Built not bought. More impressed watching you do all this than looking at a quarter million dollar exotic car. You got to have passion to do what you do. I always wanted to do this kinda stuff but bad choices messed me up. I hope i can do something with my teenager like this one day. Stay up bro and keep the good content coming.

I watched about all your videos. Great work. Everything is always done very well and to spec. You don't cut corners or cheap out . Very refreshing

Thanks for the step by step guide amazing channel! Can’t wait to vtec the V 👌🏼

Impressive bro. Good job and clean work

From Chile, congratulations!!!!

Definitely the WHP I expected! You will have fun with it in the EG chasis. . I'm knocking weight off on my EJ Coupe. Pulled some hwy wins vs a couple K24 Si's already. The B20VTEC build is a solid platform for N/A. Power.

You ever think of doing a K swap? You got the skills for sure. I keep watching this video to learn, it's awesome man.

People always trash b20v but I ran mine for years before I sold it , it’s probably still running . Just have to do it right . New rings bearings all clearances in proper spec with proper ring end gap and it saw 8000 rpm daily .

Amazing work bro 👏

Nice weldings bro 🤘🏼🔥

this guy knows !

Beautifully done video! Had to subscribe!

Always amazing work bro. Kudos on the build. She has got to be a blast to rip on.

Thanks for the awesome vid.

Not gonna lie i hope the build comes out good cuz it looks like you didnt do the torque sequence in the right order with the head and cam retainers.. but overall you did a great job bruh 💯💯

I like the rt in the back to

Amazing 👍

very nice build man, i bet if you tune the ignition for 100+ octane fuel you would get at least 240 on the wheels, i think with a 1:12 compression you are very limited with your ignition timing on 92 pump gas...

Like a BOSS

i started tearing up at 24:53 when he brought the car down on the lift seeing the exhaust that he just welded himself like brooo i wanna learn how to do this shit so bad

Nice work

Impressive!👍

Badass!!! looking to make that kinda power out of my GSR. Already have 12:1 pistons, S2 cam gears, looking to port and polish the head, 3 angle valve job, PLM long tube tri-Y header, 2.5" catback, no cat, looking to find out what else I'd need to make atleast 200whp

Badass!

nice build, should last forever na. lsd next? maybe flex fuel set up for E85? 250whp no problem.

Nice video I also got a all motor b20v making 221hp @8500 with a 68mm tb and a 2.25 catback. Cant wait to go 70mm tb 2.5 catback and 9k rpm to see how much more power to squeeze

Amazing great Vidio...mekanik genius...

Really nice numbers, and a lot of torque. Got a b18c that makes 224 whp, but like 130-140 lb-ft of torque. Jealous of your torque figures.

Good shit bro 👌

Nice car brooo....

@UNIQUEmotorsports Where you located ? I have a swaps id like to put together

Nice Build man 👍🏻💪🏼 where did you get your cam degree kit and wheel I’m looking for a good degree wheel and setup for a B series.

Hello, or Connect your oil fittings that you took from the engine block (6.22 min)? On an oil cooler? And what kind of fitting with you used? Sorry for my english …

Looks pretty much like a stock build. I would love to get more out of my 98 B20B3 honda engine

How is your distributor holding up revving to redline? Mine seems to hate going past 8k and the rotor screw has left me stranded multiple times.

Nice video I am from Panama and I building a ls vtec, I want to know if my ls distribuitor work with a gsr head?

🔥

Top top forjado 👏👏👏👏

Noticed the wa plate, info on dyno shop? I’m in north west Washington myself.

What did you think of the header ? Worth it ? Did it perform well ?

Im confused ive seen 2 videos ppl using this head gasket with the gray side up but ive seen 2 of your videos you using the head gasket with the grey facing the block. Witch way is the correct way im confused. Im using the same zerg industries 84mm head gasket on a b20b. block.

@14:50 what was wrong with the gear? why couldnt you fit it in?

