Even The Kia Dealer Couldn't Fix It!

  Рет қаралды 1,378,898

South Main Auto LLC

South Main Auto LLC

Жыл бұрын

Come along as I have a look at a 2015 Kia Sorento that has been at the dealers countless times and another local shop to see why the heck this thing won't start! It cranks over just fine but won't start.... sometimes. The other shop towed it to me to see if we could make heads or tails of it. Let's have a look.
-Enjoy!
If an SMA Video has helped you out please consider giving using "Patreon" to help support us. The videos take real time to create and pull us away from real work that pays our bills. CLICK HERE: / southmainauto
CHECK OUT OUR "SMA SWAG" STORE! Go on Teespring and get your very own SMA merch!
teespring.com/stores/the-sma-...
If you don't like Patreon feel free to use the "PayPal Me" link: www.paypal.me/SouthMainAuto
The South Main Auto Amazon Store:
www.amazon.com/shop/southmain...
AES Wave Automotive Diagnostic Tools: www.aeswave.com/cart.php?m=af...
Thank you for all the continuing support!
--Eric & Vanessa O.
Feel like sending some swag to SMA because you love the videos but don't know where to send it?
Just ship it here:
South Main Auto Repair
47 S. Main St
PO Box 471
Avoca, NY 14809
Disclaimer:
Due to factors beyond the control of South Main Auto Repair, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. South Main Auto Repair assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. South Main Auto Repair recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of South Main Auto Repair, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained.

Пікірлер: 4 700
@miked1365
@miked1365 Жыл бұрын
I am a retired electronics technician and want to say your troubleshooting is impeccable! You allowed your testing to take you down the path as most try to imagine a solution and then try to prove it. Bravo Sir you are elite!
@postal5342
@postal5342 Жыл бұрын
in the same field and Yup. This is a prime example of good troubleshooting.
@hard2starboard312
@hard2starboard312 Жыл бұрын
Retired USN ETCS here, and very much agree.
@dentech4710
@dentech4710 Жыл бұрын
I am also an electronics tech. 95 percent chance it was in the solder connection, and a 5 percent chance of a faulty fuse.
@erg0centric
@erg0centric Жыл бұрын
I am also a (semi)retired electronics tech. First real job I had was with a team. I would take the boards others put back on the pile and fix them. Of course I took more time per repair. I was told I was taking too much time. Next company.
@DarkLinkAD
@DarkLinkAD Жыл бұрын
@@dentech4710 Ive bought entire batches of intermediately failing fuses from gas stations. They often arent even the proper thickness.
@TheBrothers759
@TheBrothers759 Жыл бұрын
The fact that you took into consideration that woman's personal life when it came to how you wanted to fix the problem, that's just amazing
@jdtractorman7445
@jdtractorman7445 Жыл бұрын
That's how I approached working on vehicles too back when I worked on them. I worked on their vehicles with the thought of it being my own car. I always considered what was the best repair as far as longevity goes.
@XqeDiosxqe
@XqeDiosxqe Жыл бұрын
Then again that lady punches really hard and don't want her coming around the shop.
@rellmonger7935
@rellmonger7935 Жыл бұрын
@@XqeDiosxqe lol, right
@sohendo2211
@sohendo2211 Жыл бұрын
The fact that the dealership knew it was the box and didn’t even try replacing a $78 part is crazy.
@kazifluff
@kazifluff Жыл бұрын
The dealership would also prefer to try and sell you a new car, rather than fix one that's eight years old...
@bills6093
@bills6093 Жыл бұрын
They want to sell her a new car, give her nothing for her trade in, fix her trade in for less than $78, and then sell that too.
@jessiepooch
@jessiepooch Жыл бұрын
@paul feasal Along with over 800 other companies.
@scottaustermiller2412
@scottaustermiller2412 Жыл бұрын
​@Paul Feasal if people cared about CHILD SLAVE LABOR probably would stop buying Chinese garbage or so called American garbage made in China "gm" Buy Honda more American then a "chevrolet "
@EyeMWing
@EyeMWing Жыл бұрын
We likely saw why in the service data - it has you check the electrical circuits, and the relay itself (as if it were a discrete component that can be replaced!) and if both of those check out, it sends you to the PCM. If you stick your probes right on those solder joints to test the relay itself, it's going to test fine, because you're bypassing the broken solder joint between the board and the relay. The instructions should have you testing the relay *from the fuse sockets and connectors* Dealers are often married to the official procedures, and the service data is mostly copied from the official procedures.
@deanwood2332
@deanwood2332 Жыл бұрын
As a Mechanic, I appreciate and enjoy watching you work through the process of diagnosing the fault
@dependablehac
@dependablehac Жыл бұрын
Man I’ve been a HVAC tech for 27 years and was probably set in my own way. When I started watching your videos it made me start thinking of better ways to do my job better. Just wanted to say thanks and your the man!
@heavydiesel
@heavydiesel Жыл бұрын
Same here!
@ludvigericson6930
@ludvigericson6930 Жыл бұрын
It’s called deliberate practice and it’s why we must stay humble, even in seniority
@kevinbennett2565
@kevinbennett2565 Жыл бұрын
Same here man hvac 14 years 🤙
@dpdeere
@dpdeere Жыл бұрын
Electrician for 50 years and I’ve troubleshot a lot of computer operated machinery. Retired now and love watching Eric as he works his way through the complicated electrical systems in these vehicles. I try to outguess him at times as to what will fix the problem 😂. Eric you do a great job and we think a lot alike. Keep up the great work!
@JohnRodriguesPhotographer
@JohnRodriguesPhotographer Жыл бұрын
I am not an HVAC technician. I am a retired IT operations supervisor. I have a pretty old air conditioner system attached to my house. It is old enough that the wiring is starting to get a little iffy in places. Cost me a couple hundred bucks anytime it breaks. Beats the hell out of 8 to 10,000 to replace it. Often when the technician comes out I have checked the basic external things not opening the central air unit out on the ground, and have noted sometimes that I wasn't getting 220 into the fan or the compressor. Different occasions. And the technicians come out and all they have to do is take the cover off and they'll find a broken wire or something and they just have to visually inspect sometimes I'll double check with an amp clamp. But I've had a few technicians over the years ask me if I had worked in HVAC. I just pay attention to when someone's working on my air conditioner, I like to watch and learn something. I've always been that way. I already told you what I retired from, I know how to put up drywall, work with cinder block, to be honest I hate that, do carpentry and basic electrical work around the house, I can also do plumbing. All my life will at least since I was 10 I've been cranking wrenches on anything from a lawn mower on up. I am just a naturally curious and attentive person when something's going wrong. I remember a long time ago obviously my dad was going to throw out a lawn mower because he couldn't get it to start. Now you have to understand my dad was my mentor for a lot of what I can do. I asked him if I could take apart the mower and see if I could fix it, he said go ahead it's your time to waste! I tore it down and I adjusted the gap on the coil and the flywheel. I also cleaned the contact breaker points and I checked the carburetor to make sure there was no water in the tank or anything in the bowl. Dad had already checked that but I checked it anyhow. You should have seen my dad come running out of the shed when I pulled the recall starter in the dang mower started right up. You can see a part of him was annoyed that he couldn't fix it or didn't, but he was also proud as hell that I did. The mower was 10 or 11 years old. Daddy got it in 66. So he had already bought a new one. It was fun to find out it was probably the gap on the coil and the flywheel.
