This could be the best picture hanging system ever! 3M Claw

Рет қаралды 194,858

Жыл бұрын

After many years of putting up fixings for pictures and prints around the home I think I've found the easiest, quickest and most secure hanging system ever! The 3M Claw.
🧰 The tools and equipment I use: www.amazon.co.uk/shop/properdiy
Proper DIY Patreon Page: / properdiy
Amazon links to the products in this video...
UK Links:
► 3M Claw 7kg Hook: amzn.to/3pJ2HvG
► 3M Claw 11kg Hook: amzn.to/3XKYeWb
► 3M Claw 20kg Hook: amzn.to/3D1iNEd
► 3M Claw 30kg Hook: amzn.to/3O4wKau
US Links:
► 3M Claw 15lb Hook: amzn.to/46xNBK6
► 3M Claw 25lb Hook: amzn.to/3D3u9r1
► 3M Claw 45lb Hook: amzn.to/44t8GDW
► 3M Claw 65lb Hook: amzn.to/44y4nXN
The Amazon links above are affiliate links. It doesn't cost you anything to click on them but I do earn a small commission if you do. As an Amazon Associate I earn from qualifying purchases.

Пікірлер: 230

@twincamtim Жыл бұрын

It's probably already been said but worth repeating. You are producing videos which are interesting, entertaining, informative, funny, varied and professional. But most of all they are highly enjoyable, without the often boring, monotonous voiceover or lack of detail. The editing is not intrusive and so well done it is usually virtually invisible. Lastly, I absolutely love your relaxed approach to everything, which comes across as if you are talking to one of your friends. I can't get enough of them and always look forward to the next one! Thank you.

@MikeSmith-sg9pt Жыл бұрын

15 minutes on such a simple product, but I didn't lose interest once.

@emielhoffer Жыл бұрын

Amen

@danieldavidmccabe Жыл бұрын

Agree - the overall style is great and keeps you interested without being obnoxious like some other DIY channels suffer from.

@joekagerer Жыл бұрын

No need to buy an expensive flat screen TV mount!!! 😂😂😂 I have an observation from all the way over across the pond in California. You mentioned heavy plaster over the drywall. I would that would make these hangers more effective. Even several coats of paint may improve the density of the wallboard which is actually what failed. Your tests were already so high above the limit that it doesn't matter though.

@jules.marshall Жыл бұрын

The mirror which I should have hung 6 years ago is now on the wall thanks to this video. Thank you.

@tureq85 Жыл бұрын

Stuart would make watching paint dry interesting. I am addicted to your videos and you're not late to the party, I didn't know these existed!

@dereklewinson3018 3 ай бұрын

Thx so much for this video! Yesterday, after watching this video, I mounted a 36"×24" magnetic whiteboard in my office using a couple of 11kg (25lbs) 3M claws for the first time, plus a spirit level. Easiest mounting job ever! I even removed and repositioned the board higher. Again, EASY! Cheers!

@paulleggett9735 Жыл бұрын

Fair play to the unsung hero in this video....the Sainsbury's bag.

@John01GM40 Жыл бұрын

the most impressive thing in this video is the fact a sainsburys shopping bag can take such weight without the handles failing. As for the picture hook, obvious from the word go that the weak point is the plasterboard, not the hook. Those narrow hooks under a downforce are acting like knife blades cutting their way down. They may be easy to insert but I would not use them - then again I've always been sceptical about fixings that are stronger than the plasterboard in terms of the extra damage that will occur when they fail.

@astronemir Ай бұрын

The damage here looks way less than a regular drill in wall hook

@richardphillips3303 Жыл бұрын

I've seen these advertised, but your impartial tests show that they are pretty awesome 😊. Thank you Stuart for sharing!

@Quaker521 Жыл бұрын

As with most of the best things in life this is such a simple idea (wish I'd thought of it) but for its simplicity it works beautifully. Thanks for bringing this to our attention and I'm sure that 3M's sales are about to go up. I know that I'll be buying some. Cheers.

