Great stainless enclosure and flood coolant Stef. Best DIY CNC mill I've ever seen.

This is the nicest self-built CNC setup I have seen to date. The enclosure is icing on the cake!

Without a doubt one of my top 3 DIY cnc builds, maybe my favorite of them all, been following this one for a long time since the castings were poured I think. This turned out is incredible man!

Absolutely no one could thumbs down this video.

It is getting more and more professional! I'd suggest a metal enclosure for the control panel, a few layers of paint and you could put a price tag on it :)

The enclosure is the most important part of a milling machine, nice work! I made mine in plexiglass entirely, now is quiet and clean, i have mine inside my apartment 😁😁 I just finished my fourth axis.

Congratulations great job. A coolant mist filter will also be needed.

Brilliant work Stef. I just watched all your videos back to back. The machine turned out fantastically! Cheers !

Someone is a great Metal Fabrication guy! Nice work. Even planning out the door drawer tracks. Nice work!

Brooo as a german "Zerspaner" i have to say for the weight of this machine and the fact you build it your self this thing mills good deam amazing bro!!!! Solid machine good programm!!!! Congrats.

best cnc home build ever .. respect

Nice work Stef!!

This is awesome! I’m currently working on a stand for my hot-rolled steel CNC mill lol. I have to move my mill to the basement from the garage so I need to make an enclosure too. It’s below freezing in the garage (or hot during the summer) which isn’t very good in terms of rust or keeping the electronics healthy.

YES! More videos please... so interesting!

Beautiful work !

Masterpiece work. Always appreciated such engineering 👏🏻👏🏻👈👉🏻🖖🏻

I'm jealous of you and your machine. Not that I need anything like it. But, I wish I had the tools and space for something like this.

Great work mate

That cuttings sounds legit. Dampening very well. I bet its machining quality is like a $75k VMC.

Very nice! The look of the enclosure reminds me of the Tesla Cybertruck.

Very nice work!

best ever seen diy cnc, amazing, extraordinary

Best diy machine ever

Nice video! To have a better view through the windows when using coolant, you might add a rotary viewport. Or, even simpler, use the solution haas haas on their vf2s: just a pipe on the door where you can stick in your airblow pistol. the pipe goes through the doors and is directed at the window from the inside. When you blow air through it from the outside, this air gets directed at the window and blows it clean of any coolant.

nice upgrades!

My favourite channel!

So cool. Thank you for sharing.

Bro, you should sell these kits or machines. Too good.

very good video..thanks for your time

Good job and very impressive

Impressive! Goed bezig!

Happy Valentine's Day Stef)

Thanks for the video. Good job, really neatly and solidly build. A bit noisy compared to some other machines I have seen, but I wonder why.

Good job mate, really. Have you got any videos from the epoxy casting process. Its hard to get good info on that and it seems you nailed it. I'm interested in doing something similar but half the size. I got your cad from grabcad and will see how scaling it down would work, but I need a lot more info before I dive in as this will be a big project with some serious $$$$ investment.

Plssssss make a video on epoxy resin aggregate, what's the mixture and it's percentage that you use in your build, plsss highly appreciated if you make it..

Replace the windows with SOLID POLYCARBONATE. It withstands impact and will not break like a stalk. All metal cutting machines and test benches are equipped with one. 4 mm. are thick enough. My machine has them.

thanks for sharing

VERY VERY NICE

350mesh silk screen for screen printing works really well as a last filter step. :)

Very interesting and awesome work! What's the coolant pump spec?

Very nice and industrial built piece! For critic, just minors , like the way covers should be taper downwards, don't just relying on touchscreen buttons only , should has more hard key buttons, toolchanger should has cover. By the way are the way bellows and their covers were purchased and of standard sizes?

Use Mate Paint or using Putin make base with texture finish first then paint on its case... With good colour combination especially mature colours..

good job man i have a question for you. your machine can cut steel?

Wow that's a great machine. How do you like that coolant? I'm using a white coolant that's great except it obviously blocks vision of the tool.

Really nice enclosure Stef! I'm looking for inspiration for the enclosure for my CNC, would you mind sharing the CAD file of the enclosure for me to look into it? Kind Regards! Tim

nice nice nice .

Amazing work on the enclosure! sorry if I missed it in a video long ago, but where do you get the way covers from, or what could I search for to find something similar?

Oh now i see how=)

hello, please tell me which spindle you installed or you can send a link to purchase, thanks

Stef, how much did you pay per square meter of the stainless sheets and where did you buy it? Thanks.

Nice work! Can't seem to find those anchors used in the epoxy bases, do you have those part numbers off hand or was that custom? Very Impressive machine, when are you mass producing? Sign me up for one!

This thing fucks!

Amazing work! I have a question, is it capable of milling steel as well?

is it cost effective to build such a beast or it's better to buy one?

im impreest wooo

Is your controller an Eding_CNC controller? How is the epoxy durability?

A beautiful machine, what is the X, Y, Z working area.🤩

this is so next level,,, What an amazing job ! (Btw the link to grab cad doesnt work)

Sir the link is not working. Can u please update sir

Hi, Love your machine really nice. Where did you get the motor from for the spindle?

You could get a few Magnetic Window Cleaners to help clear the glass.

How many you buy for this machin ? $

Super netjes stef 👍🏻 wellicht handig een “spin window” te installeren op de deur, zodat je altijd het proces kan bekijken zonder invloed van spanen en koelvloeistof. Misschien had je dit idee al?

Having any issues with chips getting on the tool holder tapers while they are in the tool changer?

Where does the noise come from, machining process or rotating spindle ?

be very carful using glass. i understand its tempered but that wont help protect you from a flying part or broken end mill. machine and enclosure look great tho.

Ziet er goed uit stef 💪 Ideaal als de spanen niet meer overal heen vliegen. Wat voor cad cam programma gebruik jij om je programma's te maken?. Ik heb nu zelf ook de Eding kaart binnen voor mijn retrofit beun project

Stef, please don't forget this:D if u will ever want to have a brother, here i am !!! take me home with you:D

Great work stef. There is a lot of vibration during running, what is the source of it?

So after going through everything building this machine. If you go back to before the project began. Would you still build it or just buy a Haas or tormach? based off the machine itself .

Sorry to write to you from the translator))) What ingredients and in what proportions did you use to fill the frame of your machine ???

how i can do donat for you for 3d model?

Is the casing of the machine stainless steel?

bedst cnc home made ever ..

Would you be interested in providing CNC machining services for people? Just a thought, you may have got enough on with your own projects. Nice video btw.

Build me similar machine. You decide your profit. What do you say? Let me know if interested. Im not joking. Sent you PM on fb. must be in the request messages.