Good to Ernie working…a little smoke is okay.

How I love Mike's no ad policy

We had a 1155 & 1130 & 1105 these tractors where bullet proof loved to farm with these tractors

I spent so many hours in an 1105. No ac and only two radio stations and a seat like a rock. Brings me back.

Ernie engine runs smooth! You were complaining about the cab noise Fendt 1167. You should record 12 hour engine sound of Ernie and play on the Bluetooth when your drive the Fendt 1167.

That Massey is a thing of beauty.👌

Ernie he's very clean

Lovely old Massey there,,,, you guys want to watch that pto shafts cover spinning like that it's on the dangerous side of things you don't want any accidents,, stay safe guys 👍👍

Love the south farm content 😁

Really love the look and stance of that 1135, brings back some childhood memories of growing up on the farm. Not bashing any make or models of tractors, but in my book, back in the day, Massey Fergusson produced the best all around tractors.

I grew up on Massey's. The old Perkins 354 looks very familiar. Thanks.

Mike's inner 5-year old comes out when he's in the bin.

It’s probably a good thing for that 1135 to sit a run a pretty good load, run at operating temperature and burn any buildup out of it. That’s a pretty sharp 1135. Pretty impressive that the auger takes over 100 PTO Horsepower. Thanks for the Videos, Mike. You guys have a safe harvest.

You really have nice equipment, old or new it’s just a joy to see! 👍

Spent several hours in a 1135. Great tractor. Had over 9500 hours on it when I sold it. The engine was great.

Great video Mike. I'm waiting for next video mike ♥♥♥♥♥♥

they should weld a little platform for that rodono so its easier and faster to move it, it looks like you need to be kinda tall to reach the levers

Mike's got a cleaner cab on ole ernie than our coop has on their brand new gen7 Fendts. 😂

Farmer renting our farm back in the day had 1155 Masseys but run them so hard were always broke down

Great video Mike

Something about old tractors and equipment having levers and switches vs new stuff with just tiny buttons and touch screens

Yeah Ernie!! Was just thinking about Ernie recently. Great tractor Mike!!

I can’t believe the condition of that 1135. The gap in the window seals is classic. We had the Ernie but I am a big fan of the Bert’s. The 55 and 60 models are still my favorite.

Good to see the old boy hooked up and working

Some of the PTO wobble is probably caused by the ends of the shafts not being parallel, could be eliminated with CV joints or a double U joint (wide angle) driveshaft

Good luck combining your 2023 crops Mike at the south farm

Good job Ernie

Wow that is some auger. It would appear to be that the fact you can’t move the rodono without clearing the auger out and shutting I down is a bit of a design flaw

Has the either massey or the berths ever thrown a code?

As productivity picks up around the farm it is surprising how many augurs need to be available to do different tasks all at the same time thus a collection of augers are needed as well as extra tractors to run said augers

Hey Mike that telescopic auger had to be pushed out all way or else you twist of shaft potentially

The old Perkins. Smoking away.

Thanks!

Hey Mike, what do you think of the new Case Steiger 715s? I hope you can tour and demo one soon.

What a great Title !! You should write Children's Books 🤗🥰😂

So glad the 1135 is working well for you! Does the 1105 have 3 point?

Takes awhile to polish the new fighting also that will make a lot of difference on power requirements.

Magnifique tracteur et le ranpliseur est bien équipés pour remplir les cilo de céréales 😊😮😂

Some little birdy told me that Ernie belongs to chapple and his next machine is a truck called Bert what street do you live on sesame street lol

I love the old tractor content. Even old tractors have the right to work. Any chance you can buy a Big Bud for the drill? Tune that baby up to 700hp+.

Keep an eye

Yea Mike, Krep an eye on the old guys.

Luckily that auger hopper tire ran over your short foot. :-] By the way you might want to put a little more distance between those rear duals on Ernie 2.0.

You Just Said DO NOT get the Feet run over! 🎉 8:50

You HAVE to wear the hat to operate it properly. That’s like page 1 in the manual

Ii would move them control on the auger lower to reach them

naruto run in a grain bin 🤣🤣

When you guys put the Rodono on did you switch it from the right side of the auger over to the left? Have you considered getting auger steer to help maneuvering and lining up?

With all them cylinders stroking, you hope you don’t run the trans hydraulic system low or overfill on the smaller older tractors.

Is that a mustard thing to have that many pods in your sample?

Turn the a/c of Mike she will run cooler😊

My dad would yell at me if the tractor was left running with the multi power in low range. I don't know if it needs to be in hi 🤷‍♂️ lol

We need to see Bert 👀

I hear Perkins has a V8 you could slide in there this winter ! More Power

Surprise u guys don't have drive over hoppers on augers like welker got seems like that be faster and safer

We have a MF 1100 no cab it was a work horse for our farm for many years I use to pull a disc with it but mostly it sat on the blower blowing either hay or corn up into the silos running wide open all day now it just sits in the back of the shed we also have 2 smaller ones to now the cows are gone and everything sits what a shame

👋😊

Put in Murphy SwitchGauge safeties 6:35

Call the Guldens buyers...😊 4:47

Is Lee back full time or just when yoy need help? Thought he was with Claas?

Hi Mike i have 2 questions. Is Lee back for harvest or full time? Do you consider not farming fields every second year like the Welkers have started doing? Cemefallow?? Not sure haw to spell it. Greetings from Denmark

If that tractor was mine, I would mark the temp gauge range(where it was running) and instruct any other operator to shut it down, and look for a problem, if it ever went higher than that mark. My experience tells me overheating causes more dollar damage that lack of lubrication. Unless the dipstick operator forgot to check the dip stick!

Morning

Put some foam or T-shirt jersey over the microphone. Block the Wind. 1:30

What size auger is that Mike?

Since you got power at the bins, why not electric augers? 🤔

How in the world do those Rodono's not have a remote.

Bigger hydraulic pump? 9:29 Swap it out.

Hi mike Iove from India If I want to work with u wht should i do

if a massey-perkins aint smokin it s quit

Mustard shower

your 30 degrees and my 30 degrees are two different temps my 30 is below freezing your 30 is like my 80 hot if you don't get it I'm in the us

Mike, might want get something less technoligically challenging that the massy..😅

Why aren’t you using you green Fent tractor

I haven’t watched in awhile so what happened to Ernie 1.0???

Ffs get a bloody chain on that pto shaft cover. So much for all your safety.

Why not a port a pit if this works OK but a port a pit would be faster

Those old masseys always smoked

4:34 I am the only one who hit space bar on the keyboard at this moment?

Are you a Christian