14 күн бұрын
3 ай бұрын
Жыл бұрын
Пікірлер
@fireblade5542 21 сағат бұрын
Hi Brad, is this the quietest performance pipe on the market other than the lion?
@leonardocarraro1559 21 сағат бұрын
My savior!!!
@Adecoinraco Күн бұрын
“You cant really get it wrong” - challenge accepted.
@scooterstreetau Күн бұрын
😂😂 what happened?
@ABG_adventures Күн бұрын
Hey mate, Do you do any dedicated 125 sym orbit upgrades?
@scooterstreetau Күн бұрын
Yes, have you seen our website. kzfaq.info/get/bejne/icxnlJh1rqqskX0.html&ab_channel=ScooterStreet
@ahmedsallam9702 2 күн бұрын
Sir can you tell me the required maintenance for this transmission.
@scooterstreetau Күн бұрын
Replace all worn parts.
@JPBrasca 2 күн бұрын
With this exaust added to a stock 2009 2 stroke bugeye yamaha zuma that has no upgrades, is there any necessary tuning to the bike in order to prevent damage to the engine or parts? I think I heard that whenever you do any mod, there needs to be some sort of tuning.
@scooterstreetau Күн бұрын
Yes, you MUST always tune the engine to suit any upgrade. MUST for carby jet, variator rollers, clutch.
@empireofsnoppskalle-rq3nv 2 күн бұрын
But my bike is almost stock and i had some problems, my dad bought a pod filter and instaled it (without me knowing) and it fixed the problem, it sounds cool and runs like its suposed to, its even a little faster then is was stock. only had to size upp once in carb jet, I have a AEROX 2014 2t
@scooterstreetau Күн бұрын
Nice work 👏
@joshmiller2446 2 күн бұрын
2 strokes be wing-dingin fun and fast, 4 strokers be all wuuuhgadugduh n can't get out of their own way...the smell of a 2 stroke with klotz oil is absolutely dreamy too 🥰
@scooterstreetau 2 күн бұрын
😆😆👍👍
@user-qg2xw1bo4q 2 күн бұрын
Hello sir i will be happy to answer i have a 2stroke honda dio zx but there is a problen when i turn it up from inside the exhaust the black oil comes out when i bite what is the problem
@scooterstreetau 2 күн бұрын
Check the oil pump system and the sprak plug. It could be due to excessive oil in the fuel mix. There may be low spark causing unburnt fuel. Check the spark plug and the spark test.
@user-qg2xw1bo4q 2 күн бұрын
@@scooterstreetau thanks sir it is possible that it is a ring and piston problem?
@scooterstreetau 2 күн бұрын
@@user-qg2xw1bo4q Yes, it is possible. Check the above first and then move to the cylinder.
@user-qg2xw1bo4q 2 күн бұрын
@@scooterstreetau 🙏
@hugglepot 2 күн бұрын
I have a Honda SH300, It's a full step through and just completed 36,000km. I have had it for 5 years and love it. My previous bikes were Honda CB900, Yamaha 550 Tenere & Honda XR600r.
@scooterstreetau 2 күн бұрын
We often hear this, Bike riders Loving their scooters, a true fan of 2 wheels.🏍️🛵
@realityrank8534 2 күн бұрын
When I had placed the crankshaft seals in the crank seized up, how would I go about making sure the crank doesn’t seize up?
@scooterstreetau 2 күн бұрын
Grease or oil the seals prior to inserting crank. The crank will feel resistance at first, over time it will settle. Ensure correct seal kit for the crank, use a good brand of seal.
@realityrank8534 2 күн бұрын
@@scooterstreetauAnd also what is wrong with the flywheel if it is wobbling and won’t spin in a straight line
@scooterstreetau Күн бұрын
@@realityrank8534 Is crank bent? Did you check it? Is the flywheel out of balance?
@paulbudford 3 күн бұрын
I love my small two strokes. In the U.K. Now you can't even buy a four stroke 50cc scooter from any of the big manufacturers. Only electric. 😔 And the range is terrible. It's Chinese or nothing if you want a ICE.
@scooterstreetau 3 күн бұрын
Great to see you are still tinkering👍Agree.
@xhovanguzhda1619 3 күн бұрын
Hello! I have a aprilia sr50 2010 and the carburator is flooded but it has jut a litle bit of gas arond it but it doesent leak and the performane is not decrased and the problem is with the electric choke because i bought a new one and it works a litle but not as it should. Can the flooded carburator be the problem? If its not wat can be the problem? Please help me!
