Amazon: Heater Blower Motor VW Polo 9N rex.red/heater-blower-motor-vw-polo-9n * Tools rex.red/car-tools-kit-mechanic * Cleaning rex.red/car-cleaning-supplies * WD-40 rex.red/wd40 * Torx socket set rex.red/torx-set-socket-45-55-60 * Jack rex.red/car-jack * Stands rex.red/car-jack-stands-heavy-duty * Gloves rex.red/car-gloves-mechanic * Safety glasses rex.red/safety-glasses-anti-fog * Spark plug removal tool rex.red/spark-plug-removal-tool * Spark plug Gap tool rex.red/spark-plug-gap-tool * Coil puller tool rex.red/coil-removal-tool * Car fuse set rex.red/car-fuse-kit * Battery tester rex.red/car-battery-tester * Maintenance kit rex.red/car-maintenance-kit * Subscribe and Ring the Bell to watch more videos. ION HowTo rex.red/ionhowto RedNumberONE rex.red/rno Buy merch store.ionhowto.com/ Check it, buy it, post it and tag it #ionhowto or #rednumberone Join this channel to get access to perks: kzfaq.info/love/x4Qbp3iC97kQzj7e7g7slgjoin We earn money from qualifying purchases using our affiliate links. Affiliate links are marked with a star. * When you use our * links, you support this channel. As an Amazon Associate I earn from qualifying purchases.
@galaxyj1037 Жыл бұрын
Available in UAE?
@charray88594 жыл бұрын
Thank you so much I was prepared to pay someone £60 just to and see if they could find the problem and then also pay for it to be fixed and parts. Had a quick look at your video and thought I'd try. I am a woman that has no experience with cars. Was so simple to do I managed it fine. It worked! Thank you so much you have saved me money.
@AkuotDiri4 жыл бұрын
Welcome to Volkswagen: Transforming drivers into mechanics since 1937.
@IONHowTo4 жыл бұрын
It's sad but true. Most cars will do that if they still drive. I'm not a VW fan but the parts are cheap and easy to find at least. Wish I was driving a better car but this is still driving fine.
@itupetermotebegmail.commot42344 жыл бұрын
Hi
@user-tb2wz1tr8y3 жыл бұрын
Hahahah. Great response, and pretty true, at least for me. This said, I've learned a lot through the process, so it's not all bad.
@Jojo-lf3dy3 жыл бұрын
Even im becoming one with mine but still can't figure out the problem after replacing many parts
@BasszusX2 жыл бұрын
Thats right man!
@shaun77214 жыл бұрын
Didnt think this would work but gave it a try anyway. Hey presto! EPC light gone and car revving as should. Great cheap fix thanks so much!👍🏻
@dime1652 жыл бұрын
sr. thank you so much on your 9n problems article. i can't believe it took me 2 years to find your videos. greetings from a 2.0 sedan owner from brazil
@IONHowTo2 жыл бұрын
Wow thanks a lot for reading and watching! Yeah those are the biggest things I could remember.
@kostantinoskakaletris7664 жыл бұрын
Thank you man .You are the best!!!! I just did it and now it is OK.. Love from Greece.🇬🇷
@IONHowTo4 жыл бұрын
I know how you feel! 👻 Thanks for writing!
@teo131x8 ай бұрын
καλησπερα αδερφε σου δουλεψε? εχω το ιδιο προβλημα ο μηχανικο μου αλλαξε αισθητηρα μαπ διακλαδωτηρα νερου και σωληνα νερου αλλα παλι τα ιδια κατι κανει αναβει check epc k enggine και το ιδιο κανει οπως στον τυπα με το βιντεο θα το δοκιμασω και γω
@mrcapadonna16 жыл бұрын
“This is an older clip,filmed with a potatoe.” LmfAO
@IONHowTo6 жыл бұрын
😬
@burimsahiti.s2 жыл бұрын
For me it was brake light switch , cheap and superfast replacement 😊
@hatimelias74655 жыл бұрын
Mine was idling normally but jerks when i drive it at low rpms.. turned out to be a faulty egr valve i cleaned it wirh a carb cleaner and worked like a charm.
@SiboneloHlophe-nm6wk10 ай бұрын
Egr valve is a throttle body?
