How To Remove and Replace Valves in a Cylinder Head -EricTheCarGuy

Рет қаралды 1,395,371

10 жыл бұрын

If you need to remove a valve from a cylinder head either to replace the valve or replace the valve seals, this video will help you do that. You can also do this process while the cylinder head is still fastened to the engine block with some tools. To do that, put the piston at TDC compression stroke and make sure both valves are closed. You can then run compressed air into the cylinder to hold the valves in place as you compress the valve springs. I often use my compression tester hose to do this. You need to remove the schrader valve first before you attempt this, if not, air will not flow into the cylinder. You can also use a piece of rope or equivalent to keep the valves from dropping into the cylinder while you work. This method works well if you're just replacing the valve seals. You won't be able to use the large spring compressor however. You'll have to use the Lisle or some other type of compressor do manage that task. Here's some useful links for you.
Tools.
Large Spring Compressor: www.jbtoolsales.com/gearwrench...
Lisle Spring Compressor Tool: www.jbtoolsales.com/lisle-3605...
I had a heck of a time trying to find the Honda special tool and was not able to provide a link for you. Sorry about that. The Lisle tool will work just fine, OR I've seen some home made versions of that type of extension that looked like they'd work pretty well.
Related videos.
Basic Parts of an Engine: • Dissecting an Engine, ...
Civic Engine R&R Part 1: • 1998 Honda Civic Engin...
Tahoe Engine R&R Part 1: • 2007 Tahoe 5.3L Engine...
Dodge Ram Engine R&R Part 1: • 2002 Dodge Ram 1500 En...
Sonoma Engine R&R Part 1: • 2001 GMC Sonoma 2.2L E...
Articles.
How to Find Leaks: www.ericthecarguy.com/faq/find...
Discussion about this video: www.ericthecarguy.com/kunena/1...
The best place for answers to your automotive questions: www.ericthecarguy.com
EricTheCarGuy code lookup: www.ericthecarguy.com/obd-code...
Facebook: EricTheCarGu...
Twitter: / ericthecarguy
Google+: plus.google.com/1001951801966...
Information on Premium Membership: www.ericthecarguy.com/premium...
Stay Dirty
ETCG
Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.

Пікірлер: 661

@mattdloughy5369 7 жыл бұрын

just wanted to take a second to say thank you. youve taught me more than anyone has about what ive always wanted to learn. youre a father figure and school teacher i never had all in one lol. thank you for what you do.

@axtra92 7 жыл бұрын

Matthew Dloughy calm down

@erickcid7001 6 жыл бұрын

Both of you Quit yo bitching lmao 😂

@donhartfield1260 3 жыл бұрын

@@axtra92 binhello

@bigaaron Жыл бұрын

@@axtra92 lol

@jaydenrodger117 Жыл бұрын

He's a super hero of car guides

@AlexRH1991 5 жыл бұрын

I'm a young and learning mechanic and im doing my head Gaskets to my car. I needed to make sure I took out my Valve springs correctly and Eric is the guy that will teach you with great explanation. Iv learned a lot from him and the books.👍

@EchoGillette 3 жыл бұрын

You're very good at explaining basic and complex concepts in an understandable way

@DeadlyVoltsHD 7 жыл бұрын

Cannot stress enough how important a good valve Spring compressor is, the cheap ones will work but you may loose an eye in the process! Great video Eric !

@hamzomahamud1597 10 ай бұрын

1:06 😊😊😊😊 1:10 1:10 1:10 😊

@OhioLiving 10 жыл бұрын

Eric Been watching your channel for a while and I am happy to see you doing this. It's great to share the information that you have worked hard to learn. Great tool to do the seals with the head on. I would mention that it's always a good idea when doing this with the head on to place rags over the oil drains on the head. Nothing worse then chasing a keeper that you hope fell all the way to the pan! Good stuff man keep sharing!

@MrGoblin60 7 жыл бұрын

Great presentation Eric; very helpful. I liked that you keep the "blooper" in because it showed what can go wrong.