@scooterstreetau 3 күн бұрын
The cause may be one of these: The fuel tap, thw carby gasket, the carby needle and float system, the oring on the adjustment screws.
@scarybeo 3 күн бұрын
4strokes under 150cc are dangerously slow. you are better off going electric over 4 stroke so you can atleast flow with traffic.
@scooterstreetau 3 күн бұрын
True.
@Ice-T. 4 күн бұрын
9:42 that, my Runner 50 was always on full throttle, 76 000km, and still have original cylinder an piston
@scooterstreetau 3 күн бұрын
Yep they love WOT. 76 K, Awesome🙌
@najdrazi_tatica 4 күн бұрын
Well i have Vespa PX-200 1987 never change even 1 motor component and still running like a girl,even spark plug is the same last 6 years and i am drive it almoust every day 😉
@Ice-T. 4 күн бұрын
A koliko kilometara si napravio? 😀
@najdrazi_tatica 4 күн бұрын
@@Ice-T. Ja sam je kupio prije 7 godina i sad ima nešto više od 30000km ali kad sam je kupio na satu je pisao 0 jel nije radio sat tako da neznam koliko je prije toga prošla a prošla je sigurno više nego ja otkako sam je kupio a to nije malo za dvotaktni motor jbga 😁
@Ice-T. 4 күн бұрын
@@najdrazi_tatica nije malo al nije ni puno 😀 Moj '09 Runner 50 ima 76kkm, s time da zadnje 3-4 sezone više stoji nego se vozi
@najdrazi_tatica 3 күн бұрын
@@Ice-T. Cuj ako se nije kvario onda je to velika stvar,ovaj hvali 4 taktne skutere kako su izdrzljivi ali sumnjam da ce se naci neki koji se nije pokvario s tolikom kilometražom kao što ti imaš ili sa ovolikim godinama kao što moja vespa ima 😉
@Ice-T. 3 күн бұрын
@@najdrazi_tatica ma vraga se nije kvario, pogodio me usran primjerak, nakon samo 800km me prvi put ostavio na cesti, nakon 5000km se počela raspadat mašina, sve u luftu, svugdje curi(a nisam bio od jučer u tome), koštao me taj skuter pun k novaca, hoćeš kvarova hoćeš održavanja, ali i dalje ga držim na životu
@colinblick8946 4 күн бұрын
Picked up my 2T some months ago , a Vespa 😎enjoying messing with it (tuning)…..it’s a 50cc….. so much fun…….always watch this channel I’m learning a lot … cheers guys😉👌🏽
@scooterstreetau 3 күн бұрын
Great to hear😁 thank you.
@js256scoast 4 күн бұрын
My 2t has just seized :( It ran out of oil but the oil lightt never came on? :(:(:(
@scooterstreetau 3 күн бұрын
Don't rely on that light. They need a warning light for when the warning light bulb fails.
@chrisdeegenaars1168 4 күн бұрын
Where are you located and what does a manual choke cost
@scooterstreetau 3 күн бұрын
Gold Coast, approx. $25.
@foreignautomobiles 4 күн бұрын
Can't beat the braaap braap of a 2t.
@scooterstreetau 3 күн бұрын
😆😆 you got it.
@projectclark123 4 күн бұрын
They are both good and fun 😊
@scooterstreetau 3 күн бұрын
Anything with an engine right!
@slof1983 4 күн бұрын
Hi do you know the dimensions of the original belt and roller weights on a aprilia sr50r 2015? Planning on upgrading but a lot of people are saying different things. I have an idea that the belt is 811x/18,5 is that right? And with the rollers does it matter what dimensions they have? Thanks!
@scooterstreetau 4 күн бұрын
Correct 811 x 18.5mm
@snipezpro9554 4 күн бұрын
mhr replica is steetrace. its 70* of the mhr pay that bit more for 30% more power
@sebastians6691 4 күн бұрын
Can i install it on my Aprilia sr50r carb? Everything is stock but i did remove the variator washer. Thanks
@scooterstreetau 4 күн бұрын
Yes you can.
@agnosticevolutionist3567 5 күн бұрын
Is this the 4 stroke or 2 strke zip 50
@scooterstreetau 5 күн бұрын
2T.
@agnosticevolutionist3567 5 күн бұрын
What part of Scotland are you from ,your ginger .with a very brawd Irish accent ,im from england .god knows what your saying
@scooterstreetau 5 күн бұрын
🤣🤣😂😂 you have a great sense of humour, I like it.
