How to Fix PS5 & PS4 Controller Analog Sticks Drift with eXtremeRate DriFix Kit

Рет қаралды 30,020

Жыл бұрын

The eXtremeRate DriFix kit can fix the analog sticks drift issue on PS5 & PS4 controllers.
Soldering required.
To calibrate the stick after installing the kit, please connect the controller with the USB cord and go to extremerate.com/pages/gamepad...
Shop Links for PS5 Controller:
Amazon US: amzn.to/3U3z0zp
Amazon CA: amzn.to/3T2x7lo
Amazon MX: amzn.to/3FSwxU6
Amazon DE: amzn.to/3fw0q26
Amazon UK: amzn.to/3zHdPeg
Amazon FR: amzn.to/3fxgu3z
Amazon IT: amzn.to/3UnEll4
Amazon ES: amzn.to/3NzNuEQ
Amazon AU: amzn.to/3Wxy9c4
Amazon JP: amzn.to/3UaQiuI
eXtremeRate.com: extremerate.com/PFMD007
Aliexpress: bit.ly/3EeuxV4
eBay: ebay.to/3UmatG5
Shop Links for PS4 Controller:
Amazon US: amzn.to/3NzED6e
Amazon CA: amzn.to/3FBCtRv
Amazon MX: amzn.to/3FL0jdI
Amazon DE: amzn.to/3ft9Efy
Amazon UK: amzn.to/3sVezsG
Amazon FR: amzn.to/3hc5CIC
Amazon IT: amzn.to/3WqDCkZ
Amazon ES: amzn.to/3fzDAqd
Amazon AU: amzn.to/3hbJqi0
Amazon JP: amzn.to/3fHkbUo
eXtremeRate.com: extremerate.com/P4MD004
Aliexpress: bit.ly/3Ej2Quy
eBay: ebay.to/3DVbXQs
The rest of the world:
Aliexpress: www.aliexpress.com/item/32568...
eBay: www.ebay.com/itm/385058631102
eXtremeRate.com: extremerate.com/products/drif...

Пікірлер: 121

@Code_ReVo Жыл бұрын

No other company like Extreme Rate produces such valuable and sustainable products. It's amazing how much they're evolving! Greetings from Germany and thank you for doing such a great job.❤️

@ocdan8974 Жыл бұрын

Extreme rate products are ass wdym. Everything is always slightly off a measurement or has delay or somthing always up with their products

@rickle6679 Жыл бұрын

@@ocdan8974 bro go buy a 200 dollars controller. Who else making better parts ?

@vodric Жыл бұрын

@@ocdan8974 never had that after ive bought between 5-10 products

@2b2c1d2 11 ай бұрын

@@rickle6679 their products are always half way. they never make a product that works for every controller. like for my ps5 controller, they have missing pieces, incorrect versions, even for my ps4 controller. almost everything on their website is complete trash that isn't compatible with anything

@dadsskateshop9733 3 ай бұрын

@@ocdan8974 their products are user installed; maybe it's user error that you have had bad experience with extremerate

@codemanmodz9218 Жыл бұрын

Is this a patch for the potentiometer because the toggles inside the thumbstick can get flatten and so can the spring inside wear out that causes the same problem 🤔?

@gnwekest6950 Жыл бұрын

I would like to know about the black inslation tape used in this video. please URL.

@om4r05 Жыл бұрын

I just did this process on my ps5 controller. I changed the potentiometer and added the stick drift prevention kit and for some reason I can’t adjust the deadzone. When I rotate the stick it only shows going up and down not in a circular motion. What can I do to fix this?

@BananaWarrior23 6 ай бұрын

I highly recommend replacing your analog joystick and installing the driftix kit at the same time. As many point out, stick drift is a gradually worsening issue. If you don’t replace your analog joystick as well, this is only a temporary fix. What I have found is that when I replace the analog joysticks with new ones, often they are not perfectly centered to 0,0. Installing this kit in conjunction allows me to calibrate the new joystick and be left with a perfectly drift free controller with easily as small as a 2% dead zone. You of course, will lose a max input in that same axis that you are correcting in a proportional amount to the original amount the stick is off center. You can adjust for this in many games through changing the maximum stick input percentage. Basically, dead zone around the edge of the joysticks input range. COD, for example, offers that. Hope this helps!

