Ni-Cd to Lithium Battery and Charger Conversion

Ni-Cd to Lithium Battery and Charger Conversion | NiCd / Ni-MH Battery Repair

Рет қаралды 964,565

2 жыл бұрын

Cordless Power Tool Battery and Charger Conversion - Ni-Cd / Ni-MH to Lithium-Ion
Lithium Battery + BMS + Nicd/Nimh Charger, It's a cheap and efficient conversion to upgrade your old beloved cordless power tool.
Main used parts:
- 3S 40A BMS module: shorturl.at/drsG1
- Pure nickel strip: shorturl.at/dGW23
Music by Epidemic Sound (www.epidemicsound.com)
Due to factors beyond the control of WellDoneTips, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. WellDoneTips assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. WellDoneTips recommends safe practices when working with the tools or equipment seen or implied in this video. Due to factors beyond the control of WellDoneTips, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not WellDoneTips.

Пікірлер: 190

@tcap7917 Жыл бұрын

Lithium battery charger $6, 18650 cells $18, BMS module $6 ...Your talent...Priceless.

@UGPepe 4 ай бұрын

spot welder, 3D printer

@dendys04 2 ай бұрын

@@UGPepe u dont need 3d printer u can just glue the cells and spotwelder board costs like 20 or u can just solder the cells ik its not safe tho

@blueback21 Ай бұрын

Soldering the cells isn’t safe?

@viswanathanramakrishnan7613 Жыл бұрын

This is what I was expecting from conversion of the old ni-cd batteries to lithium-ion battery pack and the chargers requirements and how to fabricate such a charger. Thanks a lot.

@wimpraet5161 Жыл бұрын

Wow, I have never seen such a super quality film here and it seems to be 4 K quality and the revision of the old worn batteries is TOP and even the manufacturer could not do it better. I would certainly entrust my device to him for the repair and you will not find many such perfectionist repairers.

@andrew_koala2974 3 ай бұрын

I had three cordless drills - two of which were at least 13 years old - and had been sidelined fro almost a decade It was only a year or so ago that I had to repair a LiOn Battery in a MAKITA cordless drill -- It was then decided to convert and re-pack the three Power tools that were set aside - and convert them to LiOn It certainly was better than dumping them. I see many for sale at local Trash & Treasure markets - being sold for the equivalent of USD $3 - unfortunately not many of then have the charger to go with it -- so selling them after a modification has been completed - makes it difficult to SELL sans charger

@divyajnana Жыл бұрын

Nice touch updating the charger too. A great updated drill at a great price, nice job.

@MotogiantTL Жыл бұрын

Awesome instructional video! Concise, simple, and no drawn out "look how smart I am" speeches! Bravo!! I am 100% going to do this!!

@howardosborne8647 4 ай бұрын

Absolutely superb battery conversion job👌 I have gone a different way to convert several of my old 18 volt Dewalt NI-CAD/NI-MH power tools to Lithium Ion. I use the original NI-CAD battery top cover and battery connector and attach a slimline Lithium Ion adapter shoe directly to the original NI-CAD top plate. This assembly of old top plate and Lithium adapter shoe is then fixed into the power tool battery port with 4 small self tapping screws and then a standard Dewalt 18 volt Lithium Ion battery can be fitted to all the modified power tools. So far I have successfully converted an 18 volt cordless vacuum cleaner,a 165mm trim saw, a compact angle drive drill and a SDS masonry drill....all work very good on the Lithium Ion packs.

@battmanbattman5308 2 ай бұрын

You can actually buy the complete adapter (very cheap) which is very good quality and also has USB out. Search Battery Adapter DM18D With USB, Compatible With Dewalt 18V Tools

@gjt2209 2 жыл бұрын

Very nice, well thought out conversion done to a high standard. Thanks for sharing your ideas.

@ryanmacewen511 Жыл бұрын

This has to be one of coolest battery conversion videos ever! Super clean. Nice job! Liked and subscribed!

@somebeinganonymous Жыл бұрын

Very neat and tidy video. Great content as well; especially enjoyed the effort you went to with upgrading the original charger.

@ksfurlover2 Жыл бұрын

Thank you for the instructions on the conversion process. Hardest part was following the battery wiring - parallel / series. But, I have my Ryobi 12v drill converted :)

@kevvyg04 6 ай бұрын

Probably the best conversion O have ever seen with great detail !!