@1995dresser
@1995dresser Жыл бұрын
Eric is very humble when he says just remember if I can do it you can do it apparently that's not so because he's the end of the line where all others have failed at even simple diagnosis procedures Great job Eric
@jack002tuber
@jack002tuber Жыл бұрын
Yeah, seems the Kia dealer shop is not part of that equation 😕🙄🤣🤣🤣
@REDMAN298
@REDMAN298 Жыл бұрын
@@jack002tuber Don`t forget the dealer mechanics are not making big money anymore. jmo Then the go to guy in the dealer gets all the stuff the other guys can`t fix while those same guys get the gravy work. Been there done that. It`s hard to concentrate when you`re getting shafted.
@uenragedbro
@uenragedbro Жыл бұрын
He makes it look simple from experience, trust me.
@chrishartley1210
@chrishartley1210 Жыл бұрын
Remember also that the training programs teach them that the computer will pinpoint the fault. When it doesn't, they don't know where to look next. Eric's approach uses the computer to narrow down the search then manual methods pinpoint the fault. Rarely is any of this fault finding particularly difficult but using logic and methodical testing is vital.
@nevoyu
@nevoyu Жыл бұрын
More often than not it comes down to patience.
@hvac4u2
@hvac4u2 Жыл бұрын
You're a credit to the trade. Great skills. Correctly diagnosing a problem like these, breaking it down and following the path of logic and reason is very satisfying. It's a mindset thing that crosses over into many disciplines. Hopefully there's a younger crowd that's watching and listening. We are running a little short lately!
@dennyheitzer9457
@dennyheitzer9457 10 ай бұрын
Your observing the ring around the connection point solved the intermittent issue. I serviced hospital radiology systems for 47 years and was named "Intermittent Man" because I followed my adage, "High tech intermittent problems always fail low tech." Solving Intermittent problems require extreme attention to detail and a thorough understanding of how it operates and how it can fail. That's why I tune in to your channel. You did well.
@danieldunham9978
@danieldunham9978 Жыл бұрын
Its awesome to see a mechanic truely care that the problem is fixed properly!
@mikechapmanmedia2291
@mikechapmanmedia2291 Жыл бұрын
Right? When he said the bit about "I see all those car seats in the back," you know his heart is in the right place (which we knew, but still!)
@user-ARK1547
@user-ARK1547 Жыл бұрын
That's because Eric O is a father and has been there And knows stranded with kids is tough on the kids and the parents. He's a top technician who goes the extra mile and does it with heart and passion to solve the problems and get to the root causes. Many mechanics like him out there that are honest and take pride in their work today it's rare to find honest and skilled that get the job done right and don't send you off with a come back repair .
@androzetga1916
@androzetga1916 Жыл бұрын
Good job.
@stonelemon03
@stonelemon03 23 күн бұрын
most of us do , there is a minority that don't.
@bowentown7344
@bowentown7344 Жыл бұрын
You REALLY gonna leave us all with a cliff hanger of unfinished business: Choco or Berry muffin?
@SteveOnTheRoadNH
@SteveOnTheRoadNH Жыл бұрын
As a service technician myself, I always take the logical path rather than just assuming and having the Boss throw money at it praying it will solve their issue. Better customer satisfaction figuring out what the root cause is….great video!
@davidswingle6521
@davidswingle6521 Жыл бұрын
I love diagnosing issues like this. Patience is a virtue that most dealerships don't have. They throw parts at something until it's fixed. I hear that everywhere. Congrats on your clever diagnosis!
@eugeneenslow8563
@eugeneenslow8563 8 ай бұрын
And the DISGUSTING, DISGRACEFUL part is they CHARGE US for the parts, whether those parts fix the problem or NOT.😬😠😡
@NaberAuto
@NaberAuto Жыл бұрын
As a technician for over 50 years and shop owner for over 40 years, I find your posts entertaining. Your photography and description of the logical path to solve the problem is always interesting - and BEST of all, you don't waste a bunch of time talking and talking about irrelevant things. Short and concise - good video editing, and you fix the hardest problems in a half hour or less. And we all appreciate your approach. No "Throw parts at it until it's fixed" like we see from shops in our area a lot of times..... Great job
@williampotter2098
@williampotter2098 Жыл бұрын
"Throwing Parts" isn't just in your area. It's caused by young, poorly trained and inexperienced mechanics. I suppose if the wages were better people would stay with it long enough to learn how to do it right. But it isn't just a car mechanic problem. Most corporations have tweaked their system to where they can pay the actual workers as little as possible while paying the C-Suite stupid money for sitting at a desk. Do CEOs really need to make $60million a year to do the job? The company's output sucks but then they just pay to advertise more and get new unknowing customers. If you find a good business, use it even if it costs a bit more.
@twerktospec
@twerktospec Жыл бұрын
A lot of projecting going on here
@craigmccolm285
@craigmccolm285 10 ай бұрын
Same here
@midwestmutineer7675
@midwestmutineer7675 Жыл бұрын
This is gonna sound...weird? Hahaha. I lost my dad in 2016 and we would work on everything on our farm. Our trucks, our tractors, trailers, everything together. You sound so much like him. And watching your videos and watching you track down every issue no matter where it leads to take care of people makes me miss him just a little less. Thank you!! :)
@SouthMainAuto
@SouthMainAuto Жыл бұрын
I miss my dad too he died three years ago on the 22nd of this month
@alexandercopeland2849
@alexandercopeland2849 Жыл бұрын
My grandpa was same way, he died in 2015 February. He had a very high iq and could fix anything. He also built lot of things for people. My grandpa and I when i was in high school built our own gaming pc from scratch including circuit boards and all.
@For--nop
@For--nop Жыл бұрын
As someone that does microsoldering repair I want you to know you're doing a great job at isolating the true issue and fixing things "the right way" with consideration to the customer and their needs. In this case I think you landed on the right solution but please have some confidence in your solder holding. If you could physically see a loose joint (i.e. you know you're hitting the problem area) reflowing the solder on that will hold for years and years if not the life of the vehicle. Your reflow was probably stronger than as the joints come from the factory!
