Exhaust Baffle DB Killer Removal KTM 390 125 250 200 1290Duke Exhaust

Рет қаралды 562,006

Күн бұрын

If you want a louder exhaust for your KTM 390, 125, 250 or 1290 Duke then the cheapest way to do it is to remove the baffle. It only takes a few minutes and it makes a huge difference to the sound of your bike.
I use a 40mm hole saw. If you use a smaller one you risk hitting weld and it will take much longer to cut through. Also make sure that the hole saw is long enough so that the centre part doesn't hit the middle of the baffle.
To make this work - use the largest hole saw you can fit into the hole. Use one designed to cut steel (not wood) and make sure it's long enough (remember some have a centre piece which can hit the baffle before you cut through it).
This is stage one of the KTM Duke stock exhaust upgrade videos and is the starting point for transforming your bike
Apologies that the video is only in mono on the left.
Instagram: / moto_mirius
Subscribe to keep up to date with the regular content: bit.ly/2UWwY90
___
Some links may earn me a small payment - but cost you nothing
Links to Where I Purchase Parts:
eBay: ebay.to/2Io2l6L
Amazon: amzn.to/2KvMiFA
___
2017 KTM Duke 390 Parts List:
Akrapovic Slip On Exhaust KTM/RC 125 390 bit.ly/MotoMiriusKTMAkrapovic
Link Pipe For Remove Catalyst Leovince Duke 390 2017 - 2019: bit.ly/MotoMiriusLeovinceCatDe...
Magura X-Line Handlebar - Rok Bagoros Edition: bit.ly/MotoMiriusRokBagorosHan...
Rok Bagoros Adjustable Crash Cage: bit.ly/MotoMiriusRBAdjustableC...
Rear Sprocket 56 Teeth: bit.ly/MotoMirius56tStuntSprocket
Rear Sprocket 50 Teeth: bit.ly/MotoMirius50tStuntSprocket
O-Ring Chain 520 SRO6 120 Links: bit.ly/MotoMiriusORing520Chain
Galfer Wave Front Disk DF940CW
KTM Powerparts Engine Cage
KTM Powerparts Fork Slider
Rok Bagoros Front Freestyle Crash Pegs: bit.ly/MotoMiriusRBFreestyleFr...
KTM Powerparts Bar Ends: ebay.to/2Xcfv9U
R&G Paddock Stand Slider: ebay.to/2UgX1Dp
KTM oil Change Kit: bit.ly/MotoMiriusKTM390OilChan...
K&N Oil Filter: bit.ly/MotoMiriusKNOilFilterKT...
___
Playlist: 390 KTM Duke: bit.ly/2VGE3I0
__
Follow me here:
Instagram: / moto_mirius
Facebook: / motomirius
Website: www.moto.mirius.co.uk
___
Track: Kuyenda (feat. Sru)
Music provided by NoCopyrightSounds.
___
Logo: bit.ly/2Zau67P
#RokONSquad #MotoMirius #KTM390
moto mirius,RokONSquad,rok bagoros parts,ktm 390,ktm motorcycle,ktm,
ktm duke 390,390 KTM Duke,ktm duke,duke 390,390 duke,duke 390 mods, 390 duke mods, duke 390 modified
2017 ktm duke 390,ktm duke 390 2017,2017 duke 390,390 duke 2017,duke 390 2017,2017 ktm duke,2017 duke 390 modified,2017 duke 390 mods,
2018 ktm duke 390,ktm duke 390 2018,2018 duke 390,390 duke 2018,duke 390 2018,2018 ktm duke,2018 duke 390 modified,2018 duke 390 mods,
2019 ktm duke 390,ktm duke 390 2019,2019 duke 390,390 duke 2019,duke 390 2019,2019 ktm duke,2019 duke 390 modified,2019 duke 390 mods,
2020 ktm duke 390,ktm duke 390 2020,2020 duke 390,390 duke 2020,duke 390 2020,2020 ktm duke,2020 duke 390 modified,2020 duke 390 mods,
ktm rc 390,ktm rc,ktm,rc 390,390 rc,rc 390 mods, 390 KTM rc
2017 ktm rc 390,2017 ktm rc,2017 ktm,2017 rc 390,2017 390 rc,2017 rc 390 mods,2017 390 KTM rc,ktm rc 390 2017,ktm rc 2017,rc 390 2017,390 rc 2017,rc 390 mods 2017, 390 KTM rc 2017
ktm duke 125,125 KTM Duke,duke 125,125 duke,duke 125 mods, 125 duke mods, duke 125 modified
ktm duke 250,250 KTM Duke,duke 250,250 duke,duke 250 mods, 250 duke mods, duke 250 modified
ktm duke 200,200 KTM Duke,duke 200,200 duke,duke 200 mods, 200 duke mods, duke 200 modified
ktm duke exhaust modified,ktm duke exhaust modification,ktm duke 390 modified,ktm duke 390 sound,ktm duke 390 modified exhaust,ktm duke 390 exhaust,ktm rc 390 exhaust modification,ktm 390 duke exhaust removal,duke 390 baffle removal,390 duke baffle
ktm duke 125 modified,ktm duke 125 exhaust modified,ktm duke 125 exhaust mod,ktm 125 duke exhaust sound,ktm duke 125 modified exhaust,duke 125 baffle removal,125 duke baffle removal,duke 125 baffle removal, 125 Duke baffle removal
ktm duke 200 modified,ktm duke 200 exhaust modified,ktm duke 200 exhaust mod,ktm 200 duke exhaust sound,ktm duke 200 modified exhaust,duke 200 baffle removal,200 duke baffle removal,duke 200 baffle removal, 200 Duke baffle removal
ktm duke 250 modified,ktm duke 250 exhaust modified,ktm duke 250 exhaust mod,ktm 250 duke exhaust sound,ktm duke 250 modified exhaust,duke 250 baffle removal,250 duke baffle removal,duke 250 baffle removal, 250 Duke baffle removal

Пікірлер: 717

@bhunt6199 4 жыл бұрын

My left ear enjoyed your video

@MotoMirius 4 жыл бұрын

Thanks. I’m not sure why the sound is in mono only 🤔. Unfortunately since I’m deaf in my right ear I didn’t notice in editing 🤬. Skäl. David

@felakawilam5747 4 жыл бұрын

Fine with meee

@Thulldai 4 жыл бұрын

Yup, i thought the right side of my earphone stopped working😆😆😆

@XNK--C 4 жыл бұрын

@@Thulldai same 😬

@MotoMirius 4 жыл бұрын

It’s just to test who is paying attention 🤔

@bvkstha4944 3 жыл бұрын

I love the stock silencer of the new KTM duke 200, 250 & 390. It's looks so good.

@MotoMirius 3 жыл бұрын

Stock silencers are pretty good quality, so if you like them, then no reason to change.

