Embroidery Hub Ep. 10: 3D Embroidery | How To Do Puff Embroidery On Hats Tutorial

Рет қаралды 286,178

6 жыл бұрын

Thread Break Troubleshooting Guide:
info.ricoma.com/the-ultimate-...
The Ultimate Embroidery Cheat Sheet:
info.ricoma.com/the-ultimate-...
3 PROVEN TECHNIQUES TO MAKE OVER
$2,000/WEEK IN YOUR EMBROIDERY BUSINESS:
info.ricoma.com/3-proven-tech...
The Number One Factor in Determining Profitability:
info.ricoma.com/the-number-on...
7 Costly Mistakes to Avoid When Embroidering Caps:
info.ricoma.com/7-costly-mist...
Join the Ricoma newsletter for educational blogs, videos, and live webinars: ricoma.com/US/insights
In this embroidery machine tutorial episode of Embroidery Hub, Manny gives a tutorial how to do 3d embroidery on hats. Along the way you'll learn helpful embroidery tips on how to setup your digitized design for puff embroidery, making sure your puff embroidery looks clean, getting rid of excessive foam on your puff embroidery and much more! 3D embroidery is a great cost-effective way to offer more variety to your customers while being able to charge a little extra since puff embroidery has a higher perceived value. In this episode Manny uses a Ricoma MT-1501 commercial embroidery machine.
------------------------------------------------------------------------------------------------
Facebook Embroidery & Printing Business Help Group: / embroideryprintingbusi...
Join the Ricoma newsletter for educational blogs, videos, and live webinars: ricoma.com/US/insights
To learn more schedule a virtual demo today:
ricoma.com/US/virtual-demo
To learn more about our embroidery machines, visit our website:
ricoma.com/

Пікірлер: 408

@smallteach7551 6 жыл бұрын

I love how you explain the steps and include why those steps are essential. You are a great teacher!

@ricomatv 6 жыл бұрын

Thank!

@json707 3 жыл бұрын

I agree he should be in all the videos ... very well spoken.

@creolepie 3 жыл бұрын

🎯

@IanJinYaMouth 4 жыл бұрын

“The _________ Itself” 😂😂😂 homie is hella nervous. This is a great video itself. Rather informative. 👍🏾👍🏾

@katherinaroberts4859 4 жыл бұрын

Man YESSSS LOl

@natanyofsho 2 жыл бұрын

Itself itself itself!!!! Lol

@TheTonyDuxx 2 жыл бұрын

🤣🤣🤣🤣

@noelarios9410 2 жыл бұрын

Was jus thinking the same.

@THEDOPEGAME Жыл бұрын

Essentially…

@sumongosswami4722 5 жыл бұрын

the ending part of using heat technique was really a nice thing to learn.THANK you

@sandrareitnauer5033 6 жыл бұрын

Awesome video. Gives me the confidence to try this out.

@danielveronica4962 5 жыл бұрын

You did a great job. Thanks for the tips.

@omanghebreyesus5002 4 жыл бұрын

Thanks, you are good at explaining brother

@user-if4pm7hk6i 5 жыл бұрын

actually, the video itself is essentially very cool. thanks a lot :)

@AndreaMarie123 5 жыл бұрын

Каори Но actually, you’re comment itself is essentially, the funniest! 😂😂

@11media46 4 жыл бұрын

hahaha

@IvanaDraga Жыл бұрын

I love this! You just answered one of my personal life mysteries! Thank you! 💖

@ricomatv Жыл бұрын

You're so welcome!

@mvintageco3305 2 жыл бұрын

Just followed these simple instructions and it turned out fantastic!

@ricomatv 2 жыл бұрын

Great to hear!

@bridgetgainous3196 Жыл бұрын

Wow! Amazing tutorial. You did a great job!

@ricomatv Жыл бұрын

Thank you so much! We are so glad you liked it! Let us know if you have any other suggestions for videos :)

@drmiteshtrivedi 3 жыл бұрын

Great work my friend. Efficiently explained and great editing.

@ricomatv 3 жыл бұрын

Thanks for watching!

