ESi Controls RTP4/RF 5/2 Day Operation Mode

Рет қаралды 31,061

ESi Controls

5 жыл бұрын

How to program the RTP4 & RTP4RF 5 / 2 day Operation Mode

Пікірлер: 17

@valeriecashmore3143 4 жыл бұрын

Great video easy simple instructions even for me to understand couldn’t understand the instructions in the box. Thank you😀

@baileysmyman 5 ай бұрын

Clear & concise. Thanks

@hopeh6176 4 жыл бұрын

Excellent video..very helpful....

@bobmarley6161 Жыл бұрын

Wow... Seriously.. Big thanks for that mate... You made it so easy.... The manual was like gobbledegook....

@bobmarley6161 Жыл бұрын

Quick question if I have this set in Auto mode but then manually turn it on earlier than the program times... Will it go back to auto mode when it reaches the first program time.... I hope that makes sense....

@dougieferguson6983 Жыл бұрын

mine seems to be set for 4 events (P1-P4), Does anyone know how to change it to 6 events?

@bobmarley6161 Жыл бұрын

There's a video on KZfaq where he shows you hot to do this... If you can't find it I'll send you the link....

@MRB-19 8 ай бұрын

🤔 This isn't really clear as to when the on/off toggle temperature triggers, going around the 24-hour daily cycle. Is the initial assumed status that the heating is on or that it is off: Does the first "event" time - P1 - turn the heating on if (& while) the temperature is below the associated indicated temperature? Or at first "event" time - P1 - turn the heating off if (& while) the temperature is above the indicated value? ... until the next "event" time, when heating status is reversed according to the temperature value...?

@middleground5084 8 ай бұрын

Totally agree, why have a P2/P4 off/finish time if it does not mean it will not stop? But continue when temp on P2/P4 entry on program is set say 20 deg. What I did with a friends thermostat program was set the temperature on both P2/P4 to about 5 or 6 deg this stopped the heating coming on when not required, while at work or asleep 🤔

@DRBella93 Жыл бұрын

this is such a dumb thermostat this means the heating only comes on twice a day realistically. cause if I don't set P2 and P4 to turn off the heating will just keep turning on and off through out the day ? ... like I can't set it to come on for 2 hours our at 6am.. then for an hour at 1 pm and then for an hour at 8pm. If I use this program setting this thing will just be on and off all day unless I only set 2 times P1 and P3

@3agram 4 жыл бұрын

Poor video, does not explain how to deactivate the heating, only shows when it will come on not when it will go off.

@iansharp0306 4 жыл бұрын

P1 is when the heating comes on, P2 is when it goes off. P3--on P4--off etc

@BuriramBaz 3 жыл бұрын

@@iansharp0306 ..really? I thought he said when it reaches the temperature you set..(p1 19° for example)..thats when it turns off..ive just had one fitted..and im here watching and trying to learn😱 😂

@iansharp0306 3 жыл бұрын

Sorry if I've confused you. Yes P1 is when your heating comes on, as long as your room is not warmer than the temp you set.for example if your room is 12 degrees and you want it to get to 17degrees then set P1 to 19 degrees. The set P2 to 11 degrees and your heating will turn off.same for P3 and P4. If you want to manually override, I.e your house is warm enough and don't to wait for P2 to turn it off, just use + and - buttons accordingly. Hope this helps.

@BuriramBaz 3 жыл бұрын

@@iansharp0306 ..Thanks,i think ive got it..boiler so quiet after the old tank engine i had before.Magic 🔥👍