I literally installed following every step and I made my control go crazy

Finally the videos up 😁 my messages for the past 2 weeks are "When's the BDM-030 video coming?" 😄

Heart stopped a second thought you guys had already found a way to add 4 paddles to the EDGE

No way i watched your old vid on your channel and was hype to see you're now on the official channel. good shit dude ur guides are awesome

I can confirm if you have bdm 040 it will work with this version!

can you please make a separate, shorter video of installation without mapping the touchpad and other parts, I find this confusing even with skipping the time stamps

After 3 hours, i finally did it 🍾 without L3, R3 and pad because i only need X and O

Thanks for these paddles. I have 4 of these funny enough. I was thinking when would we get back buttons for the PS5 controller ? The paddles are good but they do feel like an extension on the PS5 controller. I feel if we could get back buttons which are not too extensive ( like the ps4 ones ) but sit a little deep into the shell of the controller with the intention of it being part of the controller will be great. A membrane style back button like the face buttons of the PS4 controller will be something new to the community.

Soldering is turning me off from purchasing this & the English “if you don’t need ___ button can be mapped to rear button” is so confusing. I just want to be able to press x on a paddle without soldering. If I just plug ribbons in will I be fine with it still working?

Works great. I even broke one of the original ribbon cables off and still works. Was probably just for reset

I think a tip I would give to help with aligning the yellow ribbon with the motherboard, is to use the screw driver (or similar small rod that can fit through the holes) as a pin to temporarily help align the thing.

This was the most incredible tutorial I've ever followed. Thank you so so much for this complex yet so simple tutorial

Please make rise 4 kit and click triggers for Dualsense edge. it will be perfect pad.

Thanks mate my controller is ruined I can't play on my ps5 anymore

Would be huge if you make a 4 paddle edge controller with clicky triggers.. maybe exactly the same paddles as the edge has but then two more 😳😳

if the light flashes three times , it indicates there is a problem with installation. How can i fix it ? Pls help

Thx Einstein for making me close the hole damn thing before noticing that no light is burning on the kit

What do I do if I don’t have a soldering iron

Nice kit. Installation was easy with such an in-depth guide. I don't like alu pedals, u constantly get electro shocks from these while gaming... lol

Worked for about two months.

Can someone please confirm that if you don’t want to remap L3, R3 or touch pad that you don’t need to solder anything? I’ve installed the bdm-020 before which didn’t but it’s not really clarified in the video

What's the purpose of installing the EVA tape under the original fpc board? Also can't you just put the remap fpc board on top the original like normal? Similar to the BDM 020 installation of the remap fpc board.

Is this kit the same one that fits the BDM010 & 020 too? I bought a kit ages ago and it seems to have all of the came bits but my controller died and I only have a newer BDM030 now - will it still work? Help lol

Ive had my back buttons on for about a month now and theyve been good. But today i noticed theyre not reacting as much even though the click of the paddle sounds fine. I have one set to jump the other to interact/reload and theyre both kinda not reacting properly.

do you have to have a soldering iron

it is necessary with the welding device... if you don't have it the kit is useless i think

Just a question, is BDM 020 and 030 has the same installation method? I don't do the touchpad or L3 or R3 just straight to the X, square, circle button

After installation my controller will not turn on. It will light up orange when connected to a usb C cable but that’s all the response I get. I took it apart a few times to make sure the batter was connected correctly and I have also tried making sure the button sensor pad was flesh and free of dust. Nothing has worked. Please help!!!!

I have an 020 kit with a 030 controller… i did that same thing 2 years ago when i bought a 010 kit for an 020 controller. Why is sony doing this? Do they know about your product or something? How am i supposed to know a controller is 020 nowadays?

Hyped! When are the bdm030 trigger switches coming out?

