ExpressLRS Tips and Tricks

ExpressLRS Tips and Tricks | BEST SETTINGS

Рет қаралды 8,322

Күн бұрын

Thanks for Watching !
How to Bind ELRS: • Five33 RTF Drone Exper...
Radiomaster ELRS TX: www.getfpv.com/radiomaster-ra...
HappyModel ELRS TX: www.getfpv.com/happymodel-exp...
Recommended ELRS Receiver: flyfive33.com/collections/hap...
Support this channel by shopping at FlyFive33.com

Пікірлер: 81

@lr7974 9 ай бұрын

ELRS telemetry will always consume a certain amount of time domain slots (packets). The ratio 1:128 means that 1 out of 128 packets is a telemetry packet so when telemetry is sent RC data is delayed for that 1 telemetry packet that is sent. With Race telemetry since when you're armed and no telemetry is being sent you aren't missing any RC packets since telemetry is not being sent.

@headsupfpv 9 ай бұрын

This is fascinating, thank you!

@modquad18 9 ай бұрын

So in Race mode, no battery voltage in your OSD?

@P-Bee 9 ай бұрын

@@modquad18 No, in race mode you would have no telemetry back to your transmitter. So if you have you tx set to shout at you when you reach low battery, then that won't work. Your OSD is created on the flight controller so that will not be affected.

@modquad18 9 ай бұрын

@@P-Bee Great info, thank you!

@JustinHunnicutt 9 ай бұрын

The rc data isn't delayed for 1 packet, it's skipped for 1 packet. Otherwise latency would change and the next packet would be skipped. I know that really doesn't change anything significant. Also I think race mode also does away with sync packets so even less skipped packets. Great explanation though.

@SupaflyFPV 9 ай бұрын

250Hz or 500Hz is ideal for Freestyle (LoRa)-sub 5ms latency is super low and has great range. 50Hz-100Hz would be best for long range. Betaflight has a well engineered RC Smoothing which will filter the incoming packets according to the rate - so a low rate will not mean any jolts in the data - it will mean more filtering is applied automatically (and adds a bit to the latency of the packet rate). Thanks for the video and insights.

@maxd5491 5 ай бұрын

What is the best for flying behind buildings and trough buildings you know ?

@XquadFPV Ай бұрын

Great video, straight to the spot with good info. Thanks guys! :)

@nickvledder 4 ай бұрын

Great video! For freestyle I use 250mW 150Hz both for RadioMaster RP1/ RP2, giving me plenty of range. Also for the ceramic antenna.

@RyanQuellet 9 ай бұрын

Didnt know about race telemetry setting. Thanks!

@mu7095 9 ай бұрын

Thank you, helps to demystify things, much appreciated!

@canyoncastaldi7027 8 ай бұрын

Thank you so much finally a helpful video on elrs settings!

@ndcapper 9 ай бұрын

Great video. Thanks guys

@Noical 9 ай бұрын

Nice video Evan we love it

@lemonsquareFPV 9 ай бұрын

Probe lens 533 temperature was a great shot! Great video!

@headsupfpv 9 ай бұрын

Armando Is a wiz with that probe lens!

@DanielBarrios83 9 ай бұрын

Man such a cool video!!! Thanks

@h2o40fpv 9 ай бұрын

Wow great tips thank you .

@richardamiss7000 2 ай бұрын

Your dude is cycle testing those switches when he's nervous

@windwalkerfpv 9 ай бұрын

Really useful, thank you 🤙.

@KOrnhOliO1 9 ай бұрын

Please also go over easiest and quickest way to update and then flash your new gear. Thanks! Great video! 😎🤘

@KABAMFPV 9 ай бұрын

Great video! Makes more sense now lol. I didn’t really know how that worked. 😂

@TavoFourSeven 9 ай бұрын

Perfect coming from x9lite and xmplus to RM pocket and not having a clue but It works well enough. Gotta figure out my dbm and crap but that pocket is fine fr. I strictly pinch I think and how they don't have long switches anywhere, but all the buttons on the thicc top. I'm digging it.

@propabilityfpv 9 ай бұрын

Switched to ELRS about 6 months ago from FrSky R9. Its so much better, It was like being able to see in color for the first time 😅

@jana171 9 ай бұрын

Love the video, but could you please run it through some motion steady software of sorts :-)

@headsupfpv 9 ай бұрын

Lol! I’ll work on it!

