Box Offsets, 3 Point Saddle Bend, Parallel EMT Bends and Concentric 90° Stubs all in One Conduit

Рет қаралды 901,710

4 жыл бұрын

DEWALT DW0825LG 12V 5 Spot + Cross Line Laser, Green: Amazon: amzn.to/2z5jzOk
DEWALT DCF815S2 12-Volt Max 1/4-Inch Impact Driver Kit: Amazon: amzn.to/2XNkm5e
Klein Tools 9216 Tape Measure for electricians. It has conduit bending tables on one side! Heavy-Duty 16-Foot Double-Hook Double-Sided Nylon Reinforced Blade, with Metal Belt Clip: Amazon: amzn.to/444nXMh
Klein Tools 935RBLT Level, Lighted Torpedo Level with Magnet, 3 Vials and V-Groove, Water and Impact Resistant, Great for Conduit Bending: Amazon: amzn.to/38ixHUI
You can see my 38 video series: "EMT Bending by Sparky Channel" here: • EMT Bending by Sparky ...
Ideal 74-046 Aluminum Bender with Handle for 1/2" EMT Conduit: Amazon: amzn.to/2spYnCq
Ideal 74-047 Aluminum Bender with Handle for 3/4" EMT Conduit: Amazon: amzn.to/2slKiFo
Ideal 74-026 1/2" Malleable iron EMT Bender w/Handle: Amazon: amzn.to/2rfBLjQ
Klein Tools RT250 GFCI Outlet Tester with LCD Display, Electric Voltage Tester for Standard 3-Wire 120V Electrical Receptacles: Amazon: amzn.to/3IZrHox
Klein Tools MM320KIT Digital Multimeter Electrical Test Kit, Non-Contact Voltage Tester, Receptacle Tester, Carrying Case and Batteries: Amazon: amzn.to/3xiFpQQ
Klein Tools 80016 Circuit Breaker Finder Tool Kit with Accessories, 2-Piece Set, Includes Cat. No. ET310 and Cat. No. 69411: Amazon: amzn.to/4afXjlI
Klein Tools ET450 Advanced Circuit Breaker Finder and Wire Tracer Kit for Energized and Non-Energized Breakers, Fuses, and Wires: Amazon: amzn.to/43JgiTA
Klein Tools 1009 Multi Tool, Wire Stripper, Crimping Tool, Wire Cutter, Long-Nose Multi-Purpose Electrician Tool: Amazon: amzn.to/3TZdOwU
Klein Tools K1412 Wire Cutter / Wire Stripper, Made in USA, Dual NM Cable Stripper / Cutter Cuts Solid Copper Wire, Strips 12 and 14 AWG Solid Wire
Klein Tools 51606 Aluminum Conduit Bender Full Assembly, 1/2-Inch EMT, Wide Food Pedal, Benchmark Symbols and Angle Setter: Amazon: amzn.to/3TzsYYm
Klein Tools 51604 Iron Conduit Bender Full Assembly, 3/4-Inch EMT and 1/2-Inch Rigid, Wide Foot Pedal, Benchmark Symbols and Angle Setter: Amazon: amzn.to/3xpvKb4
Klein Tools 5167 Leather Tool Pouch, 11-Pocket: Amazon: amzn.to/3DuuSCi
Klein Tools 85091 Power Conduit Reamer with Improved Bit Retention, 1/2-, 3/4- and 1-Inch: Amazon: amzn.to/2Vz5YMf: Amazon: amzn.to/350Syf8
Klein Tools MAG2 Demagnetizer / Magnetizer for Screwdriver Bits and Tips, Makes Tools Magnetic with Powerful Rare-Earth Magnet: Amazon: amzn.to/2XZsK1J
Milwaukee M12 FUEL™ Compact Band Saw Kit 2529-21XC: Acme Tools: imp.i284638.net/P0j7yN
Milwaukee M12 FUEL™ Compact Band Saw Bare Tool: Acme Tools: imp.i284638.net/rn4gBv
30-9/16 In. 12/14 TPI Compact Extreme Thin Metal Band Saw Blade 3Pk: Acme Tools: imp.i284638.net/e4vYKD
MILWAUKEE M18 FUEL™ Compact Band Saw Kit: Acme Tools: imp.i284638.net/kjgRNd
MILWAUKEE M18 FUEL™ Compact Band Saw (Bare Tool): Acme Tools: imp.i284638.net/rn4gBv
Milwaukee Compact Band Saw Reamer Attachment 49-90-2029: Acme Tools: imp.i284638.net/mgRn01DEWALT DW0825LG 12V 5 Spot + Cross Line Laser, Green: Amazon: amzn.to/2z5jzOk
Conduit Fitting and Reaming Screwdriver for 1/2-Inch, 3/4-Inch, and 1-Inch Thin-Wall Conduit Klein Tools 85191
Tables mentioned in the video: www.kleintools.com/sites/klei...
Milwaukee Hard Hats, assorted styles: Acme Tools: shrsl.com/1uqvc
Milwaukee Conduit Benders, assorted: Acme Tools: shrsl.com/1uqvj
Makita XBP03T 18V LXT Lithium-Ion Cordless Compact Band Saw Kit (5.0Ah): Amazon: amzn.to/2VnRzB4
Makita XBP03Z 18V LXT Lithium-Ion Cordless Compact Band Saw, Tool Only: Amazon: amzn.to/2Iwt8w2
DEWALT 20V MAX Portable Band Saw, Tool Only (DCS371B): Amazon: amzn.to/30b8hsK
DEWALT 20V MAX Portable Band Saw Kit (DCS371P1): Amazon: amzn.to/3045YYu
Conduit Bending Chart: pdf.lowes.com/howtoguides/7832...
Klein Tools 935DAG Digital Electronic Level and Angle Gauge, Measures 0 - 90 and 0 - 180 Degree Ranges, Measures and Sets Angles: Amazon: amzn.to/2vOvoLM
Klein Tools MAG2 Demagnetizer / Magnetizer for Screwdriver Bits and Tips, Makes Tools Magnetic with Powerful Rare-Earth Magnet: Amazon: amzn.to/2XZsK1J
Amazon Prime Student 6-month Free Trial: amzn.to/3kFkEVm
Amazon Audible Plus 30 days free! Listen to thousands of Audible Originals, audiobooks, and podcasts. amzn.to/3gF9jDC
As an Amazon Associate I earn from qualifying purchases.
Bill and sparkychannel.com are participants in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com

