Exhaust Trim Ring Install Technique, Get it Right EVERYTIME: Tech Tip Tuesday

No video

Exhaust Trim Ring Install Technique, Get it Right EVERYTIME: Tech Tip Tuesday

Рет қаралды 22,151

4 жыл бұрын

Few things are more frustrating than cutting a hole in the wrong location for everyone to see or having to have a body panel repainted due to missing on where your bullhorn or side exhaust.
This video shows technique for installing Motion Raceworks Exhaust Trim Rings so that you can have some room for error and still nail the install!
Shop trim rings at Motion Raceworks below. Available in stainless steel bare and black anodized aluminum. Exhaust sizes 3" all the way to 5"
www.motionrace...

Пікірлер: 37

@saintstrimandpaintinc.3274 4 жыл бұрын

When using a hole saw on material that is uneven like that run it backwards to get a groove. It helps it be a little less jumpy and not grab and jerk.

@MotionRaceworksOfficial 4 жыл бұрын

Saint's Trim and Paint Inc. good tip!

@noampitlik2332 Жыл бұрын

You have that correct about so many of those bezels: gawdy!

@gmangasco6700 3 жыл бұрын

I wish I had enough money to buy everything for my car that you guys make motion makes awesome products I think

@rabarbosa62754 4 жыл бұрын

Thanks for today’s tech tip! Good information for use down the road. ✌️

@tomhanson329 3 жыл бұрын

This was a great video. It's definitely knowledge I will be able to use in the future.

@9thGenerationCajun 2 жыл бұрын

Awesome I just saw a add for these on Facebook, I need one for my side dump on my truck. Hell yeah brother

@yankey4 4 жыл бұрын

Dug You sir are the man. Love what you guys do. Love how you make videos that make us feel like part of the fam. Thanks for that brother. God Bless.

@MotionRaceworksOfficial 4 жыл бұрын

No, thank you for supporting us. Means the world to the Motion fam!

@lsxtmt4910 4 жыл бұрын

Didnt we see this already?

@MotionRaceworksOfficial 4 жыл бұрын

LSX T MT yes, we didn’t make it near as in depth tho.

@onekilogaming7721 4 жыл бұрын

I was thinking the same thing

@niyashsookra5089 4 жыл бұрын

Fire content

@rmxrider20032000 4 жыл бұрын

Yeah, deja vu.

@ricklinehan7176 4 жыл бұрын

It was during the build work video but this is a good way to call it out as a tech tip to make it easier for people to find in the future. Good work as always.

@Stinow 11 ай бұрын

Great video! Also working on a side exhaust a.t.m. only on rear end of my car. Do I have to put like a heat shield on the inside or outside where the exhaust is coming through the bumper?

@canklehater 4 жыл бұрын

How this channel doesn't have a much bigger following is absolutely beyond me.seems completely ridiculous.

@mage2404 4 жыл бұрын

Quality takes time 😁👊🏁🇺🇸

@kyleallen3857 3 жыл бұрын

Don’t you hate it when people nit pick your videos? Here goes. Even easier if you use rolled up heavy butchers paper stuck inside of the down pipe and extended out. Will land exactly where the extended pipe will. Run hole saw in reverse Trim rings would be cooler if they were sized to the hole saw and had a lip that extended into the cut hole to cover the nasty cut edge..

@earlholyoak12 4 жыл бұрын

I love these videos

@noampitlik2332 Жыл бұрын

How much movement is there with the pipe tip, where it protrudes? I guess it depends on the flexibility of the motor mount.

@Zaucey 4 жыл бұрын

Very very detailed. This is the best video I have ever watched on this subject. I’m one of those damn Honda boys so I’d like to see some hood exit stuff too

@coachb7373 7 ай бұрын

What if u have a 5” down pipe and the biggest one u make is 5”???

@lazarikthompson2892 3 жыл бұрын

You should do window latches for drag racing cars with Lexan windows

@Very_Angry_Citizen 4 жыл бұрын

You fuckers ROCK!

@clickclkboom 4 жыл бұрын

Repost?

@eladiotorres7804 3 жыл бұрын

What size bezel do I need if I run 3inch pipe ? A 3.5 or

@eladiotorres7804 3 жыл бұрын

I’m going to be using the ict billet round bezel from summit racing but just wondering about the size

@swatson0061 3 жыл бұрын

Im a factory appearance guy also.

@martingatavaski1351 4 жыл бұрын

I HOPE u Header Wrap that Downpipe

@speedfreaksracing7361 4 жыл бұрын

U gota work slow on cars if u wanna go fast

@robgershman3886 4 жыл бұрын

What Alternator bracket are you running on this engine?

@MotionRaceworksOfficial 4 жыл бұрын

It’s a new prototype piece we are getting ready to release

@robgershman3886 4 жыл бұрын

Motion Raceworks Official with the 3D printed bottom bracket I figured that was the case. Im trying to run the cheap flowtech headers in the “down and forward” orientation. Any chance your prototype (once it hit the market) would work with a turbo header in that configuration?

@MotionRaceworksOfficial 4 жыл бұрын

I believe so. I’ll mock it up Monday and let you know!

@robgershman3886 4 жыл бұрын

Motion Raceworks Official you guys are awesome!!!