EMT Conduit Bending: Four Point Saddle Bend with Multipliers, Shrink + No Charts or Apps
Рет қаралды 264,317
4 жыл бұрынKlein Tools RT250 GFCI Outlet Tester with LCD Display, Electric Voltage Tester for Standard 3-Wire 120V Electrical Receptacles Amazon: amzn.to/43F51mZ
Also see my 38 video series: "EMT Bending by Sparky Channel": • EMT Bending by Sparky ...
Klein Tools 9216 Tape Measure for electricians. It has conduit bending tables on one side! , Heavy-Duty 16-Foot Double-Hook Double-Sided Nylon Reinforced Blade, with Metal Belt Clip: Amazon: amzn.to/444nXMh
Klein Tools 935DAG Digital Electronic Level and Angle Gauge, Measures 0-90 and 0-180 Degree Ranges, Measures and Sets Angles: Amazon: amzn.to/2RyYEyO
Klein Tools 935L 24-Inch Magnetic Bubble Level with Adjustable Vial and Top V-Groove: Amazon: amzn.to/2OdGS2Q
Klein Tools Lighted Level, Magnetic Torpedo, 3 Vial, V-Groove and Magnet Track 935RBLT: Amazon: amzn.to/2LvxeF2
Klein Tools ET450 Advanced Circuit Breaker Finder and Wire Tracer Kit for Energized and Non-Energized Breakers, Fuses, and Wires: Amazon: amzn.to/43JgiTA
Leviton 5634-W 15 Amp, 120/277 Volt, Decora Single-Pole, AC Combination Switch, Commercial Grade, Grounding, White: Amazon: amzn.to/49gYlwD
Klein Tools 1009 Multi Tool, Wire Stripper, Crimping Tool, Wire Cutter, Long-Nose Multi-Purpose Electrician Tool: Amazon: amzn.to/3TZdOwU
Klein Tools K1412 Wire Cutter / Wire Stripper, Made in USA, Dual NM Cable Stripper / Cutter Cuts Solid Copper Wire, Strips 12 and 14 AWG Solid Wire
KLEIN TOOLS VDV501-851 Cable Tester Kit with Scout Pro 3 for Ethernet / Data, Coax / Video and Phone Cables, 5 Locator Remotes: Amazon: amzn.to/49cHQSg: Amazon: amzn.to/3VGpwhh
IDEAL Electrical 45-615 Reflex Super T Stripper - 8-18 AWG, Yellow, Wire Stripper with Thumb Rest, Plier Nose, Slide Lock, Textured Grips: Amazon: amzn.to/4afSRn5
IDEAL INDUSTRIES 45-112 Forged Heavy-Duty Dual NM Wire Stripper: Amazon: amzn.to/3xePsWZ
KNIPEX Tools 13 72 8 Forged Wire Stripper, 8-Inch: Amazon: amzn.to/4cxi3qV
Knipex 09 12 240 9.5-Inch Ultra-High Leverage Lineman's Pliers with Fish Tape Puller and Crimper: Amazon: amzn.to/3TI82yB
Klein Tools 51606 Aluminum Conduit Bender Full Assembly, 1/2-Inch EMT, Wide Food Pedal, Benchmark Symbols and Angle Setter: Amazon: amzn.to/3TzsYYm
Klein Tools 51604 Iron Conduit Bender Full Assembly, 3/4-Inch EMT and 1/2-Inch Rigid, Wide Foot Pedal, Benchmark Symbols and Angle Setter: Amazon: amzn.to/3xpvKb4
Klein Tools 935AB4V Torpedo Level, Magnetic, 4 Vial for Conduit Bending & More with V-Groove & Magnet Track : Amazon: amzn.to/2xEL8yz
Klein Tools 32288 Insulated Screwdriver, 8-in-1 Screwdriver Set with Interchangeable Blades, 3 Phillips, 3 Slotted and 2 Square Tips: Amazon: amzn.to/361YSSu
IDEAL 74-027 3/4" EMT ductile iron Bender With Handle: Amazon: amzn.to/2SmCduC
IDEAL 74-026 1/2" EMT ductile iron Bender w/Handle : Amazon: amzn.to/2CI9pXZ
Ideal 74-028 BENDER 74-003 W/HANDLE 1": Amazon: amzn.to/2QQdnoD
IDEAL 74-046 Aluminum Bender with Handle for 1/2" EMT Conduit: Amazon: amzn.to/2SkAMg9
IDEAL 74-047 Aluminum Bender with Handle for 3/4" EMT: Amazon: amzn.to/4cF7rX2
IDEAL INDUSTRIES INC. 35-075 Twist-a-Nut Conduit Deburring Tool w/Square Tip: Amazon: amzn.to/4cBFpM2