@codymouret 4 жыл бұрын

38mm worked as that was all I could find at the local hardware store. Also when cutting, after a few minutes the cutting will change from smooth to getting caught up on jagged edges. this indicates you have cut thru the material. Carefully proceeding to cut until only a little material is hanging on, use pliers and work it until loose and no worries about fishing it out or large amounts of metal shavings getting in the exhaust.

@MotoMirius 4 жыл бұрын

38mm can be difficult if there are large welds. Glad you got it through ok and great advice 👍. Skäl. David

@carlos-cj2862 Жыл бұрын

Yeah I’m having trouble with a 38mm

@abhishekbose317 4 жыл бұрын

Nice video mate...awesome.. 👍🏻

@MotoMirius 4 жыл бұрын

Thanks. Much appreciated. Skäl. David

@10sss77 Жыл бұрын

This video is really informative and not many on these bikes at all so thanks a lot, I’ll take the advice of the decat pipe but keeping a baffle 👍

@MotoMirius Жыл бұрын

Thanks. Typically I run a decat, keeping the presilencer. This allows me to run any slip on I want - from quiet to loud without any risk of it being too loud.

@jorgenlannock 4 жыл бұрын

Very east and perfect result. Thanks 👍👍✌️✌️

@MotoMirius 4 жыл бұрын

Welcome and thanks 👍Skäl David

@shivdeepsinghgrewal3920 4 жыл бұрын

You got good stuff mate.

@MotoMirius 4 жыл бұрын

Thanks, appreciated. Skäl David

@noobonline4674 3 жыл бұрын

Really awesome video, m going to do with my RC390, Thankyou

@MotoMirius 3 жыл бұрын

Thanks. Good luck with that. Skäl David

@KROWARIZONA 4 жыл бұрын

Nice video! I can’t wait to see the next one. Well, I have a question about the DeCat. When you do the DeCat do you have to add some device (like a micro computer, chip) to indicate the system of the bike that you are not using it?

@MotoMirius 4 жыл бұрын

Thanks. Yes, you do. I talk about it in the decat video. Though with decat most people including me mean cat and presilencer. ECU is locked which means you need an external device between bike and ECU. Skäl. David

@MelegaPF Жыл бұрын

Great!!! I bought a Duke yesterday and today on morning remove original db killer as you.

@MotoMirius Жыл бұрын

Great stuff!

@sandeepkochgood7111 2 жыл бұрын

Perfect sound!

@MotoMirius 2 жыл бұрын

It’s a good sound 👍

@LVCMTB 4 жыл бұрын

Nice vid. Thanks

@MotoMirius 4 жыл бұрын

Thanks, much appreciated Skäl David

@mktmtu1291 4 жыл бұрын

Great video

@MotoMirius 4 жыл бұрын

Thanks. Much appreciated. Skäl. David

@michigantroutaddict4910 3 жыл бұрын

Just drilled mine out and it definitely sounds much better and doesn’t seem to have caused any low end power loss. I did notice I’m getting an occasional lean pop but the bike also popped before I drilled out the silencer. Definitely going to pick up a piggy back ecu soon.

@MotoMirius 3 жыл бұрын

Sounds great. Yes, more pop is normal as the air flows more freely. Not always lean running. Pop is also caused when throttle shut off dumps unburnt fuel into the exhaust

@bonvincentagbisit4503 4 жыл бұрын

Nice vid. Keep on makin em.👍

@MotoMirius 4 жыл бұрын

Thanks. Much appreciated. 👍 Skäl. David

@chazphot 4 жыл бұрын

Never seen someone use a hole saw for getting out a welded baffle before but it seems like a great solution. I was waiting for you to get that swarf out with a handful of throttle :)

@MotoMirius 4 жыл бұрын

Ah, I just can't tell you how tempted I was to do exactly that, but I could just see all the negative comments :D Skäl David

@shobharani2698 3 жыл бұрын

I'm stiil gonna buy the Akrapovic just because it looks sooo good on the duke 390

@MotoMirius 3 жыл бұрын

Nothing wrong with buying parts because they look good!

@TheJWC56RSA 4 жыл бұрын

Very informative as always. Thanks David. Why would you keep the baffle when you decat? Regards.

@MotoMirius 4 жыл бұрын

Because the decat makes the bike a lot louder. It depends where you live but I have to keep the baffle in on my Akra because otherwise it would be a police magnet 😂😂. Skäl. David

@jakedeadmon1183 3 жыл бұрын

I have the full cat and premuffler delete with the db killer installed and it's too loud now. Take out the baffle and it would sound like a straight pipe.

@garethmayfield4014 3 жыл бұрын

I've just tried this with my 1290GT. 51mm hole saw. what a nightmare!!!! saw would not touch it. ended up chain drilling with a 2mm coldest drill. sounds fab though.

@MotoMirius 3 жыл бұрын

Glad you got there in the end. Stock exhaust is quite high quality - not sure about the 1290 but I'm assuming that it's also stainless which is really tough to cut and you need a decent quality metal hole saw which is also long enough. But what counts is making it work, so fantastic! Skäl David

@KROWARIZONA 4 жыл бұрын

Could you give me the specification about this (in 3:14 video) tool please? I’d appreciate. Thank you

@MotoMirius 4 жыл бұрын

It’s a 40mm hole saw for metal. For this job just a cheap one is fine. Skäl. David

@Marcel204_ 4 жыл бұрын

good video :)

@MotoMirius 4 жыл бұрын

Thanks. Much appreciated. Skäl. David

@mattbowman3641 3 жыл бұрын

Jeeeeeesus!!!!40mm lol I've just realized I've been using a 38mm and I've effed it lol why didn't i check out your vid sooner?!lol..thanks mate

@MotoMirius 3 жыл бұрын

Smaller works, just harder to cut through! Good luck! Skäl David

@mattbowman3641 3 жыл бұрын

It really didn't i bought a brand new saw bit,lubed it with cutting oil..it seem to just chatter around because of the loose fit..anyway it stripped the teeth lol.after i seen your vid i went back and gotta 40mm and bingo haha it sounds waaaaaay better man!!

@MotoMirius 3 жыл бұрын

@@mattbowman3641 Yeah, the reason for going bigger is because you avoid the weld in the centre. It's stainless steel so very hard and will blunt the teeth - it's why I recommend as large as you can fit in there. Some people have managed it with 38mm but.... Glad you managed it! Great job!

@mattbowman3641 3 жыл бұрын

@@MotoMirius cheers mate,same here!!I'm lovin' your 390 vids man.lol keep em coming!!🤘🤘i think my next step is a new bars setup and power commander 5 with k&n.

@MotoMirius 3 жыл бұрын

@@mattbowman3641 Thanks and sounds like a plan. Good to see that Dynojet have finally stepped up and now offer units for the gen 2 Dukes.

