ESAB Rogue 200i Pro - Stick/TIG Demo - What we honestly think about it!

No video

ESAB Rogue 200i Pro - Stick/TIG Demo - What we honestly think about it!

Рет қаралды 73,529

Baker's Gas

Күн бұрын

Пікірлер: 77

@Flakzacket 5 ай бұрын

I bought one of these for structural welding where I can’t get my generator welder in. I can run 3/32 7018 rod all day on 110 volt without hitting the duty cycle. If you try to to run 1/8 inch 7018 on 110 volt it’ll trip on one rod. On 220 volt it’ll run all day rod to rod 1/8 inch 7018. Thing runs super smooth too.

@darrellolsen1204 2 жыл бұрын

Excellent video, it's really helped me, I'm going to set mine up soon 😁👌

@malayangmechanic1269 2 жыл бұрын

how it excellent its not show the display while operating?

@drdr9452 2 жыл бұрын

So why is it I can buy this exact welder from outside the United States and have it shipped here to my house for half the price and this includes all the shipping duties and tax?!?!???

@summerforever6736 8 ай бұрын

Where can I order it pleaae!??

@G5Hohn 7 ай бұрын

I’d like to know. Ebay units from ireland?

@MrMonkforfunk 19 күн бұрын

Can you run a different torch on that machine? I hate the button because it forces you to hold the torch in a certain way. It would be better to use scratch start.

@lasaraungbakri7386 3 жыл бұрын

What’s the difference between the rogue ET and ES series please? I just bought Rogue ES 200i pro and it’s made in China, and it comes with no TIG torch. I am a bit dissatisfied with the purchase, seeing how complete and versatile the ET series are. The one I bought looks just like ES 130i pro functionality. I should have watched your KZfaq channel before making the purchase. I feel duped by ESAB distributor in Indonesia! I thought ESAB products are universal meaning all series are the same specs anywhere in the world.

@ShipyardWelder 3 жыл бұрын

Thats a later model. The ET has the newest technology in the rogue series welders.

@fabricehaesendonck196 3 жыл бұрын

nice demo bro thanks

@agguilarmetalwork4494 3 жыл бұрын

The machine sounds like my grandma’s blender 😄👍🏻

@MAC_6.7 3 жыл бұрын

That was quick!

@kierancourt7269 7 ай бұрын

I have just purchased the rouge ET180i and was wondering if it would perform similarly? most importantly will it be capable of welding thin stainless?

@JuanDavid-ts8ur 3 ай бұрын

Cool foldable table, I noticed it also has wheels! mind sharing where did you purchase this table? thx

@Garrettmoyer18 10 ай бұрын

So on 110v 90-100 amps can I run 7018 and 6010 and just weld few few hours without hitting duty cycle ? Or would that be a problem if a bigger job came about .

@gonzocutz 3 жыл бұрын

Isn’t that adaptor in the middle of the machine for the separate hose dinse type connection?

@everythingsucks6086 3 жыл бұрын

I need this!

@simenbkkenfjell_fanten8469 3 жыл бұрын

Does it have downsloop function?

@mikeevans6589 6 ай бұрын

Is this machine much older than the miller 160???

@danyvuong4145 Жыл бұрын

What's the part number for the little adapter for the 2nd torch please ?

@thisdj83 2 жыл бұрын

I'm looking for this tig torch setup but can't find it online. Ideal would be 17F with 25'-30' foot hose and remote. Please provide a link. I feel disappointed that the Esab Rebel 205 didn't come with this option.

@sukhjinderbab5562 8 ай бұрын

It's Esab rouge es200ipro? Its (es) or (et)?

@RDxxxxxxxxxxxxxxxxxxxxxxxxx 2 жыл бұрын

I'm planning to buy this, but retail prices here (Belgium) are much lower, ET200IP PRO CE is about €825 at my local shop, how comes the prices are off so much?

