My old Farmall C has never had much oil pressure since I have owned it, in this video I try a trick I learned to restore some oil pressure. Another video of the process / canadianredneck15
Пікірлер: 20
@timrobinson64043 жыл бұрын
Thanks for the tip Chris
@JamesCouch7773 жыл бұрын
I did a lot of farming with a Super C. We mostly had H's with the occasional M thrown in. Farmalls run forever.
@KennyKizzleRustyNutzRanch3 жыл бұрын
Just a heads up - never use two gaskets. You will have a leak between the two. Gaskets are different than shim stock. You should be fine because you aren't changing the dimension inside the pump area - you are just changing the thickness of the plate itself. I enjoyed the video, Farmall C's are a beautiful and simple tractor. Feel free to come check out my channel as well!
@BeamerTheFox3 жыл бұрын
anythings better then nothing, an when you got just about nothing for oil pressure 7 pounds is alot better then it was, Stay Blessed !
@vinces89743 жыл бұрын
Great video, I couldn’t even begin to tell you how many things I have learned on KZfaq , including your channel , Is it very hard to put main bearings in your tractor, that would make a great video
@ChrisfromKeyfarm3 жыл бұрын
its not terribly hard to put bearings in, unless you find unexpected problems
@douglasferguson47113 жыл бұрын
Oil pressure should be fine - PSI is excess pressure, if you will. The amount you see is fine and I wouldn’t worry!
@rickmayberry96393 жыл бұрын
Chris if you used both gaskets you kind of defeated your purpose the object is to get it perfectly flat but put it together with just enough clearance that it doesn’t lock up or bind one gasket may have done the trick better ....!
@ChrisfromKeyfarm3 жыл бұрын
i only used 1, had 2 just in case it was to tight.
@rickmayberry96393 жыл бұрын
@@ChrisfromKeyfarm just a thought , was just trying to help , your oil pump should have a pressure regulator in it that may have a weak spring in it there are several things you can check before you give up on the ole girl
@ChrisfromKeyfarm3 жыл бұрын
I was curious about the spring held in by the plate, I was wondering about the tension and if it possibly needed replaced. I think I remember reading something about it having to do with pressure relief , possibly if you had to much pressure, and I guess I'm not worrying about that, hahaha.
@TimTurner1153 жыл бұрын
If you can get 5 more pounds out of it it's worth it
@model63823 жыл бұрын
Hey Chris, If you find out your oil pump is still bad...... 13 hp Predator will do the trick.
@winnie24983 жыл бұрын
Hey friend Would u like to make a review video of golf carts lights? Pls feel free to contact me.
@ChrisfromKeyfarm3 жыл бұрын
I got an email regarding the same thing, in the email a clubcar was mentioned, I do not have a clubcar. My ezgo does not currently have lights.
@greasemonkey3483 жыл бұрын
Would love to see an upcoming video of your 212 powered tractor tug of war with farmall c
@ChrisfromKeyfarm3 жыл бұрын
It's probably going to happen
@greasemonkey3483 жыл бұрын
@@ChrisfromKeyfarm that would be sweet to see
@user-lo6cf3df1x11 ай бұрын
Rule of thumb one p s I pre hundred r p m's
@ChrisfromKeyfarm11 ай бұрын
I afraid I'm lower than that, thanks for the information