Southwire SDCFR Conduit Fitting Reaming Screwdriver; Heavy Duty; Dual Function; Multi Use Detachable Head; Compatible with Drill; Cushion Grip Handles for Comfort: Amazon: amzn.to/3Q7029p
Conduit Bender for 1/2-Inch EMT Conduit with Benfield Head, Wide Foot Pedal, Benchmark Symbols Klein Tools 56206: Amazon: amzn.to/2u2orFL
Klein Tools Iron Conduit Bender 1-Inch EMT, Assembled: Amazon: amzn.to/2TxplVE
Conduit Fitting and Reaming Screwdriver for 1/2-Inch, 3/4-Inch, and 1-Inch Thin-Wall Conduit Klein Tools 85191: Amazon: amzn.to/2NxWjkM
Klein Tools Assembled Iron Conduit Bender 3/4-Inch EMT: Amazon: amzn.to/2TwACWc
Klein Tools 60900 Hard Hat with Light, Non-Vented Cap Style, Padded, Self-Wicking Odor-Resistant Sweatband, Tested up to 20kV, Orange: Amazon: amzn.to/2ZVFvHM
Klein Tools 60400 Hard Hat, Non-Vented Full Brim Style, Padded, Self-Wicking Odor-Resistant Sweatband, Tested up to 20kV, White: Amazon: amzn.to/2PN0nRx
Klein Tools 60135 Kneeling Pads, Adult Mens Soft Thick Closed Cell Soft Foam Professional Tradesman Pro Pads with Handle: Amazon: amzn.to/2NObzKD
Klein Tools Tradesman Pro Large Kneeling Pad: Amazon: amzn.to/38fpnWe
Amazon Prime Student 6 month Free Trial: amzn.to/2J4txZw
As an Amazon Associate I earn from qualifying purchases.
Bill and sparkychannel.com are participants in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com
@SparkyChannel 2 ай бұрын
Klein Tools 86225 Double Hook Magnetic Tape Measure with conduit bending tables, 25-Foot: Amazon: amzn.to/35VZEjP Also, see my 38 video series: "EMT Bending by Sparky Channel" here: kzfaq.info/sun/PLSD43kAzjUIT9C0yzPTkqULBCmJXX_goh
@yournotawesomebutiam 4 жыл бұрын
Dude this is the Scotty Kilmer for electricians
@SparkyChannel 4 жыл бұрын
LOL! Good one, thanks! 2 more EMT bending videos coming this weekend. :) Check them out if you get a chance.
@travisburt1317 3 жыл бұрын
I was thinking the same thing lol. Sounds just like him
@christopherbrewer222 3 жыл бұрын
That is spot on..😆
@RANDOMPEPSIBOTTLES 2 жыл бұрын
Thought that the other day from one of his videos
@SWMP1523 2 жыл бұрын
But the difference is this guy is cool. Scotty kilmer just preaches Toyota and says everything else is junk
@bradleykneece7516 3 жыл бұрын
I just started my 1st year apprenticeship and I have to say that I'm learning alot from your videos. Thank you so much.
@SparkyChannel 3 жыл бұрын
Best wishes for your apprenticeship!
@efra.arana. 4 жыл бұрын
This is the best EMT conduit bending video, thank you so much Sr.
@SparkyChannel 4 жыл бұрын
Thanks Efrain!
@tazmc2353 4 жыл бұрын
Love this Chanel perfect bends and explanations
@SparkyChannel 4 жыл бұрын
Thanks so much!
@GuruthaCaveman 3 жыл бұрын
Yup, Just took the glasses off .
@PrisonMike-_- Жыл бұрын
Sounds the exact same too!
@williamcruz7976 Жыл бұрын
Lmfao no way. That's the same thing I thought about. Both are OGs in their profession.
@MikeG-si6nx 2 жыл бұрын
Thanks, Sparky. I'm in my second month of electrician training at UEI and these videos are GOLD. I'm trying to get through the entire series because they get to the point and come from field experience, not sterile lab environments. I Appreciate your efforts Sir.