@Eddy-th3kc 2 ай бұрын

Hi should I change all joystick or the potentiometer is enough?

@philfocus1 Жыл бұрын

Question c’est pour quand la manette driff ? Ou jus ajustement central exemple. Analogue de gauche driff vert la gauche seul ceci répare?

@TechJahHD Жыл бұрын

I'm scared to solder stuff, but mad props to you all for coming up with these things. Can't wait to see what you do with the PS5 edge controller when it comes out.

@ThomasTheTankEngine22 Жыл бұрын

I hope they find a way to add 4 buttons to the controller. That's the only downside and deal breaker for me with the edge (outside of knowing the price)

@TechJahHD Жыл бұрын

@@ThomasTheTankEngine22 I hear ya on that one. Sony got the money 😒

@omarneyra5500 Жыл бұрын

Amigo mire tutorial para soldar yo e soldado así.

@ExtremeRate Жыл бұрын

We can't wait to have the PS5 Edge in hand LOL

@ExtremeRate Жыл бұрын

@@ThomasTheTankEngine22 How about 6? lol

@DarthYazzie Жыл бұрын

Awesome!! Can't wait to try this out.

@ExtremeRate Жыл бұрын

Hope it will help you! :D

@DarthYazzie Жыл бұрын

Your other products work great so I'm sure this will be great. Expect the clicky triggers for a ps4 controller I got. Those broke under a week.

@lucadini3726 Жыл бұрын

Ciao, ho montato il vostro kit per regolare il drift, ho eseguito la regolazione come da voi mostrato, ora i movimenti non sono più come prima e i comandi a volte non rispondono bene, avete qualche consiglio, ho acquistato da voi diversi kit per i controller ps5 e hanno sempre funzionato perfettamente

@erraddict 7 ай бұрын

Can this work with aliexpress hall effect sticks?

@bkid1776 5 ай бұрын

@ExtremeRate I wrecked my pcb board holes for one of the potentiometer the 3 small holes is it possible to buy a bdm-30 controller or to buy a new pcb for it? Also mabye this part can go over the holes and it will solder into the damaged hole? Please let me know where I can find bdm-30 controller if anyone knows or the pcb board part

@moneyboy503 Жыл бұрын

Hey, there's an anti drift board from the guy Helder who (apparently) came up with the designs but it's one he made for an off brand controller that's pretty popular called PowerA. would love to see one like that

@avglvlgam3r307 3 ай бұрын

What was the point of desoldering the motor wires if you need to resolder them back in the same contact points?

@jtxhitman6381 Жыл бұрын

I mean look at the technology these guys come up with. Ain't no other company doing what ExtremeRate does, they're on another level. Check out their resume and just go down the list. Everything they drop is str8 🔥🔥🔥.. & not to mention the dope ahh customer service too 💯💪✌️ I appreciate ya'll 🙏

@Adv3rc1ty Жыл бұрын

well, they didn't come up with it, there just wasn't much availability in the U.S. I have a set for a while that I ordered from china.

@jtxhitman6381 Жыл бұрын

@@Adv3rc1ty Gotcha 👍! But Still, every tech these guys put their stamp on is official! Invented or not I appreciate them giving us "regular" gamers these options that we would never get elsewhere

@ExtremeRate Жыл бұрын

Thank you bro 😄, this kit was suggested by some of our customers, and we hope to make things different or better! 😁

@ExtremeRate Жыл бұрын

@@Adv3rc1ty Yes, and we tried to make it easier for installation 😁

@tonka8080 Жыл бұрын

They didn’t create this. They’ve been around a while and are hit and miss and will only work temporarily. They will however extend the life of your controller. I prefer to just replace my modules. It can be difficult to calibrate them after but I designed a jig to help alight them properly

