I followed the link and bought the best ones. Never seen them before good find.

I thought this was going to be a dry video. However I was anchored to it. You nailed it without screwing it up. 👊😎👍

Good video. The metal hollow wall anchors that you hammered in and they destroyed the back side, I agree that's terrible but I've had great results with them holding tremendous loads if a hole is drilled for them instead of hammering them in.

The Pop-Toggle comes with a small prod designed to engage the retention mechanism. After inserting the toggle you push the prod through the hole to 'pop' the wings out. THEN you can drive a screw. The instructions are printed right there on the package. It's amazing how many reviewers on KZfaq miss this.

Great Video. Thanks ! Just got a Claw Drywall picture hangers last week, and have not tested it yet, and just glad that I watched your video today, you have been very helpful

Interesting vid...but opinion based on fastener installation ease & damage upon removal. The purpose of these drywall fasteners is to mount items on the wall w/o the use of the studs. You should consider a follow up vid testing their lateral (and vertical) strength which is what their intended purpose.

In your intro you had a flip toggle but didn’t show them. I use them all the time as an AV installer when a TV bracket can only hit one stud. They hold more weight than anything, but require a large hole 1/2”. You can also use them on block or steel studs.

Will any of these anchors support Vince? 😂

I only use the metal ez anchors. Those plastic ones are far too easy to strip. The metal ones can also go into studs.

I'm pretty sure you installed that first Ook device plate upside down. The plate should be flush against the drywall and works as a stabilizing bracket to the hook. If installed correctly, this one will definitely support more weight than any of the others, so you have to consider what you are trying to hang in determining which fastener is the best option. I wouldn't use it to hang a simple picture frame, but for a large decorative mirror or shadow box this would be a go to device.

For the most part on home Depot anchors I have been using the yellow wallclaw... That was really interesting seeing how it performs on the backside of the sheetrock

Superb holding power, no tools needed to use and virtually no hole if you remove it... HANDS DOWN THE MONKEY HOOK IS THE SUPERIOR SHEETROCK ANCHOR

Definitely a good video. I had to remind myself that this channel primarily does tool, hardware and power equipment reviews. The reason I say that, is because I found myself really hoping that you would hang a luggage scale or some plate weights from each one after install to see how it performed. All that said, I still did smeeEessh that like button!!

The cobra Triplegrip are fine as long as you are not overloading them

I've used most of these anchors over the years, never had any issues. Just use the right one for your needs.

You probably already know this but Makita came out with NEW lawn equipment. A mower, a blower, and a string trimmer. The battery lasts 2 days on the mower. 36volts but here's the catch: You can't use two 18v batteries, you power all 3 with the back pack battery. Watch me forget I was hooked up to the lawn mower when I walk away. Pricey inconvenience, I calls it.

😂 This video helped me a lot as I stood so confused staring at a wall of hooks at pini ace. This video also made me laugh a lot.😂 Good job and keep it up!

Great video, it helped me just buy the 3M Claw anchors. Thank you for taking the time to test them all and save us all the guess work!

I've used most of those before. Not a fan of any of those plastic-bit ones. The Oof with the two push pins are wonderful for me. My wife changes her mind about 80 times when hanging stuff on the wall. Those make my patch work almost too easy. That said, hellllooooo monkey hooks. I have a sculptor buddy who makes stuff with big-ass nails. It is heavy. I have a 3m claw holding that up. Before I found those I had to run a wire between two studs. 99/100 the misses choice to hang things is never on a stud. Most of those can handle little things, but if need something with strength, don't cheap out. It makes a difference.

Master of the video universe! Did an entire Home Depot section in 10 min. Hats off to you kind sir.