@samuelchowchow51046 жыл бұрын
Had epc light too, had the trottle body replaced but after few days the epc light litted again..went back to mech the dam light werent there anymore, test drive a few round nothing happen...hope ur method works. Keeping fingers crossed.
@IONHowTo6 жыл бұрын
Tried cleaning that throttle body and made it shiny but only messing with this electrical connector fixed it for me. Hope for you also! :)
@mushtez5 жыл бұрын
Did it work Samuel?
@kourosbavarsagh72886 жыл бұрын
Thanks for that saved the day and a trip to mechanics I wasn't sure whether to use wd40 or some thing else but after watching your video now I am confident to use this product and save me buying electric wire cleaner spray.
@IONHowTo6 жыл бұрын
Thanks! :) I had proper contact cleaner spray before but when using that, the problem would come back much quicker. Same for the re-circulation flap motor. I've cleaned that potentiometer because the re-circulation flap was going crazy moving on it's own. When using proper contact cleaner on that pot it would last a lot less that WD40. Just let the car cool down a bit and use lots of paper towels/rags :)
@SiboneloHlophe-nm6wk10 ай бұрын
Carb cleaner is fine?
@SiboneloHlophe-nm6wk10 ай бұрын
@@IONHowTo carb cleaner is fine to use?
@IONHowTo10 ай бұрын
@@SiboneloHlophe-nm6wk special contact cleaner spray or wd40
@user-yl6qx8mi4s6 ай бұрын
What about if polo 6 failure to start not even turning the start or display epc light and gears? But other light like battery light, oil light and fuel Guage will displayed
@mutyabahamidu103511 ай бұрын
Have polo 2009 the check engine,Epson and spinning lights have failed to go off looses power
@aivinetuipulotu4829 Жыл бұрын
Love your fixing and saving, i will fix mine tomorrow morning, thanks you sir
@SiboneloHlophe-nm6wk10 ай бұрын
Fixed?
@ronaldaubreyhunt41154 жыл бұрын
Good advice thanks.i just bought a 2004 polo sedan 1.6 petrol and it has some issues with leaking coolant pipe somewhere near thermostat housing.will follow your advice with interest (Ron from Australia).7/8/20.
@joelchicoge3 жыл бұрын
Worked perfectly for my 2002 1.8 Beetle
@mandlazikalala11885 ай бұрын
Tnx that was helpfull
@firoznanji17713 жыл бұрын
I have a 2004 VW Polo 1.4 BBY engine. Just replaced 16 Valve Stem seals WITHOUT REMOVING THE HEAD and now the EPC light has come ON. Will try this trick and see what happens. VW's can be a pain sometimes, but good Cars to drive.
@IONHowTo3 жыл бұрын
No need to defend their brand. Hope you get it working.
@davidcasey36974 жыл бұрын
Worked in my Mk5 GTi today..was unsure but it runs fine now. EPC light gone off and scanned with OBD2 and no code.
@SolomonBafedile-dm2qs7 ай бұрын
How did you fix that because i have same problem
@KantiMotsamai-me1tn9 ай бұрын
Hi my car is having a problem of losing power sometimes there machine says is maf sancer
@rakeshsoekhoe46935 жыл бұрын
I have the same problem with my vw golf 4. The engine light and epc are on. I will try this tommorow on my car. Thanks
@Hizenburgerr5 жыл бұрын
Rakesh Soekhoe did it work bro
@sunnyboyphasha5107 Жыл бұрын
Hi I have a same problem didn't know how to fix it and today I took it to electrician as he said we have to change petrol pump, filter and fuel relay as the relay was keeping clicking when d car rev itself we did change all those things now the car doesn't start no spark 😠 please help🙏
@haroldsshodeinde23872 жыл бұрын
Thanks a lot for this. I'm having this same problems with my 2009 Passat FSI
@khachungnguyen83713 жыл бұрын
Thank you very much for this instruction. But i have a question. Where is this throttle body in the car? Do we need to open the engine somewhere? I am looking forward to hearing from you. Best regards from Stuttgart.
@IONHowTo3 жыл бұрын
Throttle body is behind the engine, where the air filter goes to.
