Meant to mention an interesting factoid. When weighing the stock EXB chassis vs M2C Racing, I found M2C only added about 75g of weight 👀. Stock weighed 1076g. M2C was 1152g. 🍻😎💪👊👊

Cats take lessons from Rich on how to land upright 😎🇺🇸

you are the best I have seen in the Rich discipline !! 👍🏻 great video great driving as always.

Sooper Doops at it again! Those triple back flips man. Like wow. Yeah RPM needs to redesign those arms so we can use the droop screws. Awesome bash as always. You rule, and in my opinion, you are the most consistent person I see on youtube bashing these rigs. 🤙☝️🦾

Picked up one of these and went to a 1/10th scale track. Broke the right lower front a arm and cracked the upper left front a arm. Ordered the RPM arms, so hopefully they hold up. And yes, my driving skills need a lot of improvement. Not used to this scale. However, it is a fun vehicle. No regrets.

I'm really liking the RPM arms on my Outcast rig, just had to rig up some limiting straps out of paracord to make up for the lack of droop screws

Killer vid Brother Rich!👊 Getting her to real "Extreme" bash worthy!😱🤣The EXB links and other touches they did paired with the M2C beef makes a unstoppable rig for sure! I added the EXB bits to mine, bumper, tires and links. Made a HUGE overall difference paired with the already M2C'd rig!💪💪Just put RPM arms on the rear of mine. Worried about the droop screw situation but like you said, at least you get full travel and workout from the shocks.👌Killer sends and loved the triple!🥰M2C shafts are going to be legendary once dialed! Bash on bro!😎👊💪🚀🚀

Way better channel than RC sparks, dude has over 3 million subscribers. He use to actually do RC cars now he plays in the dirt digging for gold. Glad to find a channel that is straight RC cars.

Mate, you make that thing look like a 6s. I can't believe how you can just launch that thing and get it to land so perfectly. It's really an amazing machine to be able to jump that far and be so agile, it really is a superb example of what a great design the Arrma 8s models are. The M2C stuff is such great quality and the fitment is spot on, I've got the blocks all round and motor mount with the chassis on my k8s and it is such a beautiful build, just waiting for the exb rear turnbuckles to arrive in stock in Australia. Great inspirational driving and awesome video mate!

Man iv seen so many of your videos and wow man you really put this to a sport limit and skill argument of what is possible with physics

The sound of the tires is awesome "asmr"

Sup Rich That send at 3:53 off the big mound 😱😱🚀🚀 Good lord Great stuff my friend

Effortless! Love your vid and of course the durability tests you put on these vehicles with the M2C parts! Will be ordering parts for the typhon 6s and the BR! 🍻

SUPERMAN! Back at it!!!

Nice Brother Rch 🍻🤜😀, definitely a pretty beast, with M2C Racing and RPM upgrades it is really very robust 💪💪, as always crazy jumps, really loved that triple backflipe that corrected frontflip in the air 😁😁👍 Take care my friend and have a good bash 🤝😀

Yeah no droop points may play a part with rod end damage but only time will tell🤞 awesome bash as always man! Oh and good news, after 6+ months on backorder I finally got my 6s EXB, 1 bash and it's my new favourite💪😂🤘

Damn brother!!! That big rig is so beautiful and just flies so nice 🥰🥰 The hiking trail footage was a nice additive as well, 👌👌

That thing is like a lawn mower on them hills. Nice truck . Beautiful sends. . Awesome content

Don't know how you and a Cat land upright almost perfectly but I do enjoy it. What a beast that thing is.

Dude ends up in some crazy angles and still manages to land out. Man can definitely drive the wheels off these things!

Waiting for those M2C shafts since I can't stop landing on one wheel 😂😅. Epic bash as usual my friend 👍👍👍👍👍

Dude. Epic bash as always! I was digging that monster burnout! Thanks for posting and Shout-outs!

The drive shafts seem killer I can't wait for them to available. I feel like I've said this before but that spot with the 2 big mounds really does look like an absolute blast. Such a brute she really did take some awesome sends. I almost forget I'm seeing the 8s experience not the 6s pulling off so many backflips and so smoothly. BTW speaking of smooth that was awesome save when it was kinda wonky in the air. I would still love mitch to put out an attachment for the chassis to run rpm arms n have some sort of droop setting. I'm still thinking a strap limiter might be my best bet. Thank you for a super fun and awesome video man. She's truly dialed in 🍻🍻🍻🍻🍻🍻

That K8S is a beast! Keep it up rich!

Another killer run with K8S EXB Bro Rich. Good call on the M2C chassis. Excited to know those M2C driveshafts are doing well thru your abuse so far. nailed that triplets beautifully. Glad you caught those rocks jammers LOL 🤣. Sucks on the turnbuckle snappage. Wicked senders as always man.. another killer test for sure.

Wow that's thing is definitely rich and Eric bashed approved. She such a sweet rig you got. If I ever go 8S that's the one il get.