@rebecca1610 3 жыл бұрын

Great video. I did this a couple weeks ago to my 2020 duke 390 and it sound great. I just bought a Powertronics piggyback ECU and am wondering if I need a dyno tune or can I use the map they already have installed? This is the only mod I’ve done but I’m considering the Coober air box lid at some point.

@MotoMirius 3 жыл бұрын

Thanks. Their standard map should be fine. PowerTronic do great modules but you really need to be sure that the map matches your configuration. I would recommend the mapped units like that for more developed builds where you are looking to build power and know what you are doing. Skäl. David

@rebecca1610 3 жыл бұрын

Moto Mirius Which would you recommend I use instead of PowerTronic?

@MotoMirius 3 жыл бұрын

If you have the PT then use it but check that the supplied map works with your configuration. Normally this is OK but mapped units are better for track day and power builds. For street use where you are not monitoring the bike then something like a RapidBike Evo Exclusive is better in my opinion.

@user-vj6qk7pc1y 3 жыл бұрын

hai. i enjoy watching this channel... I wanted to ask if this video in particular can be applied to duke 690...and if is there a way to get rid of the ugly presilencer.

@MotoMirius 3 жыл бұрын

Thanks, much appreciated. I'm not familiar with the 690 stock system and not sure how it changed over the years so I can't comment on this particular mod. But there are certainly cat delete pipes out there so I suspect some of those will also delete the presilencer.

@tonyvargasjimenez6021 4 жыл бұрын

I want to see that new video to cut the exhaust 👌✊🤩

@MotoMirius 4 жыл бұрын

Coming soon Tony. Makes a much better braap than the stock exhaust even without the baffle. Skäl. David

@MrDingle1987 4 жыл бұрын

Me too tony. I am waiting to buy another stock exhaust. Won't buy it until I have seen the stub cut. Can't wait much longer lol

@Calvingarage Жыл бұрын

Hello, old post but I have a question for you, I have a duke 390, 0km 2021 bs6, still in brake in. The vibration on the entire bike is insane, all the frame,, handle, foots, everything vibrates so much. Do you think un your opinion it may be an exhaust resonance or something? Or maybe something more serious. I like to do these things by myself.

@MotoMirius Жыл бұрын

Hard to say without seeing the bike - compared to my Sportster the Duke is silky smooth. All singles will have some vibration and more race oriented ones like this have more. But I don't notice anything particular - but then I'm used to the Sportster. It doesn't seem likely the exhaust would vibrate the whole bike.

@meatboy5246 4 жыл бұрын

I have a 2019 rc 390, I bought an akra and was disappointed when I found you cant just remove this when you like, it sounds pretty similar to stock sound. Would this be the best method or what other options are they. I wouldn't like to mess up a 500 pound plus exhaust. Great vid by the way. Also is this legal and fine for MOT etc.

@MotoMirius 4 жыл бұрын

Thanks Richard. The Akra baffle is removable and you can fit an aftermarket baffle that is louder than the Akra one. Akrapovic Exhaust DB Killer Removal KTM Duke 390 125 250 kzfaq.info/get/bejne/grSHltmdrLXIo6s.html I will be making a video on making the baffle easily removable using the same system Akra used before Euro4 banned removable baffles once I’ve summoned up the courage to drill the carbon fibre. The biggest change to sound levels will always be decat. Skäl. David

@springy-2112 4 жыл бұрын

I don't think my bm has an exhaust , at least I can't hear it 😀but the new bike makes up for it its got 3 👍🏻peace and love brother 👍🏻☮❤

@MotoMirius 4 жыл бұрын

Cheers Springy. What’s the expected life span of the new bike? 🤘. Skäl. David

@springy-2112 4 жыл бұрын

@@MotoMirius Well, at least 3 months if it's going to be a long term one 😭 after all I've only had 51 bikes now all different and there's still hundreds to get through 👍🏻😁🤘🏻

@angweirdo7604 4 жыл бұрын

Awesome 👏

@MotoMirius 4 жыл бұрын

Thanks, much appreciated. Skäl David

@TheCoooool123 4 жыл бұрын

Volume normalization and that's the first time I've heard someone call it a-crap-o-vich 😂👌

@MotoMirius 4 жыл бұрын

Volume is now beyond my ability to correct, but at least you now know how the manufacturer pronounces it!

@siddharthsingh2808 4 жыл бұрын

First i thought that my left earphone isn't working 🤣🤣🤣

@MotoMirius 4 жыл бұрын

I'm glad to see that my test to see if you were paying attention worked :D Skäl David

@MotoMirius 4 жыл бұрын

@Mags64 I'm deaf i my right ear - I can hear sound coming from the left - I can't hear if the right headphone is making sound. The right headphone plays sound captured by the right mic channel and in this case no sound was recorded in the right mic channel - no inversion, that is sorted in the mic.

@MotoMirius 4 жыл бұрын

@Mags64 Ha, no problem, it's just annoying that it happened and I didn't catch it before it was published and it got locked down.

@John-hi2yi 4 жыл бұрын

Nice video, are going to do an update of the learning CPU you fitted?

@MotoMirius 4 жыл бұрын

Thanks John. Yes, it’s in the works. Just trying to get a broader spread of opinions from people who have them. Skäl. David

@SaddamHussain-sp7ow 3 жыл бұрын

Owsm trick sir 👍

@MotoMirius 3 жыл бұрын

Thanks and welcome

@aboodhusni1185 11 ай бұрын

Hello David I really appreciate the information you share with us. I’m looking for performance with a little bit of good sound so I’m planning to decat while keeping pre-silencer,stock exhaust and then tune it any advice. Thanks in advance

@MotoMirius 11 ай бұрын

Thanks, much appreciated. Decat will give you a noticeable increase in sound, but it will not be too loud. You can then fine tune the sound levels by changing/ modifying the slip on. If you want to ensure that the tune allows for the changes then I would looking at something like the FuelX Lite. If you want to actually tune the bike then you need to consider a full piggyback unit.

@aboodhusni1185 11 ай бұрын

@@MotoMirius Thanks for replying, I found out that there is a big difference in price between fuleX&piggyback dose that applies on performance too since I’m decating and removing the stock exhaust baffle only

@MotoMirius 11 ай бұрын

@@aboodhusni1185 Yes, you get what you pay for. And with PT that is just the starting point since you would want to get the right map loaded. For the same reason you would not want to buy the FuelX Pro. But the Lite will do the job you need it to do.

@sebastian12189 3 жыл бұрын

Hello David, does removing the baffle from a stock Duke 250 increase the back pressure and will it make the bike run lean causing future problems to the engine/the bike. Is it must that I need a piggy back if I only remove the baffle from the stock exhaust or can I run on the ktm provided ecu...