Good video but….I’ll wait to see what Mathais “makes” b4 rushing out to buy these store bought ones…🤪

This is a great idea for a video but to be really helpful you would somehow test them for pullout strength or how much weight they would hold

I was not aware of the Wall claw. I think that is my new favorite because of strength. Maybe the Cobra. A long time ago we used the Molly anchors which were like the Everbuilt and they were great. The difference is that you have to pre-drill them in not hammer them. I think if you pre-drill the Everbuilt you would not blow out the paper at the back. Then they might be great. I hate the wing nut or butterfly bolt type. Although they are very strong because you spread the wight out on the largest surface area. You have to put whatever your mounting on the bolt before you insert the butterfly into the pre-drilled hole. Mostly I use the metal conical self drill in with a screw gun. Fastest and 50 lbs holding power. Here is a tip. Pre-run a drywall screw of at least 1-1/4" into the drywall to make sure you don't hit a stud or metal. That way you don't get a blowout.

Yeah, in today's world, nails in drywall=crap. 🤣💯

I think you did the Pop Anchor a disservice……it holds the rated loads very capably. You asked how to remove? All packs come with the yellow pop tool that collapses the Pop Anchor. Now you can remove without tearing up the drywall.

That driller toggle looks pretty sweet. I carry a lot of toggle bolts and the white screw in anchors in my bins. I remember back in the day when toggle bolts sucked ballz and had a flat head slot only. You would always stab the he'll out of your finger with the driver bit trying to get the freaking thing to screw in the wall.

I have a 66" heavy mirror held up with the ook ones with all the nails. You didn't exactly install that one correctly. The slot in the plate goes right where the anchor comes out of the wall. The plate sorta sits behind the hook. The nails although they can be pulled out fairly easy they do actually work very well. I'm gonna give your Amazon ones a try for some smaller pictures. And the anchor that squeeze the center together like a cross actually work very well if a hole is drilled for them vs. pounding them through. That ook wire one is a unique one that looks good to try

Good vid. It's interesting to see the back of the drywall and just how damaging some of those anchors can be. 😬 Oh, and I see that DeWalt PowerStack battery trying to be all nass and inconspicuous like on the end of that new driver. 🤩 👍

Lol I thought those spot markers for the 3M claws were stupid too (not sure if you were being sarcastic or not lol) then I actually used it on the back of a painting that needed two hooks. Before you had to find out where to center it then recheck the measure. Instead you put the marker on the back of the paintings 2 sawtooth hangers take off the adhesive then place it where you want it on the wall. The marker stays on the wall you draw a little dot then line up the hook and press in. Then hang the picture. Done... so much freaking easier!!

Real nice like Clint, I use the metal Z anchor at work for pictures and a toggle through metal studs (over kill) for heavier items. I got the new anchors you like “Real nice like “ thanks for another great video.

I use the WallClaw, the bright green one. It’s not cheap, but it’s easy to use and most importantly Made in in the U.S.A.

Thank you. Fast, information, entertaining!

You installed the WallClaw upside down :)

That claw one looks kinda cool.

Great video Clint. Much better than what that weirdo from Philly would do! LoL 😂

Man installs things incorrectly and then calls them crap when they don’t work as advertised 😂

Thanks Clint really looking forward to watching this video right now. I know project farm did a video on drywall anchors and of course he is very thorough but his video included all types of brands and you are limiting it it looks like to home Depot and that's awesome because that's where I shop I'm not ordering anchors from Amazon and eBay, so this video will hopefully eliminate all the BS brands from Amazon and focus solely on what I will see on those raxit HD so I know exactly what to look for next time 💥💯

I've got a towel rack and a 85" LED TV I'm hanging today, and I'm going to use the 3M claw hook that rated well in this video. I'll let you know how it works out. Thanks

Because you don’t need me, you just keep me hanging on!! Now I got that song by Kim wilde stuck in my head thanks lol

Your new favorite is also MY new favorite AND...I'm one of those folks that helped Amazon sell out of em. :) I ordered them after your previous video about them. Thanks for the comparisons. It just proves that our new favorite is deserving of it's prestigious place on the list. LOL

Thank you very useful information.

Which one is good depends on what you want to do. Many of those were for hanging a picture rather than securing a towel bar.

