Suzuki LT50 Compression Test - Bad Head Gasket!
Рет қаралды 7,461
Күн бұрынFound out why it was so easy to pull start and so loud!
Head is warped and compression is leaking out around the gasket!
Ordered a cheap top end kit and we will go from there!
Stay tuned for the next video!
Subscribe for more!
Thanks for watching!
@Hockey610 Жыл бұрын
I have a lt50 and it has no compression I don’t know how to get it running could you help me thanks
@SuperFastRc Жыл бұрын
You need a top end kit
@Hockey610 Жыл бұрын
@@SuperFastRc ok thanks is there a good brand or place to look for one
@SuperFastRc Жыл бұрын
@@Hockey610 not that i know of, i wouldn’t get the cheapest but not the most expensive either
@Hockey610 Жыл бұрын
@@SuperFastRc ok thanks so much
@zlatkofilipovic1509 2 ай бұрын
How piston go in cylinder in arrow ? Must be up or down ?
@CrashHardEnduro Жыл бұрын
How much compression should it have?
@SuperFastRc Жыл бұрын
Mine was testing around 5 psi before rebuild and after its around 40 and it runs ok lol
@joseluissaavedra4364 23 күн бұрын
That's a good compression?
@egidio6david0 2 жыл бұрын
How did it go
@SuperFastRc 2 жыл бұрын
Replaced the whole top end and still only got 35-40 psi compression…. It runs though
@egidio6david0 2 жыл бұрын
@@SuperFastRc thanks for responding!!!!. I just picked an LT80 up. Trying to figure out why I won't run. What ended up being your problem? Everything else seems pretty decent on this bike but I just started getting into it.
The Yorkshire DIY Guy
Рет қаралды 344
Marty's workshop
Рет қаралды 34 М.
Pete's Garage
Рет қаралды 2,5 МЛН
Marty's workshop
Рет қаралды 33 М.
Garage 54
Рет қаралды 4 МЛН