@MotoMirius 3 жыл бұрын

OK. Most exhausts have back pressure - this isn't considered a good thing from a performance point a view but the result of a poor exhaust design. KTM have actually done a decent job on a stock system but they have to meet emissions requirements. Back pressure is largely going to be from the cat not from the baffle in the secondary silencer (since this is on the other side of the cat). In a stock system, removal of the baffle will probably have little impact on back pressure. The same applies to lean running - you can replace the stock end can with a powerparts exhaust from KTM which is more free flowing and KTM say will not cause lean running. I would not expect lean running to be caused by removing the baffle on an otherwise stock system and most people run just with the stock ECU. If you wish peace of mind or you wish to help smooth out the rough running at low revs on the stock bike then an entry level piggyback may be your solution. Skäl David

@sebastian12189 3 жыл бұрын

@@MotoMirius Thank you David...

@melallanaseron5552 4 жыл бұрын

Hello from the Philippines... Do I have to replace my ecu for piggy back type if I will do like this exhaust?

@MotoMirius 4 жыл бұрын

Hello. Most people consider that unnecessary for this mod. KTM advice is that no change is necessary when fitting the more free flowing Akrapovič exhaust so I see little difference here. Skäl. David

@RogueSamd 4 жыл бұрын

I'm going to do that on my husqvarna 701 vitpilen someday when I have one.

@MotoMirius 4 жыл бұрын

That's a nice bike. Skäl David

@RogueSamd 3 жыл бұрын

@@MotoMirius i love it

@MotoMirius 3 жыл бұрын

Thanks

@tommo6464 4 жыл бұрын

Hi, Great video. Will this work on all stock EXHAUSTS? I have a husqvarna vitpilen 701

@MotoMirius 4 жыл бұрын

It will work on many stock exhausts - but the details vary. It's best to take it apart first if it made up with rivets so you can how its constructed.

@tommo6464 4 жыл бұрын

@@MotoMirius yea I checked... I would need a very long hole saw to get to it annoyingly as it is like a slanted end.....

@rjtastic 4 жыл бұрын

bro when you record the audio just use the "mono" setting or just use mono settings in your editing program! you'll never get unwanted results that way. informative video tho.

@MotoMirius 4 жыл бұрын

Thanks. This is the only video I’ve had this problem with. If I weren’t deaf in my right ear I would have caught it in post. Skäl. David

@rjtastic 4 жыл бұрын

@@MotoMirius oh my god I'm really sorry on behalf of all these hate internet trolls.

@MotoMirius 4 жыл бұрын

RP ha, no problem. It’s just very irritating that I didn’t realise until it was uploaded and live. Just one of those things! Skäl

@janmajnik6889 4 жыл бұрын

@@MotoMirius consider a cheap lav mic. Would improve your sound in the videos a lot! I really enjoy your content!

@joshuabell473 Жыл бұрын

Great video. I want to know. Will this affect the decompression of the engine

@MotoMirius Жыл бұрын

Thanks. KTM state that fitting the Powerparts Akrapovic slip on requires no changes to the engine - this does not have a bigger effect than fitting the Akrapovic

@DarioTelloLab 4 жыл бұрын

Hi , does this change improve or worsen the bike's performance? I know that removing the db-killer changes the carburetion

@MotoMirius 4 жыл бұрын

Removing the DB killer will alter the carburetion but for most applications within the existing KTM fuel map. It is impossible to guess exactly what the effect will be for your bike. There are many variables which affect carburation and performance including fuel and altitude which would change the actual impact on your bike compared to mine, however if you are running a stock exhaust then I think you are overthinking this. Skäl David

@mr.mystery-X 3 жыл бұрын

So did i get more tor. Or hp. If i do the same at my duke 390 or not?

@MotoMirius 3 жыл бұрын

Not that you will notice. Getting extra power normally requires adding little bits from several different changes. Some people have claimed a loss of power, but there is no one single simple answer (despite what some sellers might want you to believe).

@amar4362 3 жыл бұрын

Will drilling a 1/4 inch hole in center of exhaust give the bike a little better sound and would I have to rejet carb?

@MotoMirius 3 жыл бұрын

It will give a better sound - but it depends what you think better sounds like. It doesn't have a carb, it's fuel injected and the ECU is locked out so you would need a piggyback to alter anything. For just that you are unlikely to need any changes, but if you are concerned then a basic piggyback will do the job.

@kiwiboy82 4 жыл бұрын

sounds good

@MotoMirius 4 жыл бұрын

Thanks. Skäl David

@Dannyfr33sh 2 жыл бұрын

Removing this adding k and n high airflow filter and coober high airflow intake lid coupled with a Powertronic ecu would I have to change map ?

@MotoMirius 2 жыл бұрын

If you fit the airbox lid then yes.

@MrAmorti 4 жыл бұрын

Magnet on a stick would be a good tool to retrieve the baffle and clean up the cutting swarf

@MotoMirius 4 жыл бұрын

It's stainless steel - magnets don't work very well. But you can certainly use a stick and maybe some tape to achieve the same. Skäl David

@VFactory-vl5fi 4 жыл бұрын

Hi mate, if the dB killer is removed from the stock exhaust? Will this fail the mot?

@MotoMirius 4 жыл бұрын

Unlikely. Depends on the tester. Depends if you are running L plates or the bike doesn’t look well cared for. You might get an advisory - some consider that a badge of honour. The bike only gets loud when you decat it. Skäl. David

@ultralinx200 4 жыл бұрын

I had Gsx R 150, gsx r 125 people called it in euro. Can i doing it on my stock exhaust? It LOOK i can do it, because the tip looks like your exhaust, but i have no idea about how it look like inside

@MotoMirius 4 жыл бұрын

I haven’t done it. It looks like you can and if you have a welder then you could try it and weld it back up if it doesn’t work. Hard to know until you do it as you can’t see the construction inside.

@edgar9651 4 жыл бұрын

Thanks! Except of the sound, does the engine perform any different (smooth, backfire, etc.)? Some time ago I spoke with my KTM dealer about this. They told me one of their customers did this but then the bike was not running well anymore. What is your experience?

@MotoMirius 4 жыл бұрын

My experience is that there are no issues. With a system that flows more freely popping in the exhaust can happen on deceleration but this is an exhaust effect not a performance issue. There are many reasons a bike might not run well. Skäl. David

@MrBraamSmit 4 жыл бұрын

What would you recommend to increase sound on the 2016 Duke with stock exhaust?

@MotoMirius 4 жыл бұрын

No easy mods there without cutting and welding. Best would be replacing with a pipe and back silencer like the 2017 Dukes. Skäl. David

@Bigshotaxe-xe1cs 2 жыл бұрын

I know this is an old video but I was wondering what adapter your using for the hole saw?