Based on my personal experience of 50 + years, I am hooked on the ook Easiest to install, no damage to wall, NO Sheetrock dust, nuff said.

The one I prefer the most is wingit. I have mounted tv brackets on walls, mounted safety grab bars in tile showers. They have like 300 lbs weight capacity.

Love your style man very informative, this is a must watch vid fir all homeowners.

Very good demonstration, keep up the great work 👍.

Quality content. Here for this.

Wow. Interesting vid. Entertaining too! Didn't know there were so many types of anchors. I'm looking for one for shelving. You saved me money and time. Thanks a bunch!

Great review! One that you don't show, "Snap Toggles," is a safer alternative for molly bolts, because you can make the spreading back part be vertical which is much stronger than the random position of the spreading part of the mollybolt.

Amazon's got em.

Felt like a proud parent when "ook" finally prevailed!! Way to go OOK!!! HAHAHAHAH Video was real Nass like!!!

Fixing to plasterboard sucks. However toggle bolts have been holding up a 55" TV but the frame took 6 heavy duty bolts.

I’m a huge fan of the wall claws. Those babies are the only thing strong enough to hold my toilet paper roll holder to the wall. Things get pretty intense in there so I needed something that can handle some abuse

The blue toggler box is what I fond is the best

Thanks for testing for us

Super about the wallclaws, they’re awesome

I was looking for the original vid where you showed your favorite anchor and came across this one. Cant believe i missed this one. I use those zip-its/EZ anchor. I never used the metal ones, id like those ones if using the screws they come with, but i like the plastic ones because i can use pretty much any screw for them since they're plastic and can use a variety of dif screws since they will cut their own threads. Those cobra ones are pretty cool too tho. Id use those. I like the ones you say are your favorite, i just wish they were sold at home depot, lowes, or somewhere local.

The 3m claw are pretty good for small items

I’ve installed the no-drill anchors all over my house and I love them

The Claw is the winner for me. I hung a beautiful picture of Steel Panther from M3 on the wall and the Claw worked very well!

The Everbuilt and like said brand are great for campers and Rv's. Drill a pilot hole for them don't just hammer them in the paneling or your going to have a large repair to fix. Great video, love the humor.

When I am mounting something really heavy, I have never gone wrong with the trusty toggle bolts.

I bought the gold ones from Amazon after your first video. So far i like them

The third anchor. The screw that came with it Not Philips. It’s pozidrive. You can tell because it has little dash marks diagonally to the cross pattern

Hey the first video link still give you available anchors on the #1 favorite

Good thorough video Clint @ToolReviewZone

i have tried a lot of these. I currently use e z lock anchors but I am very interested in your top picks because there are real nass like.

Great consumer testing, thanks.

Subscribed for the comedy alone, you my friend are hilarious and entertaining! 😂

Cobra and claw look like the best ones . I have used the first one you featured . To hang vanity mirrors . There not the best but they do work ok.

I like the Everbuilt design. Been using them over 40 yrs. Way back when you could buy a box of 50, now only 3-5 per packet. Anyway, you have to drill a hole to properly install these. At least those were the instruction in the past.

I bought the ones you think are the best and I love them too. Just drive with a hammer and easily removable. However, when I ordered them they were out of stock and took almost a month to get. Aside from the delivery time I also think they are the best.

Thank you! I like toggle bolts or driller toggle for shelves, the 3M claw, and the monkey Ook. If I had drywall then I would try your favorite but I mostly have lath and plaster walls, so I could imagine that splintering the horizontal lath boards, :( . PS - The first Ook installation with the "medallion" does not look like the installation picture. The medallion needs to be up higher. That said, the nails will still slip out just like you said, so it is still a dog.

I used the white drywall anchors that you screw in, had a plastic dog kennel come crashing down. The kennel weighs about 40 lbs and there was a couple sleeping bags, a spare wheel and tire to a bicycle and a couple other small items in it, I'm sure it didn't weigh much over 100 lbs! Thankfully no one was home but I was shocked and disappointed!!!

