How To Re-Key or Repair a Lock (Honda High Security)

Рет қаралды 208,650

3 жыл бұрын

If you have a key that won’t turn in a lock, or you have to carry 2 keys because one of your locks was replaced in the past, this video can help you solve those issues.
In this video I show you how to re-key or repair a broken lock cylinder. Even though I’m showing this procedure using a Honda lock, this is the basic design most locks use, so this information can be used for more than just Hondas. Once you have the lock removed from your vehicle, this video can show you how to fix it.
Thanks for watching!
#ETCGVideo #locks #rekey
Become a Premium Member of EricTheCarGuy.com: www.ericthecarguy.com/why-bec...
My Patreon Account: / ericthecarguy
The best place for answers to your automotive questions: www.ericthecarguy.com
EricTheCarGuy FAQ Page: www.ericthecarguy.com/faq/
Check out my ETCG1 channel: kzfaq.info?su...
Tools
Honda Hight Security Pinning Kit: www.clksupplies.com/products/...
Related videos
I Just Bought 2 Honda Elements: • I Just Bought 2 Honda ...
Fixing Up My Brothers Rusty Element: • Fixing Up My Brothers ...
Honda Element Engine Replacement and Restoration (Part 1): • Honda Element Engine R...
Honda Element Engine Replacement and Restoration (Part 2): • Honda Element Engine R...
Honda K Series Fail, What Went Wrong?: • Honda K Series Fail, W...
What is VTEC and How it Works: • What is VTEC and How D...
iVTEC and How it Works: • iVTEC How it Works -Er...
Element Video Playlist: • I Just Bought 2 Honda ...
**Answers to your automotive questions found here: www.ericthecarguy.com/faq
Social Network Links
Facebook: EricTheCarGu...
Twitter: / ericthecarguy
Instagram: / ericthecarguy
Wanna see more stuff like this from ETCG? Information on Premium Membership: www.ericthecarguy.com/premium...
Stay Dirty
ETCG
Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy®.

Пікірлер: 392

@jimmyblair7597 Жыл бұрын

As a man with 3 sons and a brother with Honda's I have run into lock issues myself. I ordered the kit you linked and have an Accord to work on this weekend. Thank you for this video, I have watched numerous videos you have made, THANK YOU! Hope things are going well for you, I know that lots of things have changed for you. From Minnesota, thanks again.

@diablo24guitar 3 жыл бұрын

HI Eric! I've done this to a Honda Element, a Toyota Tundra, and a Lexus. I only wish that you had this video out years ago. I figured it out on my own, but having the ETC blessing always helps.

@outdoorinwithzach 3 жыл бұрын

As a former locksmith who's had to work on atleast fifty Honda locks, your not the first. All of their high security locks will have issues eventually. You don't have to replace the cylinder. You just have to replace the high security wafers or take out all but the last three. They wear out and then stick up causing you to not be able to turn the lock.

@ratagris21 3 жыл бұрын

Good info to know.

@bahjinelson3986 3 жыл бұрын

I have this issue with my 2003 Honda CRV. The driver side door will not unlock with the key, which means that I carry the fob with me. I'd like to get a key with a built in fob along with fixing the tumbler but the Honda dealer says that it's impossible to get such a key because they don't have one with a transponder, though I've seen these keys for sale and I don't believe the dealer. Any ideas?

@outdoorinwithzach 3 жыл бұрын

@@bahjinelson3986 oh sorry I never saw this comment. They are correct. For your year of car they did not. You'd have to go aftermarket which can cause lots of issue later. Find a local locksmith and see if you can get it fixed.

@bahjinelson3986 3 жыл бұрын

@@outdoorinwithzach Thank you. Maybe I'll just fix the tumblers and leave the fob at home.

@Scott-jw2dy 2 жыл бұрын

@@ratagris21 Is it possible to modify (leave out the pins?) a worn tumbler so that any Honda key would work in it? The odds of someone trying their keys in my beat up car are slim to none

@taserpulse 3 жыл бұрын

Really appreciate your patience. Not only do you work on these delicate stuff plus you explain the stuff as you go. Not to forget adjusting the camera angles in the middle of your progress. Thank you. Can't imagine me doing all this in the middle of my flow.

@scallywag1716 3 жыл бұрын

Patience is the key….

