Рет қаралды 27,326
Learn how to remove, inspect, clean, and reinstall the thermostats on the Evinrude ETEC outboard boat motor. Follow along and see how easy it is to perform this simple maintenance yourself.
I recommend pulling and inspecting the thermostats yearly, this way they are well lubed and do not have a chance to seize up. Since the thermostat housings are plastic, they have a tendency to break sometimes on older outboards that have not had them removed, do to corrosion.
TOOL LIST
-13/16 Deep Well Socket (Inner lug on housing size)
-1 1/2" Deep Well Socket (Outed Lug on housing size) Optional removal point
-Breaker Bar
-Socket Wrench
-Triple Guard Grease
-Torque Wrench
**Housing torque is 120 to 144 in lbs **
Always refer to the manual for parts and questions
amzn.to/4cCujGF - E-Tec HPF Pro Gearcase Lube
amzn.to/3VMX6lW - Marine Lower Unit Fill Pump (Quart)
amzn.to/4aDyxvR - XPS Marine XD100 E-TEC Oil
amzn.to/3TIlx0Z - USB Diagnostic Tool Scanner KIT for EVINRUDE Outboard Engine E-TEC
amzn.to/3U2Xv21 - Champion Iridium 9005 Spark Plug - QC10WEP
amzn.to/3JbyETr - OEM BRP Evinrude Triple-Guard Marine Grease 14 oz
amzn.to/3xkRjK2 - Power Tilt & Trim Fluid
^Above are Affiliate Links^