@SmogFighter
@SmogFighter 10 ай бұрын
I’m with you on the strength of the repaired board. The lead-free solder that is used today is brittle and easily damaged.
@TassieLorenzo
@TassieLorenzo 9 ай бұрын
@@SmogFighter "The lead-free solder that is used today is brittle and easily damaged." Is adding some leaded solder (as was done here) a better idea than just reheating the factory solder? Lead-free solder seems to cause lots of problems in cars. 😐 While this part was pretty cheap, other parts can be very expensive and I'd probably trust a part repaired with leaded solder just as much or more than a brand new part (e.g., 8th gen Civic hatches have the same radio & climate display as CL9 Acura TSXes and repairing the display pin connections with leaded solder is virtually free compared to the $500 that Honda wants for a brand new display!).
@user-jd5sj8jx7r
@user-jd5sj8jx7r 7 ай бұрын
Many military products forbid lead-free solder due to tin whisker issues and poor reliability. Reflow with rosin core leaded solder is an acceptable mitigation.
@TassieLorenzo
@TassieLorenzo 7 ай бұрын
@@user-jd5sj8jx7r I wonder why automotive regulations in some markets demand lead-free solder at the expense of reduced durability. It seems kind of dumb. But I guess all these "recyclability" regulations are based on cars being used for 7 years or so and then being dismantled and recycled, not spending 35+ years in use like military equipment (or as some private car owners want their cars to last)?
@FourSeasonsNorth4x4
@FourSeasonsNorth4x4 5 ай бұрын
Which leads me to my thought…how do you know the new one from the same factory(possibly) may or may not have the same problem. I now refer to the silver solder problem GM trucks had in their guage clusters..many of those joints also failed after a few years rendering many of those clusters useless..also creating a whole repair business in rebuilding them as it happens. Rebuild was simply resoldering broken circuits. Hopefully the new one is built properly and soldered correctly.
@edgemeemailcom
@edgemeemailcom Жыл бұрын
You're not a bull in a china shop. You analyze. There are too many parts changers. Kudos my friend.
@scooterwoodley195
@scooterwoodley195 Жыл бұрын
I’m always impressed with your electrical diags. There are a lot of great “mechanical” mechanics out there but this level of expertise is rare.
@2DogsVlogs
@2DogsVlogs Жыл бұрын
Electrical issues scare the crap out of me. I'm the same age as Mr O but give me a carb, manual fuel pump as three speed auto\4spd manual any day. I'm learning now though. Guess you're never too old too learn. Workin on a 2020 Kia right now. Parking sensors resetting & cigarette lighter turning off and on. Starting with the cabin fuse box as there's been a tinkering.
@alfredocarpaneto5976
@alfredocarpaneto5976 Жыл бұрын
You are an asset to your community and I hope your local people realize how lucky they are to have such a pro grade mechanic in their town. God bless you and yours.
@tedtedness184
@tedtedness184 Жыл бұрын
You sure are correct there.
@brucesherborne408
@brucesherborne408 Жыл бұрын
Honest, professional and competent technician. Gives us all hope they are still out there 👍
@jamesculp3622
@jamesculp3622 Жыл бұрын
I don't own a Kia, but I found your process really helpful, as I'm not a guy who likes "unicorn fixes" that fail only when it's raining, snowing, dark, cold and isolated. Thank you for sharing.
@shauno3697
@shauno3697 Жыл бұрын
Learning what the problem isn't is as important as learning what the problem is. Awesome work, as always!
@additudeobx
@additudeobx Жыл бұрын
Thomas Edison, "I have not found the one thing that works yet, but I do know the 100 things that do not work".
@richardluce775
@richardluce775 Жыл бұрын
There’s a big difference between “got it runnin” and actually finding the problem and fixing it. Love the don’t accidentally “fix” it without knowing what fixed it. Your the man.
@NoName-zn1sb
@NoName-zn1sb Жыл бұрын
you're
@richardluce775
@richardluce775 Жыл бұрын
@@NoName-zn1sb Sorry, my soldering iron wasn’t quite to temp when I typed “your”.
@pretzelogic2689
@pretzelogic2689 Жыл бұрын
As a product development technician in computers as a career, I found your process to be perfect. All you said and did was logical and methodical -- a real joy to watch. Lot of times first appearances and symptoms can be deceiving. You seem to have taken a path to avoid introducing confusion into the intermediate diagnostic results. And saying "I don't believe I have fixed it" is an excellent comment in this case.
@vtjmproductionsusa2390
@vtjmproductionsusa2390 9 ай бұрын
And this is what seperates the Men from the Boys. Great repair. Great diag. Great video.
@timd1833
@timd1833 Жыл бұрын
Might be a good idea to get another fuse box cover from the junk yard to prevent water (rain, car wash, etc) from getting into the fuse box. Great t/s & video!
@baldy95307
@baldy95307 Жыл бұрын
That's why God invented duct tape.
@claytonfite3197
@claytonfite3197 Жыл бұрын
@@baldy95307 find the missing piece and super glue it.
@robertdorsch451
@robertdorsch451 Жыл бұрын
Black gorilla tape
@tangodad3320
@tangodad3320 Жыл бұрын
Lmao
@Blackfinger00
@Blackfinger00 Жыл бұрын
Or buy a new one at the KIA dealer. Can't be expensive.
@douglasmartin5253
@douglasmartin5253 Жыл бұрын
I’m honestly in awe of how easy you make things like this look.
@Cheepchipsable
@Cheepchipsable Жыл бұрын
Just edits out the hard stuff...😅
@facekickr
@facekickr Жыл бұрын
Hey, you just demonstrated how you troubleshoot an issue whether mechanical or electronic. Really impeccable work! Lots of folks take this approach for granted and I really appreciate you putting in the time to research, read and develop your approach. Really well done.
@jfrancis98
@jfrancis98 8 ай бұрын
Especially with a problem child, never assume anything. You are a true technician. Keep it up. Thank you!!
@athhud
@athhud Жыл бұрын
No joke, I cheered in my head when you said that you were going to reflow the solder joints! I am so proud of you for not letting the soldering iron scare you away this time. Lol I have a feeling that in the times of “everything is back-ordered” you might get more into board repair than you like.
@tinkerscorner54
@tinkerscorner54 Жыл бұрын
That's a fact!
@v12alpine
@v12alpine Жыл бұрын
Same
@TravisFabel
@TravisFabel Жыл бұрын
I was very happy to see that too.
@adamlevin6088
@adamlevin6088 Жыл бұрын
And, to be honest, I think I'd trust Eric's re-flowed solder repair over a new factory part...