@lordjop9684 7 ай бұрын

Eric i hope you are doing well sir. In 2015 i did a valve job on my 2008 Honda Accord using that tool from Lisle. It worked awesome. Got my car on the road but shortly after i sold it to a buddy. Then i got a brand new 2015 Audi S3. Now it's 2023 and I'm rebuilding the engine of my Audi with 208,000 miles on it. Had to revisit this video to remind myself how to use the tool, lol. Have a great holiday and a healthy new year buddy ! All the best !

@movingforward4950 4 жыл бұрын

This is what I need to have done to my 1993 Honda Prelude I'm glad I found you on KZfaq You've explained quite a few things to me in detail that are very important to my Honda thanks bro SEAN

@JOutterbridge Жыл бұрын

Just wanted to say this is one of the best youtube videos I've ever seen. Great camera action AND description of each part AND what they do. Simply amazing, immediately subscribed for more tips and car info.

@monsterofice1686 Жыл бұрын

I can watch a hundred videos on a subject and learn a little, then watch one of yours and instantly retain all the information. thank you

@oleand14 4 жыл бұрын

Awesome, thank you! Doing this on my Bike soon, zx9r, never picked apart an engine before so your videos will be of Great help when i hate Reading service manuals... 🙄

@franciswillor9479 2 жыл бұрын

This guy is the first guy online I could find that states that the keepers are supposed to be , thicker in width side of the keepers , at the top to install properly! Thanks Eric

@AceEvolution917 10 жыл бұрын

Exallante detail! I had been looking for a tutorial on how to do this exact thing, and I like that you do a lot of honda videos cause it helps guide me in my self taught mechanic applications with my Acura Integra! Thanks EricTheCarGuy!

@ItsMaTOfficial 4 жыл бұрын

The transitions were the important part for me to better understand whats going on. Quality content and great explanation! Thank you!

@PhamVans 8 жыл бұрын

Loving this information era we live in, but to be quite frank, I find having the right tools at hand is the most difficult part in the DIY process. That and a hoist would also be convenient.

@bobleclair5665 5 жыл бұрын

Danial Pham ya, a hoist

@sfitz-rp4du 3 жыл бұрын

Eric, Thank you for this very informative video on how internal things work. I enjoy your tips and tutorials as a DIYer.

@blakeprocter5818 4 жыл бұрын

I know it's an old video, but cheers for this. This is going to be a fantastic reference point for me when I get around to replacing the stuck valve in my 1985 Toyota Cressida. Simple, informative and with a clear view of what's going on. Perfect.

@MrSupernova111 2 жыл бұрын

How did it go? Looks like the hardest part might be removing the engine block from the vehicle.

@ronsinson1989 10 жыл бұрын

Thanks Eric I have a 2001 Honda s2000 Ap1 and there notorious for valve retainers cracking and so im a replace them my self now that I've watched your video I feel more confident in doing. Thanks for all you're videos I watch em every time I need help.

@stevenhrelec689 10 жыл бұрын

Hey eric great vids, i recently did a head gasket, timing belt repair on my honda with the info from your videos. Your a big help to us home mechanics. Thanks!

@kevinhancock4064 2 жыл бұрын

Fair play I'm currentkyb4aking dealer to court .....mazda given me some horrid diag. Head gasket failing bad turbo and shitted up intake. Not impressed . I'm good with most things brakes servicing (currently got bike engine out removing head fir header bolt issues) but that's something I'm.learning in my own time . The car needs sorting in better time good on you buddy

@aarondickson9233 4 жыл бұрын

I’ve seen all types of different of valve tools and I really like this one it is the best and fastest tool I’ve seen so far, thank you for this video so much!!!

@elgatogordo9523 4 жыл бұрын

Bought a used Honda 2.2 non Vtec long block for $80. I was told it needed was an oil pump and new gaskets. Once I disassembled the head, found #2 exhaust valve burnt and missing a large piece. #2 piston oil ring was broken causing oil to seep to the combustion chamber and exhaust manifold. Replaced the valve and refreshed the cylinder head, installed new piston rings and cleaned all the oil sludge. 4,500 miles later the engine is running great with no issues and recently passed the emission test. Thanks Eric for your help and guidance performing this task...