@mickeyfilmer5551 Жыл бұрын

I am looking at a clock I bought a few years ago, that I deemed too heavy for my wall- it's 7kg so you've just solved that problem for me. Thanks again for enlightening me.

@2098elk 8 ай бұрын

What a wonderful product! Just finished hanging a small grandfather clock, Solved a problem with toggle bolts.

@bscott77 Жыл бұрын

Great little products. If it says 3M on it then I tend to buy it. Is an incredibly trusted brand

@SmallWorldFilms 9 ай бұрын

Thank you! Having watched this, I overcame my anxiety and installed one of these claws. I did need to persuade it to go with with a hammer, but it went in without incident.

@anneaires3984 6 ай бұрын

I just ordered the 65 lb one for hanging a heavy vintage vanity mirror. Your video is super helpful! Many thanks from across the pond! 😀🇺🇸

@lovelyyy7573 2 ай бұрын

How much does your mirror weigh? I want to hang a 35 lb full length mirror and am wondering if the 65lb ones will work or if I should get wall anchors

@anneaires3984 2 ай бұрын

@@lovelyyy7573 Good morning! My mirror weighs about 30 lbs. I've yet to hang it though because honestly, I chickened out. I began the project but decided not to because I felt wall anchors would be a better choice and the mirror belonged to my beloved mom & dad and it's very special to me so I chose the old but reliable method. Hope this helps!🌞

@lovelyyy7573 2 ай бұрын

@@anneaires3984 good advice! I will stick to the old method too. Thank you for your help 😊 💕. Have a blessed day

@anneaires3984 2 ай бұрын

@@lovelyyy7573 Best wishes and you have a lovely blessed day as well friend! ❤️🙏🏼🕊️

@paulinedavis8734 11 ай бұрын

THANKS...moved during COVID & haven’t hung a thing on my walls yet... 3M The Claw just made that thing on my TO DO LIST... a lot SIMPLER !!

@faithingrits Жыл бұрын

Wow! Thank you for this share! I've got an upcoming craft room project this year and this is super useful. I've not seen these yet in the UK (but not recently looked either). I'll be checking in my local spots for these. I've got a mix of plasterboard stud walls and plasterboard over stone walls. I like to have a "working wall" in front of my craft space for tools; much like in my she-shed workshop with a wall of tools behind my workbench. Like you said, I've had enough of the command adhesive things! I've gone a mix of hooks/pegs/magnetic/cleat in my outdoor workshop. My indoor craft 'tool wall' needs a different kind of thinking and planning. So, Diolch yn Fawr for sharing this tip! My creative thinking is away now with ideas 🤓

@nicolass2262 Жыл бұрын

What an amazing timing for me to find this video I have like 10 frames to hang this week. Already order some. Great content thanks for the video.

@ajmilagros 7 ай бұрын

It’s amazing how I was just looking at these hooks yesterday, deciding whether or not they would suit my needs and then boom your video comes up with all the evidence I need. I guess I might be going back to the store to buy. 😂 thanks

@AndrewLumsden Жыл бұрын

I've only got solid walls but these look very useful. You could put a couple side by side a few inches apart for heavier loads. I have a very large and heavy mirror that is hung on two double pin X hooks. These appear to be the modern equivalent.

@bailgatemethodistchurch9002 Жыл бұрын

Brilliant videos, thank you. Easy to follow, entertaining and informative. Please keep going!

@daveknibbs4046 Жыл бұрын

Brilliant test for these remarkable fixings. Definitely worth trying for future pictures etc Great content as always 👍👍

@outoftheburrough Жыл бұрын

I'm impressed by the strength of the string & the bag 😂

@keithg1xfl Жыл бұрын

If you've got a Painting weighing 40+ Kg, then I would say you DON'T have plasterboard on your Walls in your Stately Home

@jimleishman4652 Жыл бұрын

Very impressive, and minimal damage to the plasterboard after failing. I'll be getting some of them fittings

@sih4143 Жыл бұрын

My preference is the Takker pins, same design of the downward force rating, but they come as just the pin first then you can add on a couple of different types hooks if wish to. So on the wall they have a much smaller profile. But I use them without the hook and they hold pictures (glass clip frames and large framed canvas).