@Carlosmartinhox2 жыл бұрын
Hi friend, I liked the information... look, in my case I don't have any light on the panel on, but when I travel 700km, the pole turns on several lights and almost goes down, but then everything is fine, there are no errors that crazy...🙄🤔
@IONHowTo2 жыл бұрын
Check coolant level and check that engine temperature does not rise slightly when you press harder on the gas pedal. Should be fixed in up position around 90 degrees.
@thenewrapcrew4 жыл бұрын
hey bro nice video it also worked for me but if you want a once for all solution it would be chaging the trotttle body wire plug vw sent out a bulleting adressing this issue once you rewire the trotle body connector you wont ever have to use wd on the plug ever again
@tristantopambudi3186 Жыл бұрын
I'll try it with my daughter car tomorrow, wish me luck.
@joaobatistaivodasilva7904 Жыл бұрын
Goodnight. The temperature sensor light stays on even when the car is cold. Polo 2002 1.2 9n. I already changed the water tank but it didn't fix it. Thank you if you can help. Thanks
@IONHowTo Жыл бұрын
Try to use an obd2 reader to get some error codes if any. I read some comments that it could be a bad solder joint in the dashboard but I think it might be the coolant temperature sensor. Not sure really.
@Rhys_Beer Жыл бұрын
Thank you
@ilarisa6 жыл бұрын
Thank you for this video!!! Now I know how to fix EPS light problem!!! 👻👻👻
@IONHowTo6 жыл бұрын
EPC 😂😘
@ilarisa6 жыл бұрын
Dragos Ion oh yeah 😂
@ms54524 жыл бұрын
Hello i bought this car from 10days ago , well i don't have the epc on but the car accelerates by it self like the video but for 5mins and then stop should i do this method ?
@nakatanaerastus30009 күн бұрын
Polo vivo, CLP engine, i have the some problem with EPC light on , when iam driving, thn when i have a look, i found cylinder 2 doesn't work, i tried to replace ejector, coil, spark plug, but stil the right is back, any help please!!!!
@IONHowTo9 күн бұрын
It says misfire?
@noway93032 жыл бұрын
I have the same symptoms and the car will also not accelerate. Does this happen with youra as well?
@gordonkirkpatrick6572 Жыл бұрын
Top man ,thank you for this, worked a treat!
@ChannelStonie5 жыл бұрын
My epc light came on when I was on motorways last night. I didn't notice any change in car and drive to services about 12 miles away and when I turned car of, it started again without light on and I finish my travels of 65ish miles. Confused as to why ?
@TheCrysisFIN5 жыл бұрын
Did u get The EPC light again? I got The epc light and i just shutdown and started again and no EPC light.
@loganj820yt65 жыл бұрын
It happened when me and my brother where in his Volkswagen Gli having fun in the snow it felt like it had 20 horsepower
@zaziinnocent31903 жыл бұрын
My car does the same thing bt i've change fuel fulter and filter but when they diagnose it shows the open circuit why now i'm confuse pls help me
@adriandecu68462 жыл бұрын
Maaan! Thanks very much!!! Worked instantly with contact spray!!! Mersi fain!!!👍🏻😎
@SiboneloHlophe-nm6wk10 ай бұрын
Carb cleaner?
@lovesoul303 жыл бұрын
Thank you so much. I have the same problem with skoda fabia 1.2 but my problem is that when drive upp hill and turn to the right then the epc light is on. Maybe its a matter of wires. Will give it a try today ☺️
@bekonface2 жыл бұрын
traction controls
@lovesoul302 жыл бұрын
@@bekonface I solved the problem. It was a cracker plastic hose for the pcv valve
@josephbaloyi18954 жыл бұрын
Thank you so much i was so stressed
@jasonburke25966 жыл бұрын
Thank you for this video Dragos. I have just done this to my son's car. I have subscribed to your channel too.
@IONHowTo6 жыл бұрын
Great! Thank you! 👻
@tshegofatsomathew81594 жыл бұрын
Hi my problem is when I drive my car the light come out and switch off the engine the light go away what is the problem
@alaeaddin19895 жыл бұрын
my Golf mk 4 GTI model 2002.code p2128 and epc light >> The gas pedal does not work .. but when I put my feet on the brakes moving a car and the brake pedal was working as a gas pedal and brake at the same time ,,Is there any help?