@SparkyChannel 2 жыл бұрын
Glad to help! Yes, I like to have the conduits start at a box or fitting and end at a box or fitting, similar to a job environment. Good luck Mike!
@tombrown3072 4 жыл бұрын
Hey Bill, glad to have you back! Just wanted to say your old videos of pipe runs helped me figure out the math involved back when I was non-union. Now I'm in the union (IBEW local 58 Detroit), and getting a great education, but I still love the way you do your walk-through demonstrations!
@SparkyChannel 4 жыл бұрын
Thanks Tom! Cheers from San Diego!
@Bapuji42 Жыл бұрын
This dude is legit. Should be required watching for electricians.
@SparkyChannel Жыл бұрын
Thanks so much!
@rclark641 3 жыл бұрын
I love the finished work of well bent EMT. Very professional results!
@davidlujan8088 2 жыл бұрын
Hey Sparky, love the vids.. I'm starting school next week.👍.. yesterday I did a 4 point saddle bend came out great.. my journeyman just gave it a little tweak.🤙. Gonna go back through your vids and try to get ahead of the guys in class. Thanks for your wisdom.
@jhosk 3 жыл бұрын
Great video! How things have changed over the years! Remember learning to bend conduit, was told to write this down, then told get to work. Years ago it was a complete sink or swim attitude in the industry, even the apprenticeship was designed around weeding out the weak, started off with 140 student and ended up with less than 20.
@lucasburdzinski213 2 жыл бұрын
Hello, sir. I've been working as an electrician for 7 years now and wanted a quick brush up on bending. This was the best explanation I've seen for bending (also enjoyed your 3 point saddle video). I'll be forwarding these videos to my apprentices! Thanks for taking the time to make these videos!
@SparkyChannel 2 жыл бұрын
Thanks Lucas!
@tylersargent2183 6 ай бұрын
Question, for the 3rd mark added on the conduit being 7 1/4” away from the first mark made; is that measurement the actual width of the obstruction? And if it is, is the 3/4” shrinkage factor applied to the width of the obstruction as well? Or is it not added? The first mark is distance to obstruction plus 3/4” so it’d make sense to add 3/4” to the width of the obstruction right or no?
@andrewalter3291 Жыл бұрын
Finally someone made me understand shrinkage
@SparkyChannel Жыл бұрын
Excellent!
@AngelRomero955 Жыл бұрын
Haha my wife did that for me 😢
@richfriend4418 4 жыл бұрын
You’re the man Sparky 👍🏼
@SparkyChannel 4 жыл бұрын
Thanks so much Rich!
@edgargonzalez6922 2 жыл бұрын
This is golden! Very easily explained I understood 100% and learned something new about the Klein tape measure
@SparkyChannel 2 жыл бұрын
Excellent!
@GerstBladeworks 2 жыл бұрын
Man I have been a sparky for 11years and I still find very valuable knowledge on your channel ,even if In this case it's about a new tool!!! Lol 🤙 god bless you sir!
@SparkyChannel 2 жыл бұрын
God Bless you as well!
@JoseMendoza-mv1ig 3 жыл бұрын
Thanks for dropping some knowledge... Really helps me prep for lab days 👌🏽
@SparkyChannel 3 жыл бұрын
Excellent!
@capt.chloroform2679 3 жыл бұрын
Very informative! I like to use center of bend for everything. Especially for saddles, that way I can just use the push through method.
@xelaju8 3 жыл бұрын
I like Sparky. He is a good instructor. Thank you.
@ricardoaguirre7694 2 жыл бұрын
Thank you so much for the lesson!!...I bought the Klein tape measure and the digital level, and I must say they are great tools!!...Thanks again
@SparkyChannel 2 жыл бұрын
Glad it was helpful!
@truthbetold9092 3 жыл бұрын
I've struggled with 3 and 4 points, but I attempt them when I get the chance. Your videos have been very helpful. Thank you for your tips
@SparkyChannel 3 жыл бұрын
My pleasure, thanks!
@teebamos7350 Жыл бұрын
I found your video by accident, but I have subscribed and found your explanations very easy to understand. I used your 3 point technique today and it was perfect !!
@SparkyChannel Жыл бұрын
Excellent!
@G-Ovalle 3 жыл бұрын
Thank you so much Mr. Sparky. Best explanations on KZfaq. 🙏🏻
@SparkyChannel 3 жыл бұрын
You're very welcome!