@blockbertus 3 жыл бұрын

And re-keying requires patience...

@RexenPrime 3 жыл бұрын

So if i sit and stare at it long enough it will unlock?

@scallywag1716 3 жыл бұрын

@@RexenPrime perhaps…only one way to find out.

@corydriver7634 3 жыл бұрын

Oh no you di-int.

@nasilemak868 3 жыл бұрын

That's the key to success

@sjn7220 3 жыл бұрын

Recently did this on my ford fusion ignition lock that was having some issues. I followed the guide that came with the kit and worked perfectly. Did it by measurement and not trial and error.

@hickorystx 3 жыл бұрын

Very detailed demo. Looks like practice is necessary. Great filming and audio tutorial!! Thanks Eric...

@danielm.2534 3 жыл бұрын

Been a Subscriber for years. Never made any comments until now and it has nothing to do with this Video. I have a ‘96 Acura RL that has sounded like an Airplane for several months. Thank goodness for ETCG! Took me 25 minutes from start to finish.🤘 Once I removed the 36mm Nut the Hub practically fell off into my hands. Glad my race didn’t separate like yours 😬

@sleeper98 3 жыл бұрын

Got a Kwikset rekeying kit awhile back and have saved myself tons of money with our rent house and the new house we moved into. A little time consuming, but nice to know that's 1 more thing I don't have to hire out. Same deal with cars too if you're going to do very many.

@yasmanibarajas7278 3 жыл бұрын

Best video I've seen today. I will try it on my car cause I hate having a door key and an ignition key. Awesome video!🤙🤙

@monkfry 2 жыл бұрын

Been working on my ‘96 for the past couple of weeks and I always end up at your channel. Almost capable of building an accord from the ground up now Hah!! Also been watching videos that I don’t need. 😆 I’ve never seen O-rings as hard as the ones under my rocker assembly. They were like glass. Had to pick/break them out in chunks.

@danyeldan2139 2 жыл бұрын

Great after watching your Video I bought after market key cylinder for 2011 Hyundai sonata limited because I didn't want to use two different key I removed the cylinder and start changing couple toots and I use my old housing now works perfect on my original key thankyou for you showing the important way to do it

@mrjsv4935 3 жыл бұрын

Very interesting, never seen before how the car lock cylinders actually work :) I once ordered a new key to one of my previous cars and the locksmith just needed to know the key code from the car's service book and he made working key very quickly. This car didn't have yet any immobilizers, so no programming required.

@citylockapolytechnikeyllcc7936 Жыл бұрын

Those were the days! I often exploit the bad practices of the auto industry. Cars no longer have the key code numbers put all over the place like they used to

@johnreid859 3 жыл бұрын

Good information. I just took a file to a trunk cylinder and made it work. Security wasn’t a concern, only that it opened. I didn’t have a Ford wafer kit.

@nugget5103 4 ай бұрын

I like your style, did it still need a key to open it, or could you open it with anything?

@nutzboltztoolz2734 3 жыл бұрын

Great demonstration 🤘 I was a Honda Tech back in the day and that was a common problem

@mybrainmeatshurt 3 жыл бұрын

Huh, I also went through this when replacing the handles on my Integra. While I had the handles out and had to take the locks out anyway, I decided to clean the 20+ years of dirt out of the locks, and while I had those apart, I made a note of which tumblers had which numbers and where they went. The replacement (used) handles came with lock cylinders, I took those apart too and had enough matching tumblers to make a whole spare lock.

@CorradoAlley 3 жыл бұрын

I've rekeyed VW locks and its relaxing zen like experience if not rushed. Good stuff thanks

@jonathanbanos2216 6 ай бұрын

This was extremely helpful. I learned something new I can do forever. Not to mention you saved me about $250 I didn’t have. You helped me so much !

@MM_in_Havasu 3 жыл бұрын

You have much more patience than I do! Excellent job just the same!

@greenhead333 3 жыл бұрын

I love your channel, so helpful with so many vehicle issues I have had. the majority of my car maintenance knowledge came from you so thanks for that!

@w.s.soapcompany94 3 жыл бұрын

Wow I actually do need this info. Thanks again Eric.