@throttlebottle5906
@throttlebottle5906 Жыл бұрын
great for troubleshooting, but it's not wise to leave such a major "repaired" part in customers vehicle. say it was to stall out on train tracks and get hit, who's liable now? up next: customer with lawsuit against you/business for modifying electronical parts. 30+ years ago, people would have been "tickled pink" and grateful for however long it lasted. I only repair things for myself, relatives and close friends now. not worth the risk of idiots going off the rails.
@bladecutter1
@bladecutter1 Жыл бұрын
I can't imagine how much the car's owner spent at the first shop, and then at a Kia dealer, and not have a fixed car afterwards, but then only to then spend 1 hour diagnosis time + $78 at Eric's, and now the part is on order, and runs perfectly.
@KY.0009
@KY.0009 Жыл бұрын
Eric probably has another customer for life
@harleyvulcancobra4.619
@harleyvulcancobra4.619 Жыл бұрын
If I took my car to a shop and they couldn’t fix it , I don’t think I would owe them anything! I don’t take my cars and motorcycles to anybody else, I fix them myself! Some people are just mechanically inclined and some are not! You definitely are!😎🇺🇸🏴‍☠️🇺🇸🏴‍☠️🇺🇸🏴‍☠️🇺🇸🏴‍☠️🇺🇸
@1967250s
@1967250s Жыл бұрын
As a tech like so many other posters, I would bet your fix is better than the factory soldering job. Good work as always.
@davemaccarter64
@davemaccarter64 Жыл бұрын
My kind of technician, one who actually finds and fixes what is broken instead of three things that aren't. Worth whatever he charges, which will no doubt be well within reason. Bravo!
@ciberboy395
@ciberboy395 Жыл бұрын
This was absolutely beautiful to see! Seeing a mechanic going through a process to find the actual root cause of the issue without simply swapping parts trying to guess what is actually wrong. You're the reference to 99% of the other mechanics. Congratulations on a job very well done
@scottmarshall6766
@scottmarshall6766 Жыл бұрын
Been a service tech since the 70s - later an engineer, but once a troubleshooter, always a troubleshooter. I completely agree with your methods and philosophy. Nicely done!
@robertschagen9016
@robertschagen9016 3 күн бұрын
I was an auto electrician for 25 years, then IT for another 20 years. The methods have not changed, the technology has. I'm retired now due to ill health. Your work is great to watch. I shudder to think how much you must have spent on diagnosis tools. Keep up the good work 👍
@charlesvanhorn53
@charlesvanhorn53 8 сағат бұрын
Eric, I love watching your automotive repairs. In my opinion, you're just an automotive investigator who goes above and beyond. Keep up the good work.
@timsak
@timsak Жыл бұрын
Eric this is coming from an older guy, I want to let you know that you are an inspiration in both your professional life and your personal life! Thanks for the videos!
@anthonybrown2426
@anthonybrown2426 Жыл бұрын
I graduated from a vocational school in 86 automotive mechanics. After a year of light mechanical I ended up being a drivability technician which made me the electrical guy also. I went into another field but continued performing car repairs on the side and sometimes at work. Watching you troubleshoot this vehicle brought back memories. I still troubleshoot hard issues for friends of friend’s where multiple times or shops cannot find the issue. Depending upon what the problem is, sometimes I’ll go ahead and fix it or I just tell them what they need and show them how to do it themselves. I don’t charge unless it cost me and depends on who they are. Close friends only buy parts and if they are struggling with children and good people, I buy the parts and repair. You do a good job troubleshooting. One may take many different roads to get where they need to be so I never make unwelcome suggestions but do offer when solicited by those having trouble. I’ll be leaving for work and first thing is having to find an open neutral in a lighting circuit only affecting one fixture. I continued on replacing ballast and installing LED bulbs last night leaving that fixture out knowing what I needed to look for today. I do new installations of sometimes one of a kind equipment and add to other equipment which includes installation of breakers and relays in the control panels with running conduit and such. I returned to maintenance after working in management for 15 years up to being an area manager and plant manager. I went back to what I love with so much less stress and hours. I hope you enjoy doing what you’re doing as I do. I think you do😊
@user-dd3jm7qj2r
@user-dd3jm7qj2r 9 ай бұрын
Your statement at the end concerning your methods of troubleshooting to understand what is going on is dead on. You would make a fantastic instructor. Keep up the excellent work.
@dennisdesenberg7988
@dennisdesenberg7988 9 ай бұрын
Lots of us folks hold you at a very high level! From the 1st video I saw of yours and beyond, you have proven yourself to be one of the best automobile trouble shooters around. Dedication to your work is one of the things that makes you best. What others may say doesn’t bother me - please don’t let them bother you! Believe in yourself and let the nay-sayers fall to the side! Good Day - Sir
@gone4days956
@gone4days956 Жыл бұрын
As a long time viewer, I would love to see some of your customer reactions when you call them with good news or testimonials from real customers with their experiences at SMA
@kain0m
@kain0m Жыл бұрын
Truth be told, most customers wouldn't know the difference. Even if they saw the video of their vehicle's diagnose, they wouldn't know if it's good or bad...
@alhart6665
@alhart6665 Жыл бұрын
The modern shops and techs are all about get fixed and out the door not learning the diagnosing of the problem.
@gone4days956
@gone4days956 Жыл бұрын
For some of these customers, Eric O is their 3rd try to get it fixed when no one else can and Eric fixes it in 30 min so I would like to hear the that reaction.
@wyattfamily8997
@wyattfamily8997 Жыл бұрын
Exactly, customer comment would add "icing on the cake" to an already very interesting presentation.
@lopincol
@lopincol Жыл бұрын
I would also like customer testimonials
@Jw20000
@Jw20000 Жыл бұрын
I find it crazy the previous shop couldn't find it when they located the area where it was because she knew to bang on the fuse box! Thats a pretty good lead if you ask me.
@munter10
@munter10 3 күн бұрын
This was a learning experience for me, I’m an auto mechanic of 38 years and worked in dealerships for 24 of thos 38 years, I learned a lot more about electrics at a small country garage and a motorcycle shop working on quads than I did at dealerships. It was great watching your methodical approach to the problem, from the fault code identification thru to the solder repairs at the fuse box. Well done sir! I’ve subbed and I’ve learned! Thank you.
@theshowersinger6681
@theshowersinger6681 Жыл бұрын
The entire reason I started working on my own vehicles was encountering so many “just punch the fuse box” mechanics who took shortcuts to save hours of work or left parts and shields off. To this day, I’m still the type who will attempt medium to large jobs instead of going to a mechanic because I like things done right and put back without parts missing or broken.
@bauerjack1978
@bauerjack1978 Жыл бұрын
I agree better to spend the same money you would have at the dealer but spend the money on tools for the job at least you have tools for the next job
@julianlangdon3456
@julianlangdon3456 Жыл бұрын
me too, that and the cheap cars I run don't justify big Garage bills. If I'm doing a job for the first time, I'll often do a 'Dummy Run' at the Breakers on a scrap vehicle. Invaluable for identifying where difficulties might lay in getting it apart.