Пікірлер: 699

@SparkyChannel Ай бұрын

Ideal 74-046 Aluminum Bender with Handle for 1/2" EMT Conduit: Amazon: amzn.to/2spYnCq Also see: Playlist: EMT Bending by Sparky Channel: kzfaq.info/sun/PLSD43kAzjUIT9C0yzPTkqULBCmJXX_goh Playlist: Electrical Wiring by Sparky Channel: kzfaq.info/sun/PLSD43kAzjUITARtRyFqvVhmqwNm34Ck5k Playlist: 2023 NEC Video Playlist by Sparky Channel: kzfaq.info/sun/PLSD43kAzjUISg0qOUMomYe8GH6a_C2xBv Playlist: IDEAL National Championship Competition Videos from Sparky Channel: kzfaq.info/sun/PLSD43kAzjUIRfq58lAqj2dXKhTY_8QaDO

@David-uj2ms 3 жыл бұрын

This is exactly how we were taught in the IBEW. I am no longer an Inside wireman but sometimes I have to be as an Industrial mechanic. When I need a refresher your videos are a lifesaver. There is real financial value in what you are teaching. I thank you immensely for doing it for free. i happily subscribed.

@SparkyChannel 3 жыл бұрын

Thanks David! Welcome to Sparky Channel!

@noahflores5515 2 жыл бұрын

Mr sparky, you shouldda go on a tour teaching, I ll attend one of your seminars, Thanks I learned a lot with this vid.

@gustavocasas8654 2 жыл бұрын

Why are you no longer in the IBEW?

@williamfortner8476 2 жыл бұрын

I can do all but the saddle. I never got the hang of 3 points. The rest is simple.

@icthruyou4824 2 жыл бұрын

Same as me, I used to do pipe often , but since I haven’t I’ve come here for refreshers

@liamwelsh5565 3 жыл бұрын

Your the first person I've seen actually measure a box offset.

@SparkyChannel 3 жыл бұрын

It's good to teach it that way for those who are just learning this skill. Later on, when they are experienced, they can try doing it by eye.

@ReviRuling 3 жыл бұрын

Foreal but I’m not mad at it 💪🏾

@danielhady3021 3 жыл бұрын

I got into the habit of marking my box offsets after watching the Ideal video with Ron. I do it for consistency. Now I can eye ball it, but if I need to do a bunch to match I'll take the extra few secs to mark them out.

