Bought one of these a week ago and dove straight into it. Ended up back rolling a fair bit as the standard tip seems to chunk out 10% watered down emulsion at medium pressures. Thanks for the advice with the different tips, just bought some off of amazon. Great vid, thanks again

Just bought one.... and yes the instructions aren’t great, your video has helped grarly, I will like you get a smaller . Thanks again👍

Fantastic video , well and truly explained, good info to know before paint is ready to go through, hopefully see a video with it in operation , just to see the performance side of things , I'm a paint and decorator by trade and want to make the transition towards airless , especially when asked to paint new builds , good job keep it up I will like and subscribe 👍

Thanks for posting. Any tips on paint thickness? I’ve been using a Screwfix standard water based undercoat / primer and it makes fingermarks down the sides when spraying and eventually wouldn’t make any pressure just kept charging so I’m guessing possibly the paint is too thick??

This video was Very helpful thanks 👍

Can you do a video of cleaning it please? Maybe even a full tutorial? I just bought one and completely new to spraying . Also the 517 tip that comes with it seems to be stuck?

Hi. Love the video im going to get one of these as i have a rental property to do. Have you a video of them working at all?

Good job well explained bar jerky video but all good, thanks

Hi mate just bought one of these.. Are they meant to be so loud or this just when you hit the handle the generator kicks in?

Great video mate! clear and concise. I am a novice and just broke the machine out after buying it last year (took that long to get refurb done). I watched another good video and he said that the GRAKO tips fit. So I went out and bought a 210 and 310 and they don't. What make to you use? Alternatively Do you know if i can buy the spray Guard and that will fit the Erbauer gun?

Hi just got one of these, set it all up, primed it first the turned to paint but doesn’t switch off by handle just keeps spraying constant any ideas? Have I done something wrong

Do the Wagner tips fit this straight off the bat?

I just bought one of these, put it together but not used yet. What's the function of the narrow clear tube ? Where does that go ? Not in the paint I think. I'm planning to use .Emperor Creme' waterproofing 'paint' on exterior brickwork and its very viscous.

Sure a have asked but can you use different products tips ie Wagner Graco?

I was looking to buying one of these as want to get into airless spraying and I ended up getting the refurbished one it arrived and it had two left feet in box so couldn't use it 😅 ...

Where did you buy your extra tips from? Thanks Great video much appreciated 🫡👍

Great video thanks. I had spotted this unit in Screwfix but hadn’t seen a review anywhere. My only issue with Erbauer gear - and I have owned other erbauer tools I was very happy with - is that repairs/spares are difficult/impossible to come by. I really don’t hold with disposable tools in this day and age. I wonder what the after service is like with Wagner?

Great video dude

Hello, a very good video, I’ve just bought the same sprayer, and I must say it seams good value for the money, have you tried it with a whip hose, if so which one did you get, cheers 👍

Just picked one of these up and did our spare room (it’s £170 at B&Q at the minute, but 200 at screwfix!) Completely agree with your review, lovely little unit, but my god it drinks paint with the 517 tip… just used some contract matt thinned about 10-20% and a it must have gone though about 8 odd litres on a medium sized bedroom… that might be about right but it sounds a lot to me! I bought 5l of the colour we’re using and I was expecting that to do 2 coats (albeit with a roller) What tip size do you recommend for emulsion? I was happy with the 5 fan size for walls, but I think the 17 tip size is just too much - especially for a beginner. I was thinking a 515? You mentioned a 315 and 215 I think… that sounds quite narrow for walls/ceilings but I’m new at this! Also what tips did you buy, were they any good?

well im not one for commenting but i think you have just sold it to me. im doing a house up and think i need one of these now. plus need to paint the outside of the house too, the 9m pipe will be fantastic for this job. thanks for the video. keep up the good work

Do you know the maximum nozzle size you can put on it. It brings a 517 and I want to put a 525, but I don't know if it will work. Thank you

Thanks man, it's helpful

I would also recommend to anyone on the fence about buying this to get some other tips off Amazon. The tip it comes with drinks paint like there's no tomorrow so definitely go for a smaller tip!

Bought and used mine today, however it started to leak out through the spray Nozzle area of the gun 🤦🏻‍♂️🤦🏻‍♂️ any ideas why? It was secured well aswell

I just bought one, and for 220£ is no bad at all

Wanted to buy this unit and they are completely sold out in every screwfix. I hope they restock it as it seems like a great sprayer

Please can you post a link to the Amazon page where you got your extra tips???

Any advice on viscosity of paint ?

Great video, thanks

Great video.. it has convinced me to go and buy one! although most stores are out of stock. The main reason is to repaint all the woodwork in the house inc. doors, I have used WRX satinwood before but brush marks can be a pain and it doesn't say about being able to use it in an airless. What satinwood paint would you recommend?