Hello, I need help, I cut the wrong part in my quite and I would like a new piece for bdm 40 please (i am french)

On the exact minute 12:30, it fits perfect in your controller. But in mine it doesn’t! The holes are more separate in my controller

Is the tape you put on necessary or can I just put it straight on

LETS GOO I DID MY 030 KIT PERFECT WITH NO VIDEO !! SHOUTOUT CRAIGS CHANNEL FOR THE OTHER VIDS ANS EXPLANATIONS

I've never open up an controller in my life. Do you guys recommend me juts following the tutorial or should I let someone with a bit more experience do it?

This was helpful and clearly laid out but ya do move at speed. For us fat fingered folk dealing with an iPad that you have to scroll back over and over again and then you go far back and then too far forward....well a little walk to clear the head saved the early death of the iPad😊 Great product though. Thanks! UPDATE: A testament to the build quality....put it all back together and realized I forgot to put the Option and screen capture buttons in so had to reverse engineer it which was a major hassle. The speaker button fell off and couldn't get it back on but not a great loss. The little piece attached to the mic cable also fell off but again, not a big deal for me. Put it all back again, didn't work! Had a feeling I forgot to plug the battery in so went back in again, yup dum dum. Put it all back together AGAIN and now works solid. Great little product and all the parts and cables took the back and forth without a problem. One thing though if you have big hands just breathe deep. You'll get there but it is very finicky. And not your fault at all but the parts and screw driver look much bigger in your hands than in reality but probably because of the zoom.

I just installed the clicky trigger kit and rise 2.0 for the bdm 30 and didnt get a red light spent hours taking it apart and in the end it was the fpc cable not lining up with the mother board . Was about ready to launch it out the window but it's working a treat now 😂

Waiting patiently for the front shells to be realised, do you know when they'll be available?

So no need for soldering if you just want to remap the front buttons x, circle, square, triangle?

Waiting for the clicky triggers for BDM-030 to release, can you tell me anything about a sooon release date maybe? :)

Do you have to have the soldering iron for this?

as soon as i connect the orange remap cable, my d pad and L2 & L1 arent working, without the cable, everything is working, whats wrong with this kit ? i reinstalled it 3x. there were no problems with the bdm 020 kit tho EDIT: i repositioned the EVA tape (and probably the remap cable too again) and now everything is working !

@ExtremeRate are you working on a BDM 030 hair trigger kit?

Ich habe das selbe gemacht was du gemacht hast und bei mir läuft das nicht. Ok hab nochmal ausgebaut. Hab bemerkt das die eine flexkabel nich richtig drin war. Jetzt klappt das

I lined up and put EVA tape under the original FPC cable and the yellow one wouldn’t go on top of it, I tried doing it as you have in the video and sticking it to the mother board and it stuck but when I go to put my motherboard back in, it won’t click on the right side (the side where the Added EVA tape and FPC cable is, it just won’t click in. What do I Do.

I installed the kits on my 2 controllers,after approxemately 1 week playing with both controllers i suddenly have stickdrift on the right analog stick,on both controllers at the same day!How can i try a reset?What can be the problem,i know there was an update of sony for the dualsense?I cannot reach the reset button on the back due the risekit..Hopefully you have an idea to reset or solution for the issue,thank you in advance.The risekit works perfectly and i soldered for all buttons

On the front cable, one of the holes are covered up. There isn’t two holes, only one.

The track pad is not coming out

The light keeps turning on by itself after I mapped the buttons. When the light is on it does not work. Any solution ?

Mine didn't come with metal rods smh. I checked every bag 5 times and all over my desk.. nothing

If I don’t need touch pad or r3 L3 do I just skip everything ? Plug and play, kind of lost

I have a BDM-030 motherboard and I bought the right kit but it doesn’t work and everything is connected properly…

Wow good video! I have a question my controller pad is bdm010 makes it a difference or is everything like in ur video or I need another tutorial with bdm010?

Question. Can this back button kit be installed for only face buttons like X and Square? I honestly don't meed the TouchPad or R3&L3 buttons

but on a serious note lol are you guys doing a bdm 40 version for the mouse click triggers and buttons because I need them.

My yellow ribbon has a slight cut in it and it doesn’t work is there a way to fix it

If you have the clicky kit and the rise 2.0 and want this properly installed. How to approach this the correct way?

