thank you.

Could u make a vid? I can't find the screw ur talikn about....

I know under the big black thing there’s a screw across the one he unscrewed your have to take the whole cover off and unscrew it and you can take it off!

palletjak jr There are four screws for the top cover by removing those four screws you’ll see two screws holding on the front end removing those two screws will allow you to pull the Front end off

Thx i was struggleing and was probably going to break it

@@rccincy I just broke it

What do you think about mine? kzfaq.info/get/bejne/n7N8aKqglZ6qn6s.html

Yeah still haven't figured out a good way to upgrade the tires. If they would've just gave us a better set a tires it would be a great rear wheel drive car all about the traction at this point until I figure out a mod it would be better to stay with all-wheel-drive

The nitro is kinda like a clutch kick

np 👍

What does the rear wheel drive mod really do? I’m a bit confused because I really don’t know the difference

@@xxvergeecoxx7801 So if we had proper traction which I plan on upgrading or modding the wheels the wheel wheel drive makes it easier to drift and more realistic and scale. It's fine drifting we're all wheel drive that's why the designer that way because the tires don't have that much traction we are working on a man and seeing what I can come up with but either way which ever way you prefer is fine

Np.👍

Thanks 👍

Wilbert Meaway 😂

thanks. 👍

keshon woods thanks

keshon woods try a stronger battery that fits so it will go faster

You’d have to take out the old one and make some room under the hood but BOU does it zoom

I used to have it but my steering motor burend so i returend it for this one but imma get it in the future

Nice i have both r34 and rxy i put in leds in R34

thanks

your welcome. ✌️

Thanks 👍

No problem my guy

ty

np your welcome And thanks for stopping by

Thanks that means a lot

@@rccincy anytime, keep up the great work

👍

Thanks I appreciate that. Got a love the 513

RC Drones And More thanks

thanks. ✌️

@@rccincy the rear wheel drive mod does not work I tried but that is the only one that I undid it just won’t accelerate or anything

@@rccincy but all the other mods work

ty

Honestly it's just a tires typically drift cars are only real wheel drive. This car just honestly sucks and that's it get you a redcat epx Or a different hobby grade car and be done with it.

It's 1/12 scale body so I'm not sure what options you have when it comes to that but I'm working on a wheel mod I haven't found a set of wheels for it yet

@@rccincy have u found any wheels?

thanks

@@rccincy no problem

Thanks for the sub!

true

ty.

No problem 👍

you typically can do it on a hobby grade car not this one it's when you adjust the angle and tow it the way you need it

@@rccincy i was just about to say that

it's all or nothing it it kind of sucks. A hobby grade drift car is about 150 bucks from Amazon I just featured it on the channel and will be doing tons of videos and mods on it

I love when that happens

Is the battery or playtime a long time? I heard the play time is like 10 minutes?

@@Elyas700 it’s like 1 hour and a half for mine

@@cringeski4177 how the hell? Mines like 15 mins

Thanks soo much for commenting this. I had the same problem and it really helped me!!!

np. 👍

I’ll do another mom video soon. Thanks for stopping by

Hey do the battery’s last long for playtime?

A 1/12 scale body is hard to find, And you might be able to find some hobby grade robbers that you can put on the rims that's about it if you're lucky

The mortor just gives the back all the power

You're welcome!

it's 1/12 scale 1/10 scale bodies are to big

Where is the screw located

Where's the screw at ?

What screw???

@@rebeccathompson7230 towards the front of the car, unscrew every screw that holds the plastic cover that’s over the awd driveshaft, take the driveshaft out and put the cover back on, that should work😁

@@rebeccathompson7230 if it doesn’t let me know and I’ll take a look at mine

It's not only the controller but the board Has to be able to do proportional as well

@@rccincy ohhh ok thanks!

np. 👍

It's a brush Motor regardless what battery are using it Only last so long because I just brushed not brushless. The good part is if you buy hobby grade battery and a hobby grade charger later when you upgrade your vehicle you can always use that battery long as you get a good connector that's common for cars. It's completely up to you if you're already on that car it wouldn't cost much to put the battery on it use it for it and then you can save up for 100 car and use the battery already have for it as well so completely up to you

@@rccincy awesome, thanks!

@@rccincy Also what’s a good voltage I should use? I don’t know much about hobby cars, but I’m interested

@@quarans08 i m using a 3s 2200 ma 30c Battery

GOLDBAT 3S 11.1V 3000mAh 30C Lipo Battery with Dean-Style T Connector and XT60 Connector for RC Car Airplane Helicopter Boat Drone FPV and Quadcopter Remote Control Toys www.amazon.com/dp/B07LGZ3TVM/ref=cm_sw_r_cp_api_glc_fabc_OghbGbK9JQMDB

I was looking to do a video on something around that price range maybe I'll look up a few products and get back with you

repent and have faith in Jesus alone He will save you

Yo make a video of this?