@roldanramos5064 8 жыл бұрын

Thank you Sir, for the demo of the old tool and the new one. It is very helpful on newbies like my. God speed !

@MLFranklin 6 жыл бұрын

That Lisle tool is utterly amazing.

@Newbenwindowcleaningcom 5 жыл бұрын

Eric for president ! Great videos , slow talk , easy to understand , classic , great guy ... oh ok , lets call him Eric the great guy of automotive guru.... thanks eric ... your videos , will guide me to my first k series swap .. from non automotive guy

@rickskzrx4910 6 жыл бұрын

Thank you eric for this super helpful video! God bless! you are a good guy for taking your time making these videos for us! Thank you!

@petermorthen 7 жыл бұрын

What a great video. Many thanks. Simple to follow and really well explained.

@ryanschmid9300 10 жыл бұрын

I always learn something new with your videos, thanks Eric!

@johnkaplanian 10 жыл бұрын

Dear Eric, a more interesting alternative would be a valve spring clamp compressor used while the cylinder head on the engine (not removed) where the compressing process is so slow (screw in by T handle) and you can easily watch the valve small keepers falls to sides rather than flying away. This clamping device are primarily uses to change valve seals without taking off the cylinder head, but you need to place the piston on TDC on the valves you are working with in addition to applying compressed air through spark plug hole to keep the valves closed, but I did it without the compressed air, but with a special bend screw driver inserted through spark plug hole to keep holding up the valve during the compression of the spring. You may need a second hand if you do not use compressed air.

@cherryblossomscarletokami9841 4 жыл бұрын

even though i dont have a civic or an acura, your videos have helped me alot throughout time, thank you eric!

@anaeleraphael8725 6 жыл бұрын

Although there is always the possibility to improve on anything, but if this is how best you can teach, then keep it up. it is fast, straight to the points and I think rich in details. really love your style. Nigeria

@Inboundbogie 8 жыл бұрын

YOU !!! sir Eric never cease to amaze!! From us Aussies ! We salute you !

@kenball1980 6 жыл бұрын

Thanks! I tried 3 different types of spring compressors to no avail. The 36050 tool worked like a charm.

@benbulmash2022 10 жыл бұрын

Thank you so much for your advice and profession. You have helped and explained a lot to me. Keep up the good work

@movingforward4950 4 жыл бұрын

I'm doing valve stem seals on my h23a1 thanks to you Eric I definitely have the confidence to make this happen

@chambliziOfficialChannel 2 жыл бұрын

Ive been watching Eric since 09 went to college came back and there are still other things to learn

@TechTimeWithEric 10 жыл бұрын

I used something like that Lisle tool when I did valve seals in a 350 in a Chevy Van. I didn't want to pull the heads, so I used the air compressor tool to put air in the cylinder so the valves didn't fall in, and did it that way. That was a great way to do it.

@eyevincast5440 9 жыл бұрын

Wow you make it look so easy....but with the right tool you do the right job. Thanks love your vids very informative.

@robreyes5355 4 жыл бұрын

Eric i been following you for years im a big fan.. Thanks to your videos i saved some money doing it myself..thank you ✌✌✌👍👍

@everettclunie3525 8 жыл бұрын

That lisle tool is badass, not to mention reasonably priced! 54 bucks on Amazon? Nice! Glad I watched this 👍🏻

@boxserpent 10 жыл бұрын

Thanks Eric, your videos are always very helpful. Congrats...

@r0ckymountainhi 8 жыл бұрын

Thanks for that part number for the Lisle 36050, and a very informative helpful video ETCG.

@solesearched 10 жыл бұрын

Wow Iv never seen that type of valve compression tool before (the second one), whoever designed it is a genius!