@opellocustoms 10 ай бұрын

THIS PRODUCT IS THE SINGLE GREATEST THING I'VE PURCHASED! I BOUGHT 2 SETS OF THESE ALREADY!!! AND I LOVE THEM!!! THANK YOU THANK YOU THANK YOU!!! EXTREMERATE THANK YOU! P.S. I'M SORRY FOR YELLING! I'M JUST REALLY HAPPY RIGHT NOW! I JUST FINISHED FIXING MY SECOND CONTROLLER! SO THANK YOU AGAIN. AND KEEP MAKING AWESOME PRODUCTS! ❤️‍🔥❤️‍🔥❤️‍🔥❤️‍🔥❤️‍🔥❤️‍🔥❤️‍🔥

@BaamAlex 8 ай бұрын

Such a driftfix board is a nice idea. But doesn't really solve your issue. Nothing against their work, but the drift is from the inside of the stickbox.

@twatik 4 ай бұрын

@BaamAlex U see, thats what we all think. I just finished taking out the right stick module, replaced it and soldered again, fixed stick drift, EXCEPT my controller still drifts slowly upwards to the corner😂 Prstty sure sony did some bs and made it so u get drift even when switching modules

@biagioneresino2902 Жыл бұрын

Ho acquistato questo kit ma ora mi servirebbe sapere il programma per tarare da pc grazie

@Cemcy 7 ай бұрын

what do I do I don't have a soldering iron thing

@Disco_Potato Жыл бұрын

"adjusting deviation" does it mean all you're doing is just making the dead zone larger? The drift is still there, just not visible. That's a bummer.

@Lighterz1907 Жыл бұрын

So this effectively calibrates the sticks again? Basically telling the sticks the centre is somewhere else? if drift gets worse you will need to open and calibrate it again?

@deener8365 Жыл бұрын

Im assuming if it get too far off, yes you would need to replace the pot or whole assembly.

@Adv3rc1ty Жыл бұрын

correct, if the stick gets to far off than you will a new analog stick but with this, it makes it easier to calibrate the new analog stick.

@bobbymoss6160 Жыл бұрын

So the thing I don't get is this daughter board with the calibration buttons, you're adding it to re-calibrate and center the joysticks, but it doesn't fix the worn out carbon disks inside the potentiometer, what happens when the carbon contact is completely worn out?

@flyingtentacle7631 Жыл бұрын

You buy a six pack of them for like $10. I think the point is that it makes it easier to pop replacements in to your controller. Normally, you'd have to manually move the disks, resolder, test, adjust, resolder, test, adjust, resolder, test, throw your controller out the window and buy a new one.

@Kasti-kw2ou 9 ай бұрын

Does it works with Hall Effect Modules too? I mean for Calibration. Thank you

@stx137 9 ай бұрын

for Hall effect, this is the one you need. kzfaq.info/get/bejne/osxkea1mvNWymYE.html&ab_channel=junZeng

@UberMicroRepairs Жыл бұрын

Over 6% drift on axis 2 and you don't show the sticks going to 100% in all directions. Also these won't help you when the carbon track eventualy wears out.

@ExtremeRate Жыл бұрын

Correct, after installation, the range will shorten to about 90%

@GOATGamerProSticks 3 ай бұрын

Bonjour Uber Micro 🫡 say it as you see it 😁 lol.

@DustinRickman2020 Жыл бұрын

So you plug the data cord into the controller to calibrate. Are you plugging it into your Playstation or a computer?

@ExtremeRate Жыл бұрын

The computer

@driv3n-20-9 Жыл бұрын

how do you calibrate the analog stick after the install? Is it a third party program?

@alexsoto9638 Жыл бұрын

It’s a website

@abab0015 Жыл бұрын

What temperature for soldering tool when doing this is recommended? 1st time lol

@whopper5150209 9 ай бұрын

680 degrees

@R-ri2fj Жыл бұрын

It causes deadzone range decrese.