Yes, of course, you can mod anything

sorry I didn't understand what you were saying. but looks like The last word is drift and I do have a video for that on my channel. ✌️ kzfaq.info/get/bejne/bdibf6uGq66bmnU.html

thanks

That's a lot of work you need to post a video Of everything working and I'll share it.

Back in the days when people had to use pens and paper or landlines in the family kitchen to communicate I got tired of tyco rc cars being just one step behind hobby grade in the electrtonics and motor area ...so ide make trips to the hobby shop one upgrade at a time witch was 50 miles away and my family traveled every two weeks on Saturdays . I earned my allowance and was given 15 minutes to go in the hobby shop and buy my part ...so I would plan it out carefully ....what made it so hard was there was no internet I only had knowledge of hobby grade rc cars because I watched my uncle run his tamiya mud blaster a few times and took mental notes of how it was built so hit and miss factor was a bitch but within a summer I was able to mod the tyco bandits and hammer along with nikko rc cars to be cable of amazing speed ,run times prolonged , handling and way stronger ....mechanical speed controllers and recievers over a circuit boards, 370 motors , steel ball bearings over white plastic bus bushings inserts , servos over whatever that magnetic sorry steering box ...ball joints and adjustable control rods over wire bent and stuck in a plastic hole and of course oil dampend shocks , back then hobby grade rc cars usually had 4 double AA batteries to power the servos and a 7.2volt battery pack for the motor... Because tyco did not run full power to the motor it was cut down I think by almost half and 9.6 v battery's were the power and god forbid getting the circuit board wet one drop of water and smoke show with malfunction nervouse twitch type thing when you turn it on ....not repair friendly unless you were the aashole that came up with the design .... So ide fix all that nonsense because I could not afford a nice new mud blaster and I love rc anything . It's the same now to .my current rc is an exceed 1/10 brushed rally short course monster truck ....was brushed that is ....it's 3s brushless motor and esc and some other mods ...it cost 149.00 rtr. And ran at 23 mph......now it's at 210 dollars and it's all pavement lowered and grabs 53 mph if it can keep it's footing ......it will burn the tires sideways at 35 mph and go into drift mode .... I'm learning how to handle it. .. so buy a cheap rc and mod the fuck out of it .....amazon cheap. ..lol.

Back in the days when people had to use pens and paper or landlines in the family kitchen to communicate I got tired of tyco rc cars being just one step behind hobby grade in the electrtonics and motor area ...so ide make trips to the hobby shop one upgrade at a time

Honestly I'd be hard to get the proper dimensions and then you got to figure out the three cell that it's running it's pretty powerful and you need the motor and I can handle it

You might melt plastic with a stronger motor which will cause the motor to shift and then the gears won't mesh right anymore, if at all. I put a 3s 50C 5000mah battery with a sidewinder 3 on stock motor and it worked for about 6 runs. If I wouldn't have ran it for an hour straight each run, it'd probably still be working

@@lucky7s94 Honestly I never change the motor or the ESC. All I did is make a connector and connect a 3S 2200 mA 30c battery and it works fine

Right, I was just letting the guy know if the plastic gets hot, it will warp

@@lucky7s94 Oh okay. 👍

go to my channel and i have a few videos on it and mods

Honestly I would leave it all wheel drive because the tires that I went through all that trouble to upgrade it's just good for track not drifting. The best thing to do is to remove the front and back bumper to make it look better. Lower it a little bit and then do the bigger battery mode. that's what I recommend look on my channel for the last video I did on this particular car and it will show you all the mods .

Amazon.com banggood.com Local hobby shops and online hobby shops.

It'll be a little bit of work but it's definitely doable

Got it apart and thanks I'm going to stop up at hobby shop tomorrow. Def would be pretty badass! Connected 12t titan motor to it and it ran pretty fast especially when I hit turbo button. But it's way to big to fit in there.lol

Referring to My dog yes

Nope because it's not 1/10 scale. It's smaller like a 1/12

If anyone has the same problem take off the battery cover and it reveals a second screw you have to undo on the new models

4 screws for top cover and 2 for front end and 2 for back end to come a part

there s 2 per side

😂 thanks.

gregory vega I ll done a follow up on this video

Rc Cincy I figured it out. Thank you though. The problem now is that when I go to drive the RC car it’s turning left.

gregory vega how did u get it off mine isn’t coming apart either

gregory vega I need help opening it 😔

Ohio at 39.99 at target and Walmart

The car is 1/12 scale so there's basically nothing out there That I could find

@@rccincy ok tysm bro god bless.🙏

Killer4Life210 I personally haven’t had one yet but I hear the steering servo Is twitchy And the shocks are not that good. Those things will be very easy to fix depends how much it is?