@dadssongssongs7726
@dadssongssongs7726 Жыл бұрын
I totally agree with your process of figuring out the issues, I believe it makes way more sense to make a definite determination of the actual issue instead of just half assing things like a lot of shop do. When I'm working on any vehicle I try to track down the absolute issue by ruling out things as I go until I find the actual issue. Keep doing what your doing so that you can help the rest of us with our diagnosis of issues we encounter. I initially found your channel by searching for an answer for why my 2010 dodge grand caravan was having the gauges, wipers and flashers turn on at random even while driving down the road, I found that one of the high speed wires in the driver's door boot was broken causing the issue, but had I not seen your video I would have spent a ton of time trying to figure out why it was acting up, so a huge thanks your way.
@commonsense2469
@commonsense2469 Жыл бұрын
Amazing! A mechanical that actually fixed something! Good work! I’m even more amazed that Kia could not figure this out.
@flinch622
@flinch622 Жыл бұрын
I don't know if dealerships read schematics anymore - DTC's have spoiled alot of people. I have a toyota, and dealership is 0-3 on electrical work... including overfusing a circuit that involved my air conditioning system.
@yamisniper
@yamisniper Жыл бұрын
more like chose not 2
@DougieLawson
@DougieLawson 3 күн бұрын
This video is the exact reason I've subscribed to you. I don't really do cars, I'm an old software geek. You approched the problem cold, no real clue what was happening and worked it. You tested everything needed from the 40A fuse to the relay board. You did that in turn and in sequence. Trace, test, note results, compare with the expected result. That is an ideal way to diagnose what was happening. Try a change, try the ignition. Rinse and repeat. I bow to your skills with the car's electrical circuits. I just hope I can do that same process with my software problems.
@marcopineda2249
@marcopineda2249 Жыл бұрын
As a technician, I worry I would fall into the category of failed attempts of diagnosing the problem. Learning from you helps tremendously and gives me more confidence that I can fix the problem when it comes to me. Sometimes you just need to step back and look at the big picture.
@mattfanslow
@mattfanslow Жыл бұрын
You'd be lying to yourself if you thought the best of the best of anything, really, but specific diagnosticians, got to where they are on a path of sequencial successes.
@infin1ty850
@infin1ty850 Жыл бұрын
Love that you show diagnostic and repair resources. One of those areas of vehicle repair that not a lot of people show. I work on IT and troubleshooting has always interested me more than the actual repair.
@jerrythefatcat2849
@jerrythefatcat2849 Жыл бұрын
Intermittent faults can be the worst. I really enjoyed watching this, superb fault diagnosis and explanation, thank you.
@marks93cobra
@marks93cobra Жыл бұрын
As a hobbyist/hot-rodder (i.e. non-professionally trained mechanic) I have learned a lot from watching you troubleshoot, so much so that I have started going through your videos now looking for other tips and tricks, thank you for putting out such great content!
@randyleiferman9411
@randyleiferman9411 9 ай бұрын
yes, i agree. great videos
@tonyaboud8953
@tonyaboud8953 Жыл бұрын
A real methodical common sense mechanic. Those circuit boards are "cold" soldered by machines and the soldered joints do fail. He is worth every penny for his time/expertise
@nicodenhaak3961
@nicodenhaak3961 Жыл бұрын
As a experienced audio tech with also 35 years of expertise in consumertech, i was so happy to see you take this (right), approach. Step by step narrowing things down while some piece of gear is acting up, is the only reliable way to track down a problem with resonably certainty you are down to root cause. you have inspired me in the past, to go the extra mile in my own diagnostics, as i was a bit set in my ways. when you said: around this solder joint i found a crack, i knew you found the problem sir! But you where right to get the lady piece of mind, and buy a new module. great job, as always ☺ best regards from the Netherlands, Nico den Haak.
@desertsoldier41
@desertsoldier41 Жыл бұрын
Yeah you never know if the new part might be updated with better Soldering or a better design. Can't blame the tech if its a new part, if it is a Board repair then you might not be eliminating the problem that caused the Solder to crack in the first place.
@banjo8879
@banjo8879 Жыл бұрын
I just recently found your channel and I'm glad I did. Your process of logically tracing circuits and troubleshooting steps is refreshing to see. I never like just throwing parts at a problem and you have given this old wrench turner new inspiration on how to go about tackling complex issues on these newer models. Thanks and keep up the great work.
@rogerb709
@rogerb709 Жыл бұрын
Great job, Eric! If you want it to stay fixed after you replace the module, you should also replace the cover.
@robinsonsmotorcycleandauto3929
@robinsonsmotorcycleandauto3929 Жыл бұрын
Ivan is gonna be so proud of you opening up that box and soldering it lol. Smart move getting the new box just in case something is wrong with that relay internally.
@tinkerscorner54
@tinkerscorner54 Жыл бұрын
A new unit will probably eventually have the same bad solder joint issue, at the same joints, especially if it was made in the same factory as the original. Re-using the re-flowed unit might have been the better, longer lasting choice, if it was done correctly (Suck out the old solder, clean the area, and re-solder.). Chrylser products also suffer from the same great "Workmanship Quality" issues as KIA, it seems.
@ericharrison619
@ericharrison619 Жыл бұрын
@@tinkerscorner54 Chrysler, especially in the mid-late 90s when everything went lead free solder.
@ufartface
@ufartface Жыл бұрын
ivan is a putin lover dont forget
@gtemnykh
@gtemnykh Жыл бұрын
@@ufartface don’t you have a BLM rally or something to go to?
@donaldspaulding5817
@donaldspaulding5817 Жыл бұрын
As usual, fantastic diagnosis and repair, I’m sure most wouldn’t go to trouble of soldering the board to confirm diagnosis before ordering new parts. You rock!
@INDENTUREDTRADER
@INDENTUREDTRADER 9 ай бұрын
Brilliant, my old son, I love watching these kind of videos.
@theoutsiders6811
@theoutsiders6811 Жыл бұрын
Same thing happened to me at Hyundai they couldn’t solve my engine problem. Christian brothers also could not solve it. I did research with awesome mechanics on KZfaq like this man and fixed it myself. We need more mechanics like you.
@marcgrobe8628
@marcgrobe8628 Жыл бұрын
Good job Eric! You stumbled across KIA Engineers field testing their new Anti-theft Device.
@vince9four
@vince9four Жыл бұрын
You and Wes are two of my favourite KZfaq auto repair channels. Both of you show your experience and knowledge when troubleshooting issues. It's amazing to watch, thanks for sharing!