@MotoMirius 2 жыл бұрын

It comes as part of the Bosch kit with the hole saws, it's just gripped in the drill jaws

@acousticwarrior7 3 жыл бұрын

Great video, very informative. I have a Honda shadow 125 that I want to de baffle, 2 questions do you know if it is perfectly legal in uk? And would it cause any problems with future MOT? Thanks

@MotoMirius 3 жыл бұрын

Thanks. MOT doesn't (yet) fail on louder exhausts - but I have heard of some testers who do. The solution is to take it to a different testing station who will give you an advisory instead. There are normally testing stations who are more in tune with cosmetic alterations for bikes. Of course running L Plates never helps (if you do). As for legality, if you get pulled by DVSA then it's an issue (but this is very rare and typically only happens at regular big bike meets in public places), the police less so - but again it gets attention and that can cause it's own issues because 125 riders are assumed to be less experienced and more likely to have poorly maintained bikes - so loud exhaust is a good excuse to be pulled over. This is especially true for the really badly debaffled 125s which are very loud - but in a very bad way, just like a car where the exhaust has fallen off loud instead of supercar loud - same volume of sound but one you don't want to hear and the other you want to hear - it's all in the tone and tuning of the sound (so you need to keep some silencing). Bad loud = pulled over by police, good loud and a bike that looks well maintained = not pulled over by police

@acousticwarrior7 3 жыл бұрын

@@MotoMirius thank you very much for that very helpful, personally I don't want to go silly loud I just want a bit more beef lol I'm still in 2 minds about doing this, i have the silver tail exhaust, are there any other options I could look at? Thanks again

@MotoMirius 3 жыл бұрын

@@acousticwarrior7 Just a debaffle is not normally silly loud. I can't really say what options you have for the Honda, but if you have the silvertail, and the baffles are removable then you go custom and try different baffles. I use Pipewerx for this - to just buy baffles to size. I actually need to do this on my XVS because the current baffles are just a little too loud for my liking - I should have added in the first place that cruisers rarely have issues with getting stopped for being loud - it's sort of expected.

@acousticwarrior7 3 жыл бұрын

@@MotoMirius oh wow ok I never realized that you could actually get different baffles I thought it was literally there or not. And yes I guess you're right it is expected with a cruiser. I don't suppose you have a video showing the difference in baffles? And can any exhaust take any baffle?

@MotoMirius 3 жыл бұрын

@@acousticwarrior7 For an example of two baffles kzfaq.info/get/bejne/grSHltmdrLXIo6s.html Baffles are sized by the diameter of pipe they fit into. www.pipewerx.co.uk/webshop/accessories/db-killers-baffles/custom-baffles/ Not every exhaust is designed to have the baffles removed and emissions regulations are making it harder - which is what the video above is all about.

@connorpitts639 Жыл бұрын

My bike has no catylic converter. Will it be harmful in any way to the bike if I remove the DB killer as well? Thinking of doing this so I’d like your feedback. Thanks.

@MotoMirius Жыл бұрын

As a rule of thumb I recommend only one change if you want your bike to be safe. But it is easy to fit something like a FuelX Lite to keep your engine safe - engine rebuilds are very expensive.

@Robocoppat 4 жыл бұрын

David, Do they make a dual exhaust for this bike? And if not, would performance be Affected if I made one? Does that make sense?

@MotoMirius 4 жыл бұрын

There are a couple of dual exhausts for the bike - IXIL for example, though I think most were for the gen 1 (but can be fitted if you use the gen 1 header). Exhausts affect performance to some degree so it would depend how good your understanding of exhaust dynamics is - it's certainly easy to to make performance worse. Skäl David

@Robocoppat 4 жыл бұрын

@@MotoMirius I worked in an automotive exhaust shop years ago so I kind of have a grasp on it. However I wouldn't want to affect any power performance just to have a cool looking pair of dual exhaust. I was just wondering. Thank You for the prompt response. God Bless

@travancorepistons7309 2 жыл бұрын

Hi.. can we change the tank of 2012 ktm duke 200 to 2020 duke tank..

@MotoMirius 2 жыл бұрын

I don't have a gen 1 but don't see any reason why not. You may need to make modifications to brackets and seat will be an issue

@OscarDiaz-gr6ib 4 жыл бұрын

El sonido es mas ronco 👍q belleza...

@MotoMirius 4 жыл бұрын

El sonido es bueno Skäl David

@livetoride8668 3 жыл бұрын

Great job. I just bought used duke390, and I am getting inspiration from you. I am wondering what percent of the sound has been louder after removing it? In my country, the limitation is 105db. Do you think the sound would be louder than 105db? if you guess..

@MotoMirius 3 жыл бұрын

In my country, and most countries, the limitation is much the same. The difference is in how it is enforced and remember that it is louder at high revs so you have a lot of control over how loud your bike is when you ride - this is not a straight through exhaust and you have the cat, premuffler and still the slip on silencer so no, I don't think you will be over the legal limit

@anthonycaldi7056 4 жыл бұрын

Great Video...Question....is there any concerns about the metal shards left in the exhaust from drilling?

@MotoMirius 4 жыл бұрын

That is why I removed them. But if you leave them I don’t see an issue. They will remain in place or be ejected without issue. Skäl. David

@anthonycaldi7056 4 жыл бұрын

Thanks for your response. It really does make a huge difference!

@lunarsolis8109 3 жыл бұрын

Hello, what’s the size of the bit you used ?

@MotoMirius 3 жыл бұрын

I use a 40mm hole saw

@hectorvalero8562 4 жыл бұрын

Does anyone know if this works for the 2019 model?

@MotoMirius 4 жыл бұрын

2019 has the same exhaust. Skäl. David

@albertaragon1132 4 жыл бұрын

Hey man what model is your impact driver? Cheers

@albertaragon1132 4 жыл бұрын

Or its a drill driver?

@JO-nx4se 3 жыл бұрын

I thought my right earphone 💥 🤣

@JQUICK21 4 жыл бұрын

Would WD40 be OK to use instead of cutting oil? Hope so! Or how about simple Motor Oil?

@MotoMirius 4 жыл бұрын

WD40 is a water dispersant not an oil. Use motor oil. Skäl. David

@cbzhoney 4 жыл бұрын

Sir what will happen if we cut the waffle in half and again weld it in?

@MotoMirius 4 жыл бұрын

It will be a bit louder. See my other videos on this exhaust. For example Removable Baffle DB Killer Stock Exhaust KTM Duke 390 125 250 kzfaq.info/get/bejne/nax2iaSct9yln3U.html. Skäl. David

@keith_hudson 4 жыл бұрын

I am not claiming to know what I'm talking about but even if it is a cheap exhaust, if you remove the restrictions would that not allow more exhaust to flow and therefore add more power? Assuming you aren't running lean or anything.

@MotoMirius 4 жыл бұрын

Exhaust tuning is a complex subject and it would be different if you’ve decatted the bike. But yes, in principle more flow is more power so long as you are also adding more fuel. In practice? 🤔. It’s not unusual to lose power with the wrong choice of exhaust. I’m doing this because I want louder so ant power gain or loss isn’t that important to me, and it would depend on your bike setup. Skäl. David

@keith_hudson 4 жыл бұрын

@@MotoMirius right on!