@swittle22 Жыл бұрын

Excellent. Very well explained. Thank you!

@ricomatv Жыл бұрын

Glad it was helpful!

@scottlevine8058 5 жыл бұрын

Great job bro.

@RythmSelektasCrew 4 жыл бұрын

This video was really nice IT SELF !

@foodmuzik1754 Жыл бұрын

I absolutely luv this….God Bless you Guys

@ricomatv Жыл бұрын

It was a pleasure! Let us know what else you would like to see.

@Thecyberknight1 4 жыл бұрын

im not even a small business owner, but im fascinated by these machines

@ricomatv 4 жыл бұрын

If you're interested in learning more about our machines and how they can help you start your own business, contact our product specialists here -> Ricoma.com/us/contact-us

@DA-vc7tn 3 жыл бұрын

Excellent tutorial, thanks!

@ricomatv 3 жыл бұрын

Glad you enjoyed it!

@adnan_emanuel 4 жыл бұрын

very informative video thanx bro

@deannaholliday9755 3 жыл бұрын

Great Video, I can't wait to give puff embroidery a try!

@ricomatv 3 жыл бұрын

Make sure to post your creation on social media and tag us so we can see it!! Thanks for watching!

@UseYourManners123 3 жыл бұрын

Hi Manny! Just was I was looking for! Ty! 🤩

@ricomatv 3 жыл бұрын

SO happy it was helpful!

@BIGDaddy504 3 жыл бұрын

All of my favorite hats have the puffed looked and have always loved the look and wondered how is was done. Recently I started hand embroidery to pass the time and wanted to see if I could ever accomplish that level of detail. This video is great and explains everything, I don't have a machine but now I understand the effect.

@ricomatv 3 жыл бұрын

Thanks for watching and for your great feedback!

@gusmartinez9454 Жыл бұрын

bzm IV mvo kb( m8😅 kvpobovb bcc66zxC😮😮

@barryshelton7174 4 жыл бұрын

You do a great job explaining the process. Thanks

@alwaysatthefair 4 жыл бұрын

I appreciate you guys so much! Thankyou for giving REAL tips and process in your vids. You guys are THE BOMB

@ricomatv 4 жыл бұрын

You're welcome!

@m-con6871 2 жыл бұрын

Mate this is the best, Thank You so much for doing this.

@ricomatv 2 жыл бұрын

Thanks for watching!

@dallaswhite6501 4 жыл бұрын

you did a great job explaining thanks

@ricomatv 3 жыл бұрын

Thanks for watching!

@CaroleLeeFinna 2 жыл бұрын

fantastic tutorial. thank you

@ricomatv 2 жыл бұрын

Glad it was helpful!

@creolepie 3 жыл бұрын

Very informative, thank you

@ricomatv 3 жыл бұрын

Glad it was helpful!

@brandonrobinson1603 2 жыл бұрын

You rock, great video man

@JUMPMAN7737 5 жыл бұрын

This is stunning!

@ricomatv 5 жыл бұрын

Thanks! Glad you like it.

@debrahall5119 Жыл бұрын

You are amazing and thanks for sharing ❤

@ricomatv Жыл бұрын

You are so welcome! Thanks for watching!

@Anybody187-gc9fz 4 ай бұрын

Great video!

@ricomatv 4 ай бұрын

Glad you enjoyed it!

@0311rog 5 жыл бұрын

Great video

@kalvinabro7130 2 жыл бұрын

Love this channel🙏🙏🙏

@ricomatv 2 жыл бұрын

We appreciate that!

@plamenstavrev2390 4 жыл бұрын

Great lesson, 10x for sharing. I will do appreciate if you share your experience in digitizing for 3d puff embroidery? What should be the stitches density, do we need to put underlay, if yes which one is better - edge, parallel, zigzag... Thanks in advance...

@dripypatricks3303 5 жыл бұрын

I like the video and hoping to watch more cause am just a begner

@thiagobrenorodrigues529 5 жыл бұрын

very good!

@madelinea.8596 3 жыл бұрын

Great video thank you

@ricomatv 3 жыл бұрын

Glad you enjoyed it!