@BakersGas 2 жыл бұрын

Hello, I am not sure if you need a quote from us all international quotes go through support@bakersgas.com

@danielivan7868 Жыл бұрын

Where in Belgium i Find this Machine ? U have name about this shop?

@arnoutdm Жыл бұрын

I also was looking and bought mine yesterday, but the set is 1599! So i bought atm only the stick part for 535.

@marcmonnerat4850 7 ай бұрын

The Rogue ES is in the 700€ range, the Rogue ET in the 1500€

@kashjes6145 8 ай бұрын

Can you wel alloy stick with it

@smallgarageworkshop6119 Жыл бұрын

Hi I purchased the ET200I PRO however when I adjust the amps it maxes out on the display at 180amp and not 200 . Am I missing a hidden setting or something Cheers

@tomaslanchadelgado7455 Жыл бұрын

Cuando la pones para soldar electrodo? O para tig también te lo digo pk me pasó iguAl con mi alta frecuencia ac DC de otra casa telwing la compré como 200A también te digo k xo la compré para soldar aleaciones y materiales es decir para soldar especialmente con tig no kiere decir k alguna vez la haya usado con electrodo son las menos lo k kiero decir k con tig me da los 200A pero al cambiar a smaw osea electrodo su Amperaje máximo es 160 creo k pasa en todos estos grupos es más te aseguro k con esa intensidad pocas o muy pocas veces la vas a utilizar tienes corriente de sobra para electrodo y Tig no te preocupes pknno te de los 200A en electrodo pk no usarás más de los k trae es una makina para lo k es Ería estúpido comprrtela para batalleo de electrodo pk si kieres un ekipo para electrodo con potencia por mucho menos las hay y kbsueldan tig claro si lo kieres xa con estas cualidades adaptaba compra para lo k la vas a usar

@Zimmsters Жыл бұрын

He is using a different model, than it says in the title, a more capable device. ET200iP PRO is double the price of the ET 200i PRO

@smallgarageworkshop6119 Жыл бұрын

@@Zimmsters no he,s not and was sorted . They just programmed it while I waited . I have around 30 of these welders plus all Esabs so I kinda know all the models really well. 👍

@RonJaySmith 2 жыл бұрын

Can it stick weld 1mm box tube?

@enrique1765 3 жыл бұрын

Was the the smaw running on 110v?

@seadporovic6357 2 жыл бұрын

I would like you to test it with 4mm or 15 sticks 3.2 in row

@veluchamyvelu1479 2 жыл бұрын

Gas flow how access off torch flow stop tungsten is back please tell how access

@wurlabyscott 3 жыл бұрын

Amazing little machine.

@sukhjinderbab5562 8 ай бұрын

May i know the model name

@burkefbill 2 жыл бұрын

Couldn't see the display, important for me to see it in bright sun light.

@tomthompson7400 Жыл бұрын

they are good in real life ,,, well as good as anything can be.

@thomasbaumann8620 3 жыл бұрын

Is this Tig-Torch from Esab and what is the exact name of the tig-torch and the article number of esab?

@thisdj83 2 жыл бұрын

I'm looking for the same setup torch. Did you ever get any information? Please provide a link.

@thomasbaumann8620 2 жыл бұрын

@@thisdj83 Hello, sorry for my late reply. Unfortunately no, not even from Bakers Gas. I have now ordered the SRB 26FX-R with 4m hose specially developed for the Rogue (Esab item no.: 0700025580). Be careful, only torches that were developed for the Rogue Series fit! The ergonomics don't really convince me, I would prefer the torch from the video. If you found something, please let me know. By the way, the ES200i PRO is amazing!

@user-to7pk7lw4d 2 жыл бұрын

@@thomasbaumann8620 س

@danirahman4776 3 жыл бұрын

Wow amazing I like this 🤤

@konoctiswigwam8130 3 жыл бұрын

$1849 and no foot pedal ??? I really don't see the value over the 180i, you pay 3x the cost for HF and pulse, but no AC.