Wow nice vehicle & bashing bro👍🧡

The way that thing flies through the air it makes sense that it sounds like a jet engine coming up to the jump. I replayed one of them and shut my eyes and it sounded just like a frikin aeroplane!

Awesome bashing brother and great video. The k8 exb is definitely a tank thanks for inspiring me to by mine.

You built the king of 1/5th scales right here.

That thing actually flys ... great vid Great footage Awesome info , you got it all bud

Nice video brother 👍 upgrades are definitely a plus for rc she took it like a champ 💪 sick bash 👊

Definitely a sick build 👍👍 and u have the best vids on U-T 👍👍

What a beast! Love it. Great mods and some super serious airborne antics. 👍🤪👍

Sick triple. I would love to have a spot like that. Way too many trees around here on anything that's not flat. I finally got my rig to the point where it's only bending CVDs. RPM arms are way too flexible, but they can take some wicket abuse. Def gonna get the shafts. Even if they last one more run than stock, they're worth it - since the stockers can't even last one run . . .

A rich I started running the rpm arms on mind and I did start having problems with it popping rod ends so I made a the set of small limiting straps to set the droop on my truck. I had some quarter inch wide strap material and they seemed to be working really well just my 2 cents

Plain simple OUTSTANDING sessiln dear brother, to wake up to this 5 52am made ma day. Took some serious beating 🥰🥰❤❤❤❤❤

Big dawg right there. Love anything m2c

Can't wait for those m2c drive shafts!!!

Rad Rich! Killin' it again brother! Thanks so much for all the pointers, tips, and tricks! Super stoked for the driveshafts from M2C! I've sheared off the cross pins on two of my CVD driveshafts on the 8s EXb so far... not sure if this is a design flaw or a bad batch of shafts. I've contacted H H for some replacements. Still waiting on that... Thanks again for the excellent vids dude, keep up the great work! BTW have you had any problems with the cross pins, or are you just bending these driveshafts? Anyone else in the comments having probs with the cross pins as well? I am running the HW 800kv Max5 combo with the same diff weights as Rich is, except 300k in the rear. Thanks!

Killed it Rich, so impressive

Another amazing bash wow!!!

Good to see you back at it Rich. I am amazed at how solid these m2c chassis are. Such a great piece for the arrma line. Im curious what your take on the rpm is in the long run.

Another amazing video. The RPM arms don't have grub screw place or don't mach with the m2c chassis? I think limit the travel of the shocks prevent wear on those.

Bro for the weight this thing Flys and For its size as long as you land decent takes a beating. The new location doesn't have to many rocks to worry about. Most the spots rocks 🪨 are a killer for us lol. M2c for the win

Oh yeah you could put some droop springs in like crawlers to get your droop back. . Pen spring mod

awesome bashing,have a great weekend brother

Joe Lagano from nascar could use a driving lesson after today!😲Crazy air attacks once again! Love it! IRP Steel Racing Rod End Set for HPI Baja 5B/5T - tr334 Would these fit? I don't think you'll break those if they work.

Awesome jumps bro 👌🙌

Rich I had another question for you as you know I am looking into building out a 1/8 EXB myself from all my million other questions I have asked you so far LOL. How is it you wire up the batteries to the ESC when you end up using 2 packs? Since I know if you are able to run a single pack i.e. 6S, 4S, etc it is easy since you just have the 2 wires from the ESC with the single connector on it. But if you are running 6S or 8S and have to use multiple packs to how it is you connect the two batteries to the ESC if there is only a single connector there? I am have not seen a setup in person where I could just look and see how it is done. Only thing I picked up is in those instances there is a loopback adapter you need to use when you only use one battery instead of two.

Shock limiting straps needed. 👍

Epic rich just epic lol I’m glad you do this makes me smile every time .

Right on brother! SEND ITTTT☆!

Hey Rich, great video as always. Have you ever considered internal shock limiters to reduce droop with RPM arms?

Nice doubles Rich! Not sure what's up with the design on those RPM arms 👀 The M2C driveshafts look niiiiccceee 👌👌

Beautiful exb Car 🤩

Looking good air time as usual mate 🤣😅 👍👍🤙

😮 Gravity? What Gravity? 😮 Killer ripping as always 👏. RPM did not good with the design of the arms 👎, it's just a shock rod end killer and hard on the shock piston all the time. They should know better that the hard basher needs that feature. AWESOME that M2C now makes these long turning pieces like drive shafts 👍👍👍 The extra weight from the M2C Chassis is worth it, girls like a little extra weight at the right spots even when overall less weight is always better. Bash on! 😘😘😘

Thumb up number 8..Great video bash killer💪🏻

Man it's such a small space between the arm and driveshaft even on the 6s models. That should be addressed but that means a whole new rear end design most likely. Does M2c make the driveshafts for the 6s? Great bash Rich! Have a great weekend!

Stick 5mm of fuel tubing under then end of the pistons - should help!

Hi Rich. Does no one do aluminum A arms because they need to have some flex or because it would be too heavy or both or something else? Thanks brother 👊🏼 🍻

quick question... is running silicon earplugs in the center diff ok to do with nothing else but the ear plug? does it provide enough lubrication on its own, to keep the diff from over heating? For example, behind the planetary gear, pretty sure none of the earplug gets behind it, can this overheat and create an issue... or am I fine?