@JCCharts 3 жыл бұрын
Just a phenomenal channel!! Thank you for everything Sparky Channel!! You make me realize that everything is pretty simple and that I just need to quit overthinking it. 👍 Edit: four bend saddles used to give me headaches when I was an apprentice
@SparkyChannel Жыл бұрын
Way to go!
@banjothehammer6708 Жыл бұрын
I wish Bill was my journeyman. He could answer any dumb question I have even if it didn’t make any sense. 😂
@SparkyChannel Жыл бұрын
LOL! Good one! If it wasn't for dumb questions, no one would learn anything.
@jasonscollection6357 3 жыл бұрын
Thanks for helping me understand 3 and 4 point saddles Sparky!
@SparkyChannel 3 жыл бұрын
Happy to help! Thanks!
@We-are-a-family-of-1-gd7ju 10 ай бұрын
Learn from the old to learn from the best. I'd hope ur advertising of the objects is cheaper than our store prices 😆
@SparkyChannel 2 ай бұрын
Thanks! Prices are always changing, so compare prices.
@georgioe8553 3 жыл бұрын
Thank you sensei. I’ve been learning a lot from your videos.
@SparkyChannel 3 жыл бұрын
My pleasure, thanks Georgio!
@johnmaina5809 3 жыл бұрын
Very aspiring... ."Hakuna Matata" all of your episodes are educative Thanks for sharing.
@SparkyChannel 3 жыл бұрын
Yes, Hakuna Matata!
@michaelhinchey 20 күн бұрын
4 bend saddle ... All bends on arrow and hook towards the middle. ✅
@germanarellanocampos5119 2 жыл бұрын
Best video ever. He is a master at his craft thanks
@SparkyChannel 2 жыл бұрын
Thanks so much!
@FaithwWorks 2 жыл бұрын
great demonstration. thank you for the lesson
@SparkyChannel 2 жыл бұрын
You are welcome!
@ItsBetrix 5 ай бұрын
Was always a fan of Ron kipper from ideal but I think sparky channel has helped me so much more!
@SparkyChannel 2 ай бұрын
I have watched all of Ron's videos. I love watching them!
@ItsBetrix 2 ай бұрын
@@SparkyChannel glad to hear I think everyone has their own tips and tricks just like my journeymen tell me, I’m a second year apprentice in trade school in the IBEW, I appreciate your response sir!
@SparkyChannel 2 ай бұрын
@@ItsBetrix Best wishes!
@alejandrocaceres7361 Жыл бұрын
Hi Mr Bill, thanks for your lessons
@SparkyChannel Жыл бұрын
No problem, thanks!
@lanceleavitt7472 2 жыл бұрын
Boring for the pros, fascinating for us amateurs. --- Thanks for the great upload. ---
@SparkyChannel 2 жыл бұрын
Glad it was helpful!
@chrisfyfe9212 3 жыл бұрын
Bill , you are a Witch , when comes to bending . I dig the new Tape measure !
@SparkyChannel 3 жыл бұрын
Thanks Chris!
@ourleopardtortoises6543 3 жыл бұрын
Great video I need a tape measure like that
@pinecone9045 Жыл бұрын
Boom ! Great vid Sparky !! Thanks
@SparkyChannel Жыл бұрын
No problem, thanks!
@benjaminescalante4274 4 жыл бұрын
I like the way how you explain things up. But the question is ? Do you just add the shrink once or you add it on to both side ?
@sergiomansilla 3 жыл бұрын
Excelente explicacion !!! Grafica !!!! Saludos desde argentina
@SparkyChannel 3 жыл бұрын
Cheers from San Diego!
@TheJugster1 4 жыл бұрын
Very detailed educational videos , love it , God Bless Sir .
@SparkyChannel 4 жыл бұрын
God Bless you as well!
@djdoubled6970 2 жыл бұрын
Awesome Explanation! Thumbs Up!
@SparkyChannel 2 жыл бұрын
Thanks DJ!
@daviddelacruz611 3 жыл бұрын
Awesome video Bill.
@SparkyChannel 3 жыл бұрын
Thanks David! 👍
@mikeking3110 2 жыл бұрын
Nice work!
@SparkyChannel 2 жыл бұрын
Thank you! Cheers!
@paulherlichka6862 2 жыл бұрын
For the 3rd mark, it’s the distance across the obstruction minus shrinkage?
@omarhu 3 жыл бұрын
Anybody else get Scotty vibes from Bill?!?! Warm up you engines!!!!! Are they related?