@abdoalbasha4368
@abdoalbasha4368 Жыл бұрын
hallo can you give me the link of wes channel please
@Curlyim2
@Curlyim2 Жыл бұрын
@@abdoalbasha4368 Watch Wes Work
@michaelslee4336
@michaelslee4336 Жыл бұрын
Do yourself a favour and go watch diagnose Dan. He a Dutch version of Eric, of course it’s euro stuff but to me it doesn’t matter as it’s the problem I like not the particular manufacturer.
@abdoalbasha4368
@abdoalbasha4368 Жыл бұрын
@@michaelslee4336 thank you
@abdoalbasha4368
@abdoalbasha4368 Жыл бұрын
@@Curlyim2 thank you
@davidconley6267
@davidconley6267 Жыл бұрын
Good job, believe you got it. 22 years as an aviation electronics technician and can't tell you how many times a cold solder joint has been the problem, especially for intermittent problems. Reflowing solder fixes many issues.
@smitty2307
@smitty2307 9 ай бұрын
I’m putting my fist in the comment section here 😂 Mr. O, you have done the repair correctly, other would do it quickly. Top notch as always.
@svause
@svause Жыл бұрын
I'm an IT professional (and car enthusiast) - your messages are spot on: be methodical, avoid assumptions, gather (and keep track of) data, use reference materials, arrive at logical conclusions. Really important message you are sharing in each video - thank you!
@brianburns7211
@brianburns7211 Жыл бұрын
You’re spot on. Eric is very smart, and I’m not trying to diminish what he does. With that said, theoretically someone who has the service info, wiring diagrams, and uses a methodical and logical approach could fix this. Eric has all of these to use, and puts them all to use very effective use.
@JasPlun
@JasPlun Жыл бұрын
That is strange most dealers that run into a situation they cannot figure out they contact the manufacturer who then gets a specialist involved. If that does not work it heads up the chain of command. Nice to see Real Mechanics that diagnose a problem before replacing parts. Good Job!
@ian.lwilson7156
@ian.lwilson7156 Жыл бұрын
Brilliant. As an industrial electrician that was so good to see back to basics repair
@frankbiz
@frankbiz Жыл бұрын
You are absolutely an amazing technician. 👍🏻
@camjarman2641
@camjarman2641 Жыл бұрын
You hit the nail on the head when you saw "a ring of solder". This is known as a "dry joint". Seen this many times in electronic pcb's. Quick scrape, resolder with lots of flux, job done.
@DishNetworkDealerNEO
@DishNetworkDealerNEO Жыл бұрын
Dry solder joints tend to work at first, but as vibration and thermal expansion and contraction cycles happen, the circle widens and the joint becomes positionally intermittent, acting like a sore, loose tooth!
@keithlibner9259
@keithlibner9259 Жыл бұрын
Had an electronics shop in the 80s. You would not believe how many things I fixed by doing a good visual inspection. A magnifying glass and a bright light could often find minute cracks in solder or foil for a quick , easy and satisfying fix.
@markkrispin6944
@markkrispin6944 Жыл бұрын
Great to see Mrs. O hard at work.
@carl9976
@carl9976 Жыл бұрын
Always a pleasure watching you properly diagnose a problem. Keep up the good work. 👍🏻
@joev4853
@joev4853 10 ай бұрын
I always just love how happy, patient and calm you are going through your process.
@DIYDaveOK
@DIYDaveOK Жыл бұрын
Fantastic diagnosis as always, Eric. Solder traces/blobs are so often a miserably difficult failure point to diagnose. Thanks, Eric!
@mikerichardson7658
@mikerichardson7658 Жыл бұрын
Why can't everybody be like you when fixing stuff//You go way above and beyond..Your a good egg Mr.O
@bradkeller9440
@bradkeller9440 Жыл бұрын
Master diagnostician! These videos are so informative and entertaining and especially satisfyting when other shops could not diagnose the problem. Thank you!
@mdsims2107
@mdsims2107 Жыл бұрын
This is why I enjoy your channel, Mr. E. You start from one and move through the process. I truly enjoy learning from you and watching how you do what you do. Please continue to make videos, for as long as you enjoy it and I will continue to watch. Thank you. 👍🏾
@MrStatic101
@MrStatic101 Жыл бұрын
I’ve done energy management system/electrical troubleshooting for commercial buildings for years, digging through control panels and tracing out miles of wires. This was such a treat to watch you truly diagnose those circuits. No guesswork. Also even when you probably fixed it you still ordered the part to error on the side of caution. You sir are a fantastic technician.
@ag4allgood
@ag4allgood Жыл бұрын
Yeah , Eric probably fixed the problem by reflowing the solder to the pcb platethru connection. I have worked in electronics for 50 years & 7 years on a solder joint that is constantly subjected to vibration will make a once good joint go BAD. To the eye it might even look perfectly fine too ! Thing is to have access to the circuit diagram of the car. Once you have that research on the code also leads to the area of question. This lady sure was pissed enough to put her hand thru that fuse box ! Problem is there are many of these solder joints in cars today. Having a good solder iron is a must today. Great job of showing how to do an electrical repair.
@natehess7663
@natehess7663 Жыл бұрын
Having to track wires thru a building and find out where the failure is! That is always challenging , every job is different and there often is not a wire diagram present. As a Hvac/Refrigeration Tech we often have to do it, it can b very time consuming but very rewarding when you find the problem.
@webguy943
@webguy943 Жыл бұрын
Well of course its not his money ordering the part. The customer pays for it. Its up to the customer to decide whether she wants a new one or not.
@gjohnston7619
@gjohnston7619 Жыл бұрын
You are a one man fix it machine. I love the logic you use when you diagnose a problem. You are phenomenal.
@user-gv3co8cd2s
@user-gv3co8cd2s 4 ай бұрын
If I lived in your area I would bring my car to your shop because you are a good mechanic and a honest one.
@miguelparedes1888
@miguelparedes1888 Жыл бұрын
Nice work Eric, I love your thought process and you have help me to be more careful when I troubleshoot issues. Thank you very much !! As Ivan would say ( No parts Require)
@anthonyzhang4918
@anthonyzhang4918 Жыл бұрын
This is how problem diagnostics are meant to be done. Methodical, step by step, with proof for why something is causing a problem. Great Job! It’s disappointing that most shops don’t do any real diagnostics and are mostly just wrench monkeys. I hope to get myself a real scanner soon (instead of just an obdlink).
@mph5896
@mph5896 Жыл бұрын
Intermittents can be really tough to find. Eric O got it dead broken. Much easier to find an issue when its completely broke.
@86753091974
@86753091974 Жыл бұрын
The market dynamics have created this. Customers think that all you have to do is plug a magic tool into "the computer" and it tells you what's wrong and how to fix it. Unfortunately spending time to get to the actual problem pays very very little.
