went "half hobby grade" with the Veil Side, WLtoys A959/979 receiver+ESC and servo, 380mah 3S powering it. the servo gives 90-95% of full steering lock, good enuf! its a little "fun" to cut the hole for the 5 wire servo fits upside down in front, connect it to the steering bar and close it back up, but not too bad. the small LiPo fits same place as stock battery (with a little clearing), a hole cut into the "charging bay" for the 1/4 x 1/2 balance charge plug to reach into. the extra 1.5 to 2.5v of Lipo vs stock lithium ion 9.6v, plus the higher current output is a nice boost, lots more fun with fully proportional throttle and steering.. which is only a little bit slow not horrible. went there because I had the inexpensive spare WLtoys stuff already, and already know its OK with 3S through it, as long as the motor demand isn't TOO high. not done video of it yet, hopefully soon tho. may bump up to about 700mah 3S LiPo soon, don't want to run too much weight on the 12v 370/380 motor. there's no room to stuff a 390 motor into it unfortunately, the bevel gears for the front power wont allow the larger motor.
@rccincy3 жыл бұрын
Very nice modding. I would love for you to share a link of a video or at least pictures. I can truly appreciate that I know how much work it takes. It is totally worth it them on something and make it better it makes it a lot funner especially if it works really well. Thank you for sharing that with us and appreciate you stopping by
@modelnutty65033 жыл бұрын
@@rccincy thanks, for a slap together it works out pretty nicely, huge difference vs stock even though its still just a toy grade sled. hard to go wrong with no diffs AWD drifting, the little WPL drift truck is set up like that too if you've seen the run video.
@DicertoC2 жыл бұрын
So I have no idea what any of this is. Do you have a break down of what he added and what you added so I can search for all these parts and battery? I have a hobby store around the corner and I know if I go in with this car and say “so I want to…” they’ll probably look at me like I’m crazy for not even knowing the items I need. Lol
@bottomofthebarrel_fb3 жыл бұрын
So will any 1/10 scale body fit this platform? I know theyre not hobby grade, but when youve got 4 car guys that all have a jada car of their own, ive gotta be the one to modify mine
@rccincy3 жыл бұрын
1/10 scale body does not fit because the car itself is a 1/12 scale platform. i've looked everywhere and have not found anything so far that's 1/12
@christopherogden49043 жыл бұрын
@@rccincy I got Pro-Lines 1972 Chevy C-10 body to fit. Looks good to scale on it too. Part # 3251-00 1972 Chevy® C-10™ Clear body for Stampede
@rccincy3 жыл бұрын
it's a 1/1: scale car so the 1/ 10 scale body would be bigger
@otherworld93442 жыл бұрын
The jada rc doms charger is 1/12 scale so i modded mine for the drift car chassis it works good
@marcelloalbertvilla93982 жыл бұрын
Oh really
@ferrafranko2 жыл бұрын
I got the same mustang and this man just flexed on me so hard with this
@Texasbroski5123 жыл бұрын
Only thing ive done was wrap the front tires in electrical tape and i can get into drifts in tight spaces like my kitchen and it's awesome
@rccincy2 жыл бұрын
I've heard of that before
@corellioncrusaderproductio46793 жыл бұрын
I just picked up two of the fast and furious mustangs, for a rather ludicrous project. How would this hold up with rubber wheels on the street? I'm in the process of assembling an R2-D2 replica, utilizing two of these cars (one in each main leg). I'm slightly concerned that if I use a flat out stock model, the wheel mounts will wear out due to it being held on by a single screw. The robot is R2-D2, so I think you'd get a pretty good idea of the weight distribution. I've already done some crude weight tests, and one of the cars was able to do pretty decently with quite a bit of weight on it. I didn't want to spend an arm and a leg on the wheels, so I figured I'd go the cheaper route and we'll see how it goes. I appreciate it!
@rccincy2 жыл бұрын
Honestly I watch the latest video on my channel I gave the best for mods in my opinion. Where was originally designed I hate to say it for a drive they were better but I have tried my rubber tires on it and it's more of a track car not a drift car
@Luke.Schmieder2 жыл бұрын
@@rccincy hey! I was wondering where did you get your LED’s? Also is there anywhere I can get some better rims?