@TheFunkyman685 жыл бұрын
I thank you so mouch. 3 month noboddy find the mistake. Yesterday i saw your Video. I clean it and ist all very good. Thanks
@IONHowTo5 жыл бұрын
Cheers! 😀
@cowza1nkomo2693 жыл бұрын
Hi I tried to look at that switch but it still like that....
@georgehurley13004 жыл бұрын
THANKS so much! surprised such easy access and presto! Saved my wallet!
@aniezaliezas64514 жыл бұрын
Tks
@magicmountain24 Жыл бұрын
My 2003 elite polo has had exact issue. Revs will go up and down, then EPC light comes on the car is running very rough and eventually just turns off. Tried this trick and it worked for 24 hrs. The throttle and accelerator have been changed. Any ideas?
@IONHowTo Жыл бұрын
You used any spray?
@surajsaha67453 жыл бұрын
My EPC and stranding light on when i run vw polo and my speed meter does not work please help me
@opreabogdan42283 жыл бұрын
Incredible thanks man❤Work for me thanks for saving my money❤❤
@abmhasan4243 жыл бұрын
how to fix EPC light 2009 audi A4 Quattro. please advise
@goksi71095 жыл бұрын
Hey man...i have the same problem and i buy new throttle body and i still havee the same problem...?!?!
@IONHowTo5 жыл бұрын
Check the connector of the throttle
@mehdielgharbi41043 жыл бұрын
Thanks that was very helpful but i got a problem i smell petrol from the tail pump what should i do and what's the meaning of that i hope get answers soon and thank you
@IONHowTo3 жыл бұрын
It means the engine is running 'rich'. Probably fuel economy is not great too. There could be many reasons for that. This is one of them. Could be any of these or more: Fuel injectors, Engine wear, Spark plugs, Induction coils, O2 sensors, ECU. These are few reasons I can think of is the smell comes from the tail pipe. Otherwise it's more dangerous if petrol is leaking anywhere from the tank on it's way to the fuel injectors.
@mehdielgharbi41043 жыл бұрын
@@IONHowTo thank you for your help i really appreciate
@punter64374 жыл бұрын
Do I have to do the same thing on my polo vivo 2016 model?
@Adam-sm9dt4 жыл бұрын
Hi how can you reset break light warning on VW polo please
@JonathanDavison-vn2mq Жыл бұрын
Hi i got the same problem
@gavin60072 ай бұрын
What if the rev count doesn’t move up and down by itself But the epc light still on ?
@IONHowTo2 ай бұрын
For me it was always like that. When you get the EPC light does the engine feel like normal?
@busagerry41742 жыл бұрын
Hi just I want to know how can I fix my car that epc
@missionpassed45845 жыл бұрын
mine used to do this until i finally replaced the CAT and the front and rear sensors its been fine for years until recently i tried to rev and pull away and the stupid light came back, i stopped turned engine off waited a bit then started engine, the light stayed off all way home.
@MrDa7bour11 ай бұрын
Hi , i have vw polo 1.4 petrol 2009 , When driving the car while the air conditioning is running and I press the clutch and brake to stop the car or reduce the speed, the engine suddenly stops. I have changed many parts of the engine and the problem still exists. Note that this problem does not occur when the air conditioner is off … I changed all parts of the engine and the problem did not end. Some mechanics told me that there is a general problem with the engine compression in this type of engines ( BUD 1.4 ) and you cannot solve it unless you change the engine . .. now I completely changed the engine to a model (CGG ),, and the problem still exists.. This is going to make me crazy
@IONHowTo11 ай бұрын
You changed the whole engine and it does the same? First I would change the mechanic, get another opinion. A obd2 scan is the first thing to check for. Also the engine position sensor - flywheel g28 see my video in car playlist. Never happened to me because of the AC but could be the AC compressor or even AC refrigerant? If you get the EPC light, this video could help you.