It's a great video well explained if you want to map the touchpad and the R3 L3 buttons. I ended up ruining a ribbon cable and bought a new one. I watched this video again and realized I didn't have to do any of this trickery if you ARE ONLY GOING TO RE MAP THE SQAURE, TRIANGLE, X, AND CIRCLE buttons. I know you added text to the video. But next time do it for us ass-wipes that don't pay attention, and say it in words. lol Thanks

So if I just want X and O I don’t solder and I just put the electronics in?

when i ordered mine it didn’t come with the tape, or the orange ribbon

I took off one of the black cables that are soldered in on the PCB 😢 how can I fix it ?

TY!

Hi Craig on the bdm 30 do we still need to change the side stripes or is just the mother board I ordered the wrong kit but extreme rate was kind enough to send me the bdm30 but only got the back mother board

The white things that hold the ribbon cables on the right and left broke off

I bought a bdm-20 kit for a bdm-30 controller. Could I just buy bdm-30 cables and install it the Same way?? ❤

If i dont need the l3 and r3 do i still Need to glue the ribon cable at the battery because i want to do battery replacements in the Future but if Glue the ribon on the battery i cant replace the battery

the K1 trigger works for me but not the K2. Any suggestions please?

is it normal that my kit the holes are NOT aligned properly? like theres like a couple mm bigger on the FPC part? is this controller different because i see the inside totally different to mine and they´re supposed to be the same model, help!! :C

Mines flashing but idk what i did wrong

The remap mode just flashes, how do I fix the installation?

If im installing the quick triggers and the remap kit do i need to reconnect original fcp strips for triggers or are they not needed anymore (the white and blue) because in the quick trigger video they tape those out of the way

Why is my controller making a clicking sounds after I installed my pack

This kit seems much simpler with no removal of ribbons. So is it really just stick that orange ribbon it and its ready pretty much if you don't want to solder?

Hey I need some help my K2 paddle is like instant click but my K1 like is loose a little and doesn’t it works but it’s a bit annoying and idea what’s up?

for some reason the light randomly turns on and the controls ratio working. is there a fix for that?

The ribbon that came in the kit didnt have de adesive to glue in place, what do i do?

I have a question am I able to use this and the mouseclick triggers together?

My red light doeant turn on at all but my controller still turns on

My left paddle doenst click for some reason, its lose what do i do?? Anyone have ideas?

which do you prefer the plastic or metal?

Does this work with bdm40 plz tell me

Please someone help me. My touchpad seems to not work on both controllers i did this with. What could this he?

Hi my controller works fine but there's no light from the paddles. I accidentally watched the rise4 tutorial while doing it but skipped all the soldering. Any ideas?

Non riesco ad agganciare lo sportellino in metalloConsigli?

Ngl is it a more simple way that’s not time consuming to put it on

so if i dont want to solder i just stick that orange part on the board, put it together and im done?

It says currently not available on Amazon CA. Are they sold out or just amazon stocking them?

is the digital triggers for bdm 30 released yet? I dont see it anywhere

im stuck man ive taken apart the controller im confused now i dont have soldering machine

Mine didn't come with the shell, I wasted 32$

It doesn’t fit at all in my controller, I just bought it. Not sure if it’s because is the newest version 😞

I ordered the BDM010 and 020 kit but I have a BDM 030 controller. Do I have to buy a bdm030 kit or can I get the 030 cables replaced. I emailed but no response

what if i dont want to map the R3 and L3 and also the touch pad can i still use it for the buttons?????

Can the mettall buttons rusting

I install mine and it doesn’t wanna turn on at all I got the BDM030 what can I do ?

Installed it and it works. However, the paddles don't work for a short time if I accidentally press L3 in Warzone while I'm running. This is often unavoidable in stressful situations and my jump doesn't work while I'm running because I accidentally press L3 while running. Does anyone have a solution for the problem?

If tired all the steps but my light isn’t flashing can someone help?

Is it possible to do it without a soldering kit???

Do u hv to solder?

Will the back buttons still work with out soldering?