@darwishhussaini15484 ай бұрын
Hi
@vitodambra722 жыл бұрын
Hey buddy just wondering if you can share a link where i can get the light pack from, thanks again for the great video. Love all your content. Hope you keep doing more RC mods and reviews 💯😉👍🏼
@rccincy2 жыл бұрын
Led String Lights, Sanniu Mini Battery Powered Copper Wire Starry Fairy Lights, Battery Operated Lights for Bedroom, Christmas, Parties, Wedding, Centerpiece, Decoration (5m/16ft Warm White) www.amazon.com/dp/B072NH2FQ1/ref=cm_sw_r_cp_api_glt_fabc_6SJX42375071HXXWTQC5
@djviper22323 жыл бұрын
Hey man I’m a new sub I like how you love rc cars and I’m getting into could you put a link for the battery I would love to mod my rc car that I got
@luislll58423 жыл бұрын
Also if u want u can put little spacers from a bike u have to take the brakes off. U can stick the wheels out a little bit because for me the body is just to wide and the wheels look tiny so if u like looks out some spacers. And make sure u light up your wheel or it will spin weird and probably break your car
@comptonbornraised58733 жыл бұрын
what do you mean?
@luislll58423 жыл бұрын
@@comptonbornraised5873 stick the back wheels out
@icyyfnhp3 жыл бұрын
hey its me "just some kid" its a alt acc
@luislll58423 жыл бұрын
Oh yeah if u put all grip tires and don’t change the battery. U can burn something it the car I’m not sure exactly but the motor that it has in not the best u can burn it out
@modelnutty65033 жыл бұрын
yep, its only a little 12v 370/380 size motor. no room for installing a 390 that would give more rpm+torque.
@rickrolled70362 жыл бұрын
Wanted to put a new body on my Jada rc car and looking at 1 of the comments I found a 1 12 body should I put it on
@rccincy2 жыл бұрын
That's the closest size I think 1/10 is definitely too big so you're on the right track. Let me know if it fits
@jorgefaz42312 жыл бұрын
if I did want to put in rear wheel drive where would the screws be?
@rccincy2 жыл бұрын
Why do you remove the body they'll before on the main shell and then two more on the front slide it out carefully so you don't pull the string wires out and just remove the driveshaft
@jasonrodriguez2932 жыл бұрын
I need help my jada tv car camero the gears all fell out and idk where there supposed to be I have all the pieces but the idk where to but the gears please helppp
@rccincy2 жыл бұрын
honestly it's just about fitment and turning him in different position and just making sure the gears mash and turn. there could be small bushings and honestly should only fit one way if it doesn't turn it's not correct.
@spacecadetmedia3 жыл бұрын
hi i just got the same mustang myself not really a hobbyist but I was thinking if it would've been possible to just plug in the USB cord for charging into a battery bank and use it for longer run time an maybe extra power?
@rccincy3 жыл бұрын
It will only charge it
@ElDelBeeptus Жыл бұрын
Do u know where can buy another body for my car so that I could switch them? Or like any other bodies that could work for them?
@rccincy Жыл бұрын
unfortunately, it's a weird size. I couldn't find anything to fit it. The only difference between all the models is the bodies so unfortunately we can't buy just the body.
@ElDelBeeptus Жыл бұрын
@@rccincy okay, thank you!
@jerrysmith71663 жыл бұрын
You can get some legit hobby grade Drift cars off bang good Or Amazon for what you pay for that maybe a few bucks more but it's well worth it Is proportional steering 4 wheel drive and fast as hell
@rccincy3 жыл бұрын
Yeah I got a red cat racing on that's pretty legit you can also get the RMX 2.0 ready to run that's pretty good. This is just a budget for my car
@spaghettipizza473 жыл бұрын
Bought mine yesterday mine drifts on the street and in the kitchen tile floor I took out the drive shaft soon as I got home home I did a lot of mods but that was the first one I did I might put in the drive shaft back in juts to see if it drifts better but tbh I don’t need to works just fine for me🤷♂️
@rccincy3 жыл бұрын
Yeah after several tests, and mines I ended up just only doing 4 mods which are removing the bumpers front and back, Slamming the car, upgraded battery, lights
@BodyWeakDotNet Жыл бұрын
Awd Mod is the Best for Drifting....I took the shaft out tested it and i noticed AWD was Way Better..