@Ivan-Archer 4 ай бұрын

Top class video with very clear instructions. My tip for sourcing Lithium ion cells is to check out your recycling centre where these 18560 cells can be found in every tool battery also in hoovers and anything else using lithium batteries such as hoovers etc. An almost limitless supply of free good batteries.

@welbyroberto6581 2 ай бұрын

During Covid-19 I found couple half used cans of interior white paint and I decided to paint the garage. I needed a 9v battery to test out something and found 2 good ones....all in our localrecyclecenter.

@dave_bob Жыл бұрын

Have you posted the STL for the battery holder? Nice job on the conversion, it's good to put older tools back to use.

@zenzen9131 2 жыл бұрын

Best Lithium conversion project ever !

@hippie-io7225 2 жыл бұрын

Beautiful conversion!

@xtndz3320 5 ай бұрын

Excelente, tenía algunas dudas en renovar mi taladro 18v, seguí las instrucciones ocupe bms 5s y quedó perfecto 👌

@juancarlossanchez118 Жыл бұрын

Impresionante, lo ha hecho perfecto y con gran facilidad.

@viorsa8200 2 жыл бұрын

Excelente tutorial , sus conocimientos de electrónica son muy grandes , muy buena transformación , gracias por compartir sus conocimientos y experiencias , un saludo cordial y por supuesto un gran like desde Narón (Galicia) 🤓 🔝 💨

@MCsCreations 2 жыл бұрын

Brilliant work, dude! Nicely done!!! 😃 Stay safe there with your family! 🖖😊

@eduardomr8110 8 ай бұрын

Increíble cambio ,justo eso le pasa a mi atornilladora,felicitaciones

@megeezer69 Жыл бұрын

Very well done. Extremely informative & well paced

@Fierofreak01 2 жыл бұрын

Very cool way to recycle a power tool that still had some life left in it! And it was way more cost efficient to make those modifications then buying a new drill set! Where did you get the batteries from, that price seems really good to me.

@andymuzzo8568 2 жыл бұрын

Awesome importation. Thank. I’ll do this for my stack of 18v & 14.4v dewalt batteries.

@EmmAyeVee Жыл бұрын

As much as i like fixing items instead of throwing them away and spending more money on replacements. Because would doesnt like to save some money. But in this case, i ended up just buying two battery packs for my cordless drill for thirty bucks. None the less, great video.

@lwh7301 7 ай бұрын

I purchased a brand new Black and Decker 20v lithium impact drill/driver for $49.95. I know it's difficult tossing perfectly good tools with bad batteries, but still. I have other drills, but that's the only one I use now. It's powerful and changing bits is super easy. The money and time you spend to get the batteries and other parts and then assemble, it's cheaper to get something new and modern.

@thisisyourcaptainspeaking2259 2 ай бұрын

Very nice! I have a similar Dewalt drill/charger configured for NiCAD cells.

@Stisse12 2 жыл бұрын

Nice and clean Recycle!

@murraystrand 2 жыл бұрын

Wow. Nice work! Very well done.

@martinmuldoon603 2 жыл бұрын

That was purely a fascinating upgrade to lithium Ion. Your the best.

@frenchcreekvalley Жыл бұрын

Good ideas and a great job! Very informative.

@janbuttig4819 7 ай бұрын

Those stickers at the end killed me! Yes. I will never try to fix anything again! Thank you?

@outtadebox1877 4 ай бұрын

Nice job once again. If I have time I'm gonna see if I can do it. Providing I have all the parts still.thanks

@osmancanbaz7312 Жыл бұрын

Good job İs it possible to see your spot welding(how did you do that)

@googlefuuplayad9055 2 жыл бұрын

Very cool 😎👍👍 How did you make the sticky labels? Did you order them, how?

@georgivoyvodov1123 Жыл бұрын

I upgraded my old cordless drill with 6S Li-po Graphene battery and brushless motor . the 18V Ni-Cd battery was dead long time ago and the brushed motor was gone. Now I have brand new top notch drill with invested 100 bucks and few hours work.

@mikaeljonsson4686 Жыл бұрын

Thats one awesome project! Thank you for sharing, great job and good explanation! You got a new subscriber! 😉

@gabrielhoy6790 4 сағат бұрын

Amazing video, and just the information i was looking for! Could you please also specify what spot welder you are using? I don't have one, or access to one.