@DunjaIlic-vi8ei 5 күн бұрын
i drive a hyper2
@rynax009 5 күн бұрын
Does it have a GY6 engine?
@scooterstreetau 5 күн бұрын
No it is a 50cc 2 stroke. Like Honda Dio Vertical.
@eddietrujillo172 5 күн бұрын
But dude why u make the video too long by talking too much that u already say plus wen u said let get to it mean it and get to it and quit the talk man work and talk to show people better of what u mean thas why people don't progress they don't fallow good advice smfh
@scooterstreetau 5 күн бұрын
Ok we do that in our next Video, Thank you Brother🫡
@official_r41n54 6 күн бұрын
What mods would you use for a lexmoto diablo 125 E4
@scooterstreetau 6 күн бұрын
Exhaust, carby, variator, clutch big bore kit.
@official_r41n54 6 күн бұрын
@@scooterstreetau could you do a video on the recommended parts and brands, I been looking but have found much just generic 150cc big bore kits
@scooterstreetau 5 күн бұрын
@@official_r41n54 These parts are very cheap and numerous, you can buy them from eBay and many Chinese scooter websites.
@frazenin9637 6 күн бұрын
Hey man I was wondering what fuel oil mixture premix for a euro 2 piaggio typhoon 50cc I have the following installed : Mhr replica kit 20.5 mil delorto carby Yasuni r Super compression crank And help on this would help me out heaps
@scooterstreetau 6 күн бұрын
Start at 30:1 and lean off as required.
@frazenin9637 5 күн бұрын
@@scooterstreetau how many tanks do I run 30:1 and then what do I lean it off too ? Thanks heaps for getting back to me 👍
@scooterstreetau 5 күн бұрын
@@frazenin9637 Check the plug on a regular basis, monitor how the engine is performing. Have you disenegaged the oil pump?
@frazenin9637 3 күн бұрын
@@scooterstreetau yes I have and removed the oil tank
@ab.3800 7 күн бұрын
no sticker?
@scooterstreetau 7 күн бұрын
🙈
@sebastianbohac2623 7 күн бұрын
Hi can u make video what to know it i want to make tuning brakes And more pls
@marcvanderdeure5386 8 күн бұрын
Does destricting the silencer do anything to the performance or is that just sound
@scooterstreetau 8 күн бұрын
Yes it Derestricts the exhaust. if you want the scooter restricted in power leave it as a standard scooter. If you want more power,derstrict all restrictions including exhaust.
@kristiqniliev3050 8 күн бұрын
What about malaguti f12 and yamaha jog rr are they good for tuning?
@scooterstreetau 8 күн бұрын
They are perfect for tuning.
@antonywragg2756 9 күн бұрын
Great video guys, im just about to tune a zip myself, did you guys remove the restriction from the exhaust on this setup?
@scooterstreetau 9 күн бұрын
Tahnk you👍Yes.
@ommeinaaa 9 күн бұрын
the thing you took out can you just take out the thing with paper idk whats it is in english
@scooterstreetau 8 күн бұрын
We removed the shaft.
@peterepeat7066 9 күн бұрын
Excellent video thank you, are the oil pumps serviceable I have a sym jolie 50cc again thanks for your informative video
@scooterstreetau 9 күн бұрын
Unfortunatley replacing the o'ring is unsuccessful, the pump will continue to leak. Replacement seems best option to date.
@peterepeat7066 9 күн бұрын
Just tuned in and subscribed thanks for the very good, informative video. I've got a Sym Jolie scooter where would you recommend I buy my bots from from Australia I want to support the local suppliers so any advice would be greatly appreciated. Thanks again for the vids
@scooterstreetau 8 күн бұрын
We appreciate the SUB, thanks. Send us an email and we can supply the parts for you. www.scooterstreet.com.au
@titasjon7122 11 күн бұрын
Hey im planning on upgrading my cvt with the poloni hi speed minarelli kit or the malossi mhr 2000 kit which should i choose? And if i upgrade my carb from a 12mm to a 17.5mm does my top speed increase by a lot?
@titasjon7122 11 күн бұрын
Btw my moped is a yamaha aerox 2016m. 2T
@scooterstreetau 10 күн бұрын
@@titasjon7122 Go with the best value, the kits are very similar and both work very well on the Aerox. I would lean toward the Popo.
@bern585 11 күн бұрын
A friend tightened mine incorrectly, the fan shattered, shredded the belt and then the crankshaft developed a wobble 😢
@scooterstreetau 11 күн бұрын
Oh nooooo
@numankralj 11 күн бұрын
Why does my Piaggio zip 2T 2016 model starts to accelerate the first 10 seconds when turned on?