@Smallz954 жыл бұрын
I changed the water pump, tensioner pulley and belt on a 1.2 Polo AZQ, and the throttle suddenly is a bit "awkward", but nothing bad, after driving a bit, the epc light came on and the engine just doesn't accelerated, after turning it off and on again, no EPC light and it was like before. I do have a MIL Light on but it is because of the o2 sensor. But replacing the waterpump, belt and pulley can't have anything to do with this? I mean, there is no connection and I don't know why it just began after that! Could it be because of a bad o2? I've read online that that can also be the problem. Maybe someone can help me out. Thanks
@liviumitroaica28303 жыл бұрын
Mulțumesc ,Dragoș.
@nirshadsingh53625 жыл бұрын
Hi! My car's EPC light came on and the car went into limp mode. First I changed the throttle body but still no improvement. Next I changed the Electronic accelerator unit and now the car only cranks but won't start at all.
@IONHowTo5 жыл бұрын
Needs a scan for error codes. That could give you some hint of what’s wrong.
@steveooo49155 жыл бұрын
Nirshad Singh ki
@mercianlucas12323 жыл бұрын
Did you ever find the problem?
@arceno06112 жыл бұрын
Hi i have this EPC light problem car loss power
@atefsh48056 жыл бұрын
Hi I have a 2008 FSI Golf and I have a problem in the light of EPC what name the pieces that you cleaned
@IONHowTo6 жыл бұрын
It's the throttle body electrical connector. Should be very similar on your car. If your car has those symptoms, it's worth trying to clean it.
@ezekielnwaka19842 жыл бұрын
Hi great job
@ABULBASHAR-ms9fg3 жыл бұрын
Thank you very much for this video.I bought a car vw polo 1.2 from 2004 and it has AZQ engine.The car had this EPC problem but it was not coming at starting mostly after driving 15-30 minutes epc light turn on and car goes to limp mood.I took the car to mechanic and he told me to change throttle body, throttle padel, lambda sensors and catalyst and i have done everything but problem wasn't sloved at the end mechanik told me to change the engine control module and i have ordered that but while i have ordered that i found your video and i have ordered the throttle body connector and i gave it to mechanic to change the old connector and replace with new.And now the car is not throwing any problem and running like a charm just now i am concerned about only intake temperature because in obd2 it is showing while i am driving the temperature is going up to 80 degree.Is it a bad intake temperature?
@IONHowTo3 жыл бұрын
Temp in dashboard should be straight up at around 90 celsius. I'm glad you got it sorted but that mechanic oh my... He threw parts(and your money) at the problem too much.
@gresswillvanwyk4792 Жыл бұрын
Good day
@mandlamahlangu47813 жыл бұрын
Hi i have same problem and my engine is shaking
@abomuslamalahwazi47214 жыл бұрын
Thanks a lot for this video
@willigrobbelaar2892 Жыл бұрын
Thank you for your help.!! Problem solved!!
@henzopezoa95725 жыл бұрын
Hi, I have problem wi the servostyring
@vitusngubo92714 жыл бұрын
Thanks..It works....
@hamzalahmer29415 жыл бұрын
Hello thank you for the video I’m from tunisia and maybe we don’t have the same cleaning product so can I use any product ? I’m gonna try to do this after a year and a half trying to find a solution for this problem
@IONHowTo5 жыл бұрын
You could use contact cleaner spray for electric / electronics. It won't last long like that but it's easy to repeat.
@hamzalahmer29415 жыл бұрын
Dragos Ion can you please give me the name of the product you used maybe I’ll find it here or ask someone in europe to send it to me and thanx a lot
@IONHowTo5 жыл бұрын
WD-40... the Contact had some name but don't remember. en.m.wikipedia.org/wiki/WD-40
@manyeletidixievibe44866 ай бұрын
But mine just only in sometimes when I drive it apper and go😭
@DeanBothaMusic4 жыл бұрын
My car sometimes does the same, but other times the powersteering light would go on and i would lose powersteering, the clock will reset, and an alarm will beep twice. I then switch off the car and start it again, and everything will be fine again. Do you think this will also fix my problem?
@Carlosmartinhox Жыл бұрын
Olá amigo... como você resolveu essa situação do seu vw polo? Pois tenho uma situação idêntica, mas nem um erro aparece 0 erros 🤔 mas por vezes acontece ligar abs airbag direcção... desligo, ligo, e já está tudo bem por uma semana 😂
@carmel-wayfinder54013 жыл бұрын
My car smells of a lot of petrol when I start it up I thought it was the exhaust can that be a case or is it something else
@IONHowTo3 жыл бұрын
Get it checked asap! You might have a fuel leak somewhere.
