I followed your tip about turning off as mine was not pairing, it still didn't work so I change batteries and it worked straight away, thanks x

You've saved me money. I thought my boiler was broken and all along the ESi thing had become unpaired. I followed your instructions and hey presto, I have heat again woohoo. A million thanks.

Brilliant video. Always makes it easy when you can actually see how it's done 👍

Thank you so much I wasn't holding the buttons down long enough I've been at it for 3 hours looked at other videos they did not explain this at all. Even the instructions The device came with don't make this clear. Thank you again Brilliant

Clear, concise. Saved me calling someone in. You are perfect at what you do!

Freakin awesome! Thanks so much, my installers couldn't pair it and got different gas engineers to have a look too and they failed. This worked!! Thanks again

My heating wasn't working using the thermostat, this was so helpful - thank you

Excellent video...not a clue about these things but this sorted me out.

Thanks for sharing the video, was very helpful.👍

This happens to us several times a year so thank you

Thanks for this, very handy and straight forward explainaction.

This worked perfectly . Thanks so much

God thankyou simple straight forward vid 👍🏻👍🏻

Thanks for video. My batteries needed changing.

Fantastic, have gone months without it connecting

Just my annual thank you for this! 🙏🏽

Thank you so much. Very helpful

Many thanks. It helps me to fixed the issue

Thank you so much 🙏 so helpful x

What if the lights do not turn off ?

Brilliant and useful. Thank you so much

Thanks very helpful, had the no signal issue..

Just wanted to leave a quick update since my recent comments. For those who mentioned their green light stayed on continously therefore when trying the steps in this video wasn't working. I managed to figure a way of solving this and should've thought about doing this sooner. Just turn off the boiler completely from the mains electrical socket. Switch the boiler back on after 15 seconds. You will notice both green and red lights on the receiver turn off. Then position the slider on the thermostat to off and follow the steps in this video. The receiver and thermostat should now sync. Hope this helps.

Thank you for this super video

Very helpful 👍👍

You are the star❤

Exactly what I was looking for today, thank you so much!

Life saver, thanks!

Life saver 🙌

Brilliant thank you

Thanks for this. My controller became unpaired after I failed to replace the low batteries in it and they eventually died. This sorted it out in seconds. 👍 Note to self: next time just change the batteries.

thanks for this as I forgot how to re-pair ours and can't seem anywhere in booklet on how to pair cheers

Thanks for the video. I have got currently (Drayton RF710 Digistat +1 RF Wireless Room Thermostat) looking to replace with this one to my Worcester boiler, do you think the RF part is easy to replace I mean connecting the wires from the boiler.

perfect, quick and simple, thank you.

You saved me? Thank you

A legend

Should the receiver green light be flashing or constantly on green when heating not on? Before I paired the kit, both buttons on receiver were off ...

Thank you!

If I've got a bluetooth heating controller in my hall &.another gadget it connects to in my kitchen (different rooms) does that sound right to you? It came like that in a flat I rent, but its unreliable and a pain quite frankly. I d love to hear what you think. T/Y if you reply

Thank you

Thanks 👍🏼😊

should both red and green light be off? i just did this and heard the boiler shut down

Life saver

My green light keeps flashing while pressing A H + buttons. İt won’t turn off. The antenna sign is also showing without the circle and line

Can I add more than one receiver to boiler?

Can you pair more than one ?

Thanks for saving me from ringing my landlord x

I've bought a replacement thermostat and cant get it to link to the receiver?

I have ESRTP4+ thermostat, I tried to pair with esrtprf. It didnot work. Any suggestions

My thermostat screen has stopped working, if I was to buy a new thermostat unit could I use these same instructions to pair a new one to the same reciever I have already on the boiler?

I have programmed everything, and when the heaters are supposed to be off they are still on. What do I do, is my P2 and P4 temperature to high or what?

If the receiver is paired with the thermostat, should the M/A button on the receiver stay red? What does M/A mean?

Ty

Good day I followed your instructions and pressed the A H and+ but it is not getting paired, I hold it for very long, tried many times but the green light is still blinking and the antenna is in circle, please let me know what is wrong

I've done this and now the M/A light is flashing red when the heating is on - should it be doing this?

Weldone

The green light on my receiver cannot be turned off. Is my receiver faulty?

Hello can anyone help ? the room temperature on the thermostat says HI? And not the temperature number? What does this mean? Also I can’t get my heating on as per thermostat it’s either off or constantly on…… any ideas?

The manual keeps flashing green even after the steps what am i supposed to do?

What if both are flashing

I bought a new controller same make as the old one, ESI , this one doesn’t have the circle with the antena in the middle but it’s not connected to my boiler vaillant. I am trying to pair with the existing receiver but the green light doesn’t stop flashing! Can someone help how I can pair my new remote controller to my boiler? Do I need a new receiver for this new remote control, pls help thanks

What does it mean if the bluetooth button keeps flashing every minute

I have been doing this and i the end when I go to turn the heating on the M/A button turns red and the heating won’t turn on

My thermostat wont pair and where the date shows it now says 'unboil'? Any clue?

have followed your advice but the green flashing manual button does not go off ? any ideas?

My handheld device is broken and i need to buy a new 1. Can i connect the new device to the old receiver the same way?

My manual button does not flash green. Now what?

My boiler does not work, it does not communicate with the thermostat?

Hero 🫡

I did everything you said but the green light is still flashing green

My receiver lights behaviour are not like in the video. Anyone suggest equivalents so I can re-pair? Basically I start with red and green both on and continuous from power-on, can have red off and green continuous, don't have a choice.

Better than the BS the website gives about pairing which didn’t work

Hi can i pair ESRTP4+ thermostat with ESRTP4RF RECEIVER?

We tried and green button never flashes, its on all the time

I have this problem but mine both lights are flashing red and green what shall I do

Mine says R ?

Why does the red light come on when putting central

Why is there no video on how to turn the heating on wtf

It doesn't work for me

Ĺ

Very poorly made.

my reciever wontnflsh green its always solid not flashing or if i press the other button they both fldh, one red ome green. the thermostat doesnt have the symbol saying no signal, but it is a replacement we bought, however it dlesnt turn the heating on when turning it up

What does m/a mean?

Thank you so much, so helpful