@ismaelcoronajr 6 жыл бұрын

Dude i love your videos, They have helped me so much over the years, If we where in the same area i would go to you for work!

@gokermitsewerside358 5 жыл бұрын

wow i love you for this video i just had one cracked valve and a "mechanic" said i should just get a whole new engine i am a KZfaq mechanic until i go to UTI and i really appreciate the information you put out. i will be doing my engine rebuild myself instead of wasting money on a "mechanic" a true mechanic can repair as well as replace rather than just say"just get a new engine"

@SlicenDice03 5 жыл бұрын

once you get into the automotive industry you'll understand why a mechanic would say that. sometimes the labor hours are more wisely invested into getting a new motor instead of repairing an old one.

@SlicenDice03 4 жыл бұрын

@Joanne Agliata what are you referring to when you say "is this the right one"

@MoleskineFan 10 жыл бұрын

Awesome tutorial as always Eric :-) Thank you!

@nancysamsen3558 2 жыл бұрын

This is such a great video about valves and replacing them. My husband and I wanted to know what it consists off to replace a value. We have a 1999 Firebird and we have cylinder 1 that keeps triggering the service engine light . We replaced PCV valve, we replaced with a new fuel injector for number 1 and we put in valve cleaner, it worked for about a week with no service engine light, the service engine light is back on and the computer is still reading cylinder number 1. after changing all those things. The car has a rough idle and jumping when in idle and sucking up more gas, so we realize the issue is more involved than just the small things we did to help the problem. We realize the next option is for my husband to open up engine and replace valve # 1 and he said, no sense in opening engine which is a big job on a V8, engine 5.7 LITER and not replace all of the valves. If he opens that engine up he will replace all the valves cause down the road # 2 or #3 or 5 will act up. He is not looking forward to doing that ! ha-ha. He said this is about 4 days worth of work ! We are decided whether him to do that job or pay another mechanic to do this job but we realize it will cost a couple of thousand of dollars to do this job and we really didn't want to put that kind of money in a car 22 years old with 185,000 thousand miles on it but if we keep the car we will have to do it as if we keep driving it like this , we will cause more damage like ruining catalytic converter among other things. The good thing we got 22 years out of this car without never doing anything major to engine or transmission and 185 , 000 miles with just replacing regular wear and tear so i guess you could say we got out moneys worth. We thank you for this video as it explains in detail of how to replace a value and what to do and what not to do. Very helpful, Great Job !

@MrSupernova111 2 жыл бұрын

How did it go? Did it take four days after all?

@taylorsellers7018 7 жыл бұрын

thankyou so much this helped more than u know. you save me so much money and time its crazy not just this video. EricTheCarGuy needs his own tv show!!!

@stangalang11 4 жыл бұрын

This is extremely educational. Thank you 🙏

@WouterB76 10 жыл бұрын

And another learning moment! Thanks Eric!

@Soulception 9 жыл бұрын

Subscribed, im takeing an auto mechanics class so when i come home your pretty much my second teacher

@stupa55 10 жыл бұрын

Nice, was always wondering how to get out valves on the cylinder head :D Very informative :)

@ericcross8361 3 жыл бұрын

I learn SO MUCH from you! Thanks Eric!!!

@dannytharrington277 Жыл бұрын

Good teachers always find ways to teach a complex subject in an easy and straightforward way of understanding it...

@mrcaboosevg6089 4 жыл бұрын

I need to lap some valves, this is way easier than i thought it'd be. The right tool helps, when i've done it in the past it has been a struggle

@seanrose794 8 жыл бұрын

@EricTheCarGuy Your videos are awesome man. Thanks for all the knowledge!! You Rock!

@gvvq-pi5ml 10 жыл бұрын

Hi Eric I like it, I have used the old type compressors, haven't seen that other one you are using, I have used a hammer and socket to get them out...great stuff - Fred in England.

@OpaKnows 10 жыл бұрын

Yup, back when I was in high school in 1981 (yes, we had cars back then), the INSTRUCTOR taught us how to do this with a sledge and a socket. I was wondering why this method looked familiar...