Can you do more videos on this product. I’m in two mind whether to get this or Wagner. Also should I go with roller or airless? Does this have much overspray?

Very nice, thanks

Hi there, I need your help. When I switch On the machine, there is a noise and that noise doesn't stop until I switch off. Is that normal ?

Looking to buy this sprayer, very informative video, thank you. Could you put a link up for the compatible tips and extension bar you bought off Amazon please. Thank you.

I invested in this unit recently. Set up and priming the unit was straightforward, however, I'm struggling to find additional tips to use with the gun. I bought a Wagner 211, and whilst it fits, the machine would stop spraying. I'd change it back to the tip it was supplied with and it worked fine, put the Wagner back in and it stopped. Checked for blockages and there weren't any. Ended up going to Brewers for some advice, they ended up calling the manufacturer who advised that this unit has not been designed to work with anything other than what it comes with. Very disappointed to learn this, but I will give the tips from Amazon a go as there must be something out there that works.

Great vid! Hows the finish on wood using lacquer and/or eggshell paints? Is the atomisation very fine, do you see splutters? Could you use it on furniture or homemade cabinets?

Do you have rhe amazon link to them tips mate

Great video

They are a learning curve by the time I painted my house I was an expert with a lot of mess ups 👍🏻

Any link's on Amazon for the tips please 🙂?

Where can I buy nuzzle for this?

Hola, que tal? Tengo una duda respecto a los materiales que se pueden usar con esta máquina, mi pregunta sería; se pueden utilizar pintura sintética, esmaltes, lacas, barnices a base de disolventes ó solo se pueden utilizar productos con base de agua?

Cheers bro I was wondering for weeks would it be any good Ur after answering my questions and thoughts on it pretty clearly ...so have u used it much since this video has it paid for itself would you think !!!

Hi, i need some help. I bought this machine, but i'm struggling with it. I tried with water, and it works perfectly, but with the paint, does not work... Can you do a review with the inicial instructions, please!

You now know about tip sizes? first number is the fan width.... double the first number.. give you it in inches.. a 5, will give you a about 10" fan.. spray about 30cm away from the surface. The other two number is the orifice size (the hole the paint goes through on the tip) the bigger the number.. the bigger the hole, more paint goes through it.. or thicker paint can get through it. Smaller number will be better with thinner.. finish/woodwork paints etc. Can you alter the spray pressure on it ok?

Any chance of a video on setting this up and using?

Great video. What tip came with the sprayer.

I simply cannot unscrew the nuts that hold the trigger guard on, I need to do that to get the handle off to clean the filter. It's brand new. I don't why they fastened them on so tight, but it's utterly IMPOSSIBLE to budge either of them. Anyone else had this annoying problem?

Would you recommend this for doing walls and cellings ?

hi loved the video I'm having difficulty trying to remove filter from the gun have you any tips on how to

Hi any chance you can attach a link to the attachments you got from amazon. Thank you

Anybody there to help? I'm on my new machine. Followed the instructions step by step and was spraying away and it just stopped on me. When I turn it off and put it back to prime its working but the power just stopped on spray?

New video of this unit in use added... search 'using EAP600'

Which tip u bought from amazone i bought this sprayer wanted to spray on interior woods

I cannot get mine to work. primes up no problem. pressures no problem but it will not fire out the standard nozzle.. absolutely nagged off with it..

Cable tie on handle

Doesn't look like it would last long spray the walls and ceiling and see how hot it gets .... did it spit on any of the doors... take the gun filter out that's the first thing I do with new guns...

I believe this sprayer is capable of double the pressure of the wagner alternatives. I would fit a pressure regulator and use HEA tips at around 1000psi. Will save you a ton in paint and less wear on the pump. 1000psi on this should be around 30% power.

Link to tips on Amazon

chuck a pressure gauge on it then you know what psi your spray at 👍

Does it spray well ?

I bought this today to paint fitted MDF panel wardrobes. Im guessing the standard tip is no good for the job ?? Any ideas on what size tip i should be using please??

Not bad piece of kit considering the price of the high end equipment, but I cannot believe what a mess everything is. Paint everywhere including all over you. I used to be an offshore sprayer using airless, I was also a vehicle refinisher using both types air and airless, the latter was used on HGV Trailers. My ocd would be doing overtime trying to cope with the state of the equipment and the place lol...

Hi all, could someone please help me, I have this sprayer, went to use it for the second time yesterday, I don't know what I have done wrong but it's leaking out before the tip, I have given am extra good clean at home buy what have I done wrong, please help , in the middle of a job grr 😡😡

sold out every were here

Cowboy stuff you don't need it in a house , easy normal walls, it's only for awkward ceilings , pebble dash walls, and maybe if your doing loads of new builds

You are one messy sod 🤣

What a mess for a day's work🤦

Too much bla bla no practical videos

How much water do u mix