Patreon - / evcustoms Channel Support - www.paypal.com/paypalme/evcus... EV-Customs Website - ev-customs.com Instagram - / ev_customs Facebook - goo.gl/tu3Qdk Music - Know Myself - Patrick Patrikios
Пікірлер: 48
@rhiantaylor34462 жыл бұрын
I have opened 1.3ah (no bms) and 4ah & 6ah Bosch 36v batteries and the 4 & 6 had individual cell wires to the board at the top which implies at least cell-level monitoring so a bms of sorts. The smallest Bosch barries just monitor temperature.
@mefaceache4063 Жыл бұрын
very very impressed thank you - watched the whole thing though I worked out I'll not be giving it a go myself very early on.
@lefaucheur7708 Жыл бұрын
Hi, Could you share the application you used to decode the 18650 battery?
@marvinsautocarellc42713 жыл бұрын
Thanks for the video
@barttrahan70373 ай бұрын
Very nice job and upgrade. I'm a little disappointed you didn't clean up the housing
@cvxcfvАй бұрын
Boohoo
@dtt792 жыл бұрын
Excellent video, very useful. What's the welding machine you use at 17:00? Thank you.
@alba13072 жыл бұрын
12:50 the batteries with to high IR did you change the out with some others, you skip it in the video?
@markgilbert99303 жыл бұрын
No room to spare in that case. Nice rebuild.
@tonylloyd7327 Жыл бұрын
I see you have made some very good mods to the welding tool can you tell us how you did them
@marcopinchetti5872 Жыл бұрын
what's the middle elecctrode for?
@sumeeths84233 жыл бұрын
Nice video
@olafkubbutat64283 жыл бұрын
hello, nice video. can you made a video from your spotwelder konstruktion?
@antonio.stefanelli3 жыл бұрын
Good Work!
@EVCustoms3 жыл бұрын
Thank you..!
@startcherif3 жыл бұрын
very nice video, good job
@EVCustoms3 жыл бұрын
Thanks man..
@johnrhodes33503 жыл бұрын
Sony VTC6 were a great choice I was just telling you to use some silicone spray, good thinking.
@EVCustoms3 жыл бұрын
Hello John.. Surely silicone spray would be a better choice.. but unfortunately my silicon spray was empty, so i worked with what i had... ;)
@krzysiekstanski Жыл бұрын
bosch selects the cells and, as you can see, it can do it well
@sansung906 Жыл бұрын
Is this not balanced?
@frankhenryhansen238111 ай бұрын
Done the same, but charger will not charge the battery with the new capacity. Any idea. A hint to others. Check the size of the new batteries. If they are a fraction bigger in diameter the battery pack will not go into the box. Had to omit the red spacers
@frankhenryhansen238111 ай бұрын
Fixed it. Cleaned the contacts of the charger
@gingin44843 жыл бұрын
Top
@eibdoktor26 күн бұрын
Which spotwelder should be used? Which power rating? Can you suggest a certain type / brand?
@emilen29 күн бұрын
Kweld is a good choice.
@hewhorocketh2 жыл бұрын
I have a green garden 36v battery that I left out in the sun. Oops! It won’t charge (red temp light) but has 30.4v on a multi meter. Any idea what could be the problem?
@Seawalker11 Жыл бұрын
old comment I know but in case anyone has the same problem - Charger thinks its faulty but it is probably just too flat for the charger. I jump started mine from another battery for a few seconds and charger then charged it fine
@angelograsso76642 жыл бұрын
Salve per contattare in privato cosa bisogna fare
@clippy36562 жыл бұрын
Are you sure there is no bms on the pcb? Very nice video btw!
@31_uzdankadri40Ай бұрын
What's that app name?
@Pops1802 жыл бұрын
They sometimes put the bms circuitry in the charger
@EVCustoms2 жыл бұрын
Yes this is true... but here didn't axis even balance wires for each battery... how charger read each battery and decide when must stop charging..?
@ufkcyln19873 жыл бұрын
great work but where is balance wiring
@EVCustoms3 жыл бұрын
Yea. this is mystery...
@fastmal2 жыл бұрын
hai le palle quadrate amico.top
@user-tz4ee6zo6e Жыл бұрын
скажите банки с алиэкспресс?
@EVCustoms Жыл бұрын
Alibaba drug
@LordGryllwotth2 жыл бұрын
Do you think the cells really was from 2000? Maybe it is not right.
@EVCustoms2 жыл бұрын
Maybe... but i am sure that my customer have them at least 10 years + tool shop + factory = about 11-12 years...
@norbithehun Жыл бұрын
It can be, but the battery he checked is different. INR18650-25R is not 13P. Maybe the date code is different as well. Anyway, thanks for the video and please let me know where can I buy original VTC6 cells. Unfortunately it is really hard to find not fake Sony batteries in China or even in Hungary.
@eibdoktor11 ай бұрын
Its not imaginable that a battery pack as of 2009 contains batteries of 2000!
@topgazza2 жыл бұрын
Great video. But not a task for a DIYer. No one is going to invest in a spot welding machine for one battery
@KhurshidKarimi2 жыл бұрын
I think an average house has at least 5 battery packs. Some a lot more. Considering the high cost of these batteries, a diy ability will pay good dividends. As far as home appliances are concerned, Li batteries will dominate another 10 years easily, if not for technical reasons, then surely for its light weight versus capacity.
@topgazza2 жыл бұрын
@@KhurshidKarimi I agree. I have several. If the spot welder was a lot cheaper I’d buy one and refurb my batteries that are showing signs of failing like my cordless 36v lawnmower one