Evinrude Outboard Controls Repair - Troubleshooting / Disassembly

No video

Evinrude Outboard Controls Repair - Troubleshooting / Disassembly

Рет қаралды 85,394

6 жыл бұрын

• Outboard Motor Control... - I made a new video providing more info on the wiring..
Evinrude, Johnson, OMC Control box disassembly.
These are Surface Mount Controls
NOT
Binnacle Mount.
Noted by one of the people in the comments.

Пікірлер: 50

@andyhollister4610 4 жыл бұрын

Great video I actually learned a lot about my controls.. might want to switch to decaf though. Almost got seasick😬👍

@jeffgallant9703 6 жыл бұрын

I am working on a 1982 evinrude 35 hp remote that needed a new ignition switch...when you get in to wiring it seems like a whole other story as far as easy vs non easy!! good video thanks

@cenkaetaya 6 жыл бұрын

Hey, the switch should be too difficult. On mine all the wires are connected with little bolts. You can google the wiring diagram. With this video I was just trying to show as much as I could since most videos dont really explain about what is going on inside much. Thanks

@jeffgallant9703 6 жыл бұрын

If you ever want to show the ignition switch install that would be awesome..thanks

@cenkaetaya 5 жыл бұрын

kzfaq.info/get/bejne/rrh6jc18z9LUon0.html Hey I just made a new video, it has some useful diagrams, this is just the first part. I pretty much took everything out of the controller and put it on a wooden board for testing.

@stephencromer1526 Жыл бұрын

This helped me tremendously. I appreciate the advice!

@bahlol8372 Жыл бұрын

What is the round black cylinder right above the key? Thanks

@bahlol8372 Жыл бұрын

Great video!

@charleskutrufis9612 Жыл бұрын

Thank you for this video, very helpful

@davedubriske9939 3 жыл бұрын

I am in the process of drilling out the heardware that holds the box together. Any tips getting the hardware out?

@byronallen3868 2 жыл бұрын

I'm having same issue

@tnriverbanks 2 жыл бұрын

Thank you for the video. I have a question sir. On my 94 Johnson 40 hp while night fishing when I turned the switch a weak alarm sounded in the controller and my tac and fuel gauge would jump but the boat would not start. I took off the auto oiler years ago. It does not appear the battery is low and getting ready to do a load test. If battery is bad would it sound the alarm? I also tried boosting with my Noco jumper on the water. Slow trolled in for 3 hours on Tn River. What all does that alarm control?

@gabebirkhimer9212 2 жыл бұрын

I have an old Evinrude Power Pro for my Johnson GT150. Power pro parts are old and worn, I’m looking to replace entire throttle control side mount. Any suggestions for replacing with a new throttle side mount That still hooks up roughly the same as far as shifting and choke linkages go?

@cenkaetaya 2 жыл бұрын

Not too sure, I generally go the buy a used controller on craigslist and use its parts or the whole thing.

@lucasfarris6483 Жыл бұрын

amazing video i bought a used boat with the controller needing fixed and the guy was talking about that ball im hoping you could point me in a direction where or how i can fix it i have a switch that has the 3 buttons from another controller but want to do it right if you have any tips would be amazing

@jacoblee6304 2 жыл бұрын

Hello, mine won't shift. But I disconnected at engine and can shift with the levers there. What part inside controller might be bad? Thank you

@bee2333 3 жыл бұрын

Im getting 90degrees on my butterfly in reverse but barely opens in forward. New cable too

@treyt6765 2 ай бұрын

My controller will only allow me to go forward. It won’t return to neutral all the way and won’t go in reverse. Can you please help me

@cenkaetaya 2 ай бұрын

You need to take it apart and watch the video carefully most likely there's nothing gripping the cables or you should be able to figure it out pretty easily when you open it up and just move the handle. The controller is very self-explanatory.

@treyt6765 2 ай бұрын

@@cenkaetaya I found the issue. It was the plastic gear that engages the throttle gear. One of the teeth was broken and threw off the alignment. Thank you for getting back to me. Is it possible to remove the old one and take one from a donor ?

@cenkaetaya 2 ай бұрын

@@treyt6765 yeah pretty much all the controllers are almost the same. You'll be able to know right away if it works or not.

@darylvallad1614 2 жыл бұрын

I have this controller box. Im looking for a parts diagram. Can anyone tell me what year(s) this controller was made? Thanks

@samtate1260 4 жыл бұрын

I got a 1974 115 evenrude and the Control was sloppy I tightened it up an now it won’t even turn over The throttle tensioner doing nothing it’s just sloppy flopping around

@kitokato7244 4 жыл бұрын

Same here but for a sohrt time my motor going in revers but he start like he ia neutral???

@brobertson251 Жыл бұрын

I don’t think that’s a choke lever, it’s only for warming the motor. The choke is operated by pressing the key in when starting via a solonoid on the motor, has a little red knob on the solonoid for manual choke.

@cenkaetaya Жыл бұрын

Throttle advance. You are correct it's not a choke.

@GringoSF 3 жыл бұрын

the changes in neutral and the manual throttle does not work I put change and if it works it should be

@rogersweet_OP 4 жыл бұрын

It would be a great video other than tapping with that damn screwdriver.

@byronallen3868 2 жыл бұрын

I bet your divorced Roger!

@brianestes4172 5 жыл бұрын

What type of grease should you use? And did you ever fix the neutral recognition switch issue?

@cenkaetaya 5 жыл бұрын

I used quicksilver Multi-Purpose 2-4-C Marine Lubricant. Yes, after cleaning everything / fresh lubricant the controller is working great.

@joshr9358 4 жыл бұрын

great video, but he didn't explain how to repair the shift button at the top of the shifter. I was really looking for that info.

@cenkaetaya 4 жыл бұрын

The one for motor trim up and down?

@joshr9358 4 жыл бұрын

@@cenkaetaya No the one for removing the shift lever and fixing the squeeze button at top of shift lever which allows you to put motor into F-N-R and speed up.

@alvinmorrow3368 2 жыл бұрын

I need a small plastic part for this can anyone help

@ELJAY3320 3 жыл бұрын

Would you sell any control boxes

@cenkaetaya 3 жыл бұрын

Check Craigslist they have those listed there quite frequently. Just search boat within a certain price range and you should come upon one.

@samtate1260 4 жыл бұрын

And it will not go in reverse on the Control only go forward

@cenkaetaya 4 жыл бұрын

Is the control itself not going into reverse or is it the engine?

@samtate1260 4 жыл бұрын

It was turning over The controller was loose I tightened it up and It won’t do anything

@samtate1260 4 жыл бұрын

I think it’s the control because I had a hard time trying to get it to go in and drive to reverse it did it a couple times and now It won’t do nothing

@cenkaetaya 4 жыл бұрын

@@samtate1260 I would take it apart and take a look inside. It's got to be something simple.

@cenkaetaya 4 жыл бұрын

1 more thing make sure the motor isn't actually stuck in forward. It will start up in forward gear just fine and it may not be immediately apparent.

@janeedwards8877 4 жыл бұрын

I REALLY NEED THIS INFORMATION; HOWEVER, YOUR CONSTANT QUICK MOVEMENTS WITH YOUR POINTER MAKES ME SO DIZZY I CANNOT WATCH...ALSO YOUR POINTER COLOR BLENDS IN WITH THE BACKGROUND MAKING IT DIFFICULT TO SEE AND FOLLOW. TRY AGAIN..??