I like how batteries fit perfectly into these lead acid battery shell's 😍 Thanks for sharing with us awesome ideas! 👍

Awesome, my friend. 😍 💕 Thanks for sharing. 👍 Have a nice day. 🤗 ✨

That plastic bottle trick for the battery cover is genius!

Hi, great work on this set up . Even the snap bottle fit with the ridges .👍

Nice job, kind of weird that the cells fit so perfectly into the battery case! My personal preference is to twist wires prior to tinning which keep all the strands together and prevents any stray strands. Only other caution would be the fact everything is quite tight in there but in the use case with a very short discharge when starting and relatively low current charging it seems like a good solution 👏

What my dad would call American ingenuity.

এত সুন্দর একটি কাজ করে দেখানোর জন্য সকলের অবস্যই লাইক কমেন্ট করা উচিৎ।

...the music that gives shivers while waiting for an explosion... 😲💀 , very good job... 😜

Great battery build, love your shrink wrap trick be safe and careful.

Thank you, I tried it your way and it worked ❤

Great project, very smart solution👌👍🍀

3:00 a pair of wire snips is all you need if you put the case in the freezer for a few hours. The soldering of the cross pieces could be done on the bench. If a 'ladder' dia could be used the 'steps' would be made of a 'fuse wire between two cells 9@2.5ah) that has a common wire that is a tad thicker to complete the 12v s4 20ah battery. Times that by 5, you have an e-bike you can ride for a few hours.

Благодаря ти Еркан!

Excellent

Perfect presentation 👍❤️🌹🙏

Amazing work every time. Maby next time a 4s lifepo4 cells so you can use more of the capacity.

Using plastic bottles for packaging is surprisingly clever.

Nice video but, if you place a buck converter between original charging system and the battery, set the voltage to 12.4-12.6 volts it's better for the battery and the BMS.

Big like!👍👍👍👍👍✅💪Felicitări! Great video 👍👍👍😎

Thanks for sharing

excelente video, parabens pelo projeto, gratidao

16:12 Greetings From Super Extremes

It is indeed a fantastic job, keep up thanks.

Bravo beautifully done

Greetings From Super Extremes

Nice 👍🏻👍🏻 🇮🇳 Kuki 31|05|2022

Very nice thanks

Exelente trabajo...tu eres muy creativo...Thanks

SI POTREBBE AVERE LO SCHEMA DEI COLLEGAMENTI DELLE BATTERIE 😉👏👏👏👏👏👏

I think it would be better if you properly spot welded the 18650 cells with zinc plated strips, between them. I have tinned a lot of copper wiring to cells and stuff. I don't think it is the best approach for this case, a motorcycle battery, which has to endure a lot of vibration and shaking/bumping, especially if the roads are rough in your country, because there is a much higher risk of cracking a solder joint and making a short or just killing the battery pack and your precious work, faster than you would believe. Nice job though.

Top 👍🏽🔋🔋🔋🔋🔋⚡⚡⚡⚡🇧🇷

Excellent 👍👍👍😊

Very good

Otra buena idea, voltaje no ácido dirá el motor de arranque y las lámparas de alumbrado

Nice... video

This is one of the neatest hacks I've seen

Hi so much and Thank you betri impormeshn

Bravo bon électricien chapeau

Good job! 😁👍

nicely done. q1. don't you need thicker cables?for around 20-30 Amps? q2. is that bms capable of handling such amperage? q3 no heat sensor/alarm. what if bms fails and keeps overcharging? explosion and fire. I have yet to see any diyer in you tube to take into consideration safety and the limitations of lithium batteries. Good effort anyways.

Hi. I did it too, perfect. Thanks for the video.

nice video brother please what I would like to confirm is how many voltage is the battery each and how many do I need to put together to get that 12 volt 15 amp

very clever...

Qual bms vc usou?

竟然用矿泉水瓶做热缩膜，👍

Nice 😊

Super! 2 questions: 1. how does the zinc plate (not the flattened copper wire) get on top of the cell? 2, is charging the motor good for the Lithium-Ion battery? Thank!

Wish you could have explained this step by step! And where did you buy the circuit board?

it would be better to do 4s and undercharge then 3s and overcharge

Nice sir good

Best Video i Seen

Nise battry. Low cost

perfect

The 18650 lithium battery pack you inserted into the bike, does it now have the same charging source from the bike as the earlier lead acid? Thank you.

thanks

hello i'm from vietnam nice to meet you

Amazing... My question is, does the amount of charging voltage coming from the bike's charging coil affect the L(BMC) of the lithium-ion batteries... Thank you.

Скутер на аккум выдаёт 14.3V, удачи в эксплуатации.

ola meu querido me tire um grande duvida, bateria de nobreak serve para substituir as da bike elétrica???posso colocar 4 bateria de nobreak na bike elétrica o que acontece??da paera rodar um alternador de 6 bobinas com um controlador de 350w 36 a 48 usando 4 bateria de nobreak?minhas bateria são de 7 Ah

Nice video. What is the name of the tape you mount on the + and - side of li ion bat prior to soldering.