Another awesome vid Rich. Love those RPM arms bro, got them on my 6S rig. Nice driveshafts too man. Is Mitch also working on a set for the 6S rigs? I threw a pin out of the diff side of my rear driveshaft on my last bash. Just pressed a ground down 3mm allen key into it today and seems to be good. Just saw that you have no covers over your shock rods. Aren’t they getting blasted with the rocks and grit coming off the front wheels? Lookin forward to the next vid brother. 😃👍🏼

Nice car man not as brave as you wid d launching just got mine

Rich Duperbash , dude you make those jumps looks easy stuff. Do you should up open a bashing school.

Damn, tearing it up rich, its scare how heavy the chassis is, about twice to 3 times what mine does on the reeper, killer video though

I wanted to ask, could you not use the EXB Rear Lower Chassis Brace (ARA320597) with the M2C chassis? I am very interested in getting this chassis but not sure how I feel about not getting rid of that brace.

What are you using for you from bumper?

Are the new shaft 7075 aluminum Excellent videos Duper

U make it look easy dawg,I can pull off some doubles but those triples are wild hahahah

Confusion regarding running 20mil diff fluid combined with silicon ear plugs... are the plugs being put in to thicken it up even more... somebody told me once that 20mil diff fluid is thicker than silicon ear plugs... but I'm not sure. If one were to run 100% silicon ear plugs in the center diff, what would be the equivalent cst, or mill rating? Also... just in general, what is the benefit fo running thicker material (such as silicon plugs) in the center diff, as apposed to 500k or 1 mill?

Are there any issues with fitting the rpm arms? Do the sway bars and shock ends go into them fine?

Most insane vids on KZfaq!

Hey rich.. Do u approve of rpm arms on the kraton 8s v2 because there are ppl like u that bash hard with stock and I go out & in 20 mins of proper landing perfect I snap arms every outing. Maybe im doing something wrong?

Whole vid was great! But I especially love the beginning. 😊 I often take my Arrma rigs on nature "walks" with me down by the river to see what kind of spots I can find to rip them. 😁 Side note...any chance those beefed up drive shafts will be compatible with the Outcast 8s? 🤷🏻‍♂️

limit straps maybe?

I love it

Rich what diff fluid do you recommend brand and weight wise in your Kraton that you would recommend for me? Since I seen and heard a lot of different things but not sure what is true and way off from what I thought the manual recommended. I was looking to pick some up when I order my EXB so I have it on hand since I currently do not have any.

Hey rich was wondering if you have made a video on slipper clutch adjustment? Do you go a half turn out from tight on all your rigs? Looking to adjust one on a granite

WHOOSH. peace.

Rich what ramps are you using on the gravel hill there? It looks like 2 black ramps. Curious as I am trying to find some good ramps out there rather than building one out of wood.

Rich what steering servo are you running in the 1/5 8S? I have been through two now and none are strong enough to turn the trick. My current turning radius at a decent speed is about 15’ and that is not acceptable. I need to get it to turn a lot tighter. Need a stronger servo for sure. Help me solve this issue or my 1/5EXB will retire and I will be going back to 1/8EXB

Hi, mate good job as always could I ask where you got your jump ramps I have been looking for some but can't find any but saw you had some, always loving the vids 😉 take care buddy cheers gav 👍👊

Best vids in KZfaq like 👍🏻 always rich 🤩🤩🤩

What motor and esc is that? That setup is beast mode. Love it.

I live in elverta I heard you are local, where do you run these cars at

some of those trails look like Folsom lake area. Are you in Nor-Cal?

3:58 What the hell???????? How did u do that??

Hey Rich, each time I watch your vids I have to get out my k6 exb. I have a reefs 444 servo, strong, but all servo power getting lost in servo saver. You know how to sort that out? Thanks!

Rich if you are 39 pinion / 39 spur how do you keep your temps down on your motor? It’s 59F here, and my HobbyWing 800kV was at 163F after one 5000mAh rip with my Panthers at 39/39.

What motor are you running on the kraton 6S truggies? I got arrma kraton 6s v5, but I need help deciding between a max8 combo or Max6 combo. My cousin has max6 but he hasn't run it yet. The max6 his got is so heavy and don't know if it will get the air time I want because I want my kraton to jump higher. Thanking you in advance #fromaustralia

Rich and dude 81 or them guys shot out to them!!!!!! They them boys don't no body do it better then them send it !!!!!!!!!!!!!!!

Nice! How much does the car weigh with batteries and all the upgrades?

Are the M2C bones strong enough to handle a 1100kv motor running 32/39 gearing on 8S

💪🏾💯🔥

👍👍👍👌

They should name an airline after you. do you have any suggestions for the ever breaking tail support on the 6s line exb? (Besides me learning how to control ;) like after market? thanks!

FIRST! Edit: How thick without the braces just the Chassis is the m2c Chassis?

What Servo are you using?