@estlhm805 Жыл бұрын

Great video and information! Always took this to the machine shop. But now after this video, I can do this.

@sheashaus1 6 жыл бұрын

Great Video it’s giving me ideas of how to get it done with big sockets since I’m stuck at home.

@jesselyons2002 10 жыл бұрын

Yay pocket screwdriver is back. What about a tool review on that

@Caluma122 9 жыл бұрын

Thank you. This was really bugging me, f'ing and blinding. Your method, calm as the ocean. So thank you for showing me the way to a peaceful life :)

@buddyboy1953 4 жыл бұрын

Great video thank you for showing how to remove the valves great job !!!

@adamredden2007 10 ай бұрын

Dang man, if all of your videos are this straight forward, I think I've found a home 😄. Just bought a 78 F150 that has a 73 351W in it. Already have a sticky valve issue that I'm going to have to deal with. Thanks a lot!

@LMacNeill 10 жыл бұрын

Definitely will buy that Lisle 36050 tool if I ever again need to remove valves! That was SO much easier than the old-school way, which is the only way I've ever known. Thanks a bunch, Eric!

@ericthecarguy 10 жыл бұрын

They both work but the Lisle tool is super handy.

@decioandrade3586 10 жыл бұрын

Great info. I justo though of a magnet on the first tool, also to prevent parts from flying away. And will be lookin foward for removal, re installation of the lifts.

@MoleskineFan 10 жыл бұрын

Hello Eric, does it make sense to lap valves when seating them? I have seen some people say that it cannot be done correctly at home and that only a machinist will be able to properly do this... What is your opinion? Thanks!!

@RobertoSteveLou 4 жыл бұрын

Interesting! you´re awesome! I open my CRV valve cover and found the two keepers on the head floor, as well as two rocker arms out of their position, wonder why it can happen! cheers from Panamá!

@DarkHorseParatrooper 4 жыл бұрын

Dude you're freaking awesome. I'm tearing down everything in an 03 eclipse because the timing tensioner broke and so timing jumped and the valves broke. I was gonna have to spend like 800 bucks to have a engine guy rebuild it for me. This is gonna save me so much.

@chambliziOfficialChannel 2 жыл бұрын

How did it go

@gustavrodriguez910 2 жыл бұрын

@@chambliziOfficialChannel not him but my crv had a single burnt valve and wouldn’t pass inspection due to misfires. Shops were charging 1,000-1,500 to swap the engine instead of doing a head job. Doing it this weekend myself after gaining confidence.

@gustavrodriguez910 2 жыл бұрын

@@chambliziOfficialChannel like I’ll literally save close to 1,000 dollars. Fuck those scam ass crooks.

@Migs_M88 8 жыл бұрын

Hey Eric, if I saw this video exactly 24 hours ago I would have done my valve work myself on a Mitsubishi 4g18 sohc engine. Instead I removed the head and sent it to a mechanic and paid 500 dollars to have it done. Bummer. Thanks tho. Gonna buy that removal tool to add to my inventory ASAP lol

@mesothorium 10 жыл бұрын

Wish i had a teacher like you back when i was at school. Working as a technician now but my interests are in automotives.

@Speed00007 9 жыл бұрын

Eric for president!!!

@fireyourrocketts Ай бұрын

I do not have leaking seals but took my pentastar apart to repair hydro lock, the heads and block will go to machine shop for cleaning inspecting and decking so I need to take the valves and seals off it, I do have the Leslie tool; thanks for the wonderful video.

@gerardkavanagh144 2 жыл бұрын

Very well explained and demonstrated; as usual a top video. Many Thanks.

@carlrosenbaum3754 2 жыл бұрын

I am not a mechanic but love watching your videos great to learn. New subscriber from phoenix az peace

@roadworthy6901 7 жыл бұрын

I am entertained with your Fairmont build, however for the record I do miss the days when I could say "Eric, you're always working on Honda'a!" ...and I love it.