@ReviRuling 3 жыл бұрын

@@danielhady3021 you can save time by using 4 fingers from end of pipe to first mark every time without measuring

@martf4701 3 жыл бұрын

@@fredbledsoe9841 exactly. When we were allowed to run pipes in steeldeck, i automaticly knew were to put my hand on the bender and when the pipe reached it, i left my hand there and simply turn the pipe and bend it again until it reached my hand with the same feel. 2" offset quick and easy. Almost never had to correct it ..perfect offset without having to compare it with an other straight pipe. Like you said, muscle memory!

@davenag957 2 жыл бұрын

I bent my first pipe in 1977 and still doing it to this day. I learned all my tricks from watching guys like you on the job. Nothing is as pretty as a bunch of parallel pipes with perfect bands. I hate walking up to somebody else's job and having to run my stuff crooked so that it looks straight because the last guy didn't take the time. When an inspector walks up and sees a nice pipe job, he knows that you know what you're doing and will be nice to you on every job in the future. I developed some good relationships with inspectors over the years this way.

@SparkyChannel 2 жыл бұрын

Thanks so much! 1977 was a good year! Yes, it's important to gain the trust of an inspector by having him respect your work!

@davenag957 2 жыл бұрын

@@SparkyChannel I was 15 when I learned from my first mentor. Another man I worked with was an old gray guy in his mid 70s. The man knew his stuff! Another taught me that I'm not just bending pipe, I'm covering wire. I always keep the wire and pull in mind when you're running your pipe. You're not just connecting boxes.

@touchofgrey8922 2 жыл бұрын

I started in 80. Still doing it to this day. Pipe work is nice...but, as a 1 man show, I don't have the time to make it perfect. You can make your bends a bit long long and trim with a recip saw. Time is $, couplers are cheap. Makes for a good video. Apparently I don't like bending over my work to check angle degrees. I was glad to finally see the bender head in the air, not on the ground. That's my .02

@richmaint 3 жыл бұрын

I Like this Guy, I'm in my 26th year of electrical, and I appreciate seeing other vets.

@SparkyChannel 3 жыл бұрын

Thanks so much Rich!

@Dallastexas1215 3 жыл бұрын

I have been plumbing for about 28 years, just kinda stuck with it, but working alongside electricians has always made me jealous. you guys have the best tools and the cleanest tools. If I had to do all over again, I would definitely be a Sparky. Great video.

@LayneCocaine 3 жыл бұрын

I went into electrical because my dad was a drywall finisher and I wanted to go into the trades too, he said I should be a plumber or an electrician because theres more work year round up here in Wisconsin. I went with electrical cause I always liked math and computers, I really like it, but I like building my house overall too.

@SparkyChannel 3 жыл бұрын

I worked professionally as a concrete finisher, plasterer, roofer, plumber, carpenter and draftsman. I became jealous of the electrician's like you did so I became one. IMO it's the best trade. Thanks!

@Hogiedaddy 3 жыл бұрын

I cant beleive this is free. God bless you man. Id pay you just to have a few hours of your time to learn more. I start today as an apprentice doing conduit bending. Im nervous but excited at the same time. Thank you for taking your time and showing us.

@SparkyChannel 3 жыл бұрын

GBY as well! Best wishes!

@davidmunoz8326 3 жыл бұрын

How's it going man?? I'm looking to start my career as well

@SparkyChannel 3 жыл бұрын

@@davidmunoz8326 Excellent! It's the best trade IMO.

@davidmunoz8326 3 жыл бұрын

@@SparkyChannel i just graduated from trade school and am looking into getting in the field. Any tips?

@Kheti1234 3 жыл бұрын

I’ve been a commercial electrician for around 35 years. Words of advice are to watch any videos you can find on electrical. There are basic videos of basic wiring and more technical videos on lighting controls, motor controls, and PLC’s for example. It only benefits you to learn as much as you can on your career. (Another suggestion, buy a GREENLEE conduit bender.There are more markings for guidance.)

@doninmichigan 2 жыл бұрын

Young guys starting out in the trade do not realize how much they've got it made nowdays, with the availability of info on the internet especially You Tube. The stuff this gentleman is teaching on his channel is essential fundamental knowledge that I learned when I started in the early 80's and you need to learn too to become knowledgeable and competent in the trade, and down the road when you test for your Master's License.

@SparkyChannel 2 жыл бұрын

Right on brother! ⚡

@bwats1991 2 жыл бұрын

I was just thinking about this the other day. So much knowledge available on the internet. I feel like a lot of people take it for granted.

@yemenbaw1 Жыл бұрын

You’re like the Bob Ross of pipe bending. Great explanation and enjoyable to watch. Thank you

@SparkyChannel Жыл бұрын

Huge compliment! RIP Bob!