@mattholmes5305 жыл бұрын
Have you had a problem with no error code on 2002 polo going into limp with no notice. After driving fine for 500 miles plus replaced two cylinder coils and all plugs. Was running great for past month until tonight. Is there a fuel filter. It’s hard to diagnose with no code. Just popped into limp mode
@IONHowTo5 жыл бұрын
There is a fuel filter but I bever had problems with that. Coils are always going bad on these cars. 😅 When the coils in mine were bad it had misfire codes in engine scan.
@sakreth11132 жыл бұрын
I'm having the same issue after cleaning the EGR and throttle body. Do I have to disconnect the battery before cleaning this connector?
@IONHowTo2 жыл бұрын
No need to disconnect the battery but key should not be in the car/ignition.
@sakreth11132 жыл бұрын
@@IONHowTo UPDATE: your solution worked on my Seat Toledo 1M. For those who has the EPC light on after this: try to drive around for a half an hour, if you have climate control try to turn it on for a while , after this you have have a nice stable idle.
@brandonmaclellan98784 жыл бұрын
Thank you soo much bro!
@krawzzy25992 жыл бұрын
I currently have this problem after accelerating quickly. I've cleaned the connections and now the check engine light has now appeared. It is a 1.2 polo 9n 2003. Any advice is welcome. I've tried to check the codes yet non are appearing. I've ordered a new obd reader so hopefully that gives me more of an indication of what's going on
@krawzzy25992 жыл бұрын
I had rubber stuck in the throttle body. Any idea where that would of came from?
@IONHowTo2 жыл бұрын
@@krawzzy2599 rubber in tb is from the Engine Air filter housing or there is no air filter in there. Check it / have it checked asap.
@krawzzy25992 жыл бұрын
@@IONHowTo will do thank you!
@harrygamer4190 Жыл бұрын
@@IONHowTodid you fix so if so how please?
@dylangregory85032 жыл бұрын
I have a different problem with my vw polo e 58 and need help plzzzzz
@IONHowTo2 жыл бұрын
Say what it is, maybe someone can help you
@lungelongqondo63464 жыл бұрын
I would like to know how to remove the airbag warning light on my VW polo 2008
@IONHowTo4 жыл бұрын
Take it to service and get the airbag fixed/replaced.
@bogdangeorge7881 Жыл бұрын
Felicitări, in primul rand pentru iengleza, hibrid intre Iliescu și bendeac, bravo . In al doilea rând mulțumim pentru rezolvare ești foarte bun. Spune mi te rog , daca folosesc spray wd 40 contact cleaner, este ok , își face treaba? Mulțumesc anticipat,
@IONHowTo Жыл бұрын
De obicei comentariile din Romania de trolling si am oftat cand am inceput sa citesc ce ai scris dar mi-am revenit in partea 2 haha. Stiu ca normal se foloseste contact cleaner si am tot citit dece wd-40 e rau ca strica acolo contactul. Pentru mine, wd-40 merge foarte bine. Varianta clasica si ce e mai important, tine mult. Daca dai cu contact cleaner in cateva luni sau 1 an ai probleme iar. Cu WD-40 1-2 ani merge. La fel si la clapeta de recirculate - potentiometru. Era cineva de intreba mai devreme pe alt video de aia. Curata clapeta de acceleratie cu CARB SPRAY dar fara sa o misti, doar pana la clapeta in interior. Daca tot umblii acolo poti sa pornesti motorun cu filtru scos si sa dai spray scurt jumatate de secunda in clapeta de acceleratie - admisie asa se mai curata chiar pe linia unde e clapeta - poate sa fie mizerie mazga ulei sau resturi carbonizate acolo. Motorul se tureaza putin cand dai carb spray, e normal.
@bogdangeorge7881 Жыл бұрын
@@IONHowTo Mulțumesc pentru clarificare. Incerc și eu sa vad ce rezolv, eu am o Lancia, simptomele sunt asemănătoare, am văzut că și la Fabia sunt probleme. In general motoarele, mici, , care au răcire deficienta, acolo apar toate tipurile de probleme din cauza căldurii excesive cât și a " anului de fabricație". Mulțumesc
@IONHowTo Жыл бұрын
@@bogdangeorge7881 sper sa se rezolve. Poti sa ii faci un obd2 scan sa vezi ce coduri apare.