@slushjoe 5 жыл бұрын

nice thanks

@masterofphotography Жыл бұрын

Thanks!

@ricomatv Жыл бұрын

You bet! Thanks for watching :)

@RhyBeats 3 жыл бұрын

Dope Video and very informative !!

@ricomatv 3 жыл бұрын

Glad you liked it! Make sure to subscribe to our channel to see more videos like this!

@rossimakafricanboy6140 4 жыл бұрын

thanks

@ricomatv Жыл бұрын

You're welcome!

@here...justhere597 9 ай бұрын

Getting me em1010 next week. Can't wait

@ricomatv 9 ай бұрын

How exciting! Make sure to join our Ricoma Connect group > facebook.com/groups/RicomaConnect

@scud69er 4 жыл бұрын

I liked the video itself

@mvision2201 5 жыл бұрын

The Ligter to the Hat was tellem reallest clean’up technique by far!💯

@user-qi7ue5qt5p 5 жыл бұрын

Thank you for the video! How long does it take to make one cap as in the video?

@edpalmieri3470 3 жыл бұрын

Good explanation of the foam embroidery letters. Hard part is having the Puffy alphabet that is digitized for that type of embroidery.

@ricomatv 3 жыл бұрын

Agreed. Thanks for watching!

@gccreativeembroidery5617 4 жыл бұрын

You are amazing good job

@ricomatv 3 жыл бұрын

Thank you so much 😀

@cutflower36 6 жыл бұрын

Very Interesting, I have a brother now. I will be doing more research on the rooms brand. Thanks. I used a hair dryer on my puffy cap, worked well.

@ricomatv 6 жыл бұрын

A hair dryer is a great idea :) Make sure to visit our website to learn all about us: www.ricoma.us/ Let us know if you have any questions! Also if you haven't joined already, we'd love to have you in our facebook group "Embroidery and Custom Apparel Mastery" where you can join fellow embroiderers and share all your projects or ask any embroidery questions you may have: facebook.com/groups/embroiderymastery/

@suecollins3333 6 жыл бұрын

I understood that we have to use the puffy foam because the other does not work and is flameable. Is that not true

@michaelaaron18 6 жыл бұрын

Love this! Can you do 3D puff on a sweat shirt?

@ricomatv 6 жыл бұрын

Hi Michael, it would be the same process as embroidering 3D puff on a beanie, which we have a video on: kzfaq.info/get/bejne/bLKIicyIxtLXf4U.html , but we will put your request on the list for future episodes!

@kurupt8308 Ай бұрын

I’ve learned burning from inside the cap is better to avoid burning the front

@ricomatv Ай бұрын

Hi! Thank you for sharing this with us. Both methods have their advantages, and the choice depends on various factors including the material you're embroidering on, the design complexity, and personal preference.

@miguelinatorres460 5 жыл бұрын

I lake work in the machine the embroidery I love

@stewartfinley 5 жыл бұрын

Utilise, itself, essentially, basically, themselves

@wilmercb 6 жыл бұрын

We need a video on adjusting the presser foot ASAP, towards 3D Puff, before my MT arrive 😬 Thanks 👍🏽

@ricomatv 6 жыл бұрын

It's on the list of videos we are shooting. We'll move it up and hopefully have it in the next couple of weeks :)

@wilmercb 6 жыл бұрын

¡Esutpendo! Looking forward! 👍🏽

@wilmercb 5 жыл бұрын

Ricoma Embroidery Machines Any idea when the video on how to adjust the presser foot for cap embroidery would be ready? 😬👍🏼

@trijokosusilo9531 5 жыл бұрын

itself is cool

@Ruck.Norris 4 жыл бұрын

Essentially.

@ricomatv 4 жыл бұрын

Thanks for watching!

@delta69er 2 жыл бұрын

Essentially, its about the depth itself, actually.

@ricomatv 2 жыл бұрын

Thank you for watching, Jake!

@nshi18gml 3 жыл бұрын

thank you for your incredibly well done precise videos! i was wondering if you might be able to help me with ?'s on ricoma machines? if so i'd love to hear from you.