@franklindiaz4411 3 жыл бұрын

The world needs people like you champion. Thanks for your video.

@SparkyChannel 3 жыл бұрын

My pleasure, thanks Franklyn!

@bennylee4464 2 жыл бұрын

I’m glad i can come to your channel to learn what my trade school is unable to teach Because of time restrictions, thank you

@SparkyChannel 2 жыл бұрын

I'm glad I could help!

@Al_Gore_Rhythmn Жыл бұрын

As a 1st year apprentice this was immensely helpful. You explained it in a way that leaves absolutely zero questions.

@SparkyChannel Жыл бұрын

Great to hear! Thanks!

@PoshingtonSpark Жыл бұрын

What a great resource for electricians. Completed my apprenticeship and now going to test with the ibew. These bends are the exact ones i have to study for my JW test

@SparkyChannel Жыл бұрын

Fantastic! You can do it!

@jakehart9891 4 жыл бұрын

I just started my first site Monday as a jw. Bending emt is and always was my thing. Always was the guy piping electrical rooms and all that. I see a lot of apprentices in these comments. My biggest piece of advice, don’t overthink this stuff, and it’s gonna take you some time to be able to bend nice and clean and find the best routes.

@SparkyChannel 4 жыл бұрын

I love it! And congrats on becoming Journeyman Wireman!

@ubrayj02 3 жыл бұрын

Did you set up a practice wall at home to work through the learning curve?

@jakehart9891 3 жыл бұрын

ubrayj02 no. Haha. I worked under a couple of old timers. Just real pain in the ass, bitter dudes that would yell and yell until it was right. It just takes time and effort man. This entire trade gives you what you put into it. Always remember, Rome wasn’t built in a day. Haha.

@oscarzaragoza6516 3 жыл бұрын

That is exactly right. Don't over think it

@kevinmcmaster9872 Жыл бұрын

the Scotty Kilmer of electrical

@SparkyChannel Жыл бұрын

LOL!

@TheFalconJetDriver Жыл бұрын

I was thinking the exact same thing! I though they must be brothers!😁🛫

@Billy-jo3bt 8 ай бұрын

I wish the IEC taught it that in depth. Thank you for taking the time to be so clear and detailed. The three point saddle was something I just could not get the concept of and you showed just how easy it was. I feel like I could go do it now.

@SparkyChannel 7 ай бұрын

Glad it was helpful!

@JustOneRedSoloCup 4 жыл бұрын

Nothing looks more professional than proper offsets, parallel bends, and concentric 90 degree stubs. _"Make it look professional"_ is such an underrated statement/request!

@SparkyChannel 4 жыл бұрын

Well said! Thanks so much, I totally agree! :)

@summerseve502 3 жыл бұрын

I actually feel smarter after watching this video lol. You made it too easy to learn.

@SparkyChannel 3 жыл бұрын

That's great, thanks Joshua!

@Foxdie525 3 жыл бұрын

Been watching you for a few years. I’m still in my apprenticeship.your a top notch electrician. Thanks for the video!

@SparkyChannel 3 жыл бұрын

I appreciate that! Thanks so much!

@user-qk8vc8bl6x 8 ай бұрын

I absolutely loved your casual demeanor on this video

@SparkyChannel 8 ай бұрын

Thanks so much. That's the way I work in real life. You live longer that way. lol! I learned it from my Dad, and I hope I can pass it on to others.

@MWorsa 3 жыл бұрын

I love looking at conduit runs in amusement parks 🙂

@SparkyChannel 3 жыл бұрын

Me too! :)

@MarcoPolo-zc6zo 3 жыл бұрын

That’s great. Years back I got questioned by security at Disneyland when I was following their fire raceways.

@SparkyChannel 3 жыл бұрын

@@MarcoPolo-zc6zo LOL! I know exactly what you're saying.

@OneEyeKillahBee Ай бұрын

This was a great video.. I’m very grateful because my instructor is not that good on teaching.

@sum2automation 3 жыл бұрын

Yup, after 40 plus years as an electrician, I must say. I'm truly grateful for the good engineers electrician and programmers that have shared skills with me over the years. I'm still learning after Years of IBEW and DBA industrial automation systems. Electrical trade is the best, I still love going to work and have never ever been without work. The science of electricity is amazing, We truly make life and the world a better place... Love to see shared knowledge and is nothing better than group's of concentric conduits installed correctly! It's an art.

@SparkyChannel 3 жыл бұрын

I sure do agree! Thanks!