@trooper11c 2 жыл бұрын
Somebody is getting a little love from Klein;)
@matthewstringer4424 3 жыл бұрын
Great video!
@SparkyChannel 3 жыл бұрын
Glad you enjoyed it, thanks Matthew!
@shanegreen268 2 жыл бұрын
Thank you for sharing your knowledge Sir
@SparkyChannel 2 жыл бұрын
My pleasure, thanks Shane!
@shanegreen268 2 жыл бұрын
@@SparkyChannel you bet. You're Videos are Awesome
@alecthenice8115 3 жыл бұрын
this is getting me through my exam, thank you
@SparkyChannel 3 жыл бұрын
Excellent! Where are you going to school?
@alecthenice8115 3 жыл бұрын
@@SparkyChannel I am a first year apprentice at IBEW local 80, Norfolk VA
@SparkyChannel 3 жыл бұрын
@@alecthenice8115 Fantastic! Please say Hi to everyone for me!
@robotzombie3546 2 жыл бұрын
Klein should make tape measures with the back side having essential conduit info, concentric bend formula, ohms law etc but skip the inch measurements on the back. Also tape measures need to be slightly compact not a big block. They need magnets on the ends that won't break off.
@BigmoRivera Жыл бұрын
Great Job Sparky... The Digital Angle Gauge It Would Be Better If They Make It With The Sound Once You Get Your Angle
@SparkyChannel Жыл бұрын
Great idea!
@tdtech5500 3 жыл бұрын
I don't like bending on ground but I like your idea as water level degree Marks are more accurate. Hard to get right degree when bending in air. I know few electricians who use rim notch as their marking on conduit which is easy and less complicated. Thanks for all the videos
@SparkyChannel 3 жыл бұрын
Thanks, have a great day!
@lionheartchannel5842 3 жыл бұрын
Thanks for sharing this video ❤️
@SparkyChannel 3 жыл бұрын
My pleasure 😊
@ourleopardtortoises6543 3 жыл бұрын
Great video I also use ideal they are true
@tombrown3072 3 жыл бұрын
Another great video! Question for you: the other day (not the first time this has happened) I had to bend a saddle close to the end of a stick of pipe. What is the proper way to measure and mark for the "push through" method? I made it work somehow, but wondering what I should do next time...thank you!
@CleberLRamos 4 жыл бұрын
Very good, perfect!!
@SparkyChannel 4 жыл бұрын
Thank you! Cheers!
@plusultra1312 2 жыл бұрын
You are a life saver
@SparkyChannel 2 жыл бұрын
Thanks!
@heuliseslopez4204 2 жыл бұрын
Great video 😎👍
@SparkyChannel 2 жыл бұрын
Thanks! 😎👍
@tactica4s Жыл бұрын
Thank you friend, this video ended with my doubts about why my folds did not come out identical, greetings from Costa Rica.
@SparkyChannel Жыл бұрын
Glad I could help!
@nicknack4319 4 жыл бұрын
Sparky We need u to keep making more of these Great videos.
@SparkyChannel 4 жыл бұрын
That's the plan! Thanks!
@juantrejo10 3 жыл бұрын
Cool channel sir u explain it well I’m gonna get that tape
@SparkyChannel 3 жыл бұрын
Sounds good Juan!
@apackwestbound5946 Жыл бұрын
Thank you.
@SparkyChannel 2 ай бұрын
Welcome!
@robertmarquez3025 3 жыл бұрын
Thanks for your video verry helpful
@SparkyChannel 3 жыл бұрын
You are welcome, thanks Robert!
@robertmarquez3025 3 жыл бұрын
I bent 14 4 points with help from your video today
@MrThirtyFour Ай бұрын
Thanks..cheers
@Sorbe1 3 жыл бұрын
@Sparky Channel: Could you do a show on how properly air bend 3/4" conduit. It's pretty difficult and FAILED HARD on 3/4". I tried doing this several times with 3/4" conduit, and messed up each time. The last time, the conduit and bender slipped in the air and I got injured badly. Both my left little finger and my left big toe got seriously SMASHED when it cut loose. Enough so they both turned black and I'm losing my fingernail and my toenail now..
@georgie_the_cockatiel4232 4 жыл бұрын
Awesome video!! Can you do a video on parallel offsets
@SparkyChannel 4 жыл бұрын
Thanks! Yes, I do have a video on parallel offsets. Also see Sparky vs the Pros... It's fun and educational too. Thanks!