@scottstevens7569 2 ай бұрын

Ya, that was brutal

@GlobalSourcing 9 ай бұрын

Hey your vlog style is getting really good, appreciate the content! A suggestion, I really recommend running stabilization and using a stick to lift the perspective up. This keeps the camera up towards your eyeline and stops a lot of the wiggles.

@headsupfpv 9 ай бұрын

Thanks! Just ordered a stick/tripod to get the camera , and gonna try to be more stead 😅

@jansen_fpv 9 ай бұрын

ELRS for the win.

@DanielCValot 10 күн бұрын

What wold you recomend for thoes of us who fly on the slope? Lets say 1/2 mile at the most, line of sight. I have the radio master tx16s and the zorro 4in1/ELRS using the Nano modules on both. The planes are using Ail, Rud, Flaps and Elevator I would really like yourthoughts if you have time Thank you, Daniel

@CarlosRodriguez-vg2ob 16 күн бұрын

so do you have a video as awesome as this one for the regular flyers trying to get the best ranges possible (no racing)

@saberwulfSC 9 ай бұрын

Great video! How about a video on setup and flashing from right out of the box for those who know nothing about open source tx/rx. Thanks

@headsupfpv 9 ай бұрын

Sounds like a great video to me!

@modquad18 9 ай бұрын

Not gonna cover the BF ELRS presets?!?

@headsupfpv 9 ай бұрын

This was ELRS radio specific, will plan to do a more beta flight centered version soon!

@mikebergman1817 9 ай бұрын

Who is that single thumb down?! Is that you Trappy?? 😆

@fpvch 9 ай бұрын

LET’S GO CHAUS!

@ijallampatta 4 ай бұрын

is 921k bautrate enough for d500?

@LockJawFPV 7 ай бұрын

Vrap on brother

@speedy0_FPV 9 ай бұрын

i dont fly elrs, but still enjoyed it

@speedy0_FPV 9 ай бұрын

@@Tensentities no money for that haha, just switched to hdz, tracer is good enough for me

@CatzRuleZWorld 9 ай бұрын

You need wide switch mode for dynamic power

@strattonford2557 9 ай бұрын

I wish i could get into this. As a daily 107 professional FPV pilot, i still use crossfire for everything. Not willing to sacrifice the reliability for a margin of performance improvement. This will definitely help with my racing builds though!

@headsupfpv 9 ай бұрын

Crossfire is awesome, and it just works ! ERLS certainly has some cool features, but cannot beat crossfire for reliability and ease of use.

@strattonford2557 9 ай бұрын

@@headsupfpv if I was still in the racing/freestyle game I would be so into this!!! FAA reps are out in the wild now. They randomly approach us and will weigh/inspect the quad under certain situations. Unfortunately I cannot justify ELRS as a "suitable" for any professional (107 operation OR flying over people cat 1).

@jlarson42 9 ай бұрын

Very interesting and informative video. Thanks for sharing. 😎

@M-H433 9 ай бұрын

Loved the video thanks for posting it.

@divingfalconfpv4602 9 ай бұрын

My crossfire broke and everything out of stock

@_bdub_ 9 ай бұрын

Do we turn on telemetry in BF snd then use race telem on the elrs tx?

@headsupfpv 9 ай бұрын

Will do a video on this !

@RookieRay 9 ай бұрын

Hi how does polling rate on gimbals work with your TX rate?

@JoshuaBardwell 9 ай бұрын

In edgetx polling rate is synced to packet rate. I think.

@RookieRay 9 ай бұрын

@@JoshuaBardwell with a maximum gimbal pole rate of 500hz? Wonder what happens when eLRS is set to 1000Hz

@thestorey 9 ай бұрын

Hey it's cletus Mcfarland

@dimonik12 9 ай бұрын

Best tip for ELRS I got was changing Betaflight OSD settings from RSSI % to RSSI -DB and LQ then setting the warning to +10DB from the number in the LUA, (250hz -108DB = -98DB in CLI) and just switching off the warnings on the radio. ELRS without anybody shouting about RSSI Critical 😎

@modquad18 9 ай бұрын

Could you share the cli syntax?

@dimonik12 9 ай бұрын

@@modquad18 I think I got it from a JB vid, but basically you set the RSSI -DB as an OSD element for your own visual ref (replace RSSI%) then "Get osd_ " should show the "set" line you need it is an OSD warning element so the same element that does batt etc warnings. Set osd_.... it should appear and be obvious,

@dimonik12 9 ай бұрын

@@modquad18 set osd_rssi_dbm_alarm=(-10DB of min BD in ELRS LUA)

@modquad18 9 ай бұрын

@@dimonik12 Cool, thanks!