@ricomatv 3 жыл бұрын

Hi there, thanks so much for watching! You can ask all of your embroidery-related questions in our Facebook support group, Embroidery and Custom Apparel Mastery. This group is meant for all lovers of embroidery with lots of resources and more members discussing topics and helping each other out and learning about Ricoma machines and other brands! We recommend you join this group as we'd love to have you! facebook.com/groups/embroiderymastery

@josephabarca302 2 жыл бұрын

Super helpful! Keywords essentially, itself. Lol

@ricomatv 2 жыл бұрын

¡Estamos muy contentos de que haya ayudado!

@Novoworks 4 жыл бұрын

So... how do we digitize properly for design in Chroma? Or is Plus or Luxe required in order to do this?

@guadalupeweaver6400 5 жыл бұрын

You explain everything in detail. However, the items you embroidered are caps. You’ve encouraged me to make a purchase of an industrial embroidery machine.

@ricomatv 5 жыл бұрын

Glad to hear that. Reach out to us if you want more information on our machines. www.ricoma.us/contactus

@coconut9857 6 жыл бұрын

Sub to your channel...love this bro!

@porterbennett7041 5 жыл бұрын

how different would it look from the em1010 to the commercial vs?

@Cathy84 4 жыл бұрын

Wonderful... thanks for the information. What embroidery machine would you recommend, for someone now starting out doing custom hats? Thanks.

@ricomatv 4 жыл бұрын

Either our TC1501 or our MT 1501!

@stephaniemccurley691 5 жыл бұрын

I see puffy hats with much higher puff. I is there any difference than just the foam to create it?

@trishwoods914 4 жыл бұрын

Great video - does it matter what .MM puffy foam you use? I see that it comes in 2mm, 3mm and larger?

@ricomatv 4 жыл бұрын

It simply depends on how pronounced you want the effect to be. All are fine.

@lazystef74 5 жыл бұрын

He likes the word “essentially “

@raulortiz547 5 жыл бұрын

Yeah, but he loves the word "Itself" more.

@chiboinoluv5658 5 жыл бұрын

He reminds me of the apparently kid 😂😂😂😂😂

@robhood670 5 жыл бұрын

If "essentially" is the word you're trying to get me drunk with, you lost my friend. I'd say take a shot everytime he says "actually".

@miguelinatorres460 4 жыл бұрын

Si hablas espanol also tambien en espanol I love embroider machines this logo is pretty

@cutflower36 6 жыл бұрын

Oh I did sign up to learn more but was asked what type of machine I have. i dont have a ricoma. I have a brother single needle right now. If I should get large, I will be looking to upgrade. So that's y I wanted to learn more on it.

@ricomatv 6 жыл бұрын

Sorry for the confusion, the machine selection is actually for you to select which machine you would like to see demonstrated.

@LucyLu70 4 жыл бұрын

Thanks for the video. Can I use temporary adhesive spray instead of tape?

@ricomatv 4 жыл бұрын

Yes, absolutely!

@remix0125 4 жыл бұрын

Awesome vid! I am having a hard time. How thick is the foam that you’re using? I have 2mm and I think it’s too thin .

@ricomatv 4 жыл бұрын

3mm foam is the best option!

@danialkhan6020 3 жыл бұрын

Hi.nice way you explained.can we use craft foam.what size of needle and what type of thread (weight).

@ricomatv 3 жыл бұрын

Yes you can use craft foam for more tips on thread and needles, watch this video -> kzfaq.info/get/bejne/jJd9ZcKSsceyh5c.html

@mensahnukunu6439 4 жыл бұрын

Very nice Good Teacher .. But pls what is the thickness of the foam

@ricomatv 4 жыл бұрын

Check description!

@teabagNBG 4 жыл бұрын

im looking for a embroidery machines for shoes, shirts (hoodies), hats and patches (puffy, 3d, chenille style and normal), can u tell me a few good machines i should google for? thx

@dawna0316 5 жыл бұрын

Does the Ricoma EM-1010 do the 3D stitch? If not, what machine model can accomplish it? Looking around to buy a embroidery machine.