Nice

3:11 😢that sound was little bit scary balls

One thing to ask: disconnected battery voltage was 12,3 volts. battery voltage, connected to the working bike 12.2 volts. this means only one thing, alternator on this bike is not working or missing or disconnected. Otherwise how the original lead acid battery is going to be charged? Lead acid batteries require around 13,5-14 volts DC in the electrical system of the bike or a car. Battery shown in this video is not suitable for direct replacement of the Lead Acid battery. It will fail !

Bravo pour le moment je suis en

Good bms is protection bettery

slm aleykum Ercan kolay gelsin...satin aldim bende 4s aynisni yaptim ...pilleri tam 16.8 den 14v dusurdum discharge yapip ve bms taktim ....super calisiyor vespa motorsiklet 14,4 volt veriyor......ama sen dedin 5A max sarj yapicalak...internette bu bms 60A charge oluyor yaziyor...nedenini sorabilirmiyim ?? pillerim high discharge 10A ve 4 tane yan yana toplam 16 pil...4s4p.

How will this charge on DC from magnet coils ...as this BMS needs CV cp current

hello my dear, take me out of a big doubt, nobreak battery is used to replace the electric bike ones???can i put 4 nobreak battery in the electric bike what happens?? to run a 6 coil alternator with a 350w 36 controller at 48 using 4 UPS battery? My battery is 7 Ah

Essa BMS suporta o pico de corrente da partida ?

bardzo ciekwy pomysl-poprosze o schemat polaczen -pozdrawiam

How was the process of charging batteries in that kind of set up?

What kind of solder do you use???

👏👏👏

hello dear sir frist thanks for this education video my question is , can we using three of this kind battery parallel together without BMS extra between them ?

Will it be OK to make 18650 LiOn battery pack for Motocylcle of 125cc ?

Ercan hocam severek takip ediyoruz elinize saglık böyle bir akü yapıp 3s100a bms ile, yüksek bir motor da(800cc-1000cc) kullanmamız mümkün müdür ? başlangıc akımı 53-60Ah arası.. Hintliler cok yapmışlar ve videoları var ama ilkkez 100a bms kullanan birisni görüyorum.. 40-60a bms ler bunun için uygun değil yüksek başlangıç akımlarında devreyi durduruyorlar.. Şimdiden teşekkürler..

Una pregunta ,esa moto es de combustión (gasolina),creí que era una moto eléctrica .muchas gracias .

just a simple question......I wanna do a rap what should I focus the most on when I wanna edit or make a good soft?i would love to

its not charging tho ? to charge a 12v battery ( 12.3-12.5 to be exact ) you need MORE than that. at 12.6 it will keep it in its state ( running with NO additional load ), but to CHARGE it, it must be at least 13v. ideal is 14.0-14.7v. some OEM see peak at 15.0v but never stays there. so how do you charge it ???

Gud days,sir sent all material pls.thanks advance

that was perfect. But my question is, can the engine charger charge this battery? 2- And this module has 5 cells. Is there any problem with charging the batteries?

Maybe I missed it, but is the overheating protection in place ? this is foundamental.

ഇത് എത്ര mh ബാറ്ററി ആണ് എത്ര എണ്ണം വേണം എങ്ങനെയാണ് കണക്ഷൻ എന്ന് വിവരിച്ച് തരുകയായിരുന്നെങ്കിൽ ഉപകാരമായേനേ

O sistem de mutlaka şark kesici bir devre kullanman gerekiyor, lştyum iyon piller fazla şarjda patlar

Super Bomb.

Boss ano ung my diode or mga capasitor mkakabili kaba nyan plug n play ba

Helal olsun Şapka Çıkardım Fakat ICR pillerin (LAPTOP dan çıkma) max desarj akımı düşük olduğu için yüksek amper çektiği için uzun vadede sorun yaşanmasın ?

Is it safe for a long term used??

Holes could be left open for ventilation & heat dissipation

Merci pour l’explication

👏👏👏👏👏👏👏

There are many direct lead-acid battery replacements with Li-ion cells. The easiest way is to contact a Li-ion battery packer such as Lithium Batteries,Motorcycle Batteries,Solar Batteries,KOK Power Limited that specializes in automotive, motorcycle and eBike batteries as drop-in replacements

c est le BMS qui gere la tension de 14.4 v fourni par l alternateur ??

hot air danger

is it safe? have overcharge protection and short protection ? and i want to know my bike has a 12v 7a battery and my bike charging voltage come 14.9v .i have 25A (hx-3s-fl25a) bms . can i use like this battery pack without damage my rectifier

👍

Interesting video, but the music is annoying as hell!! Keep with the repair and get rid of the crap music. Thank you for the information.

Why don't you do voice details on what you're doing and how to do it

technically all very good, but how much did you spend? surely by buying the original battery you save.

Can you charge directly with solar?