@EvilGeniusGaming84 3 жыл бұрын

That is some very useful information to have, I could've fixed a few locks this way 🤙

@Steel_the_Free Жыл бұрын

Excellent presentation format: narration, instructional vocabulary and sequence, clear, bright, sharp, close-up views. Also the suggested necessary precautions for example keep the ignition key in or avoiding “tiny spring flight” and anything else that… might cause the surgeon to go under his own knife… (figure of speech). Overall, a positive suggestion that it can be done. One confirmation, however: did I hear you say at 9:20 that the replacement pin selection from the kit is “trial and error”? Thus, given the increased handling due to guessing wrong, the existence of mirrored pin form-factors, possible tumbler re-orientation etc., I’m sure I for one don’t have the patience for a one-time only ignition lock re-pinning . Thanks for helping know when it’s time to remain in the audience.

@stevegmag Жыл бұрын

This was awesome. The pin kit worked great. I had trouble putting the return spring back on until I realized that the ends of the spring don’t push against the ears, they are captured by the ears… this part of the video wasn’t as detailed and I was doing it wrong… a vise grip was also helpful to keep the one side of the spring in place as you tighten the spring around to get the other ear captured. As always, Eric is the MFMan!

@LucidOne8 3 жыл бұрын

stay fun dude im going to mechanic school now been watching you for years

@trankt54155 3 жыл бұрын

Eric, good video.....to see the inner working of a Honda door lock cylinder. Thanks. I think I still have my old one sitting in a drawer...

@waynetanner1749 3 жыл бұрын

Very useful. Keys can be tricky to rekey yourself and yes, a locksmith can rekey in about 30 mins for a reasonable price which means much cheaper than the Dealer. Thanks 🙏

@ShadowcasterZero 2 жыл бұрын

if a locksmith can rekey a honda lock, they'll probably be able to cut a new key and program it too. Don't be afraid to ask a locksmith!

@mightyconker3903 Жыл бұрын

And even if they do it in 20 minutes you will pay a huge amount

@MrPaulrak Жыл бұрын

Thank you for posting this video. Un fortunately, I have a co-worker who thinks it's funny to prank with red loctite. It was either spend over $100 at Honda for a lock and key that would be different, or spend $100 for the kit for the repair, plus have plenty of spares for any future foolishness and all my other Hondas. For some reason I had trouble with the #4 half tumbler possibly due to key or tumbler barrel wear, so I left it out. It works great. Thanks so much for such a clear and understandable video. Keep up the good work.

@joesolari2395 3 жыл бұрын

Very informative. Great lesson. Now if I can only find a kit for my ‘94 Land Cruiser which we learned the hard way has a working ignition key that doesn’t match the door cylinders. Previous owner didn’t disclose or provide the door key and we were using the FOB for years until the car battery died and the realization was made. Really love the fact that you have so much info based around the Element. We bought our ‘04 new and just reach 286K miles, regrettably had a blow head gasket in January, but she’s purring again.

@ericthecarguy 3 жыл бұрын

Another option is to file all the pins down to make the tumbler smooth without putting in any new pars. So long as the tumbler is smooth when the key is inserted it will open the lock. It's less secure, but it works.

@pouncerminned863 Жыл бұрын

@@ericthecarguy this isn’t a good idea, it can cause lock to fail later

@AntonioClaudioMichael 3 жыл бұрын

Good video Eric on how to re Key a lock cylinder very informative 👍👏👌 seems very simple to do nice work @EricTheCarGuy

@timkirby5014 6 ай бұрын

Thanks for ur video...went to pullapart near me and got spare parts for my 07civic...first time I re pinned my tumbler...since the after market...key tumbler is made with cheaper material....it frustrating to fix it .however the video give good pointer tip to make it a dyi..😊

@panzerveps 3 жыл бұрын

Great timing! Someone tried to use a "universal key" (aka flat head screw driver) to break into my Jetta, and I'm thinking of going for a salvage yard lock. The remote works, but it would suck if the battery died. Also a good reason to stop by my old job for a chat (since they should have the re-keying set)

@panzerveps 3 жыл бұрын

@@aserta already checked with the dealership, and that would add a few hundred bucks to the bill. Not that there's any upgrades available...

@turkey1099 2 жыл бұрын

I worked from the front (closest to the key hole) to the back instead. You can use the key itself to hold the wafers in place and you can continuously check it in the cylinder to see if anything catches.