@joshuabrothers-ms2eq Жыл бұрын

Thank you, I really appreciate you taking the time to share your wisdom with us- priceless

@spelunkerd 2 жыл бұрын

Interesting methodology. Sin(10 deg) = 1/5.76, which is close enough to 1/6 to remember without a calculator. And the one side 'shrink' is (1-cos(22.5))*(height/sin(22.5)) = 0.2*height, which is rounded to 3/16" per inch on an old style tape measure. With all of this complexity, it is easy to see how experienced guys choose one method, memorize the ratios, and use them every day. Best video I've found on this topic.

@SparkyChannel 2 жыл бұрын

Thanks so much!

@smiththomas64 4 ай бұрын

I could have used this back in 04. Thanks for posting! I like pipe bending videos.

@SparkyChannel 4 ай бұрын

You're welcome!

@travisbruno5964 2 жыл бұрын

Ive been bending conduit for 15plus yrs and i have to say your a great teacher so keep it up and God Bless

@SparkyChannel 2 жыл бұрын

Wow, thanks!

@whatnowok 3 жыл бұрын

Thanks sparky, I learn better by showing/ doing.

@aaronbutler9629 3 жыл бұрын

You are a gifted teacher...thank you!

@SparkyChannel 3 жыл бұрын

Thanks Aaron!

@zapantalambda 3 жыл бұрын

Watching this vid encourages me to proceed being a sparky. Thank you for this video. I enjoyed watching it.

@SparkyChannel 3 жыл бұрын

You can do it!

@samfromalaska7997 Жыл бұрын

I am a journeyman electrician in Alaska with IBEW 1547 and I adore watching your videos. I send your videos to my apprentices

@SparkyChannel Жыл бұрын

That is awesome! Thanks so much Sam. If you would like some Sparky Channel stickers write me at wpm44@yahoo.com and I'll send you some. I have 3 kinds: regular, Power Calcs and emt bending.

@maleparagonultragod8240 3 жыл бұрын

When I started reading my conduit bending book I knew that this subject was going to be easier learn visually. Now I can see the math with practical application. Thank you sir

@SparkyChannel 3 жыл бұрын

Excellent! Sounds right to me. I learn much better visually too.

@czependoza Жыл бұрын

Thank you very much you're really professional I wish we have a more people like this in the field

@SparkyChannel Жыл бұрын

Thanks so much!

@stevendaniels8652 3 жыл бұрын

Wow, thank you so much! I learn so much better after work and , at my own pace, learning from you. Priceless knowledge. Thank you again!

@SparkyChannel 3 жыл бұрын

Excellent, thanks Steven!

@cookinwithchris86 Жыл бұрын

The best teacher for bending pipe

@SparkyChannel Жыл бұрын

Thanks so much!

@mrpowerfader7962 Жыл бұрын

This video is a life saver, as it very simply explained exactly what I needed to know.

@SparkyChannel Жыл бұрын

Thanks!

@JRam757 3 жыл бұрын

Saw this while in Trade School as part of the visual learning in the Level 1 curriculum before we actually bent some conduit, was incredibly helpful

@SparkyChannel 3 жыл бұрын

Awesome, what trade school did you go to?

@Stuart68505 2 жыл бұрын

Very helpful. Nice introduction to accurately bending conduit. There sure is a lot involved.

@SparkyChannel 2 жыл бұрын

Glad it was helpful! Thanks Stuart!

@geerap8746 9 күн бұрын

Sparky you are the man just subscribed

@XeononC1 2 жыл бұрын

Its to the point without wasting screen time i love it

@SparkyChannel Жыл бұрын

Remember to take a 5 minute break b4 starting. LOL!

@johnjacobjinglehimerschmid3555 3 жыл бұрын

Now this is a tutorial. Information on why to do what you need to do. Plainly written out the data needed. Clear description of that to do as it's being done.

@SparkyChannel 3 жыл бұрын

Thanks John!

@jackal5359 Жыл бұрын

We just got into conduit bending in the level one electrical course I’m taking and this cleared up a ton of the confusion I had. Good stuff

@SparkyChannel Жыл бұрын

Excellent!

@Bendover-ry7vk 3 жыл бұрын

Just finished my trade school last year this video helped me tremendously thank you for the time out of your day and great job btw

@SparkyChannel 3 жыл бұрын

Thanks so much!

@lexb1892 Жыл бұрын

Thanks Sparky! you're the best.

@SparkyChannel Жыл бұрын

Thanks Lex!