That last one, the cobra 90 pound toggle, just note that if there is fiberglass insulation inside the wall, it can totally screw it up.

i mainly use stuff like that at work. i use metal zip-it and those zip toggles. i only use those plastic gray anchors for block, they are junk in drywall. sometimes i use tapcons. you forgot to show those grabber screws, they are for drywall, sometimes called wallhogs. they look like a very coarse treaded drywall screw

This is an excellent video! I think this one will end up being the gift that keeps on giving for TRZ! Good job Clint!

installed the 200 lb incorrectly, the metal is supposed to go flush against the wall not at the bottom of the J made by the hook but where it comes out of the dry wall.

At Home Depot here in Canada, I found ones called DuoPower that are awesome! Otherwise, I'd love to find and try your #1 choice.

I like the last one you put in and I have use the ones that you can hardly find in the stores for quite a while now

Only seen some of the them and used them toggles you still got to drill a hole but they hold a lot of wait I used on to fix a shower curtain rod for family with 10 piece of plexiglass I cut came out well still holding perfect but it's good to know there's other options that you Clint for this information

Uh, the plate on the OOK looks as if it's installed incorrectly. You have it hanging from the hook instead of flush against the wall at the point of entry.

I use the extra anchors for most things including hanging bathroom accessories. A #3 bit on the gun is the best way to install them. I've used toggle bolts for microwaves and smaller cabinets where only 1 stud is available to fasten to the wall. The larger toggle with the zip tie thing you didn't show using has ratings up to 150lbs. and is nice using 6 of those on grab bars in showers if blocking isn't available. All in all everything has a different purpose. I'm not a picture hanger so not sure on those smaller ones.

Everbuilt anchors can also be installed with a drill bit

Grip it fasteners made in England are fantastic

Monkey hooks work Nice Like until ya push it into an insulated wall, especially with blown in insulation.

Great video. Very informative and helpful...

Really like your videos. However the ook drywall hanger with the metal plate you installed incorrectly and is extremely strong when installed correctly. I’ve used them many times when I had to hang giant painting or even some mirrors

Over the years I have used many different types of anchor systems. I like the Toggle Bolts, you can get big ones that will hold a lot of weight. But you have to drill a hole and you can't use them for every type of application. Those bright green anchors I have been using for years. They are easy and will hold 35 pounds. Most family pictures you mount won't exceed that. If I'm hanging something heavy, I make sure that I mount the item in a spot where I can use existing wall studs. Once again, if it's heavy, I have mounted a board/cleat across the wall screwed/lag bolted into the studding and used that board to screw hanger hardware into. Just don't use those little plastic anchors, they tend to give you, in a plastic baggie, with some items you buy that have to be hung. They don't hold up anything. Whether it be a wall clock, kitchen knife rack, furnace thermostat, hat/coat hooks, etc. Use at the very least those plastic screw in type anchors. They are okay for some things at least. Good video, demonstrating the available choices you can use to hang around with.

How much do these fasteners cost

Extremely scientific test

I like the claw but I buy the pack of 3 cause just one M3 cost $5 but the 3 pack cost $11. So you are saving a lil bit of money and they are reusable and made out of quality metal so it's going to last. Awesome video!

You are friggin hilarious!

You didn't comment on the last one you used....the Cobra. That one looked really naassss for hanging heavy objects.

since you last anchor video Swpeet is now my favorite but i normally use the first one and last one the cobra

Great video, VERY informative.

Nice. I've never seen those ones from Amazon, either. I'm thinking about getting some, since they're available right now.

soooo, I guess this is testing the hole they leave more than actual holding capacity, as it's actually never tested how much weight any of these can take.

The metal ez anchors strip out pretty often not gonna lie

Got them me anchors you like Clint, hung about fitty pictures and mirrors in record time, so far so good. Thanks Brother😎🛠️😎🛠️😎