@scooterstreetau 11 күн бұрын
Auto choke.
@youtubeslof8512 11 күн бұрын
Hello again. i pulled the Variator washer and i feel like the moped has more to give so my question is should i change variator weights? And if so do i have to change anything else in the scooter?
@scooterstreetau 8 күн бұрын
Yes try a lighter weight, 7 grams.
@Rayen-Abid 13 күн бұрын
Hi i have a scooter with a stage 6 engine and a 22mm carburetor and a normal belt not the oversized one . I want to change the gear box so what is the best ratio for that and did can i buy the primary without the secondary? Thank u for reading 😊
@scooterstreetau 12 күн бұрын
You will need to see what is available for your scooter model.
@volmoore1899 14 күн бұрын
This is a very informative video. I now know how this works. Is this available in the USA.
@scooterstreetau 14 күн бұрын
Thank you, yes it would be available in the USA. Search local scooter part suppliers.
@simeonsu 15 күн бұрын
Hey i need help. Im planning on buying a final drive upgear kit for my piaggio but im unsure if the one i buy actually will fit becauce its an old engine. I think its a 1995 piaggio NRG. Please help😊
@scooterstreetau 15 күн бұрын
You need to find the parts that fit your model. Search all of the manufacturers and the parts sellers in your area.
@delallish123 15 күн бұрын
Should I go with stage6 racing mk2 or sport pro mk2 70cc for my jog r (AC)? I would use the scooter almost daily now over the summer, both for just stunting but also sometimes taking longer "roadtrips" (most likely not more than like 60km each way). Another thing I really want is to be able to "power wheelie", by that I mean the scooter wheeling by only giving gas (at low speeds ofc) which I am not sure that the sport pro mk2 will do? What do you guys think?
@scooterstreetau 15 күн бұрын
Go for the racing, it will be so much fun but remeber you should fit compatible parts with this cylinder. Exhaust, transmission, carby.... If you want reliablity go the Sport kit, lean back and the JOG will wheelie for both.
@delallish123 15 күн бұрын
@@scooterstreetau I’m planning on going 21mm carb, c16/21 depending on what cylinder and then some variatorkit and stage6 clutch, I might go with the racing then, tho I really want to good reliability too, as I want to be able to ride often
@scooterstreetau 15 күн бұрын
@@delallish123 Wow this will be a beast🚀
@delallish123 14 күн бұрын
@@scooterstreetau Yeah I hope so too, hopefully the reliability will be good as well. I live in sweden so a stage6 racing mk2 is like a mediocre cylinder haha, lots of people go with 77cc+, but this will hopefully be good aswell
@scooterstreetau 14 күн бұрын
@@delallish123 Best of luck👌👌
@KlevisGuzhda 15 күн бұрын
Hello.I have a aprilia sr50r and when i only give it gas the variator makes a sound but in idle it dosent and it makes a noise when i turn it on the right too.What can be the problem?
@scooterstreetau 15 күн бұрын
Check the kick starter shaft, it may be loose and it can be removed or use a hard plastic spacing washer.
@KlevisGuzhda 10 күн бұрын
@@scooterstreetau can you please make a video on that
@scooterstreetau 10 күн бұрын
@@KlevisGuzhda Sure can, email us direct for video request👍
@123Ansido-uf1nv 15 күн бұрын
I changed the auto choke with a brand new one and it works but not as it shoulds
@scooterstreetau 15 күн бұрын
Thiat would be confusing, check the choke and check the carb settings, you may have anther issue.
@aiiiiiiiiiiiiiiiiii 16 күн бұрын
Hey, I have a SRMT50cc ant the mods are : Leo vince TT exhaust, 4.8 g rollers, red springs and a malossi air filter. What size jet should I use?
@scooterstreetau 15 күн бұрын
Change the jet once the engine is warm, increase jet so the carburetion is spluttery then jet down until it cleans up when throttling.
@aiiiiiiiiiiiiiiiiii 15 күн бұрын
@@scooterstreetau yeah but what size jet should I use?
@aiiiiiiiiiiiiiiiiii 15 күн бұрын
@@scooterstreetau change the jet to what size?
@scooterstreetau 14 күн бұрын
@@aiiiiiiiiiiiiiiiiii what is the current size?
@scooterstreetau 14 күн бұрын
@@aiiiiiiiiiiiiiiiiii what size is in now?