@citylockapolytechnikeyllcc7936 Жыл бұрын

You do a very good job explaining how this works. Most who make auto videos do a poor job on auto locks and keys. My experience as a locksmith... the only wafers I will use for Honda are OEM NEW. The aftermarket ASP ones I have, I shelved. I will not use them. My professional opinion is the quality is poor. The original kit can be bought through a Honda Dealer ( About 300.00 ). BONUS... The HONDA Kit comes with 10 door lock cylinder plugs and 6 trunk plugs... they work on MANY of the 2002-2005-ish vehicles. So if the lock is trashed a bit, you will be able to make it like new. The most critical aspect of this job, is replacing a damaged cylinder, and starting with a fresh key, cut by code on a very precise machine. I have an ignition that can not be saved... the center "drive shaft" was damaged by car owner wrenching on the key. I have never seen a damaged honda shaft before, and I have service over 2000 ignition and door locks since Honda introduced this design in +/-2002. Keeping all the locks keyed alike is helpful if the keys ever get lost, and it allows transplanting the chips from the old key into a fresh key that is made with provision for the chip. The correct lubricant for Honda/Acura is petroleum jelly ( Vasoline ) it is what comes in the factory kit, and what I find in half the vehicle makes and models.... the ones that do not use Petroleum jelly use Lithium paste grease. Just, ofr the love of GOD, do not use graphite or teflon or WD-Anything! IT will react with the factory lube, andgum up the lock. Your favorite locksmith can harvest the chip from the worn-out key, and put it in the new key, avoiding programming! If you replaced the ignition, the new one could be removed and rekeyed to match the original coding, it all depends how many locks there are around the car, which will be less work.

@loganmedia4401 4 ай бұрын

How does graphite react with vaseline to gum up a lock?

@mattfoley6082 2 жыл бұрын

I was able to get my driver door lock working by taking the cylinder apart and cleaning. There was just enough dirt and metal fragments inside to make the lock get stuck. I sprayed it with brake cleaner and used a cotton swab to clean the gunk from contact surfaces. I checked the key insertion and rotation several times and it works fine. Very happy I don't have to buy a new cylinder or tumblers. Now that I've said that let's see how long it works before I have problems again! It's a 2003 so I got 18 years out of it with no problems. Can't complain about that, I guess.

@tjdalyjr1 3 жыл бұрын

This is awesome! I needed this solution. Eric is the reason i bought an old honda haha and he provides the solution.

@krashpass Жыл бұрын

THANKS. Finally some one who shows how these new locks work. Great video.

@pouncerminned863 Жыл бұрын

What he said was not entirely precise but in the end he resolved the issue.

@billtanguay8905 3 жыл бұрын

Eric, thanks, I really like looking deep inside my 04CRV and 07Ele without having to actually take anything apart. I very regularly lube all my lock cylinders, so hopefully I will never have a non-working key. Fingers crossed!

@ericthecarguy 3 жыл бұрын

I like to use graphite when lubricating locks from the outside. Liquid lubricants can attract dirt that can build up and cause the lock not to move as well.

@jordancruz7665 2 жыл бұрын

Excellent info, I didn't want to spring for the kit, so the pins from the trunk/gas latch lock to rekey my door lock (the cylinders unfortunately aren't interchangeable). This video helped a ton. Thanks!

@ultraininja Жыл бұрын

That's what I was thinking to do Glad someone else confirmed it

@jamesholio Жыл бұрын

Yeah I was gonna steal the cylinder but now hear the cylinders are different. What a bunch of bunk. Good idea though with the pin exchange. Also thinking maybe the cylinder is the same left and right and just that bracket has to point the right direction.

@jordancruz7665 Жыл бұрын

@@jamesholio Mine doesn't have passenger-side or trunk locks, so I wasn't able to confirm, but I think you're right. My fix is still holding up after more than a year, and the replacement I bought allowed me to keep half of the pins in the donor lock, so the key surprisingly still works in that one as well. Best of luck with your repair.

@xxbvanxx 11 ай бұрын

Very informative video! Thank you so much for this! Learned a lot.

@CrazyFastFlying 3 жыл бұрын

Thanks for the video! I have the same issue on my Honda Civic.