@ianide2480
@ianide2480 Жыл бұрын
Error codes, scans, probing voltages, and advice did me no good on my last diagnosis. I was told that my car did not have a fuel pump relay by an "expert." The exact statement was something like, "don't worry about relays, these don't use relays anymore, it has a module that controls the fuel pressure." It uses a PMW controlled control circuit to regulate the speed/pressure of the fuel pump, this module was located in the trunk and through the back seat. I used my oscilloscope to probe the output of the module to the fuel pump and the wire going back to the computer, tested the voltages and did everything I could to determine the point of failure. The error code was a missing acknowledgement from the module itself and low fuel pressure on both banks, plus random misfires. I haven't kept up well with technology in cars but I followed a plan that was as methodical as I could. To top it all off, this did not happen all the time and I couldn't easily reproduce the issue, the car would just suddenly die while going down the road. I tested every wire at the fuel pump control module and it all looked good WHEN I tested, every damn time. I do not have access to service data, being just a schmuck in his driveway, but it did occur to me to look at the service manual that came with the car. I read through the diagrams for the fuse blocks and saw (to my surprise) a fuel pump relay. At that moment it did occur to me that, of course it makes sense to use a relay to feed power to the fuel pump control module. I popped the hood and saw that the AC relay was exactly the same, swapped them, and went for a drive. After a while the AC stopped working but the car kept going just fine. Problem solved. Of course, I did mildly load the parts cannon. I purchased a a fuel pump control module for $75 (seemed cheap at the time) and a new fuel pump for like $150 (also wasn't to bad of a price). I am actually glad I got a new fuel pump, I was fixing someone else's work and the old fuel lines at the fuel pump were "fixed" with zip ties and duct tape (so I didn't feel to bad about fixing that up properly). All told, a $7.00 part would have got me going again with very little frustration. I'm not sure why the "expert" ford mechanic told me that they don't use relays on these? Moral of this story, do not assume and look at the simple shit first, which is what I usually do and I don't know why I bothered listening to anyone. (this is one of the many reasons why I have trust issues when it comes to mechanics) sure the pump isn't "controlled" by the relay, but it sure is powered by one. Unfortunately I have far to many bad stories when it comes to paying for my cars to get fixed, so I just muddle through it the best that I can.
@86753091974
@86753091974 Жыл бұрын
@@ianide2480 glad you fixed it but this illustrates my point. If you were a professional tech working on this car you would have billed an hour to do 2 3 4 days of work. Most techs are paid by the job. The economics of that don't make sense. Would you be willing to be paid an hour to do an unknowing amount of work that may take your entire week (intermittents are extremely common). 95% of the general public thinks that your problem could have been solved by a tech plugging a scan tool into the car and therfore are unwilling to pay for "daignostics". What's the answer? I don't know but it will get more and more expensive to fix these types of problems as techs are leaving the industry in droves.
@mph5896
@mph5896 Жыл бұрын
@@86753091974 Shops are charging MUCH more than 1 hour for diagnostics if they need the time. For example, buddy had a landscape truck that would not start at a repair shop for diagnostics. They ran the bill up to $1500 and still did not have the problem locked in. They called him and said, do you want to proceed more.
@dustcommander100
@dustcommander100 Жыл бұрын
It's quite frustrating to work in an environment where wiggling something to get it going was the norm, especially when getting to the real issue involves a lot of red tape. This is one reason I'm retired now! Eric is putting a lot of effort into identifying the real issue - something to be greatly admired!
@FlyingAroundOz
@FlyingAroundOz Жыл бұрын
Your troubleshooting skills and techniques are spot on. You were very thorough and assumed nothing. The diagrams took you to the general area, and your patience and curiosity led you to the fault. Well done!
@buffalobueller4433
@buffalobueller4433 Жыл бұрын
your troubleshooting skills are excellent - do NOT abandon the method you use! (I would bet you found and repaired a cold solder joint on that daughter board and it is as good or better than the $78 replacement you ordered... but better safe than sorry)
@davetaulker6721
@davetaulker6721 Жыл бұрын
As a Mechanic/ Fixer of Broken Things, I truly appreciate and enjoy watching you work through your process, and help to explain your methodology on each of these repairs Eric. I wish that I lived closer, so that I could come share a bay with you and learn from you my friend. Have a great day brother, and I wish all the best to you and your family. Please keep up all of the fantastic content.
@jimbark4642
@jimbark4642 Жыл бұрын
Right, This guy seems hella cool to work/learn with.
@jackson1az449
@jackson1az449 Жыл бұрын
I’m a marine tech and I love it when people actually take the time to diagnose problems properly good job bro👍🏻
@williamwever4489
@williamwever4489 Жыл бұрын
An Air Base I was stationed had an auto repair shop operated by a Tech Sargent. An airman reassigned from Germany had a Opal auto with him This was the early 1960s. It quit running and got towed to the shop. The diagnosis was carb problem...The car owner was told getting parts would be several months from Germany. The Sargent rebuilt the carb using American parts and when the piece from Germany arrived he put it on. The car ran better with the jury-rigged carb so the ordered part went back. That shop probably got a lot of young airmen interested in Mechanics as an occupation using a GI loan.
@JohnRodriguesPhotographer
@JohnRodriguesPhotographer Жыл бұрын
He often comments his videos are basic and nothing exciting. In reality he doesn't just show us how to fix something. He shows the world how to properly diagnose and troubleshoot, not just the physical task but the mental breakdown of what he is doing. Troubleshooting in my old since retired field, IT, was incredibly important. I remember a time when the mainframe kept crashing as soon as we brought it up after the last crash. I personally wrote the procedure to document a system crash. And I was following that procedure when the vice president came storming in and screaming at me. It was about that time that I found the problem. We essentially had a hard drive with an error on it. Either a head touch or something happened but the drive was no longer good. And that's when I pointed to it walked away from him and made a phone call to our engineers who were at lunch to tell them we were down and needed them ASAP. I also told him exactly what the problem was. They came in looked at what I had circled on the printout, walked over to the cabinet and swapped out the drive. While they were doing that I was getting ready to reload the system. Troubleshooting is such a lost skill. And by that I mean most people that go through the tech schools and get certified for computers in general aren't taught how to troubleshoot. Basically it breaks you call Mama. I remember the first time I watch this video the first thing I noticed was I didn't hear anything turning on when he turned the key. One of the things I can normally hear on his videos is the relays clicking and sometimes I can hear the fuel pump too. It's kind of surprising given the noise level I worked in for 30 years. I didn't hear any realize clicking or fuel pumps running nothing.
@villedocvalle
@villedocvalle Жыл бұрын
@@JohnRodriguesPhotographer I was hopi g you were going to quit that job.