@Waaasil Жыл бұрын

Thank you very much for this educative video.. Well Done

@ronsen9974 Жыл бұрын

Very helpful video. I like your battery spot welder. Were can i get one like that from. Regards

@fishheadH2o 7 ай бұрын

Cool video !!!! Can you do this with the 18v DeWalt ,and provide links to all the parts?

@joseluisprieto3438 Жыл бұрын

Very good job, the cells are high discharge ? or are they recycled from Laptop?. I did a similar job (But not as good) for a Dewalt 18V Drill and only 5 cells (21V) fit in the case, using a 5S 100A BMS from the silver ones. And I did exactly something similar with the charger using a 24V Printer transformer, but it must have a protection circuit because it deactivates 0V when connecting the battery, I have to do it several times. Greetings from Venezuela

@mariaassuntadinucci-io8ze Жыл бұрын

congratulations for the work done, could you recommend me a link to get some batteries to do the same change? Thank you

@med5241 Жыл бұрын

Very nice tuto, great thanks.

@omarbaalwi3544 Жыл бұрын

excellent well done 👏🏾

@Igor-ge1py 2 жыл бұрын

Super talented!

@boblevey 8 ай бұрын

Excellent!!! Thank you

@R3cce 8 ай бұрын

Actually, he replaced the old nimh (nickel metal hydride) battery. Not nicad

@MechmanGetrieb 7 ай бұрын

Really god !! Thanks for sharing.

@jamesocker5235 Жыл бұрын

Nicely done

@gregorvetter6588 Жыл бұрын

Real cool. Great respect

@Bianchi77 Жыл бұрын

Creative video, thanks for sharing :)

@bobcat2378 4 ай бұрын

Awesome job!

@titroxmexico Жыл бұрын

Real Men stufs... Thanks Bro.

@kadirince 2 ай бұрын

Elinize sağlık

@MrManjinder123456789 5 ай бұрын

Looking like witching neat and clean electronics amazing

@tf1389 Жыл бұрын

great job thank you

@jured7383 Жыл бұрын

Great video, nice tips, would do it too for my oldy but goody DeWalt DC981 ... BUT ... am too scared of fire/explosion of Li-Ion batt's. If something burns in ''3S 40A BMS'' overcharge protection might be disabled and than BIG BANG. While if the fire breaks out in the Li-Ion there is literally nothing you can do to put it out. I do a lot of handy work, sometimes charging in the house, in the shed also in the room or adjacent room, where I work, so ...... rather no Li-Ion. Will go with 1,2 V LiitoKala Sub C, 3500 mAh, Ni-Mh and sleep tight :).

@screwsnutsandbolts Жыл бұрын

Excellent videos ! 👍

@davesherry5384 Жыл бұрын

Great video! Very, very helpful. I wonder if you know how I can charge Li-On 18/20V power tool from a vehicle (12V supply without using an inverter? Can I modify a charger to be powered from 12V rather than 240Volt? PS Loved your mini bar build - I am going to do one of these for our camping trips and fool the Mrs.

@kennmossman8701 Жыл бұрын

how I can charge Li-On 18/20V power tool from a vehicle (12V supply without using an inverter? 1) use a BUCK converter to 'up' the voltage 2) use a battery charger CIRCUIT to charge the battery7

@marcosramirez385 Жыл бұрын

Long ago I also took apart an old battery but I just replaced the cells with the same chemistry and spot welded together. If I knew I could upgrade to lithium I would would have done so.

@bienvenidoyoungjr.2433 Жыл бұрын

Awesome , good work,

@rc-huina8221 Жыл бұрын

Good job 👍🤠

@pmacgowan Жыл бұрын

Nice conversion :-)

@HowToRestoration 11 ай бұрын

Well done 👍

@perhagglund5595 6 ай бұрын

I am about to do this exact repair on my dewalt, exactly like the one in the video. Do you mind sharing the exact parts and numbers that you used?

@PhG1961 2 жыл бұрын

Awesome !

@brooklyn_productions 3 ай бұрын

Nice video a diagram would of been cool, since the important, most intresting part was not shown totally.. the wiring of the batt wasnt shown rite, wish u would of spin o turn all around to see all the detail of the soldering u say parallel, but i was only able to view how 4 of 6 batt was spot weld. 2 batt i wasnt sure of🤔. where they bridge to the rest of the batt or soldered directly to the board??

@Kevinhaghighat 9 ай бұрын

This is great and exactly what I've been looking for. By chance can you post or send me the STL files for the printed battery holder parts?

