You can slow down the video

Your feedback is valuable and we appreciate your honesty.

So glad that it works!! ❤❤

I simply bought some 3 core .50mm cable, cut the cable and added about 3 MTRS to bring it inside my caravan , very easy to do took me 20 mjnutes , but I'm sure there's one out the somewhere .

It alters the in built temperature room sensor so for example it's showing your room is 23 degrees but you got a proper thermo that shows it's really 21 then you set it to -2 then it will be allegedly correct.

F,7 is to show what pump you have connected to the heater

No such place in these I’ve heard of. They used the term “smart” a little loosely in this case.

@@TheMajictechPity its not there like the standard Chinese heaters have with code 1688. These 2kw heaters are set to 1.5hz and about 2300rpm lowest setting from factory . They can be manually tuned lower once running and up to temp then turned tuned down while running to run clean and hot at 0.8hz 1700-1800rpm more suited to background heating and using much less fuel they just struggle to start up at the lower setting so turn setting back up to factory for starting. 👍

Hi, can you confirm if the other diesel heaters are from Hcalory, as they are typically sold as a set? And please email us hcalory@hcalory.com for more details

@@hcalory8706 the “other diesel heaters” I am referring to are not Hcalory. These are ones I have installed previously on other projects using the “blue style” controller which has a 12v or 24v setting. I purchased the model in this video most recently for my latest project and I plan to use a 24 volt system. Can I use 24v on this model or will I need a voltage reducer.

yep, swap board, re-pin and it works

Highland mode operation Press and hold "*" + "ok" keys at the same time for 2s to enter plateau mode, and the icon "mountain peak" will show to start plateau mode. In the plateau mode, the wind and oil ratio is reduced to adapt to the lack of oxygen in the plateau, and then press and hold "*" + "ok" key for 2s to exit the plateau mode. Hope this can solve your problem, if your problem can't be solved, please seek help from professional customer service: 👇Service Guide 👇Service Guide 👉If you need product information and after-sales service, please send an email for professional customer service help! customer support: hcalory@ hcalory.com

@@hcalory8706 There is no "*" and there is no "OK" on this model. Please give us the correct instructions.

@@MattDavey68did you figure out how to change to Alpine mode with this controller? Like you said have no idea what they are talking about with “.” and Ok button.

@@Mrv1960 There is no alpine mode. No altitude mode no other setting available.

Engineering mode En06 setting is for altitude, but there is no way to change this. The logical way would be pressing the wheel like when entering the correct time in the basic settings (F0). But En06 just stays at sea level, unable to change it

Mine does not hold the correct time it is useless at doing that.

It’s actually on f8 now. These guys don’t give a damn until their sales plummet. Nothing on this heater works as it should. Hcalory has the same garbage controllers now. They suck. . . . They won’t even throttle up enough to properly warm a small space.

Highland mode operation Press and hold "*" + "ok" keys at the same time for 2s to enter plateau mode, and the icon "mountain peak" will show to start plateau mode. In the plateau mode, the wind and oil ratio is reduced to adapt to the lack of oxygen in the plateau, and then press and hold "*" + "ok" key for 2s to exit the plateau mode. Hope this can solve your problem, if your problem can't be solved, please seek help from professional customer service: 👇Service Guide 👇Service Guide 👉If you need product information and after-sales service, please send an email for professional customer service help! customer support: hcalory@ hcalory.com

This didn't work for me, shows 11 ble Instead

Yes how the hell is this not in the settings????

because Celsius is the world standard 😅

Welcome in the 21th century, we use C°

I also want freedom units of measurement 🇺🇸

@@BB.0101 and ponds & yards 😆

Yep smart setting does not work it sucks, I use mine in level mode only, to be honest it works excellent heating a static caravan with a room size of 3.6 X 6 MTRS

I agree, its awful. Even the dirt cheap other makes do it properly.

Give it a try again now with the updated app. I had the same issue in the Galaxy S23 but recently retested the app and its working now for bluetooth features.

You can't!