@garydudgeon 4 жыл бұрын

You make it look easy. Thanks Sparky.

@SparkyChannel 4 жыл бұрын

Thanks so much Gary!

@joegi5826 3 жыл бұрын

This bending crap...gives me a brain tumor! I stick with plumbing better! Turd chasers...all the way!

@mikechavez9332 3 жыл бұрын

My respects 👏🏼 first journey/master electrician seen actually measure a box 📦 offset. Always been told just to eye it, and remember my first two years always going over haha.

@SparkyChannel 3 жыл бұрын

Thanks Mike!

@ulisesgranados8836 Жыл бұрын

Just learning to bend pipe. Thank you sir

@SparkyChannel Жыл бұрын

You can do it!

@danielhady3021 3 жыл бұрын

This is how I was taught in 1st yr of the IBEW program. Learning the math, shrink factors, and multipliers. I try to use this method as much as possible as opposed to cut to fit to keep myself sharp. You make it look so easy and natural. 3 pt and 4 pt saddles are really easy to mess up with dog legs etc. 1/2" emt is atleast easy to fix but it gets a lot tougher with the larger diameters or RMC.

@bobthompson914 3 жыл бұрын

Thanks so much again!! I will check out the videos soon!

@SparkyChannel 3 жыл бұрын

Please do, thanks Bob!

@heuliseslopez4204 2 жыл бұрын

Thank you so much for making these video! Simple and professional and great knowledge 😃🙌😎

@SparkyChannel 2 жыл бұрын

Thanks!

@MikeBramm 4 жыл бұрын

Another great video Bill. That wall is really starting to look like an industrial power distribution center.

@SparkyChannel 4 жыл бұрын

LOL! Thanks Mike!

@lwild04 11 ай бұрын

Omg 😮I love this channel and as new sparky this is gold!! I’m goin to make myself a board like this to practice my bends

@SparkyChannel 2 ай бұрын

Excellent!

@TeslaBoy123 2 жыл бұрын

Beautiful work after 25 years on electrical field in Chicago Illinois bending conduit I still learning 👍👍👍

@SparkyChannel 2 жыл бұрын

Fantastic! I'm still learning too!

@lincolnuland5443 Жыл бұрын

This guy is an excellent teacher.

@SparkyChannel Жыл бұрын

Thanks Lincoln!

@user-lp7px7lq4n 11 ай бұрын

Only thing I would’ve done differently is a 4 bend saddle so all the pipes look the same. That also leaves way to add on to the other pvc pipe in the future.

@stevejoos8953 4 ай бұрын

That's really smart !

@bubbacole1657 2 жыл бұрын

Thank you for the info. I will get some 1/2 inch Conduit and practice, practice, practice

@SparkyChannel Жыл бұрын

Excellent!

@sherrokinchen5253 3 жыл бұрын

Conduit bending was one of the programs I took at a technical college. It was so much fun bending 1/2”,3/4,”1” and 2” EMT.

@SparkyChannel 3 жыл бұрын

Excellent!

@davidcooper4385 3 жыл бұрын

I taught myself how to bend pipe started with 1 1/4 emt a 90 degree bend not hard at all for me...

@KenPryor 4 жыл бұрын

Excellent video. I've been learning so much from you. Thanks!

@SparkyChannel 4 жыл бұрын

Hi Ken! That's great to hear, thanks!

@keyboardbeats Жыл бұрын

This is awesome thanks for the education, from one sparky to another, Cheers 🍻from Az….

@SparkyChannel Жыл бұрын

Cheers!

@fariborzbashardoost1511 3 жыл бұрын

Another excellent video Sparky. Thanks

@SparkyChannel 3 жыл бұрын

Glad you enjoyed it, thanks!

@robertarguello1115 Жыл бұрын

Congradulations! You did excellent work. 👍

@SparkyChannel Жыл бұрын

Thanks Robert!

@skrivy5486 2 жыл бұрын

Loved this video a lot thank you so much for the clear explanation

@SparkyChannel 2 жыл бұрын

Glad it was helpful!

@Rocketman88002 3 жыл бұрын

Very good instructional, presented well, explained thoroughly and demonstrated flawlessly. I never did catch on to bending EMT the right way...methodically even though I got to help wire everything from the switch room to the transformers, circuit breaker panels, fuse boxes and outlets in a new production facility. Wish I had seen your videos back then. Retired now but not afraid now to help bend EMT. Thank you for these excellent tutorials!

@SparkyChannel 3 жыл бұрын

Hi Rene! Thanks for your years of service helping to build America!