@josephgatewood6647 3 жыл бұрын
Good job buddy.
@SparkyChannel 3 жыл бұрын
Thanks Joesph!
@michaelhinchey 11 ай бұрын
I watch all of your videos. You have so many ways for 4 bends and 3 bends. Some push through and some traditional. What is your go to methods while in the field?
@SparkyChannel 11 ай бұрын
Usually traditional method.
@justdoit8613 2 жыл бұрын
Thank you sir God bless
@SparkyChannel 2 жыл бұрын
Same to you!
@thomasthewatchman 2 жыл бұрын
who would ever dislike this?
@SparkyChannel 2 жыл бұрын
Thanks Thomas!
@CryptoManiac1776 Жыл бұрын
Similar to the shrink when you get into a pool.
@SparkyChannel Жыл бұрын
LOL! Good clean joke. I like that!
@CryptoManiac1776 Жыл бұрын
Haha. Thanks for the videos, learning a lot watching them.
@skully578 Жыл бұрын
You rule Sparky
@ABflanagan523 2 жыл бұрын
I saw you did shrink for the first offset, do you add shrink for the second offset as well?
@Makitafan 2 жыл бұрын
Only if you're trying to reach a set point. (Like a box) But, more likely the pipe will end and you'll be using a coupling. So it wont matter.
@Patrick-gm8ui 3 жыл бұрын
I have a question. You have your first marked 33’7/8” because of there is a 3/4” shrinking this one I understand. However why don’t we add another 3/4” on the other side? So that should make 1’1/2” shrinkage in total.
@LIVETOODRUM 2 жыл бұрын
The other 3/4 of shrinkage wouldnt appear until after the second set of bends. If he only did the first offset there would only be a 3/4 difference from the original length of the pipe. The distance you have to cross over your obstruction won’t grow or shrink so the center point of the bends should be a constant. I’m not sure if that made complete sense. I’ll think about it and try to figure out a better way to word it
@charlieperez6844 4 ай бұрын
Nice!
@SparkyChannel 2 ай бұрын
Thanks!
@vincentsmith4328 4 жыл бұрын
Excellent work thank you. Do you have a chart like in the 3point saddle bend video please?
@SparkyChannel 4 жыл бұрын
Here you go: pdf.lowes.com/howtoguides/783250740468_how.pdf
@vincentsmith4328 4 жыл бұрын
Sparky Channel * you are a life saviour. Thank you sir
@SparkyChannel 4 жыл бұрын
@@vincentsmith4328 No problem, thanks! 2 more EMT bending videos coming this weekend. :)
@bryansoleta2101 3 жыл бұрын
where i can buy that meter.i like that
@amodsingh7777 Жыл бұрын
Watching from india
@SparkyChannel Жыл бұрын
Cheers from San Diego!
@stevemarrocco5880 3 жыл бұрын
Hey i like the video!!! but isnt that arrow on the bender that you were using for offsets only meant for 90° bends? I thought you were supposed to use the notch for offsets
@davidzee3755 3 жыл бұрын
The notch is for your middle bend if a 3 point saddle bend and that’s all it’s used for outer bends on a 3 point saddle use the arrow as well
@SparkyChannel 3 жыл бұрын
Hi Steve. David Zee gave a perfect answer for you.
@djaztec97 Жыл бұрын
Do these principles apply for bending rigid metal conduit?
@SparkyChannel Жыл бұрын
Yes.
@Obrussify 3 жыл бұрын
How did you come up with 7 1/4 third mark ? should it be as long as you desire the length of the saddle meaning what if was 3 pipes other then 2??
@SparkyChannel 3 жыл бұрын
7 1/4" was the length of the obstruction. Yes, if the obstruction was longer than you would need more space between the middle marks.
@Obrussify 3 жыл бұрын
Thank you for your quick response I'd say that clears things up but it was a rhetorical question. I do like your demo don't get me wrong or seem to be like I'm some kind of a master pipe bender lol I seen other ways how to get the measurements like taking the distance of the obstruction and starting from the middle. Keep them videos coming buddy!!
@fernandogonzalez1044 3 жыл бұрын
Does the multiplier or shrink change with different size of conduit? So if the multiplier for a 1/2 inch conduit is 6 will the multiplier for 3/4 inch also 6?
@denvercharlebois699 3 жыл бұрын
yes it will
@AdrianThErIpPeR 3 жыл бұрын
Absolutely will.