@markpeam8549 Жыл бұрын

Perfect timing - I've got a 1m x 2m painting to put up and wasn't looking forward to using rawlplug(s). I'll give these a go, probably the larger one "just in case". Thanks.

@6panel300 8 ай бұрын

It just goes to show how we over engineer things. A simple no fuss solution like these are great. I will certainly be buying some. Another great video Stuart.

@waynebelfast 6 ай бұрын

These look amazing. I've been putting off hanging some pictures because I'm terrible at DIY, but these are definitely getting purchased.

@andyc972 Жыл бұрын

Thanks Stuart, I hadn't come across these before, they look like a simple effective solution so well worth knowing about ! I have always used "Toly" hooks, and they're pretty effective and reliable for most pictures and can be used on other types of wall as well. I still tend to use a plug and screw for Mirrors though as they can be very heavy - we have one that is around 20kg. I have also used expanding hollow wall anchors for this, but I have a love hate relationship with these fixtures, so now avoid them if possible !

@whitemoor66 Жыл бұрын

Like you i have only recently discovered these and i thought they looked brilliant. Your testing has confirmed that!

@DiHandley Жыл бұрын

Pretty impressive actually. Thanks for the heads up Stuart.

@gerryforrester2211 8 ай бұрын

Was considering these, your vid has ‘nailed it’ for me. Thanks for the great vid.

@frostyarnie2941 8 ай бұрын

Thank you very much, really informative and entertaining to watch. I’m moving in a couple of months time so these claws will come in very handy indeed. 👍👍

@apmeehan 4 ай бұрын

I don't know what I'm more excited by: this new wall fixing (I have about 20 picture frames that I was literally about to start hanging up around my flat, and am so glad I now won't be having to drill 6mm holes all over the walls), or the ingenious dust collection device at 1:19.

@basfinnis Жыл бұрын

Thanks for showing this. Just what I need.

@chriscozens34 Ай бұрын

for the advice for the quality for the early dead pan gags - just class

@user-ui1wl4jl3h 4 ай бұрын

Wow thank you so much for you sooo great vidéo I tried it and magically was able to do a good job truly Merci! I used a 65 lbs claw hook for a heavy! Frame picture print

@martinhunt6004 Жыл бұрын

Most splendid Stuart. A good job.

@markshaz8691 Жыл бұрын

These are bloody genius!

@silush630 Жыл бұрын

What a great idea. I normally use the normal rawl plugs but will use these in future. More stuff like this on the channel for sure

@derpleyew 10 ай бұрын

Omg the music is so tense while the final weight test is being done 😂 Great video. I bought some of the 7kg ones a while back and haven’t got around to using them yet, but now I am going to make use of them.

@carlhobson1578 Жыл бұрын

What a great simple solution😊

@KimmoJaskari Жыл бұрын

They're really clever, I picked some up the other week. For heavier stuff, I got some Fischer Duotec pulltoggles, 10 mm - should hold stuff like TV's just fine. And I also picked up some GeeFix UK made ones... they're ludicrous overkill but my home has a long way between studs for some reason, the builders probably skimped... (was before my time). So I may use the preposterously huge GeeFix ones to fasten tool racks in the garage or something.