@ricomatv 5 жыл бұрын

Hi Dawna, the EM-1010 is able to do 3D embroidery. If you are looking to do 3D embroidery as a business we recommend our 1501-TC or MT-1501 as they are our commercial machines and are equipped with bigger motors and can handle larger orders. Our EM-1010 is more of a hobbyist machine, so if that is what you're looking for then it will get the job done. If you'd like to find out more about our machines fill out the form on the following page and someone will gladly answer all of your questions: www.ricoma.us/contactus

@user-go5iq2ok4q 11 ай бұрын

I'm get learning to much Puff and embroidery logo

@ricomatv 11 ай бұрын

We are so happy to hear that!

@jonathanjolee1148 5 жыл бұрын

“Essentially”

@Jerusalem83 2 жыл бұрын

Amazing video. What machine would you recommend for hat embroidery? Nothing huge but a normal standard machine would be preferred. Cheers

@ricomatv 2 жыл бұрын

Hello! For our starting embroidery machine we recommend you looking into our EM-1010. Check it out below! ricoma.com/US/machine/em-1010

@AlbertoRodriguez-zx4mb 4 жыл бұрын

Did the presser foot high was adjusted after the blue thread before you do the 3d foam? How to adjust the presser foot? Great video.

@ricomatv 4 жыл бұрын

Reach out to our support team to learn how to adjust the presser foot.ricoma.com/US/contact-us

@corneliushughes8797 4 жыл бұрын

I want to see if you guys can do a video doing embroidery on the side and the back of the hat please I’m looking to buy the MT1502.

@ricomatv 4 жыл бұрын

Hello we have some videos on this kzfaq.info/get/bejne/b5iSn6ymt626lIU.html kzfaq.info/get/bejne/epamadmmq6rTh5s.html Hope it helps

@diablo7apparel655 6 жыл бұрын

@manny- How do i aadjust the presser foot to the height of the foam?

@ricomatv 6 жыл бұрын

Hi, we are going to be making a video on this subject in the coming weeks. In the meantime if you own a Ricoma feel free to call support and have a tech walk you through the process: www.ricoma.us/tech-support

@lucaslegz 8 ай бұрын

Thank you for this video. Can you tell me what size foam you used?

@ricomatv 8 ай бұрын

Hi! The size of the foam depends on the design you do and the thickness you were looking for

@lucaslegz 8 ай бұрын

@@ricomatv Thank you!

@karenramirez7225 4 жыл бұрын

Question, what if you are doing a business logo on a cap that has 3 different colors? The how would you go about matching the foam color for that? If that makes sense, thank you!

@ricomatv 3 жыл бұрын

Hi there, thanks so much for watching. This is a great question to ask in our Facebook support group, Embroidery and Custom Apparel Mastery. This group is meant for all lovers of embroidery with lots of resources and more members discussing topics and helping each other out and learning about Ricoma machines and other brands! We recommend you join this group as we'd love to have you! facebook.com/groups/embroiderymastery

@StarlynRdz 3 жыл бұрын

it would be cool if you guys show the process on the digitize process

@ricomatv 3 жыл бұрын

There are some videos on that here: kzfaq.info/get/bejne/jJd9ZcKSsceyh5c.html

@videomaster10100 6 ай бұрын

Hello, is there an additional step to set this up to tell the machine that this is a 3D design? Would love to see a video from start to finish on this type of design. Thanks so much.

@ricomatv 6 ай бұрын

Hi there! Take a look at this tutorial > kzfaq.info/get/bejne/mb2fh8mhuJPJaHU.htmlsi=y5-F_RIhf47jr8NP

@madelinescreations7718 3 жыл бұрын

Looks great. Is it a special foam or is it craft foam that you can get at Michael’s?

@ricomatv 3 жыл бұрын

Nope just regular foam from Joan Fabrics!

@amandasavedra8296 3 жыл бұрын

Love your video❤️ just bought a Ricoma 1501Tc-7s where do you get your hats?

@ricomatv 3 жыл бұрын

We use Otto Caps! You can learn more at Ottocaps.com

@amandasavedra8296 3 жыл бұрын

Thank you so much!