@kevinpascal38653 жыл бұрын
I want to do the battery mod can you please tell me wich exact battery to use or wich you used?
@rccincy3 жыл бұрын
it's a E flight 3S 2200 mA 30c There is a much cheaper substitute that's basically the same battery on Amazon delete flight batteries are kind of expensive and are approaching $30
@rccincy3 жыл бұрын
GOLDBAT 3S 11.1V 3000mAh 30C Lipo Battery with Dean-Style T Connector and XT60 Connector for RC Car Airplane Helicopter Boat Drone FPV and Quadcopter Remote Control Toys www.amazon.com/dp/B07LGZ3TVM/ref=cm_sw_r_cp_api_glc_fabc_u5XaGb4WANF1X This battery for 17.99 + tax in your area and for me it's one day shipping honestly the other one is like $28 plus tax so extremely similar
@jeremyahyisraelrobinson77913 жыл бұрын
i have black version if cincys mustang i stole his twin XD
@rccincy3 жыл бұрын
😂
@paulgamblr43883 жыл бұрын
Were can u get replacement jada drift tires hard to find on website
@rccincy3 жыл бұрын
Every Jada car you buy comes with the second set. I haven't seen any replacement tires for it anywhere yet sorry.
@mr.anonymoose28102 жыл бұрын
i have the mustang drift car, but the post holes on the right side, the fenders and the wheels don't line up, and the wheel rubs on the inside of the car body and ruins the paint can anyone give me tips on how to fix this pls
@rccincy2 жыл бұрын
Touch up paint from the inside and adjusting the nouns with modification.
@uzisolar63643 жыл бұрын
Did he just say Mazda wrx
@rccincy3 жыл бұрын
I may have a accident but yes I know WRX is made by Subaru and Mazda RX7 is probably what I meant to say
@hookandpull8563 жыл бұрын
I am glad at least one person noticed that.😑
@comptonbornraised58733 жыл бұрын
Can i paint the bodys? I dont really like the supra body too much toyish sticker styles on it lol... Do i paint inside or outstide?
@rccincy3 жыл бұрын
It's already been painted you paint those like somebody's on the inside so not sure how you can do that
@FuknJulian3 жыл бұрын
you sand down the inside or remove the paint with a knife and repaint the inside, its easier than you think
@Doft_moto3 жыл бұрын
Is it possible to go higher then 2200 and what is the highest that i could do?
@rccincy3 жыл бұрын
Long as it's a 3s 30c you could go up to 5200 Long as you can get the body shell on
@umakemeYaxXx2 жыл бұрын
can all jada boards take a 3s? like the jurassic park jeep
@rccincy2 жыл бұрын
Honestly it depends what battery it's originally running. I never open that one.
@djviper22323 жыл бұрын
Can you put a link for the battery and where could I find the charger for the battery
@kevinpascal38653 жыл бұрын
I have the rx7 and it’s awesome
@rccincy3 жыл бұрын
Yes it is
@shawnsanders21882 жыл бұрын
Try it with a 3s
@rccincy2 жыл бұрын
That's what I run is a 3S 2000ma 30c
@BentleysBassin3 жыл бұрын
Could you put a link to the battery and adapter in the description pls
@rccincy3 жыл бұрын
I could put a link for the battery but I made the adapter
@BentleysBassin3 жыл бұрын
Yeah if you could do that it would be great
@juanparra99922 жыл бұрын
I have the fast and furious one would it be possible to make it 2wd?