@Ebenezernycit 2 жыл бұрын

Great Job Buddy, Thank You!

@SparkyChannel 2 жыл бұрын

No problem, thanks!

@TheFirmest 2 жыл бұрын

You're great. Beautiful work

@SparkyChannel Жыл бұрын

Thanks so much!

3 жыл бұрын

Thank you very much mate I am learning a lot with your videos.

@SparkyChannel 3 жыл бұрын

Glad to hear that! Thanks!

@marcojaimes8721 3 жыл бұрын

Beautiful tutorial sir thank you very much!!!!!

@SparkyChannel 3 жыл бұрын

No problem, thanks!

@volcomguy51 4 жыл бұрын

I enjoy the reviews and tips you share. I just quit telecom and started doing commercial electrical and what you share will be greatly used in the field.

@SparkyChannel 4 жыл бұрын

That is awesome! Thanks!

@gusabiomenpuebla Жыл бұрын

gracias MASTER, por compartir sus conocimientos

@SparkyChannel Жыл бұрын

¡Gracias!

@gerhardschemel3565 2 жыл бұрын

After years of running raceway of all types EMT GRC IMC PVC NMT and my favorite of all has to be Greenfield and no inside screw connectors! But yes I was able to do a lot of bends by feel and a general measurement mostly for length. Now the work of art that is being demonstrated is different and all angles have to line up accordingly. Most excellent presentation.

@SparkyChannel Жыл бұрын

Thanks so much!

@fredrickkehoe9817 2 жыл бұрын

Such a fantastic instructional video. Thank you thank you thank you

@SparkyChannel 2 жыл бұрын

Glad it was helpful! Best wishes Fredrick!

@goodolarchie Жыл бұрын

I just chanced on your video in the recommendations, not working with any conduit, but this is just awesome and satisfying to watch. I only occasionally bend copper and do sheet metal braking but this makes me want to run some EMT lol

@SparkyChannel Жыл бұрын

Thanks for giving Sparky Channel a watch!

@prozay6856 2 жыл бұрын

Hey bill GREAT Video!!! In my 12 years of being an residential and comercial electrician in NYC, Bending conduits of different types and sizes is almost part of every project. one thing I have never done myself is bending concentric 90s using EMT. It would be a great video to help us who know about it learn about it. 👍

@SparkyChannel 2 жыл бұрын

I have a few on the subject. Here's one: IDEAL National Championship Pro 2nd Round Parallel EMT Bends: kzfaq.info/get/bejne/i7CblJeLmrLJnY0.html

@77tropic 3 жыл бұрын

You sir, are a very good teacher. Thank you

@SparkyChannel 3 жыл бұрын

Thanks David!

@ku4nz 3 жыл бұрын

Good job teaching. Very helpful. Thanks

@SparkyChannel 3 жыл бұрын

Thanks Richard!

@luisloya1120 2 жыл бұрын

Excellent video my friend. Thank you very much.

@SparkyChannel 2 жыл бұрын

Thanks Luis!

@lolnopeJones 3 жыл бұрын

Wow this is awesome, amazing detail

@SparkyChannel 3 жыл бұрын

Thank you! Cheers!

@sukbadaimonghol1089 2 жыл бұрын

Sparky is awesome instructor.👍

@SparkyChannel 2 жыл бұрын

Thanks so much!

@RR31982 2 жыл бұрын

Awesome video, very informative. Great job! 👍 I’d love to see more

@SparkyChannel 2 жыл бұрын

Thanks, here's a playlist: EMT Bending by Sparky Channel: kzfaq.info/sun/PLSD43kAzjUIT9C0yzPTkqULBCmJXX_goh

@RR31982 2 жыл бұрын

@@SparkyChannel thank you

@Silverone858lol 3 жыл бұрын

I would just like to add, the arrow is front of bend, notch is center of bend and star is back of bend, any bend any time. I use them all. My three bend saddle is a push though with star, notch, arrow. Great video lots of ways to skin a cat. Thank you

@SparkyChannel 3 жыл бұрын

Great tip, thanks!

@kkballo2 3 жыл бұрын

Nice and clean!!

@firstnamelastname-td2in 3 жыл бұрын

the beginning of the year I started electrical work for 2 months then laid off due to the cough finally got into school for an union apprenticeship and am nervous as anything because I learned hardly anything. I hope someone like you is training me

@SparkyChannel 3 жыл бұрын

I understand. Best wishes!

@airsoftindude 3 жыл бұрын

Hey, it's not just a cough! I think there is some sneezing too.....