@robertbirriel8619 3 жыл бұрын

Hey @EricTheCarGuy, I love your videos. I was wondering, where do you get your service manuals? I really wanna do my own maintenance and repairs, but I would feel more confident if I had a step by step guide on how to do it.

@isalmankhan1 3 жыл бұрын

Awesome video, Thanks for sharing Eric👍

@HouseCallAutoRepair 3 жыл бұрын

My dad and my GF's dad were both locksmiths... fun to watch. glovebox lock? Gas cap lock, locking trunk release lever (inside/floor)? and in some cases, spare tire access lock?

@Snufl 3 жыл бұрын

My car came with the amazing security feature of needing a different key for every lock, and none of the locksmiths around would touch them for less than $150 each. One of those $100 ASP kits ended up being the cheapest option to re-key 2 locks, but now I have an entire box of wafers that I'll probably never use.

@ericthecarguy 3 жыл бұрын

eBay?

@StarHunter28 3 жыл бұрын

That is an amazing security feature 😂

@ikeworkman4449 2 жыл бұрын

I was just thinking about how I don't want to buy the kit solely for my ignition lock. Lmk and I'd be happy to by some wafers off you. :)

@citylockapolytechnikeyllcc7936 Жыл бұрын

Locksmiths are not free. But those of us who are great at what we do, are worth the price.

@Sledfreak76 6 ай бұрын

I purchased a dual key CRV, my guess the ignition assembly was replaced, with no remote fobbed keys. I took the ignition cylinder apart, put the original fobbed key in cylinder and ground the protruding tumblers. Reassembled, the Ignition can now use the original key.

@AresWing314 3 жыл бұрын

EricTheCarGuy, I have found in my Acura Integra 1993, that the Shift Linkage/ Shift Mechanism, I had to Adjust, Clean, Lubricate to prevent my Key from remaining stuck in the Key Ignition. The Key never remained stuck since then. I don't know if this would apply in this case, but possibly a differential diagnosis to consider. Thanks again for your Videos!

@rickgaine3476 3 жыл бұрын

x another thing, when you buy the new ignition switch, just buy the cylinders for the other locks so that all the keys match. Saves you a lot of work in the long run. all you have to do then is just swap the cylinders to match.

@panzerveps 3 жыл бұрын

Except that they are $200 a piece for my car :P

@bobbyrios2k223 3 жыл бұрын

Huh. I wish i had this video when i had my integra. When those ahole thieves jacked up my ignition i had to get a new one, but never redid the doorlocks. I had an alarm anyways, but would be nice for the trunk and just keep everything in unison. Eric the car guy is also Eric the locksmith

@LukeDistefano 3 жыл бұрын

Amazing video I had my driver's door and ignition cylinder on my fit done about 2 years ago now my passenger door lock is on its way out and I'll do it myself now that this video exists! I also have a civic si, I'm wondering if I could re key the fits locks to match the civics key and reprogram the fits immobilizer to accept the civic key so I can have one key for both my cars?

@edpewalkee 3 жыл бұрын

The ignition in my 08 E took a shit and left me stranded a few months ago. The key wouldnt budge. Dealer wanted 600 to fix and locksmith wanted 400. I tackled it myself and after three hours of fighting that roll pin I got it apart. I left one wafer in the tumbler so the key doesnt fall out while I'm driving and it works great

@steves563 3 жыл бұрын

I went through this last year with an ignition lock that would not turn on a 98 Honda Accord. In my case it turned out to be a worn out key.. When I called a local locksmith he told me that it’s normally the key not the cylinder that wears out. So I went to my Honda dealer and they cut me new keys from my vin and they worked perfect even better than the worn out keys which I guess is not surprising. I too was prepared to replace the ignition lock cylinder and go through all the pains including updating the door key locks but didn’t have to. 👍🏻

@ericthecarguy 3 жыл бұрын

A very common issue. Glad you got it sorted. Thanks for the comment.

@mattfoley6082 2 жыл бұрын

My 2003 key was very worn down and stopped unlocking the driver door but it still worked everywhere else. Dealer wanted $250 for new key and programming. Found local locksmith who came to my house and cut new key and programmed it for $150. He said the old key is so worn out that continuing to use it will ruin the ignition lock. The old key is visibly worn down and thinner than the new key; I had no idea until I saw it next to the new key. I still have to replace my driver door lock.