@rccincy Жыл бұрын
honestly, it needs four-wheel-drive to drift at least with this particular wheel set up
@creemastee25543 жыл бұрын
Would a hobby grade 1/10 body fit on the fast and furious gtr chassis?
@rccincy3 жыл бұрын
No sorry they're too big the GTR is 1/12 scale I think or something weird like that
@creemastee25543 жыл бұрын
@@rccincy damn lol, okay thank you, and when are you gunna do a tire mod test drive vid?
@rccincy3 жыл бұрын
@@creemastee2554 I Kinda did that behind the scenes and I'll show you guys it's more of a track vehicle than a drifting vehicle. Will make a better one and share it with you guys and share the end result video Of me drifting with the final set up
@creemastee25543 жыл бұрын
@@rccincy can you do a better tire mod for drifting, please?
@ilakiyan_t3 жыл бұрын
hey man im a little late to this video but I got one of these yesterday and I wanna upgrade the battery, is a 7.2v 2400 mAh one good? or will it cause problems?
@rccincy3 жыл бұрын
The battery that's in it is 9.6 V so technically you'd be lowering the voltage on it. I run 11.1 V on mine which is a 3S
@ilakiyan_t3 жыл бұрын
@@rccincy true, how do i know what they max voltage i can put on my car is? i have the fast and furious supra
@ilakiyan_t3 жыл бұрын
also, does it matter how many cell it is?
@rccincy3 жыл бұрын
@@ilakiyan_t Yeah, The factory has a 3s 920mA battery.
@rccincy3 жыл бұрын
Factory one is 9.6 V
@KLS_JSTN3 жыл бұрын
Why aren’t you driving it on your channel
@rccincy3 жыл бұрын
I have some in the works
@KLS_JSTN3 жыл бұрын
@@rccincy oh ok
@HitmanKingJay3 жыл бұрын
I turned my GTR into KV Brushless 380 combo
@rccincy3 жыл бұрын
Nice I would love to see that
@lucagondolfo69283 жыл бұрын
Would a upgraded turn motor make the steering more responsive? I have the rwd mod and that’s it my only complaint is the steering lag and how little the angle is
@rccincy3 жыл бұрын
honestly the only way to make it better is to install a servo that has proportional steering and make it to where it has a better turning angle which takes a lot of work. I'm looking into a all-in-one yesterday and receiver with a controller that we can get throw it in there with a steering servo and be done but honestly it's so much work and so expensive that for the total cost of everything you can just buy an entry-level hobby grade car. Don't get me wrong I love these Jada cars for the price
@lucagondolfo69283 жыл бұрын
@@rccincy yeah that’s why I’ve been trying to mess with this one because it’s not something I do often enough to justify buying a expensive one
@rccincy3 жыл бұрын
i'm looking into a cheap Two in one which is the ESC and receiver with a controller combo and it has a three pin connector for a servo on it. Maybe something like that can be done for a reasonable price. And some of those or even proportional
@grandmajuice10473 жыл бұрын
Hey im just starting to try to mod my rc car and i have no knowledge what so ever on how to do a battery mod or anything so i was wondering if u could help?
@rccincy3 жыл бұрын
It's kind of tricky honestly you have to make a connector if you don't feel comfortable doing that and ordering a different battery that I probably wouldn't do it. I have several newer videos on the car. if you feel confident go to my channel there's several newer videos on the car
@grandmajuice10473 жыл бұрын
@@rccincy Do you think you could possibly make a video on how to do that? Or send me a link to a video that explains it?
@rccincy3 жыл бұрын
@@grandmajuice1047 Just go to my channel you'll see several videos On this car and mods the newer ones are better
@grandmajuice10473 жыл бұрын
@@rccincy Ok thanks
@otherworld93442 жыл бұрын
My profile pic is the rx7 i mod about 2 years ago just head / tail lights and underglow nothing crazy... Just got the blue Mustang gt for more practice 👌👌
@rccincy2 жыл бұрын
nice
@shanearsenault90163 жыл бұрын
Can u recharge the battery through usb?