@enairb.3986 4 жыл бұрын

we also do that in Philippines after enlarging the hole we put fiber to make deeper sound we call that "kalkal"

@MotoMirius 4 жыл бұрын

Sounds interesting 🤔 Skäl. David

@enairb.3986 4 жыл бұрын

my comment got a heart❤

@MotoMirius 4 жыл бұрын

Nocturnal PlayZ of course. Great content 👍

@enairb.3986 4 жыл бұрын

oh thank you!!

@angeljuniorcruzado4401 4 жыл бұрын

In your opinion, which is louder? Yoshimura alpha t slip on or this stock exhaust without db killer? I don't want too have too loud exhaust as it might attract attention of the police here in california. Thanks

@MotoMirius 4 жыл бұрын

Yoshi is probably louder. But it’s the decat that makes the bike loud not changing the slip on. Skäl. David

@angeljuniorcruzado4401 4 жыл бұрын

@@MotoMirius what if you drill small holes around the db killer instead of removing it? Will it make it louder? Just curious...

@MotoMirius 4 жыл бұрын

Angel Junior Cruzado yes. I mentioned doing this in the video. There are a lot of ways you can play with this to change the sound. I mention some more in my just published video. Skäl. David

@sairamlalibai4539 2 жыл бұрын

Nice 👍 video you should use magnet 🧲 to pull the db killer to much better to hadel the way

@MotoMirius 2 жыл бұрын

Thanks. Stainless steel isn't magnetic. It's easier just to tip it out as you should remove the metal cuttings anyway.

@davidgasparatos4531 4 жыл бұрын

I did this on my ktm duke 125, it sounds a lot better but I think it feels a bit slower, does the removal effect the acceleration?

@MotoMirius 4 жыл бұрын

Power tuning is a complex subject. I don’t think this has much impact on acceleration but you’d have do dyno runs before and after to really know. Skäl. David

@ultralinx200 4 жыл бұрын

@@MotoMirius dyno is much expensive than buying new aftermarket exhaust

@MotoMirius 4 жыл бұрын

Yes it is. But without using one you are only guessing what the impact is of any modifications. This is why companies like Akrapovic use a dyno when designing new exhausts. Louder exhausts sound faster but may actually be slower.

@antarikshverma1810 3 жыл бұрын

After are moving Db Killer Is the bike Performance Decreases?

@MotoMirius 3 жыл бұрын

Some people say yes, some people say no. Unfortunately bike tuning is not so simple and depends on many other factors.

@killerktm9153 Жыл бұрын

Would this run well with no piggy back ecu? I will be running full stock system including cat

@MotoMirius Жыл бұрын

The Powerparts replacement Akrapovic slip on requires no adjustments so this should not either.

@alconk7129 4 жыл бұрын

Does your Akropovic have a baffle in our out?

@MotoMirius 4 жыл бұрын

In. It was out until I did the decat. Then I needed to put it in to avoid being pulled over by every passing police car. Skäl. David

@thomaswilliamfirby180 4 жыл бұрын

Is there a restrictor ring in the cylinder head on these bikes behind the exhaust header as on eBay a few engines have what looks to be a restrictor pushed in to the exhaust port

@MotoMirius 4 жыл бұрын

No, it's just the shape of the exhaust port. The main restrictor on the 390 is the dent in the header, which depending on who used the hammer that day in the factory can be quite large. The Tyga header shows no dent is necessary - but only fits a gen 1 system. Skäl David

@thomaswilliamfirby180 4 жыл бұрын

Moto Mirius would it fit the 125 or would it be to big ?

@nigelstacey5612 3 жыл бұрын

Hi You wouldn't happen to have a 2015 390 brake pedal that you wish to sell? On the off chance. Cheers

@MotoMirius 3 жыл бұрын

Unfortunately I don’t have one.

@shahidyousuf5392 5 күн бұрын

"I used heat gas welding to remove the db killer from exhaust of my KTM Duke BS6. I successfully removed it, but the heat caused two big holes in the exhaust net near the end of the exhaust. Will these holes make the sound louder or quieter? Could there be any problems with the exhaust or engine because of these two big holes? Please reply."

@MotoMirius 5 күн бұрын

This is why I do not recommend that method of removing the DB killer. The heat will also have damaged the insulation in the silencer so you can expect it to be louder than it should be. It should not create any issues with the engine so long as you have made no other changes to the bike - air filter, cat delete etc. If you are concerned, get another silencer and try again or use something like the FuelX Lite to make sure the engine runs correctly.

@shahidyousuf5392 5 күн бұрын

Thanks for your reply. I want a louder exhaust. I was worried that it might cause any problems. Now you have reassured me. I appreciate you replying to my comment. You've got a new subscriber. Thanks, buddy!

@shengkunliu5369 4 жыл бұрын

Hello, I would like to inquire about the model of the hole punch you use, because I am a Chinese duke 390 rider, I do not understand it in the video, so I take the liberty to ask if there is something wrong , Excuse me, because i use google translation. Thank you! !! !!

@MotoMirius 4 жыл бұрын

Hi and thank you for watching! The hole saw was Bosch but any good saw will be fine. Skäl. David

@shengkunliu5369 4 жыл бұрын

Moto Mirius Thank you for your reply. I personally learned that it is a bosch hole opener, and also observed a 40mm diameter hole opener, but thank you for your reply! !! !!

@andrewbyrne425 4 жыл бұрын

Would this decrease performance at all? Like does it take away back pressure that the engine needs to run properly or something? Would you need a tune?

@MotoMirius 4 жыл бұрын

This mod should not require any change in engine mapping because KTM supply the more free flowing Akrapovič slip on and do not recommend any changes. Back pressure is important to power in these bikes, but back pressure is provided by the cat and the presilencer not the slip on. I haven't noticed any change to performance, but then that isn't important to me, so I'm not really looking for it. Skäl David

@abdallahbidawy2211 3 жыл бұрын

what kind of hole saw is that?? tried a regular metal one...the blades became round and fluffy! haha

@MotoMirius 3 жыл бұрын

You are cutting into stainless so cut slow with lubricant. And yes, use a decent quality saw because stainless is hard. Also make sure its as large as you can fit to avoid the weld because this is thicker.

@s4mw0w41 Жыл бұрын

I attempted this on my 2022 390 Duke a couple times unsuccessfully. The first time it turns out I had bought a wood hole saw so I went back out and got a 38mm metal hole saw along with the hole saw mandrel and that still didn’t work. Could it be that I didn’t use cutting oil or should I try a 41mm which is the next closest size available?