@sarimahismail5348 6 жыл бұрын

What kind of stich do you useon foam?satin stich or fill stich?

@ricomatv 6 жыл бұрын

Satin :)

@chrismonty69 4 жыл бұрын

Where do you buy your caps? They look really good quality.

@ricomatv 4 жыл бұрын

Hello we mostly use otto caps. Here is their site ottocap.com/

@csdurch Жыл бұрын

I there a difference in the foam one would purchase at Michael’s or Hobby Lobby than the foam used for embroidery?

@ricomatv Жыл бұрын

No difference, you can even get it from Walmart.

@felipemaganae.9558 Жыл бұрын

Excellent video! I'm from Chile and I want to start customizing caps, what do you think of the Ricoma PV-1501 to do it?, since in Chile right now it is the one they have in stock😊

@ricomatv Жыл бұрын

Hi Felipe! Congrats on taking the next step. This machine would be a great fit for caps, basically if you can hoop it, you can embroider it! It also depends at what stage your business is at!

@felipemaganae.9558 Жыл бұрын

@@ricomatv Thank you for the answer, is the beginning!🙏🏼

@casadelleon8058 2 жыл бұрын

My em1010 rubs on my snapback hat brim and also bends them could u guys do a video how to do SnapBack hats on a em1010 I’ve been trying and trying on snapbacks flex fit classic hats

@ricomatv 2 жыл бұрын

Hi there, thanks so much for watching. Yes, i will pass this suggestion on to our video team!

@lyoung2814 4 жыл бұрын

Is there any other adjustments that need to be done? I am having thread breaks only when using 3mm foam on a structured cap and 80/12 needle .... should I Do something different with tension?

@ricomatv 4 жыл бұрын

We suggest to switch out the needle to 75/11. Sometimes a thick needles is not good when running so many layers!

@csdurch Жыл бұрын

I’ve also seen two different depths of foam; a thinner version and a thicker version. Which do you use?

@ricomatv Жыл бұрын

Hi Carole, we used the regular foam that we purchased from Walmart.

@JP-hd6lb 3 жыл бұрын

Can you do 3D puff on the Ricoma EM-1010? Or do you need one or the bigger machine?

@ricomatv 3 жыл бұрын

3D puff can definitely be done on the EM-1010

@sarahricecreativellc1399 3 ай бұрын

I have the TC. Do I need to mess with tension when adding the foam?

@ricomatv 3 ай бұрын

Not really, but if you’re not getting good results, slightly looser tension gives better results on puff. But wouldn’t mess with it if no issues

@anthonymartinez2568 5 жыл бұрын

Is there a certain type of foam to use? Also, should density be changed? I have an EM 1010 and I just want to make myself a few 3D puff caps.

@ricomatv 5 жыл бұрын

Hi Anthony! We recommend 3 mm craft foam. There is foam specifically made for this purpose: allstitch.net/product/3mm-puff-foam-for-embroidery-orange-1201.cfm

@ricomatv 5 жыл бұрын

You also want to increase the density when doing 3D puff to make sure the stitches cover the foam.

@8ntnun 2 жыл бұрын

What style and or name brand hats do you find to be the best for this type of application

@ricomatv 2 жыл бұрын

Hi there, thanks so much for watching. We recommend using structured hats for 3D puff embroidery.

@8ntnun 2 жыл бұрын

@@ricomatv yes I know structured but what name brand do you prefer???🧐🧐🧐

@dimitriosgeorgakopoulos165 Жыл бұрын

Hi, Great job. The EVA foam what hardness must to be?

@ricomatv Жыл бұрын

Hi! What were you referring to? The foam for the 3D puff?

@dimitriosgeorgakopoulos165 Жыл бұрын

@@ricomatv Yes I referring for the 3D puff

@MKBuddy1 6 жыл бұрын

how thick do you do the layer (satin below the puff)?

@ricomatv 6 жыл бұрын

Hello MK Buddy, great question. You want to have to satin below the puff overlap where the puff will be about 15%-20% to avoid gaps between the puff and the regular satin stitch underneath because the thread contracts when stitched. Hope this answers your question.