@labradormcgraw 3 жыл бұрын

Just goes to show how little I know; I didn't even know this was possible. Very interesting. 👍😊

@ericthecarguy 3 жыл бұрын

Anything is possible with enough money and time it seems. Nice to see you.

@VacFink 3 жыл бұрын

A search for a video like this for my car a few years ago sent me down quite a rabbit hole. Videos from LockPicking Lawyer and Bosnian bill explain hos these work and how easily they can be defeated. I no longer presume the lock is secure but still worth the effort for 70 percent. But if someone wants it, its theirs.

@ericthecarguy 3 жыл бұрын

Honestly if someone wants to break into your vehicle they will likely break a window. It takes less time than picking a lock.

@eduardosanchez2381 2 жыл бұрын

Your video saved my day$$, thanks a lot buddy!!

@RexenPrime 3 жыл бұрын

This is absolutely perfect timing, i was just thinking of doing this to my beater car

@ericthecarguy 3 жыл бұрын

FYI, you can just file the pins down with the key inserted in the tumbler instead of replacing them. Less secure, but it works just fine.

@ScubaCat3 3 жыл бұрын

I don't need this for my car, but I HIGHLY recommend the schlage (or whatever brand you use) repin kit for your house. THAT is where you can really save money. I even got to "play locksmith" for my neighbor once with it. heh.

@seanbrenton55 3 жыл бұрын

If you cannot get your key to turn, there is a pin in the way, and sliding the barrel out will be finicky or impossible. This happened to my 05Honda ignition. I had to hammer the barrel out from the back side, destroying some pins in the process, and marring the assembly. Even if you remove pins to make it work, the immobilizer chip reader still provides some security.

@ameenm7576 3 жыл бұрын

Very informative video eric.

@flipperdoo22 3 жыл бұрын

Thanks for your videos! I’ve used them to fix up my cars and they run like a dream. I recently bought an ‘03 element but the original key doesn’t turn in the door locks maybe because the keys are worn. Can I just file the wafers down do I don’t have to go through the trouble of rekeying a new key and having the transponder programmed?

@martinblank4250 3 жыл бұрын

Thank you Eric - excellent video! If cars don't do it for you anymore in the future, how about surgery? Anyway, now I might have to get one of those nifty t-shirts you're wearing (just for that extra feeling of confidence when I'm doing maintenance...)!

@akamrcam 3 жыл бұрын

I remember talking to someone awhile back who had multiple cars without chipped keys from the same manufacturer and did this to on other vehicles so he only had to have one key for multiple vehicles.

@zachhendershot8565 3 жыл бұрын

If like to add that the "bumps" on the side of the wafers eventually wear down, and that causes the key not to work as well. This video doubles as a fix for that issue as well. My standard operating procedures for this is to match the ignition to the door key. That way, reprogramming the immobilizer isn't necessary, and the keycode still matches thr Vin.

@ericthecarguy 3 жыл бұрын

I believe I mentioned that this procedure can also be used to repair locks in the video. Had I tried to rekey the ignition to the old key, I would have had to have Honda set up the immobilizer system to recognize that key or the car would not start. The key cutting machines at Honda can easily identify the key code, even without the vin so that part is irrelevant. Thanks for the comment.

@gabelozano5891 3 жыл бұрын

@@ericthecarguy Eric.... I own a 99 accord replacing the rack and pinion any tips on how to remove the lines

@mygoodness8551 3 жыл бұрын

Great video, thanks Eric!

@kicknsystm 3 жыл бұрын

This is awesome! I have a 94 Del-sol I need to address this on.

@ericthecarguy 3 жыл бұрын

The same company that makes the kit for these locks also makes one for older Hondas as well. Link in the description.

@johnjkizer6399 Жыл бұрын

Thank u so much for this informative video, instead of replacing each tumbler, if that’s what it’s called, how about if I just sanded everyone that sticks up, that would work , right. And just maybe not every Honda key would open this lock, I know some might but not all, is that correct.

@JosQiNgMT 5 ай бұрын

Very pro!! Very detail in every single things

@vijayantgovender2045 3 жыл бұрын

Thank the videos are very helpful I am from South Africa

@kastooMcFry 3 жыл бұрын

Very cool explanation. Thanks!

@vinatechcoy Жыл бұрын

Thanks for your vivid instruction.