Was the Girdle installed as well? I may have missed it

You got skillz Bro! Nice sweater, by the way. Go Seahawks! Noticed you are in the same State as me…do you have a shop or just do your own projects? Just curious. I live in Puyallup, Wa. Keep grinding Bro! 🙏🏼✊💪

Nice. Looks like p72 / p30 pistons in the block.

How long this engine can run safe for internals? Are sleeve and crank safe? I am very interested because i have a b20 but i wan't to crack anything

nice build.. how does dyno dynamic read vs mustang dyno? my b18c5 with similar mods made 192 on mustang

เซนเซอร์ว้ดความร้อนใหม่ หม้อน้ำเล็ก ร้อนมั้ย?

Nice👍🔥💯

Hey.. after putting aftermarket conrod n piston on b20b, can i hit it over 8.5k rpm or more?

Great fabrication skills and attention to detail. Many don't care to degree and balance and get surprised why they don't produce good numbers with similar parts. By the way, the thumbnail with the J's Racing style intake got my attention and then saw your description in regards to the intake, which is spot on based on multiple runs people did many years ago. Since you have the skills, how about fabbing an tuned length cold air intake and pairing it with a BPI flowstack and filter? It will probably bump the numbers up a bit.

Where are you located? Just in case i need expert help in the future

Nice

Hi, I'm from Ecuador, what header did you use?

Is the block still holding up tho I was thinking about building a b20 vtec but always being told the b20 wall is too thin and that a b18 is better is that true?

Very good......!!What compression and exhaust ;

What was the purpose for the 3 dial indicator ?

very good design, what size head gasket did you use on the B20?

Was the cylinder head ported?

Stock rods? if yes with arp bolts or stock?

What kind of water pump did you use and how many teeth does it have bro

Wiseco 85 😁💥

How much did you charge for the build I need my b20v worked on

Don’t you need to lock in vtec when degreeing cams?

Hey, i am doing B20 swap into my 2gen CRX, what transmissions i can use with it?

Why did you not torque your cam caps?

What is the model number for the valve compressor tool?

was the IACV working for that patricular manifold/throttlebody

hello friend, I'm at the end of my project where I have a high compression ctr piston, I'm having difficulty because the engine doesn't work, I don't know which injectors I should install? should i also use cam degree to delay the spark point? can you help me please..thanks a lot

what injectors and fuel pump did u use?

How's the idle on the pro1 cams?

You think this setup could work on 2000 celica?

What piston brand did you used and what is the part no. Thanks

How much did the build cost?

You sure v popping?

Hi all! What is the rods at first seconds of assembly? Carillo ?

what type of hardness is that ?

after all that you put the stock exhaust manifold on ??

This guy is good! How can I get my engine to him so he can put it together and how much?

no more break in after build?

why does that boat still have its blue things on it?

Crank or wheel power ?

I have a 95 Del Sol and want to put a Bigger Engine in! Nothing Crazy... At least B16B JDM 185 HP... Anyone have any thoughts or / reasons / recommendation other than this engine? I am wondering if putting newer Model Engine in would be better simply for parts availability... any thoughts... 220 HP would be max I would put in the car... it's just for fun not racing...

No block guard?

Bro what' did the 2 hoses on the block connected too?

how is the acl oil pump any issues ?

152 engine trq or wheel trq? how high is the compression?

Mantop

Do engine builders still use plastigauge?

Stock fuel pump?

my tuner maxed out my B20B type R head at 195 hp @ 7500 RPMs and it's drop hp at 8000rpm, is this normal?

Did you use the B20 crank ? Which is better?

👍👍👍👍

What fuel you using?

how to make 12.1 compression with b16 head with ycp itr b16 head I think the b16 head have to be mill to raise comp 12.1 because a b20 with ycp and b16 make11.6.1

what head bolts you use ???

❤ 😆 /👕\👑VELOZES E FURIOSOS👑 👟

whats the title of the song

Do you do this for work or as a hobby? Awesome work by the way.

Stock bore? Stock rods n stock rod bolts?