me

@spicemasterii6775 4 жыл бұрын

Is this made in China? If so, will your designs and IPs remain safe?

@FixDaily 4 жыл бұрын

What was the total cost of those boards?

@mechagorori 4 жыл бұрын

nice!

@avtomat4 3 жыл бұрын

Only green mask available is a pity... EDIT: Now the black mask is also available for the 2 layer boards. Nice!

@seazilialiabond5740 4 жыл бұрын

bro can you give me circuit deign schematic of 12v battery 3amps,charging circuit with auto cut function using 555 timer,plz bro.no satisfied vdeo in youtube.plz bro

@Sekhar_Home 4 жыл бұрын

Pls make corrosion free water level sensor amd pump controller

@joaomarques7180 4 жыл бұрын

That beard sure grew a lot in these last 2 days hahaha

@ELECTRONOOBS 4 жыл бұрын

Magic

@birsingh5388 Жыл бұрын

Where are you from?

@mpty2022 2 жыл бұрын

you back wall is interesting, however if you change it something less complicated/ blurred, your video file size will be smaller :D

@marijnstollenga1601 3 жыл бұрын

I want a wall like that

@Jadinandrews 4 жыл бұрын

Just a question, if you accidentally used a generic resistor and changed the value, would JLCPCB at least warn you of that, or will you receive the pcb minus a resistor.. So in other words, we have to be VERY careful to make sure all the components are in their SMT library?

@linagee 4 жыл бұрын

Think of it like making a recipe. If you tell someone to add a pound of salt instead of a pound of flour, they're going to blindly follow your direction and they'll hope it comes out ok. (It won't.)

@Jadinandrews 4 жыл бұрын

@@linagee thanks but that's not really my question, though it was similar. I have no question that jlcpcb will add components to your design even if you made a mistake. My question was whether jlcpcb will at least warn you that components on your Gerber do not exist in their SMT library. I've seen videos since asking this question where components were left off the board (without warning) because the wrong outlines were used so that answers my question. So you need to be very sure if your design before submitting it, it would be quite annoying to order 50 boards with as many SMT components only to find a single 0402 resistor was omitted for technical reasons that weren't obvious to the designer. I'm about to submit my first SMT assembly order just finalizing the design. So I'll order a small quantity first to make sure it works and all components were added.

@Jadinandrews 4 жыл бұрын

@@linagee so in baking terms my question is, if you asked someone to bake a cake that can't weigh more than 500g, and then the recipe calls for 1kg flower, would they just omit the flour or warn you first.

@gudimetlakowshik3617 4 жыл бұрын

He has note saying "Time travel stuff" 😂😂

@gudimetlakowshik3617 3 жыл бұрын

@Utkarsh Amitabh Srivastava at the left top corner

@gudimetlakowshik3617 3 жыл бұрын

@Utkarsh Amitabh Srivastava xD

@AJB2K3 4 жыл бұрын

Thank you for taking the time to records and review the service. One point of note on the video. Can you slow down abit? I feel like you are rushing through the video.

@calabrese1531 4 жыл бұрын

Adam Bryant I don't blame him to try to finish his obligation with his sponsor as soon as possible.

@AJB2K3 4 жыл бұрын

@@calabrese1531 I didn't see this as a sponsor episode.

@adithyam4503 4 жыл бұрын

Yes exactly

@calabrese1531 4 жыл бұрын

@Adam Bryant no, of course it is not. You're right. Silly me.

@TheJay6621 4 жыл бұрын

I am interested to buy.. these modules.. please make it affordable.. love..

@SIKHGT650 4 жыл бұрын

I just order my first pcb from jlcpcb .....great service but no promo code received 😭

@SIKHGT650 3 жыл бұрын

@Utkarsh Amitabh Srivastava no custom on below 5 dollars

@yhpeng6555 3 жыл бұрын

Hi,pcb cart offers you 20%off on first pcb order,$500off on first pcba order,here's the link:www.pcbcart.com/

@mr.m0lam0la Жыл бұрын

Man your background is sick.

@siddharthmali5841 4 жыл бұрын

Great

@patrickkeirton6458 8 ай бұрын

My experience with JLCPCB has been a nightmare.

@CanalRenaultClio Жыл бұрын

So.. if the magic icon SMT (who in hell know what is means) is not present it will not be assembled? thats ridiculous

@usertogo 4 жыл бұрын

How do they do it? They have so many different components in stock, and so many feeders on their pick and place? You get such a good deal because your board uses few different components? How did they manage to automate the whole web interface, its all very impressive, they will grab the business away from so many shops that none of us could afford anyway for such small series...

@Jadinandrews 4 жыл бұрын

It's really mind blowing, I hope their staff are well fed at least, but my western mind can not understand how they can manage small batches at this price.

@linagee 4 жыл бұрын

Maybe they have a dozen SMT machines they send your board through, and each has 64 loaders or so. Someone must have invested a large amount of money in China to put all the hardware and software together.

@JanJeronimus 4 жыл бұрын

Sure interesting. However on orders above 22 euros additional tax and handling fees can be added for me. (Netherlands).

@superdau 4 жыл бұрын

From 2021 onwards (and even worse from just next year on here in Austria...) all parcels from outside the EU will have to go through customs. I wouldn't mind the additional tax, it's only fair considering when buying locally you have to pay it. But the additional handling fee that the postal service will collect (10€ here in AT) pretty much kills China orders for me.

@Danielo515 3 жыл бұрын

What is the minimum quantity?

@thomashuet4571 8 ай бұрын

5 pcb

@electronic7979 4 жыл бұрын

👍

@lexander9686 4 жыл бұрын

Nice beard 👌 bro

@shehryarshaheen7115 4 жыл бұрын

pickle rick is the best rick. Time Travel Stuf.............

@F5VMJ 3 жыл бұрын

What is Expand and Base?? What is smtWeld and manualWeld?? Where are Basic and Extended components?? It was usable before ...now it's not. #whatamess.

@maxxg7 4 жыл бұрын

Dont forget they need to be at least 20x20cm in dimensions. One dimension lower than that will not work.

@randycarter2001 2 жыл бұрын

To be profitable in electronics manufacturing you have to be able to sell it at least 2.5 times the cost of making it. So in your case at $3 each you should charge $7.50 each. That's still quite a bargain for a display that large with built in drivers.

@fredricqjblaholtz4845 3 жыл бұрын

So... the title content actually start at 9:37.

@willj476 2 жыл бұрын

skip to 9:35 for the how to

@bharaths9479 Жыл бұрын

I have spent Rs 5500 to get my 5 Nos of PCBs that includes all the custom clearance and igst. Don't go for JLC PCB. China may give u 5 PCBs in 170Rs, when u receive that in India you have to pay Rs 5300 more. I have all the proof of payments.