Exhaust Bolt On, Don't Tune

Exhaust Bolt On, Don't Tune - Will It Work?

Рет қаралды 3,575

Күн бұрын

www.scooterstreet.com.au
In this video we discuss and demonstrate why tuning your scooter to suit a performance exhaust is so important. Our aim is to demonstrate the difference each tuning part makes so you can decide for yourself whether these upgrades are necessary on your scooter!

Пікірлер: 62

@charlieoscar09 3 ай бұрын

Thankyou Brad.....brilliant video please keep them rolling onto YT

@scooterstreetau 3 ай бұрын

Thanks for your SUppOrt😻.

@P2DAPIPE 3 ай бұрын

Great vid. Best step-by-step information on tuning. Top stuff 👍

@scooterstreetau 3 ай бұрын

Thanks 👍 we appreciate receiving positive comments🙌

@AntisepticHandwash 3 ай бұрын

Simply fantastic video for beginners. Thank you!

@scooterstreetau 3 ай бұрын

Glad you like it, yes aimed for those who need to know.🙌

@atwntennisclub 3 ай бұрын

Could you go over the egr delete and what to block it off with when you're installing a performance exhaust on the zip? Also, what clutch springs would you recommend for the zip with a multivar 2000 varistor kit? Would be running 6.5g rollers

@scooterstreetau 3 ай бұрын

EGR is simple, remove all pipes except the main exhaust flow pipe and weld over the holes to follow the contour of the header where they have been removed. We used to weld and bent washer over the hole and fit a thread to insert a gas reading device. We recommend the Polini G3 clutch, adjustable and very simple. Otherwise the spring we discuss on this video. Watch the video you will see the spring discussion.

@Asups008 2 ай бұрын

Hey guys love your Videos I recently just bought a 09 Aerox just had a gainelli pipe on it at the moment wat would be a good 50cc reliable but faster kit for it and if it makes about 7hp will that still be quick

@CokieZip Ай бұрын

7hp will be quick with a good cvt setup, top speed is questionable, im guessing around 80-90kmh

@dovydas4036 2 ай бұрын

Awesome video

@scooterstreetau 2 ай бұрын

Thanks for the visit, glad you enjoyed it🙌

@harleyleitch1801 2 ай бұрын

Awsome stuff my bro . Now to ask the Mrs if I can get these mods 😂

@scooterstreetau 2 ай бұрын

Please do! Let me know how you go😂

@kiselapavlaka4749 2 ай бұрын

Hello my brother i have gilera runner 50cc 2009 can i put malossi or stage 6 performance cvt and yasuni r but to remain an ogrinal kit and what i need to upgrade with cvt and exhaust and which is better malossi or stage 6

@scooterstreetau 2 ай бұрын

Yes, I would also include an adjustable clutch because the power will lag at the start.

@secretsquirrel9722 3 ай бұрын

Great info! I was in hysterics though. One hand filming in thongs doing speed runs! So Aussie, haha She'll be right mate.

@scooterstreetau 3 ай бұрын

😂😂a little bit naughty, Aussie safety shoes.

@viaumarcandre Ай бұрын

You're the best!

@scooterstreetau Ай бұрын

🔥Respect🔥

@Rustyandriden 2 ай бұрын

Hi boss can the 2014 Aprilia 50mt have this same tune done to it. I did watch your piaggio typhoon exhaust install video aswell but i see there is a difference in the motor.

@scooterstreetau 2 ай бұрын

Yes you can but the 2014 model may have the early stle CDI not the ECU.

@Rustyandriden 2 ай бұрын

@@scooterstreetau so I just do the exhaust jet rollers clutch springs.. and I can get all these parts of your website

@scooterstreetau 2 ай бұрын

@@Rustyandriden Yes, email me and we can guide you. www.scooterstreet.com.au

@VaskoTheScoutMain 3 ай бұрын

Have you thought about converting the piaggio zip to 125/172/180cc piaggio motor ? like a SKR motor or Gilera runner motor? in the netherlands they do that quite often. Dont know about australia tho!

@scooterstreetau 3 ай бұрын

Good thought, we do not get the 125 model in Australia which is sad. This would be an amazing machine😝

@VaskoTheScoutMain 3 ай бұрын

@@scooterstreetauBummer ! I'd imagine getting one oversees would be extremely expensive because of customs etc.