@a-b-c628 2 жыл бұрын
Esa tabla aplica para tubería de toda pulgada?
@ElChapitofz 2 жыл бұрын
Si solo te da la medidas de reducción y eso.
@camallam Жыл бұрын
"Just grab it right there." Hearing that reminded me of John Madden for some reason.
@SparkyChannel Жыл бұрын
May he R.I.P!!!
@sindobrandnew 6 ай бұрын
10:07 😯 wow so accurate
@SparkyChannel 6 ай бұрын
Thanks!
@louiev.7006 3 жыл бұрын
You used the 30 degree bend correct? So shouldn’t the shrinkage be 3/16” per 1” and not 1/4” per 1”?
@arhodehamel2615 2 жыл бұрын
for 3/4 conduit 3/16 per inch is 22.5 degree, 1/4 per inch is 30 degree. it goes up 1/16 per inch starting with 15 degrees at 1/8 per inch
@juanzamarripa3133 3 жыл бұрын
Little disappointed you didn’t even mention benfield benders, still a good video!
@SparkyChannel 3 жыл бұрын
Benfield benders are excellent as well.
@kennethcarroll5420 Жыл бұрын
does it matter which bend you do first on the two inside bends?
@xaviermadsen607 Жыл бұрын
No it doesn’t
@nunyabidness2143 Жыл бұрын
Nope
@jacobperez2928 3 жыл бұрын
How did you get 7 1/4 from the the middle ? Thought it was 6 inches from center? Just curious
@ericstandefer9138 3 жыл бұрын
You have to add 1/4 inch for shrink for every inch of rise on that side.
@m1g1332 3 жыл бұрын
It's the total measurement of the two pipes, edge to edge
@rocco5597 Жыл бұрын
Do you add shrinkage on both sides or one side?
@SparkyChannel Жыл бұрын
One side.
@BigT-dp5qd 11 ай бұрын
So you added the 1/4" shrinkage and 2.0 multiplier but did 30° bends . Am i wrong?
@brandonbronner9365 8 ай бұрын
You are right. That is all correct info.
@jamietabaha4081 4 жыл бұрын
Is 2 -30° bends to its shrinkage isc1/4" so u just add a 1/2" for shrinkage..im confused..
@SparkyChannel 4 жыл бұрын
See my video: EMT Shrinkage To Make 3 Point Saddle Bends: Save $$ by Knowing EMT Shrink Calculations: kzfaq.info/get/bejne/jsyjnpply8zIoIU.html
@ciberflaco7 2 жыл бұрын
🔥
@IROCKID 2 жыл бұрын
How did you decide to come up 3”?
@SparkyChannel 2 жыл бұрын
The pipes were 2 5/8" off the plywood and you need to leave a little clearance so 3" was good.
@kevalva425 4 жыл бұрын
where you getting 7 1/4 from
@SparkyChannel 4 жыл бұрын
The 7 1/4" was the width of the obstacle.
@mikegranese5480 4 жыл бұрын
Is that 7 1/4 " from the outside of the first pvc to the outside of the second?
@SparkyChannel 4 жыл бұрын
@@mikegranese5480 Yes.
@DS-bl8fs 4 жыл бұрын
how come you only have to account for shrinkage on the first A/B bend and not again on the C/D bend?
@SparkyChannel 4 жыл бұрын
Hi David: I just made a video that should answer your question: EMT Shrinkage To Make 3 Point Saddle Bends: Save $$ by Knowing EMT Shrink Calculations: kzfaq.info/get/bejne/jsyjnpply8zIoIU.html
@ddaniels2901dd 3 жыл бұрын
Because the conduit is gonna shrink 1 way not both
@mistadreadman 2 жыл бұрын
I had an obstruction that was 2" high and 4.5" wide. A four point saddle wouldn't work right, the distance between bends would be too close right?
@JorgeMartinez-mp7yz 2 жыл бұрын
you could always just use smaller degree bends to put more space between the bends.
@thatssojuicy3593 4 жыл бұрын
Where did you get the 7 and a quarter
@jackjohnson1186 4 жыл бұрын
That is the measurement of the obstacle (the pipes the saddle was going over)
@SparkyChannel 4 жыл бұрын
Good answer Jack! Thanks!
Sparky Channel
Рет қаралды 445 М.
Sparky Channel
Рет қаралды 903 М.
Sparky Channel
Рет қаралды 107 М.