@-MrRichBiker1967 3 жыл бұрын

Awwwww....you will be fine, my man. I was just like you, but i came into the app. program at the age of 38, and i was the same way you were....we will show you what you NEED to know, in all aspects of being "on the jobsite', with all proper PPE. And know how. Do not fear, trust me. just do what your told, and show RESPECT to everyone that runs in your path, along your carrier. And DO NOT BURN ANY BRIDGES, its a very small union world!! be safe and ON TIME!

@brahimabdelsadek9534 3 жыл бұрын

Marvelous work.

@SparkyChannel 3 жыл бұрын

Thank you so much 😀

@NELSONG12 3 жыл бұрын

Very professional looking.

@SparkyChannel 3 жыл бұрын

Thanks so much!

@qibble455 3 жыл бұрын

Bump for your new channel op. Bet it's even better.

@SparkyChannel 3 жыл бұрын

I think so. Thanks!

@ccadama 4 жыл бұрын

@Sparky Channel. Thanks Bill for these educational videos. I hope they may spark interest in the electrical trades. College education is not for everyone and some have realized it's not for them. Tech and manufacturing jobs don't happen without the carpenters, electricians, HVAC, masons, plumbers, and other trades who build and outfit the buildings. Hope you and your family stay well and safe.

@SparkyChannel 4 жыл бұрын

Good points! Thanks and have a great day! You guys stay safe as well.

@waltmooredanwilson8754 3 жыл бұрын

Very good video. Very educational. I learned a lot from it. Thanks for sharing. Take care and God Bless.

@SparkyChannel 3 жыл бұрын

Excellent! God Bless you as well!

@silverdrillpickle7596 3 жыл бұрын

Find a job you love; never work another day of you life. Great video. 😊

@SparkyChannel 3 жыл бұрын

Nice!

@joesutherland7306 2 ай бұрын

Oh my gosh. I have a headache. Stars, arrows, notches, blue moons, and green clovers. Raised on rigid benders, just not that complicated. Also,I would recommend that beginners use the bender the way it was intended, until you get a feel for the bend, use the foot pedal and make sure you apply good foot pressure. Or you will end up with crinkled radius. If you dont apply the correct pressure at the right place when bending head up, you will end up with crinkled conduit ridius and a bow in the straight. Conduit bending is awesome, this was a great video and a great job, just adding my 2cents. I was so lucky as an apprentice 40yrs ago to have men like this to teach me.

@SparkyChannel Ай бұрын

Thanks Joe!

@jonrezboy5081 2 жыл бұрын

Nice illustration “Sparky” love your feed One thing though you forgot to show the last box offset Learning more and more from your channel

@Mkitoo 3 жыл бұрын

Learning a lot from your videos 🔥🔥🔥

@SparkyChannel 3 жыл бұрын

Glad to hear it!

@baindon719 Жыл бұрын

Wonderful ! thanks for sharing

@SparkyChannel Жыл бұрын

Thanks!

@alexandermaciag377 3 жыл бұрын

Thank you.

@SparkyChannel 3 жыл бұрын

No problem, thanks!

@veoquenoesunproblema 3 жыл бұрын

Beautiful video explanation.

@SparkyChannel 3 жыл бұрын

Thanks so much!

@dhindz2870 2 жыл бұрын

i learn alot and i always watch your channel.

@SparkyChannel 2 жыл бұрын

Great to hear!

@blackeagle2269 Жыл бұрын

Your are my teacheeeer!! I’m going to tell you that in Spanish too” tu eres mi profesooorrrr “ 😀

@SparkyChannel Жыл бұрын

¡Gracias!

@davidelizondo3970 5 ай бұрын

Truly a master

@SparkyChannel 2 ай бұрын

Thanks so much!

@MACQJR 2 жыл бұрын

Great work!

@SparkyChannel 2 жыл бұрын

Thanks!

@-MrRichBiker1967 3 жыл бұрын

I WANT YOU AS A PARTNER!!!! wow...what a on point man..great job.

@SparkyChannel 3 жыл бұрын

Thanks so much. That's an excellent compliment!

@-MrRichBiker1967 3 жыл бұрын

@@SparkyChannel I work for IBEW LCL # 3, and we rarley see excellence like you performed, in your video. you have a great persona, from A-Z. Im sure you did well for yourself/family! god bless. thank you so much for you video's, keep em' coming!

@SparkyChannel 3 жыл бұрын

@@-MrRichBiker1967 Thanks! God bless you as well! I hear you guys have been getting a lot of snow in New York. Cheers from San Diego!