First off, Thanks for making this video! Second pictures DO NOT do these bars justice!! "WOW"...I received my bars yesterday and after unpacking them from a very large high grade box I am blown away by the quality of these bars!!! Factory 47 ... WELL DONE!!! Fit , Finish-and overall quality is beyond my expectations. The chrome finish is true SHOW QUALITY!! Are they expensive?? Yes! But you really get what you pay for!! Thank You Factory 47, you are at the top of your game!! True Made in USA Quality. And to all the do it yourselfers, Watch the video.......its as easy as they show to install on the rushmore R/G's. No cable extensions, no brake or clutch lines replaced, unless you go over the 14 inch bars. Or pay some one $350-450. To install. I checked on 2 different shops and 3-4 hours is what they quote at $90 per hr.

Really makes my bike look awesome. 14" bars were perfect size !!! So glad I went with Factory 47. Flawless fit and finish. I would highly recommend

Installation went well. There were some changes between the 2015 and 2016 Road Glide. It's a positive change. The big plug that had to be removed is smaller and does not have to be remove to pull the wires through the bars. I am glad I bought the bars.

I got the 12inch followed the video for install on my 2016 road glide, simple process, with a 6 pack of cold ones.... hands use to go numb when I ride, now I'm flying in the wind....1 Luv for factoy47....

First off, I want to say thank you to Factory 47. Your shop in Whittier is amazing!! Second, Your customer service is of the utmost excellence! Third my bars are great!!! This install video help me in doing my STR Miter Bars 14'' on a 2022 Road Glide FLTRX. Super easy process that took me only an hour to achieve!! Thank you Factory 47!!

My bars came in today! I have to say they look absolutely great. I will let everyone know how the installation goes!

mine on order ..can't wait

Thank you, this is the video I could find for lacing wires through my style apes. Great video.

Fantastic!! Can’t wait to get some.

Nice job brother…time and patience!

Needle nose pliers for cluster screws you are the man. What a pain in the ass those screws are. Thank you for the tip

@Gregory Johnson No you can use all Factory lines

I love my 18"flat black factory 47 bar on my 2015 road glide special:)

2016 road glide install. can I add heat demons and also run the wires inside the bar? any special instuctions?

Will these fit on a 2018 road glide special without any extensions

Installing 12's on my '08 Road Glide this weekend 🤘

Excellent video @Factory 47 Cycles I recently installed my signature series bars on my 2017 RG standard and this video is 100% accurate as of how to install these bars took me maybe 1 1/2 hours with no help using all components in this video and I installed a set of Avon air cushion grips it is a very nice upgrade to the scoot and makes it very becoming and comfortable for the highway thanks for creating such a great product I saved $1000 bucks for investing in these ape hangers instead of having harley do a set of bars for me( $1500 bucks) thanks again!

I have a 2018 road glide will I have to extend the cables?

Where you able to install those 14 in with using your factory cables and wiring

I got a 12” F47 bars for my 2019 Road Glide Special and its a pain in the ass to install all these cables.

what tool was used to undo the wires from the harness?

Did you install new poly riser bushings for these bars?

Do you have to shim the front brake lever? To not break the switch on the 15+ bikes

for the 14 pouces , without changing the clutch wire and brake wire for road glide 2015 ? Must it change the electric cables ?

amazing work brotha!

I just did my bars . First I use cable lube, I did two cables at the same time alternating as I push & pull each one..I also installed kahuna heating grips which made the left side a pain .

Just ordered a set for my 17 RGS! First mod stock bars bother my elbows!!!

I just brought a 2018 road glide and I want your bars!! I need to change the clutch cables and brakes cables?

Step @ 3:42 do I have to do that or can I just feed the cable through the bars with that connector?-Thanks

For a 2015 ultra limited do you need to change cables for 14inch?

awesome video saved me hundreds of dollars. no need to take plug loose on 2016

will these work on a 2005 Road King without having to extend cables or wires?

Does the big plug have a diagram where the wires go back?

Hi, this video is awesome. A little over 3 years old. I have a 2017 Road Glide and at some point I will be swapping out the bars for a set chiseled. I'm wondering about the pin. Is it necessary to have it installed. I'm sort of short and wanted to pull them in an inch or so.

What’s the name of the song that starts out the video?

hey guys quick Question im taking of my stock handle bars off my 2015 road glide special and putting on 14 inch factory 47 assault bars do i need to get extenions cables

Just purchased a 2021 rouadglide, I know its now a cable instead of Hydraulic, will these work without having to change out clutch cable?

At exactly 14:06 you are putting the wires back into the small plug but you never show how to take those wires out ... did I miss it or you skipped it .. I can’t get that plug to pass threw the bars , so it has to come off .. how do you do it ..? Thanks

will this work on 15 FLTRXS with stock cables and lines? HD says stock 6" will not stretch past 2", they lying. video looks convincing but just wanna make sure is all .

great video

thanks will be installing my 14" Rivera's soon. What was the glue used for?

whats the music too?

Can anyone confirm if this method did work for 2018? Did the check engine light stay on for everyone in 2018. Wanting to try this on a 2019

@Customer Service WIll the installation procedure for 2015 CVO roadglide will also be the same? as we have heated grips.