@jasonelizanigel9381 3 жыл бұрын

Very interesting video to watch this Friday. Almost reminded me of a Lockpickinglawyer video lol.

@allenjpl 3 жыл бұрын

What I have for you today is a broken Honda High Security Lock. With this wafer tool that Bosnian Bill and I made, I can open it in .. oh wait. I just opened it. To make sure it's not a fluke...

@happydog6537 3 жыл бұрын

Hi Eric love your videos. So glad to see you’re doing so well. This is for you and anyone out there that might know I know you appreciate these cars to so I thought maybe you could tell me. I have an 02 Acura RL that I love it’s my second one great cars I need to replace the upper control arms in the front will 01 version fit on an 02 because they’re broken up between 01 and 02 and the price is almost 3 times as much I know they change the ball joints in those years but will the 01 fit? If you see this or maybe anybody else reading it could help me. Thanks yours is the only video I’ve seen with any love for the RL I know you worked on them when they first came out I think they’re amazing cars. Have a great day thanks for the help.

@satin227 3 жыл бұрын

Nice LOTR reference, haven't heard that one in a while. Just need to scribe it in Black Speech on the key to ward of any wizards or would-be car thieves. XD

@mattfoley6082 2 жыл бұрын

Automatic window on driver door is disabled after doing this (i.e., after disconnecting cable to window buttons). When you finish the job you must reset the auto window feature. Steps: 1. Start car. 2. Lower driver window. 3. Raise driver window until close and hold button in UP position for 5 seconds. This enables auto window feature.

@literatesavant 3 жыл бұрын

Had this same problem on my 2003 Element. When I bought it used in 2010 the driver's door lock already didn't work. I had to open the passenger door and reach across to unlock the driver's. After awhile the ignition lock started to get sticky, and eventually it jammed on my wife and almost left her stranded 100 miles from home. Luckily a guy at a gas station helped her out, and basically forced the key in and got the car started. I ended up having to pay the dealer to re-key the ignition and door. Expensive.

@mehdiimran Жыл бұрын

Thanks . This part is covered . How about removing those key cylinder from the car to re key😁

@blackmanops3749 3 жыл бұрын

I have Saabs. They are notorious for filling with junk because of where they put it in the console. I just remove the wafers. Sometimes I just leave one so there is some friction to hold the key in. It's a whole lot cheaper and easier and just about as secure.

@jerryborjon Жыл бұрын

Thanks for the video! I didn’t buy the pin set, but your video gave me enough information to learn what to do! I just had a case of the key not being able to lock/unlock the door. Turns out that a single pin just got worn out and kept sliding past the key. Instead of replacing it, I just removed the pin entirely. It’s maybe a little less secure, but I doubt anyone is ever gonna want to break into a 15 year old car anyways. If they do, they’re probably just gonna break a window. Now my door locks and unlocks like a charm!

@neilhassanali316 Жыл бұрын

Similar, I removed 2 pins on an old RAV4 cylinder because I didn't think anyone would try to crawl through the back.

@orlandorivera9011 8 ай бұрын

Greetings Eric, your my hero !!!

@hollynunley4448 3 жыл бұрын

You are the best. Been watching for years.

@ericthecarguy 3 жыл бұрын

Thank you!

@ridgelineoverlanding 2 ай бұрын

My bad for starting the job without watching the whole video first. Didn’t realize you needed a new pin set. Now everything is apart on my desk. Off to a locksmith I go as i need this fixed sooner than later.

@frundlemud Жыл бұрын

Very interesting tutorial many thanks.

@christophertomes6777 3 жыл бұрын

Great video. I have a question tho. Is it a separate mechanism that keeps the key in the ignition when you turn it or is it the lock cylinder? I have a old 90s nissan 240sx and the key likes to fall out while driving

@erobles1011 Жыл бұрын

great video, thanks

@jiantan3470 Жыл бұрын

Super helpful, thanks a lot!

@dtoaain 3 жыл бұрын

Great video!