Rc Cincy it is $40 bucks

Rc Cincy can you make a video and how to do stuff like that

Killer4Life210 It’s either 30 or 40 it’s been a while since I bought one just shop around at different places.

Killer4Life210 I’ll end up getting a hobby grade car just like the one you’re looking at And I’ll do a video on changing servos and other mods like that

remove all the screws on the top and front end.

Rc Cincy ok

That’s a good idea. I ll have to try it . Thanks

3s 30c

Thanks

Yeah it's just a Phillips screw

Thanks so much I have one and I wanted to change the wheel thanks I have a lot of ex cars thanks so much

@@Jake2812yt np ✌️

So if it's the same size as the other one they're all the same exact vehicle underneath just different bodies long is the same size. It's just a shell so they perform really well for a toy

if you buy cheap $10 hobby grade rubber wheels will actually fit on there but the problem is he won't be able to dress because I'll have too much crap it'll be more of a track car. Is it the plastic driveshaft or the metal one?

@@rccincy plastic

@@rccincy Ik I’m asking a lot of questions, but, what size tires should I get? Is 1/10 a size?

@@rccincy 4X RC Tires & Wheels Rims Sets Y Shaped Width:26mm 12mm Hex Drive Hub for 1/10 Scale On Road Touring Racing www.amazon.com/dp/B01MTSMNAZ/ref=cm_sw_r_cp_api_glc_fabc_UDgbGbSNP7AJ1 when I upgrade the battery, could I mod these on? Might be able to just screw them on

GOLDBAT 3S 11.1V 3000mAh 30C Lipo Battery with Dean-Style T Connector and XT60 Connector for RC Car Airplane Helicopter Boat Drone FPV and Quadcopter Remote Control Toys www.amazon.com/dp/B07LGZ3TVM/ref=cm_sw_r_cp_api_glt_fabc_BRZ9GWMVY2HKBMNJBQ8J?_encoding=UTF8&psc=1

do you want at least 2200 ma-3000ma and the one I put all my time and tested was only a 30 C

Right now on awd and once i do a wheel mod probably preference

no i did a video how to do lights for 6 bucks plus a hot glue gun. its on my channel.

There's more screws under the middle cover take that off and you will see the other screws holding front on.

no only if you get a used one

I haven't found anything that fits right out of the package I might have to mod something to make it work

It depends on your budget,,,,

@@rccincy what id i have a 70-100$ budget

I did a video on how to fix the steering on it. But to be honest with you I think the plastic linkage in there as a metal peace that acts like a spring and pushes it back to center it just popped out of it you have to take it apart and pop it back in

@@rccincy Thanks a bunch man, i fixed it, your awesome, most definitely subbing after this

You need a servo and fully proportional remote for that. Definitely hobby grade rc car.

Yes long as it’s a 1/10 scale body

Rc Cincy thank you so much I just ordered one and wanted to put a 240sx shell on it I wasn’t sure if I could but thank you!

Rc Cincy I subscribed

3s 2000ma-4000ma 30c

Unfortunately I went through several well mods and what they provide is the best for all wheel drive currently

It happens I almost did it myself that's why there's always a risk to modding. I actually did a video on repairing the steering by soldering the wires. They have really cheap soldering kits on Amazon or they do sell them at stores as well. I did a video on the steering repair on my channel. I also recommend getting the soldering kit that teaches you how to Sauter onto a board and it comes with a soldering gun and everything you need. Those are really cheap and it's nice to learn how to Sauter so you can do lots of other mods. i'm sorry that happened that's a risk to modding. I'm going to make a short video showing you exactly how to man and repair everything with me better details soon.

@@rccincy thank you :D I will definitely be checking that video out. My dad has a soldering gun.

@@bali_flipz6304 It should be a easy Soldering job for him considering that it already been tind on the board and the wires just re-solder them. Let me know how it turns out.

No it's not you did something wrong

Don’t worry. It’s NOS 😂

Walllz Yeah definitely looks better lower

@@rccincy tried a custom roll on mine and messed them up 🤦‍♂️

Or you could always trim it a little bit make sure you make both sides of even though

Watch the newest build series On my channel

Exquizite Animations look at Walmart target or even amazon

yeah I'm still working on a mod

@@rccincy ok thank you

I haven't got a chance to get that yet but if I do I'll let you know

11.1v I have tested for over two years now with no issues

nice

I got the rx7

@@txxmariioo nice

Same

@@miata-tg2nm nice