Does this work for the 14" Legacy bars?

i have 12.5 tallboys on my 2015 road glide special that were installed with all factory wires and cables. i want to change to the 14" chiseled bars by harley, will these be capable of being installed with all factory cable and wires as shown?

How long should this installation take?

These work with adding heated grips also

Could I do 12" hangers on a 08 road glide without changing the clutch wire and brake wire. Or could I go as tall as 14" ?

Is it the same for a 2017 street glide special? and if not what is different

Look Awesome feel perfect

I have a dumb question ? On a 2016 R G ultra can I roll the handle bars forward for comfort the pullback mode sucks and it's 2,000 g's to replace with apes the stock bars in the right position has to b cheaper, please give in put

Honestly how long to change out those bars

I have a 2024 and I cannot get enough play out of the clutch cable. Do you have any suggestions or am I missing something? Other than that it went fine.

Do I need cable extension for Road Glide CVO 2018? Same bars Factory 47 Handlebar Chrome Signature 14?

Yes it is JonBlackboy but only for 2015 Road Glides

how much different would install on a '13 RG be?

I ordered a set 14" on 10-16-2015. I will let everyone know how it goes. I am installing them myself on a 2016 Road Glide Special. I will be going step by step using the video.

I want to do this on a 2019 roadglide special. Will ALL cables and wires reach? Also does abs make a difference.

Wonder if it fits stock wires and cables on a 2017 roadking anyone knows?

Nice beats.

IT Looks like the STR Miter bars have the factory pin notch at the bottom of the bars so you don’t have to pull the factory pin in the riser. The picture on the webpage shows the clearance notch as well. Is that correct? I believe it also states that in the video to leave the pin. The bars are made to accommodate. Correct?

Nice soundtrack

Hey Factory 47, why does Harley tell you that you need me wires and cables for 14in bars. I know to make $ right?

Just got my 14". Not sure if they're gonna fit with the new clutch cable on the 2021's sucks cause the aftermarket is available yet.

From what I can tell there were no modifications to the brake lines and clutch cable. Is this correct? Would you say that anything above 14 inch rise would need all new cables and electrical extensions? Thanks.

How much are the bars and where can i get them

@Jesse Glatz You do not need that panel.

Will these fit on a 2018 Road Glide Special? I'm thinking so....but would like to be sure. Thanks in advance.

@David Esparza Yes you would

would I need to buy a wire kit and new brake and clutch cables to install on a 2013 road glide ?

Anyone have problems with clutch feel after install. Almost like air got in the system.

IT DOESNT STRETCH THE BRAKE LINES? I WAS GOONA BUY THE 14" YAFFE BARS BUT THEY SAID I WOULD HAVE TO BUY NEW LINES AND WIRES FOR MY 2015 ROAD GLLIDE

Stock lines will NOT work with 14 inch bars, on 2018 Road Glide Special. I found this out the hard way. $300 for new lines.

Would be the same for 15 ultra cvo

now is this the same process of an 06 road glide

I called local HD shop to inquire if I needed new lines and they told me all new lines and a twist grip sensor if i installed their 14" road glide handlebars (part #55800440). Any ideas, other than getting taken to the cleaners! I just saw video and I want your bars!

How tall are you? I’m 6’3” waiting to know if 14” is tall enough or would you recommend 16”?

Hey guys I was just wondering some people have told me that I can use the factory cables just extend the wires for a set of 16s on my 19rgs I was just wondering if you guys knew

I change my handle bar from the stock to 18"

Right around 18:40 you disconnect the plugs from what looks to be a plastic mounting piece and then don't reinstall it, why is that part no longer needed? Docents it keep the wires neat and keep them from moving around and such?

hey I have the same bike how much will u do my for$$$ the same bar

where are you guys at i need my bars done 07 ultra classic

I’m about to order my bars and I’m going to do a KZfaq video for my the people who keep telling me I need new cables for 14” bars.

Should I presume this is the same for the '15 Road Glide Special as well? Are the Malo's usable for the '15 special?

I need them in black , how do I other them ??

I take it this will work for the 18 RGS too?

I picked up a 2018 can I do 14" bars without cable extensions and lines

what is the liquid in the bottle?

I never saw a reply from customer service on weather you need to extend the stock cable and wires for 14" bars on 2018 Road Glide special.

Of course... it always looks easier on KZfaq.

So you are telling me I can use factory lines on a 17 road glide if I only go up to 14 inches?

I've watched a few of these videos. Why doesn't anyone ever pull two pull strings in the throttle side then pull one of them out of the control location so they can pull all of the wires at the same time? I'm an electrician and it can be a pain pulling wires into a conduit that's already pulled. This is how I would do it it would avoid having wires twist around those already installed.

Just kidding great video

Thank you,I was quoted $400.00

Omg the dealer said 20 ft lbs I made it 20 will I be ok

Is this for real? If so I will order these bars ASAP

Does anybody remove the pin so they can put the bars the way they want them instead of at a fixed position

This procedure would be the same for a 2017 road king using 14 " Malo bars

Y’all ever hear of a battery operated drill to make things a little quicker