@rccincy3 жыл бұрын
Once you change the battery you need a different charger you cannot use the factory one. The factory charger is only for the factory battery
@alsulysikova55383 жыл бұрын
I have same car but I’ve got a problem. When I start car it is going left and right by it self. So it’s not going straight. How can I fix that?
@alsulysikova55383 жыл бұрын
I tried changing wheels but it didn’t help
@rccincy3 жыл бұрын
The only adjustment we have unfortunately is the little tab on the bottom side by the steering and you can only click it to the left or right adjusting the steering other than that it should get back to Center on its own unless that spring popped out that keeps it on center
@alsulysikova55383 жыл бұрын
@@rccincy didn’t help :c
@rccincy3 жыл бұрын
@@alsulysikova5538 Sorry to hear that that's the only way you can trim those is the stupid mechanical trimming underneath by the steering by moving out in the correct direction that's the only thing you can do for those types of cars. Sorry I couldn't help more
@alsulysikova55383 жыл бұрын
Rc Cincy ok thanks
@D_money5way2 жыл бұрын
how low do u put the screws I can't tell how low or high
@rccincy Жыл бұрын
I would just go in one whole down and test it to see if it rubs and go from there
@xls47502 жыл бұрын
Where can I get some wheels that would fit
@rccincy2 жыл бұрын
honestly I've ordered several sets and then all kinds of Modifications and in the end it's designed the all wheel drive plastic wheels on it and that's the best way it works if you watch the latest video on this product I gave a list of the best mods you should do in the end
@jaredsay33313 жыл бұрын
What about putting a servo to control steering
@rccincy3 жыл бұрын
Can be done a lot of work though.
@rccincy3 жыл бұрын
you would have to get rid of the control board replace it with your own receiver, your own ESC for the motor and your own servo. I don't think it's worth all that trouble you wold be basically changing the entire car.
@pabloguerrero75603 жыл бұрын
Does it have proportional steering?
@rccincy3 жыл бұрын
no I wish
@nabil9246 Жыл бұрын
battery and connector links?
@rccincy Жыл бұрын
in the revised bill series, there are lynx in the description
@anthonycap4223 жыл бұрын
How do you buy or make the adapter
@rccincy3 жыл бұрын
I did a video that connector on my channel just go to it
@luibui4914 Жыл бұрын
Can i put a 2s 50c batter in it
@rccincy Жыл бұрын
i've tested with 2s 30c. I don't see 50c drawling enough to burn itself out. I would think so. It should also give a little more pep
@Xzoomi3432 жыл бұрын
Hey anyone know how to put the front wheel gear thing back together
@gxoticbirds92823 жыл бұрын
Where you located
@rccincy3 жыл бұрын
Cincinnati
@corgikyle77803 жыл бұрын
can you do a tutorial on the battery mod?
@rccincy3 жыл бұрын
Long as you have three cell battery in the connectors of your choice it should be very easy to do. And then make sure that you have a charger for that battery. It does make a huge difference and it's totally worth it. I'll come up With a video on how to make battery connectors
@skulghost76023 жыл бұрын
I just got this Drift car and I don't know how to take the bumbers off?
@rccincy3 жыл бұрын
I had a couple videos on the Jayda car and mods. Just go to my channel and you'll see them. Hopefully it help out if not reach back out I'll try to do A recap of all the mods I did and how it was done
@skulghost76023 жыл бұрын
@@rccincy Okay, thank you!
@rccincy3 жыл бұрын
@@skulghost7602 np
@joeymax3 жыл бұрын
Can u put the links to the lights and battery
@rccincy3 жыл бұрын
If you go to my channel and look for my newest video on this product. I have the four best mods With links as well
@luisfuentes14662 жыл бұрын
What battery is that
@rccincy2 жыл бұрын
it's a 3S 2200ma 30c Battery
@devonslegends19853 жыл бұрын
What kind of battery is can I put???
@rccincy3 жыл бұрын
3s 2200 mA-4000mA 30c battery
@devonslegends19853 жыл бұрын
@@rccincy Thank you for responding much appreciated! I been trying to mod my drifters for a while because I have the skyline, mazda, and the supra I've been watching other videos but this one helped most I already ordered everything. Thanks again!