@valborchardt3596 Жыл бұрын

Thank you Stuart. We dont have any plasterboard in our house. These old houses are built many many years ago and the bricks are very hard. Drilling a hole in them is a nightmare. But thanks for the video

@lesthiele4921 Жыл бұрын

Will have to see if they are available in Australia, thanks for the preview Stuart,

@NikNakGB Жыл бұрын

If you're gonna knock them in with a hammer then it's better to use a socket (the type you'd use for nuts & bolts) as a drift. This enables you to spread the impact more evenly & prevents damage to the hook

@MikeSmith-sg9pt Жыл бұрын

Great video, ordering some of those immediately!

@Theosplaytime Жыл бұрын

Great little invention, I wish there was something so simple for traditional brick/plaster walls

@k.hussain360 Жыл бұрын

Literally thinking the same thing as I watched this video

@Markusbloodpet Жыл бұрын

Fischer has a similar product (in German "Bilderkralle"). I'm using them on a traditional wall with thin plaster and wallpaper. Works like a treat.

@nobodydoesithalfasgoodasyou 11 ай бұрын

There are perfectly good fixings for plastered masonry in the form of small plastic hooks held to the wall with masonry nails

@MegaClera 3 ай бұрын

Thank you a brilliant demonstration and at last I can hang my mirror and paintings

@robjames292 Жыл бұрын

Thanks for another great video

@atko1355 Жыл бұрын

Hi I enjoyed the test you made. It would be interesting to twist the barbs Horizontal to see it the increased area on the plaster bird made a difference. I must admit I would have thought that 3 M would have done this as a twist at the mid point I think would give greater load bearing on the plaster board.

@TheGraemeEvans Жыл бұрын

The strength of plasterboard never ceases to amaze me. though for sub 1kg pictures a simple small nail would do just fine. I'd only ever use these fancy brackets for something more substantial like a large mirror maybe.

@KimmoJaskari Жыл бұрын

There's no downside to using these, though, and they are way more guaranteed to hold.

@nnnbooks1211 6 ай бұрын

this video was more exciting than some of the marvel movies. thanks for testing :)

@LiamWelfordPhotography 11 ай бұрын

Would be interesting to see you hang the max rated load overnight or even longer and see how it holds up.

@john6203 Жыл бұрын

Nice recommendation, never knew these existed 👍

@paulwestlake4278 Жыл бұрын

BTW, if you have bigger pictures, use two hangers Equispaced, and your picture will not keep going crooked, height isn’t as important as getting them equal either side of the centreline.

@stephenschmid492 8 ай бұрын

Yes, they should really make a double hanger as one unit so you don't have to match the height. It's much easier to keep a picture straight when using two hangers.

@paulwestlake4278 8 ай бұрын

@@stephenschmid492 you don’t need to match the height, only the distance from nominal centre. Try it.

@muyiwaadebiyi5100 6 ай бұрын

Great video, got all the information I need 👍

@Harley-ir4er Жыл бұрын

Thanks for the demo. It's refrehing to see a company playing down the strength of their product in the name of safety.

@MalcolmJames-sg3zg Жыл бұрын

love your videos THANKS

@robertaitchison9029 9 ай бұрын

I used to have a print ( on paper) but the frame had a thick glass front panel and weighed a lot. It once fell off the wall on to my gas fire which caused some consternation at the time. This would have been a superb way to prevent that!

@AC-gm6bq Жыл бұрын

Nice product

@davidcurtis5398 Жыл бұрын

I like the "way of the hammer". Most likely the company puts the "insert with out hammer" type of instruction because they don't want people that have tried to put them in with a hammer and have hit the hook, trying to return them for a refund. I have the full plaster walls because my house was built in 1948 and then they did a full 1 to 2 inch coat of plaster. Wow, the weight they will take is amazing. I usually use 2 on large pictures. Another good thing I can see is that they can easily be set in line level with each other.

@garulusglandarius6126 Жыл бұрын

This product looks good but not cheap for what they are . Excellent as always Stuart 👍

@jonb3311 Жыл бұрын

Well overpriced for a bit of pressed, bent steel. One of those backstreet workshops in Asia would knock them out for 10pence each and still make a profit. Two quid a pop is paying for the 3M name.