@bogdangeorge7881 Жыл бұрын
@@IONHowTomulțumesc pentru sfat. Nu afișează erori. E doar "nouă" din 2006.
@paulweller33126 жыл бұрын
Change your crankshaft sensor fixed mine
@hanao19274 жыл бұрын
It doesn't work for me. Any other ideas?
@abestrue4 жыл бұрын
THANKS MY BRO!
@kazanisilias2 жыл бұрын
Thanks a lot.
@Eryionification4 жыл бұрын
Same issue with my car, except after a couple minutes, the car falls flat and dies. Also, my Traction Control light comes on in sync with the EPC light, and happened twice after getting a full tank of fuel. Could this still be the throttle body as I've changed the TB/Maf already? Thanks!
@IONHowTo4 жыл бұрын
Get it scanned with a obd2 scanner
@Eryionification4 жыл бұрын
@@IONHowTo I got a P2637 code, even though I changed the throttle body, but I'll give cleaning the connector a shot since the connector isn't part of the unit!
@IONHowTo4 жыл бұрын
Yeah might be a problem with dirt/rust or one of the wires on the connector terminals.
@borlodanvalentin19935 жыл бұрын
Bună am un vw polo 9n3 1.2 12v bzg am probleme la prima pornire dimineața sau după ce sta vreo doua ore îmi turometul im cade și la400 de ture și îmi moare motorul ca și cum nu as avea decit un piston după ce se încălzește puțin funcționează perfect pe tester nu da nici un defect buji noi bobine de inducție noi senzor turație nou dacă ma poate ajuta cineva???
@jamesthomas67242 жыл бұрын
Nice 1 thanks
@pawelozga19053 жыл бұрын
Thank You for Lesson.
@MrGambz2 жыл бұрын
wow amazing!
@bskeys92832 жыл бұрын
Hey so you have to put the WD 40 IN the sensor thing you pulled out right? Not on the outside of it? Thanks for your video, been having the same issue and electrician changed my brake switch to no avail...
@IONHowTo2 жыл бұрын
Do not put wd-40 inside the reservoir. Only on the connector and connector socket but not inside where coolant goes. Saying it just to be super clear. This is for the electrical contacts.
@bskeys92832 жыл бұрын
@@IONHowTo Yeah that's what I meant haha the connector, defo not putting WD 40 in the coolant haha! Thankyou for the video, very helpful :) Till now my car didn't do the EPC light again but we will see
@IONHowTo2 жыл бұрын
@@bskeys9283 it might do it again in few months or years, you can spray again and it will be ok. On our car, I can't remember the last time it did this. Maybe 2-3 years ago.
@IONHowTo2 жыл бұрын
@@bskeys9283 was confused, thought your comment was on the coolant video but yeah same on both, spray the connector both sides and will be ok
@startariot56482 жыл бұрын
@@IONHowTo hey, same person here just diff account lol. So I put WD 40 in the connector like you said and the epc light came on still, but this time it didnt go limp mode completely as much, the acceleration was just really slow but it go up to 70 kmph eventually, though it felt held back a bit. Do you think I just didnt put enough on it? Wasnt the brake light switch cause that was changed too. Im gonna try to clean the throttle body next tho xD
@mohammedzeco80063 жыл бұрын
Thank you, l ppreciate
@mohamedabdirahmanahmed24366 жыл бұрын
You are perfect ....thank you👍👍
@IONHowTo6 жыл бұрын
Thank you! 👻
@Rafeeqvr5 жыл бұрын
Thanks worked for me
@abramlamoen70725 жыл бұрын
I have ar problem with my polo classic 1.4 TDI it having too much smoke White one who can tell me what can make that ?
@IONHowTo5 жыл бұрын
Check the water reservoir if the fluid there looks foamy or if you see any oil there. Check the engine oil and see if the oil is dark and clear or if it looks creamy. Engine may be burning oil or worse cooling fluid mixed with oil.