@scooterstreetau 3 ай бұрын

Yes true. There is the possibilty to convert a local one.@@VaskoTheScoutMain

@VaskoTheScoutMain 3 ай бұрын

@@scooterstreetauWould love to see that as a video! 😁

@EinarLerschen 3 ай бұрын

Nice video.

@scooterstreetau 3 ай бұрын

🙏🙏

@insaneboiii-uy1qx 3 ай бұрын

Hey man i have piaggio nrg mc3 2004 and its going about 60kmh and reving 7000rmp so should i buy a unrestricted cdi or change main jet

@scooterstreetau 3 ай бұрын

If the rpm is limited, yes you can change the CDI. Otherwise consider an exhaust and associated parts.

@eivindberg8435 2 ай бұрын

Piaggio nrg mc3 does not have rev limiter

@unknown33428 2 ай бұрын

Hey guys! My partner just bought a Kymco Agility 50 and I was wanting to get it up to 80km/h. Any advice/input? It's brand new and hasnt been touched yet

@scooterstreetau 2 ай бұрын

It depends on what type of fuel system. Kymco is a Chinese scooter which is overpriced and the spare parts are the most expensive in Australia and difficult to derestrict, knowing this it may be best to only change the variator shaft.

@unknown33428 2 ай бұрын

@scooterstreetau I found some stuff on your site that i was hoping to throw in but not overly confident with these little things. Any chance I'd be able to bring it down to the shop?

@scooterstreetau 2 ай бұрын

@@unknown33428 Email us for workshop request.

@mcBrapson 3 ай бұрын

nice vid

@scooterstreetau 3 ай бұрын

Thanks for comment and for watching🙌, happy to have you ride with us.

@bekimshala-ez4fe 2 ай бұрын

hello i have a kymco agility 50cc 4 stroke i changed the cilynder i added a 80cc and i thought it was gonna go 100kmh but it didnt. im tryna put a malossi variator in does that make any diffrenc?

@scooterstreetau 2 ай бұрын

It will be difficult to get it to 100kph. Don't waste too much money with these. The variator may increase the accelration. Over all you need a racing head and cylinder, exhaust, CDI, larger carby and still it will struggle to 100kph.

@bekimshala-ez4fe 2 ай бұрын

@@scooterstreetau so the malosi varitator does not help for top speed just accelration?

@scooterstreetau 2 ай бұрын

@@bekimshala-ez4fe For the Kymco, yes! It will only gain top speed if the restricted variator shaft is removed and replaced.

@bekimshala-ez4fe 2 ай бұрын

@@scooterstreetau do u think i will reach 90kmh ore 100kmh ?

@scooterstreetau 2 ай бұрын

@@bekimshala-ez4fe When you consider a 125cc does 90-100kph, you would be lucky if you reach 85kph.

@rosscollier3992 Ай бұрын

I read somewhere the wild lion isn’t compatible with a 2018 Piaf goo typhoon, do you have any that are? Regards

@scooterstreetau Ай бұрын

This is misinformation, yes there is a Wild Lion that fits 18 Piag Typh. Select the Lion for the CA41M engine👍

@rosscollier3992 Ай бұрын

@@scooterstreetau Awesome thanks. I have just seen it on your website. Will put the order in on pay day. I see you dont do the roller/jet package anymore?

@rosscollier3992 Ай бұрын

@@scooterstreetau Would you recommend the wild lion over a higher performance exhaust. Its for my partners scooter (Which i ride a lot) getting around the city etc. How much louder are the more performance orientated exhausts?

@scooterstreetau Ай бұрын

@@rosscollier3992 we removed it as it did not have the coverage for all the engines it was purchased.

@scooterstreetau Ай бұрын

@@rosscollier3992 Wild lion has it advantages, low noise good down low power and additional top speed over the factory exhaust. It depends on what you want. Keep in mind it is for the Mrs👍

@jhyman2774 3 ай бұрын

Nice video Can you do a video explaining what needs to be considered when upgrading an exhaust, transmission or carburetor? Like if I upgrade my carburetor what else should I consider upgrading to get the most out of it

@jhyman2774 3 ай бұрын

Also how do I know what size carburetor to get

@eivindberg8435 3 ай бұрын

@@jhyman277417.5 carb is perfect for small tuning

@scooterstreetau 3 ай бұрын

Thanks JH, ok we can try for that request. The base is the cylinder and everything should copliment from there.

@scooterstreetau 3 ай бұрын

This also depends and the cylinder.@@jhyman2774