@CraigsChannel Жыл бұрын

Thumbs up if you hate stick drift 👍😄

@ExtremeRate Жыл бұрын

No body will like the drift lol

@orryyang8846 Жыл бұрын

I heard if you fix the analog this way might change the thumb sticks radiation

@ExtremeRate Жыл бұрын

Yes, will only remain 90% thumbsticks range

@viol3nza Жыл бұрын

ciao, li fate anche per l'elite v2?

@ExtremeRate Жыл бұрын

Ciao, proveremo a farlo più tardi!

@Bagz1994 Жыл бұрын

Can u explain how this fixes stick drift. Is it a hall stick????

@Adv3rc1ty Жыл бұрын

ok, so the way is works is that instead of you moving/calibrating your potentiometers before soldering the stick, you can now just solder the new stick, solder this part on the back of the board and turn the potentiometer with a screwdriver to calibrate it. It akes installing new stick or older sticks suffering from drift to be recalibrated easily to be as close to to the center of the X,Y axis.

@ExtremeRate Жыл бұрын

@@Adv3rc1ty Correct!

@user-uf7mw5rl6g Жыл бұрын

If my dead zone was 7 then I can otkabirovat with a screwdriver and there will be a dead zone 1?

@ExtremeRate Жыл бұрын

Sorry, I can't clearly understand what you mean

@user-uf7mw5rl6g Жыл бұрын

@@ExtremeRate If my deadzone is 10 allow stick drift can I calibrate to deadzone to 1-2? Return the gamepad to a new state?

@dra6o0n 7 ай бұрын

A good idea to make it easier to calibrate is if you mod the backplate of the controller so when you attach it, small tiny holes over each calibration point is there so you can stick a tiny screwdriver in and tune in without opening it back up. Maybe get a custom controller sleeve to wrap the controller in on the bottom side, so you can cover up the hole.

@BananaWarrior23 6 ай бұрын

Or just poke it with a soldering iron!

@dra6o0n 6 ай бұрын

@@BananaWarrior23 I've tried using these on my several year old dual shock controllers, the noise on the modules are too damaged and too far gone to redeem them, I'd have to get haptic feedback modules to install and it'll be a bit pricier than calibration chips. But it's not impossible.

@keepitkush5208 9 ай бұрын

Whats the logic behind this? Like how does it fix the drift? Ive put a new joystick in my controller and still have the same exact stick drift ao im not sure if this will help since i think something more than the joystick is going on with mine.

@a_LaLi_LuLe_Lo 8 ай бұрын

Changing the thumbstick does nothing for drift. The potentiometer it attaches to is what causes drift the components get worn out and dirty over time and the less care and preventative maintenance that goes into it as well as harder use causes it to fail at a faster rate. These pcbs digitally correct the potentiometers ability to read input so the logic is that they correct a hardware issue on a software level Replacing the potentiometer is also a solution but it requires soldering at higher heat level and is still subject to wear over time it’s the equivalent of buying a new controller whereas like I said these correct the input on a software level

@keepitkush5208 8 ай бұрын

@IXxBossxXI I think you misunderstood when I said I put in new joysticks. I replaced the entire assembly, pots and all. Like soldered a new one in. I also tried these and it didn't fix it so I assume that something else is wrong with the controller. Like something blew. Not sure what it could have been. But something on the pcb is fried or damaged. When hooked to a PC in testing mode the X axis doesn't exist. When hooked to a ps5 it's as if the joystick is stuck to the left. Any other controller I've just soldered a new one in and done. This one needs tested and the bad component replaced. Thanks for the explanation on the product tho. Sadly it didn't help me with my problem.

@asotaventoasotavento2789 11 ай бұрын

Hola cuanta altura y diametro tienen los muelles de 50 gramos de vuestra pagina web?

@Dianasljsvsvsh 3 ай бұрын

I have a lot of drift, if I buy this from the control, will it be solved?

@ExtremeRate 3 ай бұрын

If the drift is caused by the scratches on the carbon board of the thumbsticks components (it will be like gitter in game when you move the sticks), then it can't.