@ocubextra 21 күн бұрын

Thanks for this, was a bit concerned it would not go into a UK plasterboard so you can imagine my relief when I heard the good old blighty accent ;-)

@davidmeyer9204 Жыл бұрын

Thank You

@rpavl 10 ай бұрын

Awesome video

@marksweetman8765 Жыл бұрын

Considering you weren’t sponsored that was a good review of what seems a good product

@lehiboo 8 ай бұрын

thanks !

@2CraftySeniors 5 ай бұрын

Even on lightweight pictures and such, for larger sized ones, I like to use 2 hangers of whatever type I'm using. That way the picture hangs straight and I don't always have to be fussing with it.

@tassie7325 7 ай бұрын

3M always produce some amazing products and this is no exception. But, just like you, when it comes to heavier frames I would prefer something a bit more substantial, purely for peace of mind. On the other hand, for smaller frames I will confidently stick to the method that I have been using for many, many years and my father before me, of just using a 30mm pin nail tapped in at a 45 degree(ish) angle to do the trick. It works on the same principle of the 3M hooks of transferring the downward pressure to the plasterboard and it leaves an even smaller hole when removed. The pin nail doesn't look particularly pretty, but neither does the 3M hook, and they are hidden behind the picture anyway.

@kosmasfostinis8017 10 ай бұрын

Thanks for info

@oldcodgerplaysgames9610 Жыл бұрын

Be interesting to see how they compare to a regular 2 pin picture hook

@DennisMathias Жыл бұрын

I think I like these because you don't have to worry about the studs behind the DW.

@k.hussain360 Жыл бұрын

Great little item, the weight limit is almost certainly down to the Plasterboard. I'd be curious how much weight it could handle if it was screwed into brick, before the actual bracket ripped apart, because neither seem to have deformed under the excess weight.

@mplussant Жыл бұрын

…GREAT channel-thx…

@joshuapinter Жыл бұрын

Brilliant, as always Stuart. You should add Canadian Amazon links in the future as well. There are dozens of us Canucks! :)

@elminster8149 Жыл бұрын

I've never drilled a hole to put a picture up. How are these better than normal brass picture hooks with a couple of pins to hammer in?

@georgemacdonald5282 Ай бұрын

I was just about to say that you should be wearing safety goggles and then i noticed that you put a pair on, a wee bit late though, but great video and nicely demonstrated, i think i prefer the double sided picture hangers, maybe you could do a test on these, it would great to see how they perform, all the best.

@xfilion 8 ай бұрын

Hello. Love watching all your videos. I'm an old bloke but have never done DIY embarrassingly. Have you got a video on preparing and painting a room?

@oldtimefarmboy617 Жыл бұрын

If you had a picture that heavy you could use two or more of the hangers to distribute the weight over two or more places on the wall. Just use multiple shorter string or wire assemblies on the picture to catch each of the hangers.

@Mani00786 Ай бұрын

I enjoyed your proper dubai vids. I didnt know you do DIY vids.

@FloppityFlopFlop777 Жыл бұрын

For shelves, I would think this would work as long as one uses the hanging type. Since the weight distribution of those should also create a downward load.

@victoria_bryan6766 Ай бұрын

I got the 30kg one for this ancient mirror. I couldn’t press it in. Thanks to this video, I’ll use the hammer 🔨

@c.a.g.1977 Жыл бұрын

Interesting stuff, Stuart! If I may ask: I am making an oak book case, 260cm wide by 25 cm deep by 40cm high, 3 cm thick. Quite a hefty one. Now it is supposed to be mounted with a French cleat to a plaster board wall. It seems the plaster board is thicker than usual, and I intend to use some screws into the metal studs, but am thinking of screwing the French cleat also into the plasterboard as well. Do you have any thoughts on which plugs I should use for this?