@jesusnegron2642 6 жыл бұрын

thank you for the great videos i enjoy very much,and learn a lot from you..GOD BLESS.

@edhorn958 6 жыл бұрын

excellent lesson for a beginner such as myself, thank you

@bubbs2010 5 жыл бұрын

Eric, awesome as always. GREAT VID

@anthonydelacruz1640 7 жыл бұрын

Thanks man great video!!!! Know I just need to learn how to take apart my 02 dodge 1500 to do a valve job

@502deth 10 жыл бұрын

the 2nd tool- ive always done that with a deep socket. the socket could never reinstall them, of course. i like it.

@datoyguy1 9 жыл бұрын

Awesome video bro!! Thanks for the helpful info!!

@handyertanto76 Жыл бұрын

Thank you sir, for providing this video. Greetings from Indonesia

@messagetous Жыл бұрын

Thanks Eric, now I need to see the valve seal on OHC while on the car.

@dennychristensen7418 2 жыл бұрын

Funny I ran into this video like two years ago and it gave me the idea of machining my own valve keeper remover with a magnet installed to catch the little guys and it works great. Same with the installation machined a tool looks a lot like the add on peace to your old school tool. Good stuff. But my question is I have two bent valves I believe keeping the valves stuck and stopping me from getting the timing correctly orientation done.. what would you do just pull the head start over you think.

@furlyghost 10 жыл бұрын

Hey Eric I've got to replace my valve seals, is there a tool you would recommend to use without removing the head? Something to depress the springs on maybe 10psi shop air?

@TheBlazerSociety 10 жыл бұрын

Thank you sir this very much helped me got the part number from the link! Thanks

@HummyHitVTEC 10 жыл бұрын

great vid Eric! you should do a lapping video and valve stem seal removal and install.

@AE-wi5fh 10 ай бұрын

Eric, you are the man. Love, Alex from Colorado ❤

@davidlqvist6679 10 жыл бұрын

Very professional, this video could be used at an automotive school.

@Masheeable 6 жыл бұрын

Grease on the keepers FTW!! Thanks heaps, doing this with an old clamp style spring compressor.

@gatekeeper88 7 жыл бұрын

awesome diagnostic vid, words aren't enough, but in saying.. valve seals, well to ME personally valve stem seals (where applicable) are my issue and perhaps an issue of many other viewers.

@hadideyal9377 6 жыл бұрын

it was so usful to see this video , good for you to show this video , i hope to see more from you in mechanics , thank you ....

@onthatdove 2 жыл бұрын

Your video gave my son and I great confidence to give it a try on a 3cyl diesel tractor engine. We succeeded! Now I just need to find TDC on the pistons so I can set all e lash and hear the engine crank for my very first time. Do you have a video on how to find TDC without timing marks?

@TheRextc 10 жыл бұрын

Thank you for the video! Looks like I will be buying this tool.

@Oxindole 10 жыл бұрын

Nice vid as always. Since doing a valve job would most likely be done after many miles, I'm curious if the springs lose spring force over time and would thus need replacing or are they good for the life of the engine?? Assuming that it's a daily driver car.

@liftedcj7on44s 10 жыл бұрын

Have been using this tool for a good 4 years.

@lapelapapi 7 жыл бұрын

Loved the tool. Thanks!

@livingwaters7841 4 жыл бұрын

This guy is incredible, thanks so much

@BigRedFishDad 5 жыл бұрын

Great video... 10pm at night and I just went out and used a piece of 3/4 pvc with a hard drive magnet inside and removed the suspected bad valve. This was a great video. Of course to reinstall I will probably need to visit autozone loan a tool but at least you got me to the valve out and it wasn't bent... at least obviously so now I have to figure out is I just want to clean everything up real good and reinstall. (the car was only $300 and has lasted 16 months.

@phillipmurray5516 7 жыл бұрын

love this video plan and simple removal of valves

@transam8607 5 жыл бұрын

I didn't know about these tools I love your videos and if the keepers flew out like they did on you in my garage it would be like finding a needle in a haystack lol