@MotoMirius Жыл бұрын

I think many people have made the mistake of not realising that there are different types of saw - this is stainless so it's harder than steel so it really needs a good saw for metal. Use a slow cutting speed not a fast one - oil helps to avoid the blades getting blunt so they keep cutting. What can happen is that the nose of the drill hits against the baffle - if this happens then you won't be able to cut any more - and it can take a long time anyway. Check that the drill isn't hitting and if so, see if you can move the saw a little bit further out - changing size of saw will only help if this is the problem if it is longer. Good luck, it should work for you.

@skrrrttt999 22 күн бұрын

did you end up cutting it?

@LEBXLS 4 жыл бұрын

Super l'ami!

@MotoMirius 4 жыл бұрын

Skäl. David

@cramadventure1900 4 жыл бұрын

lami gyud kaayo

@scrvlogs4118 4 жыл бұрын

Will it hamper the engine? and should it be done before 3000 km?

@MotoMirius 4 жыл бұрын

I suggest not before first service. So long as you have made no other changes, this is normally fine. Skäl. David

@dhruvsingh2666 4 жыл бұрын

hi i want to know about the tail change is it custom made cuz i was not able to find it online. nice vid BTW 👌👌

@MotoMirius 4 жыл бұрын

Hi and thanks. If you are asking about the tail tidy, it is a cheap Chinese piece of rusty metal. Whilst it works well, I couldn't recommend it. Skäl David

@forrestdevine2336 Жыл бұрын

@@MotoMirius I purchased a tail tidy from Mustard Bikes in Australia for my 2017 Duke 390. Excellent build quality, came with all the hardware I needed. Includes an LED plate light and retains the factory turn signals. Can't recommend it enough.

@MotoMirius Жыл бұрын

@@forrestdevine2336 sounds great!

@waseemcr2785 4 жыл бұрын

Will there be any issues with the engine in the long run if we removes the db killer/baffle?. Also, can't we do this by the method of gas cutting too?

@MotoMirius 4 жыл бұрын

Normally no issues - see my latest video. You can also gas cut but the chances of damaging the slip on are higher as is the amount of clean up after - you will also find it more difficult to convert to a removable baffle. Skäl David

@waseemcr2785 4 жыл бұрын

I tried to remove the baffle with a 38mm TCT hole saw(40mm is not available in my place), but unfortunately I couldn't drill out the baffle completely as the length of the hole saw is much smaller and hence the base of the hole saw is touching the tip of the baffle!. Can you please suggest me a way to get rid of the baffle?

@MotoMirius 4 жыл бұрын

@@waseemcr2785 The problem with using a smaller hole saw, and the reason I don't recommend doing it, is that you are more likely to hit the weld - this is harder to cut and there is more metal to cut. If you can't get a longer hole saw then I suggest seeing if you can adapt your current hole saw to give it a longer reach.

@waseemcr2785 3 жыл бұрын

@@MotoMirius Today I went to couple of hardware shops to find out whether I could get a hole saw with over 40mm depth and I did found out one, but the problem with that saw is that it's diameter is just 32mm but length is around 50mm. Will I be able to get rid of the baffle using this hole saw?

@MotoMirius 3 жыл бұрын

@@waseemcr2785 I suspect your problem is that you are trying to buy at local hardware shops rather than online. A 40mm saw needs to be only about 30mm to cut through the weld (the issue is often clearance inside the saw with the centre of hole saw hitting the baffle not the outside length), the smaller the drill the more weld you will need to cut through. The saw you found should do the job but make sure it's capable of cutting metal as stainless is a hard metal.

@samuelwright2219 3 жыл бұрын

I have tried this with the exact same hole saw but it's not going through 🤷‍♂️any tips

@MotoMirius 3 жыл бұрын

How easy and how long to cut depends on the thickness of the weld. If the centre of your hole saw has hit the baffle you will need a longer hole saw.

@23nucleab73 3 жыл бұрын

Does it harm engine by removing the stock exhaust Dp killer please do let me know.

@MotoMirius 3 жыл бұрын

For most people, if it is the only change you have made then no. It's impossible to generalise because it depends if your engine already has a problem or if you live somewhere extreme where the bike is already running at the limit of its map adaptation. If you have a concern then fit one of the basic piggybacks. Bear in mind that KTM sell an alternative exhaust that is louder and more free flowing and KTM are very clear that this exhaust will not harm the engine and does not need any modifications.

@asanuldilbar421 4 жыл бұрын

Do removing baffle leads to any engine issues?

@MotoMirius 4 жыл бұрын

If it’s the only change that you’ve made then normally no. Skäl. David

@manuelmielczarek5107 4 жыл бұрын

Why u don’t take out exhaust first, does do this on bench and after work just take on moto if u does it to throw out dB killer?

@MotoMirius 4 жыл бұрын

Because the bike is the best jig to hold the exhaust without damaging by trying to clamp it down on the bench. You don't really need to remove it to pull out the DB killer - it is possible to pull it out with a wire etc - but you will then need to be aware that it will fire all the metal cuttings out when you start it. Skäl David

@TheJWC56RSA 4 жыл бұрын

I bought the same cutter and tried it on my 390... after about 5 min of cutting I can barely see a cutting mark inside the exhaust.... I tried some expensive 4mm high end carbon drills to perforate the pipe (suitable for stainless steel) and even those struggle to drill through! (I used slow speed and enough oil). The exhaust seems to be very hard steel...

@MotoMirius 4 жыл бұрын

I’ve heard of people having trouble. Are you sure that the chuck isn’t fouling on the baffle? If the teeth can’t reach they can’t cut. It’s only 1mm steel but it is stainless so it will tough so it needs a hole saw for metal. Skäl. David

@TheJWC56RSA 4 жыл бұрын

@@MotoMirius The part I drilled through looks like 2mm or more stainless... the cutter is made for stainless and not touching - it is a 38mm cutter - I can only guess I'm going through the weld inside too....

@MotoMirius 4 жыл бұрын

That’s possible and if you are using 38mm you are could be into the thicker part where it curves back into the baffle. I’d still double check you aren’t hitting the tip of the baffle

@transdetendal 4 жыл бұрын

eny idea on " fixing" a stainless motad 4in1 ? i hate the restricktion on it !!

@MotoMirius 4 жыл бұрын

Motads tend to be welded so might be difficult. Depends on what it looks like. Skäl. David

@transdetendal 4 жыл бұрын

@@MotoMirius yup its welded and in one with the 4into 1 ... skål and have a good one !

@silvertaxi 4 жыл бұрын

Nice vid. Thanks. I’m in Uk. Is it legal, cos of the noise I mean?