@rccincy3 жыл бұрын
@@devonslegends1985 np. 👍
@alejandroortega91663 жыл бұрын
Where did you get that battery
@rccincy3 жыл бұрын
Amazon I had a link in original mod video
@jasonsanchez50573 жыл бұрын
What battery is that????
@rccincy3 жыл бұрын
3s 2200 ma 30c Brand really doesn't matter all made in China
@jasonsanchez50573 жыл бұрын
@@rccincy thanks dude
@rccincy3 жыл бұрын
@@jasonsanchez5057 np
@itsblingy91863 жыл бұрын
did you make it rwd
@rccincy3 жыл бұрын
I did and in the end it worked out better as a four-wheel-drive vehicle because it's toy great it's not like a regular hobby grade car that'll easily mod. Watch the last video I did on it which will give you the best mods. What I did was remove the bumpers add lights lower the vehicle as much as possible without rubbing and doing the battery mod.
@itsblingy91863 жыл бұрын
@@rccincy mine doesn’t really drift well I think it’s to fast wit the little control
@rccincy3 жыл бұрын
@@itsblingy9186 Do you use the turbo button
@itsblingy91863 жыл бұрын
@@rccincy yeah it’s just hard to control in a drift
@rccincy3 жыл бұрын
@@itsblingy9186 Yeah I know not having proportional staring in throttle really makes it hard that's why a lot of folks by the hobby red ones which have much better control.
@fidelflores88682 жыл бұрын
Where can i get the battery
@rccincy2 жыл бұрын
Amazon
@rccincy2 жыл бұрын
Give me a little and I'll find a link
@rccincy2 жыл бұрын
Zeee 3S Lipo Battery 3200mAh 11.1V 50C Soft Case Battery with Deans T Connector for RC Airplane Helicopter UAV Drone FPV RC Car Truck Boat www.amazon.com/dp/B0925V1G8P/ref=cm_sw_r_cp_api_glt_i_JD00N32XZPCVHFK29XG0?_encoding=UTF8&psc=1 this was the best deal and it's a nice size. No matter what you're gonna have to make a connector.
@fidelflores88682 жыл бұрын
@@rccincy thx
@rccincy2 жыл бұрын
np
@ohhrxzrr49253 жыл бұрын
What are the lights called, idk what to type into eBay
@rccincy3 жыл бұрын
Battery operated LED String lights. I put a link a while back on Amazon for them I'll see if I can find it.
@rccincy3 жыл бұрын
Tasodin led Fairy Lights Waterproof 16.4ft String Lights Battery Operated for Wedding, Home, Garden, Party, Christmas Decoration (1pc, Warm White 1pc) www.amazon.com/dp/B082D5CPNW/ref=cm_sw_r_cp_api_glt_fabc_PTA049GQA0CH3QT4M6FW?_encoding=UTF8&psc=1
@ohhrxzrr49253 жыл бұрын
@@rccincy what size are yours because I can only find long led lights and then my car feels too heavy
@rccincy3 жыл бұрын
@@ohhrxzrr4925 I shared a link for the lights that I use are basically the same exact thing the length doesn't matter because if you watch the video Eliminated LED lights of the ones i don't need and remove the rest. the battery pack you just double-sided sticky tape to the body on the inside and the weight of that two batteries and the case is nothing for that car unless you used completely different lights then i m not sure what you mean
@FuknJulian3 жыл бұрын
why does it say its a 1:10 scale if its a 1:12
@rccincy3 жыл бұрын
where does it say that?
@rccincy3 жыл бұрын
I I have four 1/ 10th scale bodies and have probably another 10 in the past I physically try to put 1/ 10th scale body on the car it is way too big. I am 100% sure that it's 1/12 scale
@FuknJulian3 жыл бұрын
@@rccincy it says it on amazon and also on the box i belive
@rccincy3 жыл бұрын
Well I physically have three of these cars and have more than three bodies and they do not fit at all it's not even close. That's a situation where the manufacturer is wrong