@TrieuNguyen-ve4ei Жыл бұрын

Saved my day. Thank you

@nathanrodriguez1089 14 күн бұрын

Do you need Erick set the same # of the wafers in order 1-5= from the switch key is to back or backwards

@user-to1nb7mp8r 11 ай бұрын

nice video! a quick question: if the car door lock cylinder got damaged, can I replace it with the glove box cylinder (or its wafers)? seems reasonable

@brandonlink6568 2 жыл бұрын

I lost my door key on my old Pontiac so I went to the junkyard and not thinking I grabbed a key out of a wreck to get my locks keyed to. It worked fine but the copy I had made of that key always required some jiggling to work.

@Chief1063 3 жыл бұрын

How does the glove box cylinder work such that the valet key doesn't open it? Great video as always.

@ericthecarguy 3 жыл бұрын

Remember the missing pin on the outer tumbler? I believe there IS a tumbler there in the trunk and glovebox locks so that the valet key only works in the ignition and the doors.

@lunstee 3 жыл бұрын

@@ericthecarguy The missing wafer isn't involved with valet keying (I don't know what it's used for). The difference is in the final wafer (the wide one that straddles both sides of the key). One shoulder is different between master and sub, and the wafer gets overlifted when a valet key is inserted. This means in theory, you can make a master key by cutting down a valet key. Looking broadside at the key with the blade away from you, the master cut is on the right side, closest to the tip, opposite the 'A' wafer cut. A valet key has no cut on the right opposite A. Of the four tumblers on the bottom row of your pinning kit, if I'm not mistaken, the two on the left (missing the right-side shoulder) are for cylinders where you want any key to work (e.g. ignition, driver's door), while the two wafers on the right (with a shoulder on the right, equivalent to the #5 tumbler) are for master key only (glove box, trunk). That shoulder blocks valet access. If you're testing your lock cylinder using a master key, you'll find one wafer from either side will fit. A valet key will work with only one out of the four wafers. Honda Service bulletins 01-077 and 03-068 cover key cutting, and door cylinder repair respectively. A lot of nitty-gritty details that are good to know can be found in them.

@CrazyPetez 3 жыл бұрын

I’m impressed! I had bought a used a 1981 Honda CBX (1047cc inline 6 cylinder air cooled motorcycle) that had the ignition switch/lock changed. It required 2 keys; 1 for ignition. 2nd for gas cap, saddle bag release from the bike, and the saddle bag locks. I was a parts guy (Hobby Job) at a Honda (motorcycle) dealer. I looked up the part number for the lock set and ordered it. Maybe $100 total. Perhaps with your knowledge, I could have set the ignition lock to work the bike keys? This was in about 1992. Things are much different now.

@ericthecarguy 3 жыл бұрын

Yes, I believe you could have. They do make a kit for the older style Honda locks as well. We used to send these off to a locksmith to do this work when I worked at the dealer.

@latinoguy483 3 жыл бұрын

Yeah just did this on my 05 civic wasnt that bad. Bought a bunch of them so when my pilot acts up i can replace those too.

@sylvainarseneault2501 2 жыл бұрын

Thanks alot eric , do you can give me your video for take off this keylock on the car before , thank you very much 👍

@lunstee 3 жыл бұрын

The 'little lock pieces' are called wafers For getting the wafers, the easiest way I've found is to buy a set of assemble-it-yourself cylinders off of eBay (search for Honda recode cylinder). The cylinders I've gotten this way aren't very good quality, but the wafers are very good. I chuck the cylinder and have used the wafers for repairing original cylinders. I've also gotten loose wafers from a locksmith before, but that only works well if you already know what wafers you need, otherwise the work of determining what wafers you need is something the locksmith would want to bill for. This is fine if you're just repairing a worn lock and can read the numbers stamped in the old wafers. Some locksmiths refuse to provide small parts, so YMMV.

@christopherroncone6939 Жыл бұрын

This video is awesome 👌

@Michael5029 4 ай бұрын

I used this video to rekey my own door lock for a CRV. I'm about to install the lock myself, hopefully it goes well. Mechanics quoted me $120 to rekey and install the lock I provided. A locksmith quoted the same just to rekey the cylinder. I say fuck all them and do it myself. The door lock mechanism was $21 on amazon, I got the pins for essentially $13 by getting a Civic's door rekey kit and just using those pins. The Civic key kits will include 5 of each half pins (30 pins), a bunch of springs, and 2 of each of the full pins (4 full pins total), which is more than enough for you guys to redo all the pins with some leftover. This saves you money on buying a whole pin kit for $80 when you just want to do one or two cylinders.