@JohnRodriguesPhotographer
@JohnRodriguesPhotographer Жыл бұрын
@@villedocvalle Thanks, I did years ago. They started as a small company, and grew very fast. Their management style didn't mature with the growth. Best practices was to run around with their hair on fire, putting it out with a hammer. No analysis, just yell at whoever they decided to blame. I out grew that. I learned people rarely actually make mistakes. More often than not is was a lack of or a break down in training. I am medically retired now, 30 years of IT and three years as a 24X7 final care giver for my parents took its toll.
@SpaceCadet4Jesus
@SpaceCadet4Jesus Жыл бұрын
@@JohnRodriguesPhotographer Agreed. Been an IT troubleshooter for over 35 years and I find that is a skill you can't really teach in school. The bulk of troubleshooting is a mind set that watches, listens, reasons and remembers, not spout book knowledge. Some of it is knowledge, intuition and luck all wrapped up in that small space between our ears. South Main Auto is a troubleshooter.
@beaviswashere8009
@beaviswashere8009 Жыл бұрын
I must say, I have learned to resist touching too soon by watching you! The fist worked for awhile, but gives no answers. When you narrowed it down to barely pressing with a probe, you have a very focused point of "interest" ! I will say again, I love your diagnostic videos! Thank you!
@wildbilldoughty6572
@wildbilldoughty6572 Жыл бұрын
I love watching your process. Great job.
@drood78
@drood78 10 ай бұрын
Absolutely my kind of technician. it's funny to fix a car the dealer couldn't fix. they use a scanner and if that doesn't solve it they're stuck. subbed!
@rhkips
@rhkips Жыл бұрын
I love when the diagnosis includes muffins! If I ever have the opportunity to write a factory flowchart, I will absolutely have one of the steps be "Take a break, have a muffin." $78? Sold! 100% on board with you there, Eric!
@alexmateo2662
@alexmateo2662 Жыл бұрын
As always great video diagnosing the issue that even The Kia dealer and other shop could not figured out . It is just basic troubleshooting 101. Great Job!
@robertpage2023
@robertpage2023 Жыл бұрын
Yes, he should make KIA a mechanic's "How to diagnose and repair this problem" video and additional page to the KIA repair manual. AND, they should pay him for it!!!!!!!!!!!!!!
@billydixon3990
@billydixon3990 Жыл бұрын
Your diagnosis approach is always logical and make sense, I agree with you About learning What causes the problem and not moving a lot of parts around in the beginning of the diagnosis
@johnmarkferding8943
@johnmarkferding8943 Жыл бұрын
Eric, as usual another a great diag video. As a master tech and previous tech for Hyundai I can tell you that we have replaced many of those main relay control boxes in the past. Great find, Great Video. Good to see that someone else likes to get to the heart of the issue and not just replace parts because of codes.
@jeffchimileski6283
@jeffchimileski6283 Жыл бұрын
Bravo! Your re-solder touch-up could potentially be more reliable than repacemet module since the new one may have same problem as the original.
@richardwhalen732
@richardwhalen732 Жыл бұрын
I love to follow your process to gain data on a particular problem. I don't have the expensive scanners and other heavy diagnostic pararphernalia that you pros have. I do have a test lamp and an inexpensive scanner that allows me to grab codes and show some minimal events in real time. Your videos have saved me much money and hours of chasing rabbits by teaching me to slow down and study the problem and not loading up the parts cannon.
@Moses55845
@Moses55845 Жыл бұрын
As always your knowledge, experience and resilience paid off. Thank you
@larrycollar1322
@larrycollar1322 8 ай бұрын
Your diagnostic videos are a treat. Thanks for posting them.
@robertgrimley9077
@robertgrimley9077 Жыл бұрын
Back when I was throwing wrenches this type of problem is the ones I loved dealing with. A real head scratcher that needed in depth thinking. Electrical troubles were always sent my way because I loved them. I really appreciate your videos on these odd vehicle problems and repairs, brings me back to my prime.
@Starchface
@Starchface Жыл бұрын
It's always interesting to me how many people are afraid of electrical work (low-voltage kind of stuff, to be sure). I guess I would put that down to a lack of knowledge. Clearly, to work professionally on modern autos, one cannot get far without at least basic electrical knowledge and diagnostic techniques. It's not that hard. Maybe a week's training should get a guy going (or a girl-I haven't seen any but there must be one somewhere). I also enjoy electrical work. Provided such a repair is electrically correct, it doesn't really matter what it looks like, and you don't usually get super dirty.
@AN-kg4ei
@AN-kg4ei Жыл бұрын
Reminds me of all the older Hondas with bad fuel pump relays. You could always just wait till summer when the solder expands... Nicely done as always!
@terryhoffman2760
@terryhoffman2760 Жыл бұрын
I like how you diagnose and think. Good work.
@murrayashworth78
@murrayashworth78 Жыл бұрын
Excellent work! Experience dominates, a value that can’t be easy taught only years of trial and error.👌 🇳🇿🇨🇦
When You Just Want To Go Back Home....
26:17
South Main Auto LLC
Рет қаралды 387 М.
Каха инструкция по шашлыку
01:00
К-Media
Рет қаралды 3,2 МЛН
Sprinting with More and More Money
00:29
MrBeast
Рет қаралды 147 МЛН
Make me the happiest man on earth... 🎁🥹
00:34
A4
Рет қаралды 7 МЛН
КАРМАНЧИК 2 СЕЗОН 5 СЕРИЯ
27:21
Inter Production
Рет қаралды 603 М.
감독들의 리액션 맛집 모음집 ㅋㅋㅋㅋ 🤣
0:40
사커바이브 SoccerVibe
Рет қаралды 6 М.
Are These Cars DISPOSABLE? (Hyundai/Kia GDI Burning OIL - MISFIRE, Low Power)
22:48
Pine Hollow Auto Diagnostics
Рет қаралды 86 М.
GM Dealer Made Huge Mistake! $500 Diagnosis & $3900 In Repairs!
39:26
South Main Auto LLC
Рет қаралды 2,1 МЛН
Customer Says He Can't Get The Rotor Off!
13:51
South Main Auto LLC
Рет қаралды 1 МЛН
Customer Spent $1000's And Still No 4WD
37:28
South Main Auto LLC
Рет қаралды 1,2 МЛН
Why do Toyota engines consume oil ? And how to prevent it?
24:32
The Car Care Nut
Рет қаралды 1,8 МЛН
GM Nylon Injection U-Joint Replacement
21:27
South Main Auto LLC
Рет қаралды 196 М.
Choose the motorcycle for you 🏍️
0:12
MEDELIN
Рет қаралды 5 МЛН
Запчасти под замену?
0:14
УРОВЕНЬ
Рет қаралды 9 МЛН
Лучшая дорога от КазАвтоЖол 🤦
0:35
Slugi Naroda
Рет қаралды 3,4 МЛН