@jectaman9393 Жыл бұрын

I love it, is there any for concrete or standard brick walls? lastly i built a wooden shed/outside building and would love to use there not only for pictures but for other things, can i use this for a wooden wall? let me know please.

@maxximumb Жыл бұрын

Great video about a handy little bit of kit. A video suggestion. How to drill holes in very hard bricks. As well as how to recover from a hole where you can't see the mortar lines behind plaster and the drill bit catches the edge of a brick and then drifts off course into the mortar leaving a wonky or out of alignment hole. This is very annoying when you are drilling the last in a series of holes for brackets or something similar and the last hole just doesn't line up with the rest.

@MrXiaotrick Жыл бұрын

I think this is a video potential. I've had the same problem and wound thick electrical tape around the screw to raise it by a few mm.

@CraigRoyK Жыл бұрын

This is brilliant! The boss is chasing me to put up some pictures, so just ordered a bunch. Further to comments about plasterboard in the stately home! We’re in a barn conversion (not a stately home), but this means that many of the walls are clad in plasterboard. Some however are plastered so we have the challenge of figuring out which is which. I’m not great with “knuckle” test. Do you have a foolproof method of detecting which walls are plaster skimmed drywall clad vs plastered brick or stone?

@jonnyroberts3464 Жыл бұрын

These are a great idea. Would these be ok to use on a dot and dab wall too?

@KidneyMush Жыл бұрын

Great video, would this work in strammit board?

@scotthenry3401 Жыл бұрын

I would be very likely to stick scrum tape (mesh tape) to the wall where the bracket is going to go and skim over it to reinforce the wall although after watching this video i dont think it would change the outcome as it pulls out when it fails. , it is typically one third of the failure rate that the load capacity is set at.

@Gisburne2000 Жыл бұрын

If you do want to exceed the stated load, you could always use 2 fittings and loop the string/wire over both of them, or have two strings/wires. Angles and forces are then involved, and I don't know enough physics/maths to know how much extra load you could attach with 2 fittings, other than 'more than with just one'!

@keesgortmaker1100 11 ай бұрын

Just for the fun of it you might try to use 2 of them, say 30 cm distance to see if it will double the load 🙂 Haven't seen them in the Netherlands though..

@WhiteDieselShed Жыл бұрын

Can you repeat the weight tests adding one small blob of "sticks like" or other adhesive? Will that add a decent margin above the values you got? Thanks.

@TheRorydean 8 ай бұрын

I love that you took the them to failure for a true engineering test

@scottperry8388 Жыл бұрын

I know you probably know this but you (UK) call them fixings we (US) call them fasteners (along with many other thing) but we do have fixings too, It's a general word for the sides that go with an entree, so every time you say it I get a little hungry. The first time I watch one of your videos when you said fixings, I though you were going to attach something with an asparagus spear. :)

@martin_hansen Жыл бұрын

Regarding test, please make s follow up video where you had them loaded around max for long time, like s month or so, preferably on a wall that sees small vibrations, like steps on a staircase, or heavy traffic nearby. If loading it close to the stated load, I wold mainly be concerned with the long term endurance.

@Elfin4 Жыл бұрын

So you could use two with heavy mirrors etc. to spread the load? I think our 60" TV is 23kg in comparison.

@dw300 Жыл бұрын

If they made a little flat bit on the bottom of each prong (so each prong has an inverted 'T' cross-section), it could probably take double the stated weight.

@DrDRE4391 11 ай бұрын

The addition of a small nail in the bottom v-notch would be a third point of resistance and help prevent downward migration.

@woodydroneson Жыл бұрын

Think it could be improved by a 3M Tape that is heat sensitive and can be hair dryer set and hair dryer removed, just a thought :) Great video, sadly I don't have plasterboard ;)

@salttothesea 7 ай бұрын

So as these don’t go very far past the drywall layer, does that mean there is less risk of hitting a pipe or wire, i.e. can be placed pretty much anywhere? EDIT: you just covered it! 7:48