@BakersGas 3 жыл бұрын

You do get the flex head TIG torch with the 200i where the 180 you do have to buy the TIG torch. You are getting 20 more amps of power. I hear you though the value is more in the 180.

@dannyahern8341 3 жыл бұрын

These retail at approx 786 euro in Europe, about 960 dollars. I'm guessing it's because they are imported they are double the price in the States?

@dobrosilnee 2 жыл бұрын

@@dannyahern8341, in Russia it costs equivalent 500 $

@vovatabaev3357 2 жыл бұрын

В России он идёт с другой горелкой.

@vovatabaev3357 2 жыл бұрын

У нас в России другая комплектация

@user-pq3mz4xq1c 6 ай бұрын

Price

@pedjaostoin 2 жыл бұрын

Does Rogue know MMA pulse?

@HyliAir Жыл бұрын

The pulse settings are too limited for thin materials as you can’t adjust the background current and on time. Shame because it’s a well built machine.

@LukasZ92. Жыл бұрын

I would say for that money you cannot await more from... Most others (professional machines) even does not have hf wig at that level. I would say the esab is a really good deal, if you want to have an expert wig machine you have to choose another model or an ewm picotig 200

@tylerd55555 11 ай бұрын

is this true you cant adjust the low current of the pulse?

@HyliAir 11 ай бұрын

@@tylerd55555 I own the machine and the low current or background current is fixed, possibly as a percentage of the peak current. Other negative is the fan runs continuously

@MountainPF 8 ай бұрын

You can adjust the background current from 10-100 precent on the ET 200iP Pro

@virtual.complex 2 жыл бұрын

Hello friend, my name is Rosemar I am from Brazil. I really liked your video, congratulations!!! I would like Information about ADAPTER that you show at 05:45 minutes of your video. Please inform me the specifications of the dimensions and the type of thread of the adapter and, if possible, send me a link so that I can purchase the product. Thank you immensely for your attention. Thank you very much.

@BakersGas 2 жыл бұрын

Hello, for all international quotes you will need to reach out to our support team and they can help. Support@bakersgas.com

@rosianenascimentodasilva5004 3 жыл бұрын

Da pra usar a tocha seca

@serdiefgotreb 3 жыл бұрын

I have the same torch with the Esab Rebel 180 and I was wondering why the power button on the torch seemed useless. Now I know I overpaid for something I can't use U.U. I should have bought a CK worldwide kit which actually includes the gas valve grrrr....

@thomasbaumann8620 2 жыл бұрын

Do you have the same TIG-Torch? Where do you buy it? Do you have the Item-Number from Esab? Sadly i can‘t find any information about this Torch. Thanks!

@NoNo-uy2bq Жыл бұрын

@@thomasbaumann8620 have you found it?

@thomasbaumann8620 Жыл бұрын

@@NoNo-uy2bq Sadly, not yet.

@NoNo-uy2bq Жыл бұрын

@@thomasbaumann8620 TIG torch SR-B 26 type 4 m. Try copy and pasting that

@nareshsurana7692 2 жыл бұрын

Can I weld brass pipe 1mm to 3 mm mm thick with this machine

@sportsmanoftheozarks1575 2 жыл бұрын

If it won't do aluminum it won't do brass

@user-xj9tc9gc2c 3 жыл бұрын

Только что субтитры были на русскости а теперь только на английском (((и ни где не поменять вообще

@majorbrighton 6 ай бұрын

Your using terms that new welders that want to buy this cheaper machine won´t understand. Also talking a little too fast or excitedly, so are skipping on descriptions. Would have listened if it had been aimed at first comers to welding, yet maybe it´s not as simple process as I thought? I have seem people stick in a rod and up the voltage to cope with a thicker metal and the gas is included in the rod? I don´t want rocket science, just simple solutions to home fixes or spot welding. You did do some welding at the end, yet again, could not hear what you were saying, due to you being turned talking to the machine, could not see the info on the unit and was not shown the welded results? The camera sways forward and back again, I have no way of knowing why or what you were doing.