@nicolasparadis1407 6 ай бұрын

Excellent!

@jenntek.101 10 ай бұрын

Very nice. I did the same thing with battery pack, and charger for my old Black n Decker Drill and charger. (People make fun of the brand; but, Hey! it works!) I used batteries from a Dewalt 20v. One cell was bad out of the pack. I also used a cell to replace the battery in my NON-Repairable electronic cigarette. Never toss Lithium Ion Battery packs; There is a use for them! Make something!

@mjc0961 Жыл бұрын

I'm not sure what's a more obvious giveaway of the age: that it's a Ni-MH battery, or that it's got screws so you can easily open it.

@madjdoubakermi6357 6 ай бұрын

شكرا لكم اخي

@craigvickery9283 Жыл бұрын

You make it look all to easy

@elvisdepaula8312 2 жыл бұрын

Muito bom

@robertofernandezvazquez8755 2 жыл бұрын

Awesome!!

@leovolin7525 7 ай бұрын

What's the voltage on these batteries? I thought it is 3.7. These are like 2.1V?

@drchan5893 10 ай бұрын

great video sir, I have the same drill with the battery no holding charge , So i will do the same Conversion. I think the battery Circute board will over-heat if using continuous drilling.

@mehranalipour320 Жыл бұрын

Very good

@CopycatStudiosLA 8 ай бұрын

How long did it take for you to learn all these stuff for you to just confidently REMOVE everything?

@bayloruniversity5812 4 ай бұрын

Do you have a video converting older 18v Ryobi Ni-Cd batteries? That would be so awesome if you do, please make one if you can, thanks and great video!

@litsteve1968 3 ай бұрын

Kolejny dobry pomysł aby usprawnić elektronarzędzie któremu padło zasilanie

@vladozuzula3755 5 ай бұрын

Hi. Do you have a sketch of the holder for the batteries, please? Well thank you

@marcosarb80 Жыл бұрын

Una BMS 3S de 40A no es demasiada corriente para la descarga? No seria mas recomendable una de BMS 3s 25A? Gracias y gran video Compartirías el stl del modelo de las pilas con la inserción de la bms ? 😊

@stefanvarlan9256 Жыл бұрын

Tradu în română

@marcosarb80 Жыл бұрын

@@stefanvarlan9256 Nu este un 40A BMS 3S prea mult curent pentru descărcare? Nu ar fi mai recomandabil un BMS 3s 25A? Mulțumiri și mare video Vrei să împărtășești stl-ul modelului de baterie cu inserția bms ? 😊

@countryside8122 Жыл бұрын

I added a female adapter to my battery so you could use the wall wart to charge the battery. Much easier. Great video in converting!

@igorfilipovic6188 8 ай бұрын

do you have stl fil for holder

@steveclark3379 Жыл бұрын

Very Nice 👍

@EL90291 Жыл бұрын

Could you share the STL files for the holder for the battery . Thank you

@marklangley1122 4 ай бұрын

Hi, really interesting video, your drill/battery/charger were at 12.5v, I have a Bosch 14.4 volt drill and I have found on eBay BMS module 4S rated at 16.8v, assuming 3S is not able to cope with 14.4 volt, am I correct to use the 4S ?

@geried. Жыл бұрын

Pervect ..... Top !

@fishsalt Жыл бұрын

Do you provide this as a service? For other brands

@josephbohme7917 8 ай бұрын

So intelligent & talented sir what is the price of entry to send my old packs and charger to you and your upgrade fro them to the @15v level?? seems so easy but we all learn by doing but you have backend stuff we do not. Thanks

@Iamsuccesspro 2 жыл бұрын

Awesome

@piotrnapieraa5422 Жыл бұрын

Super 👍👍👍

@blueback21 Жыл бұрын

Brilliant, I’d like to try that, but it’s kind of intimidating if you’re not a pro like you

@user-xq7to9rd4h 11 ай бұрын

Can you give a link to the model for printing the 18650 battery holder? pls

@oldboyperi6166 Ай бұрын

After you had bms on battery pack what will happened if you charge with original charger ?

@carlosdantenicolasdelafuen1293 Жыл бұрын

Gracias 👋👋👋👍

@tedlofland3446 2 ай бұрын

Most NiCad battery packs have a thermal fuse that goes bad. If you compare positive to negative on a good battery and a bad battery one of the terminals on the battery will not show voltage.