@maxxbecker8975 Жыл бұрын

Please make an installation video for installing hall effect triggers on a PS5 Controller THAT WOULD BE LEGENDARY THANK YOU! YOU GUYS NEED TO MAKE HALL EFFECT TRIGGERS I WILL PURCHASE THEM SO FAST IF YOU EVER DO THIS

@ExtremeRate Жыл бұрын

The major challenge of the hall effect triggers is how to convert the analog signal into the hall without adding too many components, the space is very limited

@tiedye1631 Жыл бұрын

If your soldering stuff might as well just replace the thumbstick modules.

@deener8365 Жыл бұрын

Or just the pot, 3 points instead of all of them.

@ExtremeRate Жыл бұрын

Yes, but the most difficult parts are take off the old sticks and calibrate them

@tonka8080 Жыл бұрын

Yes because these kits are only temporary. It will only work Until Analog modules completely die. Most of the time all they need is a really good cleaning with something like Bw100

@groghunter7403 Жыл бұрын

Because they calibrate for stick variance at the factory, and Sony won't let us recalibrate the sticks. so a brand new stick, or even just a brand new pot, can have a different enough center position to cause drift right from the start. the precise center point of the pots is literally defined by how a few bits of plastic fit together, so there's going to be variance. I'm hoping that Sony gives us the ability to recalibrate with the release of the edge controller, but until then, and maybe after, this product is needed, even moreso with new sticks than it is with a stick that is exhibiting wear related drift.

@86FaBiEtTo86 Жыл бұрын

Help me please! The program for fix the problem?!? The name?! I have this problem but no have a program for fix this :((

@ExtremeRate Жыл бұрын

To calibrate the stick after installing the kit, please connect the controller with the USB cord and go to extremerate.com/pages/gamepadtester

@86FaBiEtTo86 Жыл бұрын

@@ExtremeRate I found it but I don't see the pattern as in the video below the dot …:(

@іхххі-і 6 ай бұрын

I don’t have a soliding iron

@sarahwave5943 9 ай бұрын

The fact that you still have to solder makes it pointless might as well go the full swing and completely replace the analogue box atleast then you can be sure its fixed.

@smalltech9835 Жыл бұрын

I'd still suggest swapping the analog. All this is doing is putting a band aid on your issue..

@ExtremeRate Жыл бұрын

Yes, but if you install this with the new sticks, it will help you calibrate easier

@smalltech9835 Жыл бұрын

@@ExtremeRate agreed!! Just before people get all excited that this is the end all be all solution :p lol

@UberMicroRepairs Жыл бұрын

I agree 100% I NEVER use these.. and I de-solder them when a controller comes in with them installed.

@jeshuat8334 6 ай бұрын

This didn’t work for me they got worse

@-DiGiXi- Жыл бұрын

Import EU?

@ExtremeRate Жыл бұрын

It will available soon on Amazon EU!

@Arex89 Жыл бұрын

Rip drifting 2022 by Extremerate 😁

@ExtremeRate Жыл бұрын

lol but if the drift is too far (over 0.12), then you need a new stick

@philfocus1 Жыл бұрын

Comment on fait savoir si plus 0.12 ?

@DavidLee-us6he Жыл бұрын

The indtall instructions don't fix the problem the install caused

@ThomasTheTankEngine22 Жыл бұрын

🐐

@ExtremeRate Жыл бұрын

🐂

@StefanoPiga Жыл бұрын

Ab wann in Deutschland?

@ExtremeRate Жыл бұрын

Innerhalb dieser Woche

@z3ro7o Жыл бұрын

Way to much work. For normal users . Hope there will be a easier way. Soon. Like the back paddles with out soldering

@ExtremeRate Жыл бұрын

But I'm afraid soldering is required when we do any thumbsticks mod

@z3ro7o Жыл бұрын

@@ExtremeRate unlucky 99% dont have a soldering station its 40 euro. allmost new controller

@OTooth506 Жыл бұрын

I have the xtreme rise 2.0 and have 4 buttons on the back and didn’t have to solder. You old have to solder if you are trying to re map certain buttons like the touch pad but it you just want to use like o x square and D buttons on the back no soldering is required