@MotoMirius 4 жыл бұрын

This doesn’t make it loud enough to be an issue in the UK. That doesn’t happen until you de cat it as well. Skäl. David

@silvertaxi 4 жыл бұрын

Moto Mirius thank you. Keep up the vids

@Superdisco199 3 жыл бұрын

So what's better - de-beffle or de-cat ? you would lose torque and backpressure with de-baffle ? is the inside end of the baffle tube open ? thanks heaps

@MotoMirius 3 жыл бұрын

Define better? The bike has three silencers - cat, presilencer and tail silencer. Most of the sound reduction is in the cat and presilencer. Removing the baffle makes the bike a little louder. Removing the cat and presilencer makes the bike a lot louder. Most of the back pressure is created by the cat - back pressure from the baffle has to go back through the cat to get back to the engine. Tuning is a complex subject and will be affected by where you ride - altitude, temperature, humidity etc. Some people report loss of torque from removing the baffle others don't - but since no one has put the bike on the dyno before and after the change, these reports (and mine) are speculative. Baffle and cat are the only parts of the system that reduce sound by constriction. Most people make these changes to improve the sound of the bike, not to make it faster. Skäl David

@Superdisco199 3 жыл бұрын

@@MotoMirius Thanks for that... in my experience I've found bikes generally lose some torque when gutted for a better note. Whether its a crf250x or an MT07, you just notice it doesn't loft a front wheel as easy. So I guess in terms of better I just mean nice solid stock like performance but with a little more depth to the note. I can tell just from the KZfaq videos that it certainly seems less constricted when revved without the cat(mini cat delete).. but not sure how far will be too far with the bike. Worried that the modified muffler will put me in ag bike land with a boggy feel and was hoping to avoid complete new slipon. (I feel like the pre muffler def. needs to stay)Appreciate your comments.

@MotoMirius 3 жыл бұрын

@@Superdisco199 This was an area I was attempting to address in one of my recent videos but going back into lockdown means I can't get back on to it. My experience is that the baffle removal on a stock system is no louder than the legislation compliant Akrapovic slip on that KTM supplies - my feel is that sound is similar once you debaffle and stubby the stock silencer. As I run a piggyback ECU, I would need to buy a bypass unit for that before I could realistically say what it does to torque. I've been told by someone who has used a dyno that best power comes from cat removal, leaving the presilencer in place and using the Akrapovic slip on.

@Superdisco199 3 жыл бұрын

@@MotoMirius Thanks for that. I just watched your ECU vid. Nice work. I just got the bike and took the whole secondary/final muffler off and it actually seemed to boost the power (wheelied in 2nd). But it had a pretty nasty backfire. Your first stage baffle removal didn't backfire did it ? sounds a bit like I might need to get the RapidBike Easy at the very least.. Bike seems pretty jerky (2020) down low and then flat spots and then comes good. Really suspecting that mini cat removal and single debaffle would be the best trade off, but it's really thejerkyness bothering me most of all. My 250F is carbed and reklused! :-D

@MotoMirius 3 жыл бұрын

No backfire but I always run a piggyback. Backfire is typically a sign of running lean but it can be normal if it’s just on the overrun when there is excess fuel dumping into a hot exhaust with no baffles to absorb it.

@azharmohammad3518 4 жыл бұрын

Had any one tried older version exhaust on 2017 duke 390? Wondering how it sounds!

@MotoMirius 4 жыл бұрын

It has been done. It sounds exactly like a pre 2017 Duke! Skäl. David

@azharmohammad3518 4 жыл бұрын

Could you please share that link, if possible

@vittoriodantona6378 Жыл бұрын

Once Removed, can you put it back? I live in a city and there’s lot of police

@MotoMirius Жыл бұрын

I live next to a major airport so police presence is very high with a lot of bored police looking for something to do. I have a separate video on how to make it removable.

@raffaelerusso1756 4 жыл бұрын

Does it works also on husqvarna 701 stock exhaust?

@MotoMirius 4 жыл бұрын

I've not seen a 701 exhaust in person. The chances are that something similar would work. Skäl David

@doremon4126 2 жыл бұрын

Can I installed 120/ 70 front or rear 160/60 r17 tyre size in rc 390

@MotoMirius 2 жыл бұрын

As far as I know the RC runs the same wheels as the Duke, but I don't have an RC so I don't know what clearance you have on the front mudguard etc.

@Dannyfr33sh 2 жыл бұрын

Will this mod give me power or response difference with Powertronic ecu ?

@MotoMirius 2 жыл бұрын

Not so much that you will really notice it - but power mods on this bike come from making a number of small changes to the whole system.

@sairamjella3526 3 жыл бұрын

Any milage changes after removing db killer?

@MotoMirius 3 жыл бұрын

I don’t measure mileage. But as I will always say - it’s likely to make it worse because you will rev the engine more to hear it and revving the engine is always bad for mileage.

@SCutchins 3 жыл бұрын

You said that you may not want to de-baffle if you de-cat. Why is that? I did a full de-cat, straight pipe from header to stock silence, and the exhaust has a bad "ringing" sound at about 5,500 RPM so I'm considering the de-baffle. Thanks Edit - figured I would add that i added a Powertronic so she's getting more fuel.

@MotoMirius 3 жыл бұрын

Removing cat, presilencer and baffle is too loud for most places - it’s either illegal or it’s just a police magnet who will pull you over to check what they can find wrong with the bike or your license. Otherwise there is no technical reason you can’t do it but you should seriously consider a proper piggyback as you will almost certainly be outside of the stock fuel map parameters. Detonation can create a lot of damage in the engine and whilst you can ride for a long time without any issues just a few minutes outside of the map will grenade the engine.

@stevecutchins9069 3 жыл бұрын

@@MotoMirius Thanks for the reply! I do have a piggyback, I edited my comment afterwards to add that I do have a Powertronic, which I highly recommend by the way, massive difference in rideability without that ridiculous stock surging.

@MotoMirius 3 жыл бұрын

PowerTronic do good systems. Just make sure the map suits your setup.

@surslaughter3524 Жыл бұрын

So if I do this and then add a powertronic fuel auto tune device on my stock 22’ 390, I will have a less go cart sound and run less lean while preparing to go full exhaust down the road? I want to go catless but don’t want to void my warranty. So this sounds like the right direction. Except I imagine cutting out the baffle will also void my factory warranty.

@zeez9053 3 жыл бұрын

Yes that’s how u do it but what about fuel consumption/is it better for bike for the engine to breathe /is it better for horse power etc ? Loads of questions not being answered

@MotoMirius 3 жыл бұрын

This is a video on how to do it - the other questions are subjective and largely dependant on what you are doing and many of them will depend on where you live and how you ride. Each of them needs it's own set of videos to make any sense - I have started a series of short videos to discuss the basics behind your questions because the answers are not as clear as I suspect you think they are - it is not a case of do this, do that and then this happens - no matter what some videos might want you to believe. A quick example - this will increase your fuel consumption - not because it makes the engine less efficient but because you will rev the bike more once you can hear it and this burns fuel.

@zeez9053 3 жыл бұрын

Moto Mirius Thank for your explaination and your time