Fast, Easy, Hair Whittling Edges With Work Sharp New Rolling Knife Sharpener

Рет қаралды 288,799

Күн бұрын

THIS IS THE WORK SHARP ROLLING KNIFE SHARPENER, THIS IS AN EASY TO USE SUPER FAST KNIFE SHARPENER THAT GETS INSANELY SHARP EDGES VERY QUICKLY. IN THE VIDEO I REVIEW THE WORK SHARP ROLLING KNIFE SHARPENER AND TALK ABOUT THE UPSIDES AND DOWN SIDES TO THE SYSTEM. AS ALWAYS ITS AN HONEST REVIEW.
WORK SHARP SITE
www.worksharpt...
MORE WORK SHARP SHARPENERS
shrsl.com/49wd0
WORK SHARP AMZN
amzn.to/44a5v4z
.............KNIFE DEALERS I RECOMMEND AND MUCH MORE BELOW.........................
HAPSTONE SHARPENING SUPPLIES
bit.ly/3Q4Okfw
WORK SHARP STORE
www.worksharpt...
JOIN OUR MEMBERSHIP TO LEARN KNIFE
SHARPENING AND MORE
/ @neevesknives
NEEVESKNIVES STORE & SHARPENING SUPPLIES
www.amazon.com...
TOOLS FOR GENTS STORE
toolsforgents.com?tfg=7972
ARTISAN KNIVES
shrsl.com/43mr4
KIZER KNIVES
shrsl.com/47agj
KANSEPT KNIVES
shrsl.com/47agm
BLADE HQ
shrsl.com/3qffz
GP KNIVES
shareasale.com...
POLISH CUSTOM KNIVES
shrsl.com/47s3x
URBAN EDC SUPPLY
urbanedcsupply....
SMOKEY MOUNTAIN KNIFE WORKS
www.pntrac.com...
DEFCON TACTICAL KNIVES
www.defcon-usa...
BLADE OPS STORE
bladeops.com/?...
KNIVES SHIP FREE
shrsl.com/3y136
KATSU KNIVES
katsuknife.com...
KAVISO
www.kaviso.com/...
MOJAVE OUTDOORS GEAR (10% OFF)
www.mojaveoutd...
DISCOUNT CODE : Neeves knives
VOSTEED KNIVES
shareasale.com...
ORIGINAL GOAT
SAVE 15% USING MY AFFILIATE LINK
originalgoat.c...
OR USE 15% DISCOUNT CODE (NEEVES)
TKELL KNIVES
tkellknives.com...
............PLEASE READ..............
MAXACE use (NEEVESKNIVES) at checkout for 10$ off any Maxace
maxaceknife.com/
KPL HEAVY AND ORIGINAL
amzn.to/3kmN8DT
KPL MAINTENANCE KIT
amzn.to/37OwKJJ
ALL LINKS AVAILABLE ABOVE ARE AFFILIATE LINKS
ppl CONSIDER VISITNG OUR PATREON!
ON PATREON Every tier will always be eligible for giveaways. We appreciate all of you for watching our content and supporting us!
PATREON LINK: www.patreon.co...
To donate, contact or just have some good 'ol knife talk with the Neeve's DM us on Instagram @neevesknives
LINK: ....
OR
Contact us by email at neevesknives@gmail.com
Instagram: Neeves Knives
NeevesKnives Paypal: jrneeve@gmail.com

Пікірлер: 354

@maxlvledc 10 ай бұрын

I like how you planned out this video so we were getting info while you were completely sharpening the knife with no speedups. well done!

@NeevesKnives 10 ай бұрын

thank you for noticing

@alamomonkey 7 ай бұрын

I see you @maxlvledc ! 😆 First time I saw these, I wondered how it’d work on conventional multi-tools & thought of you! Cheers mate

@maxlvledc 10 ай бұрын

I love how worksharp completely outclassed the competition, multiple angles, multiple plates...right on.

@BinaryClay 9 ай бұрын

Not much different from Horl2? Let's just say that they probably were "inspired" by the Horl ;)

@caldwell5078 3 ай бұрын

You are kidding right? Work Sharp is always garbage! The diamond abrasives fall off immediately and the ceramic disc is a joke. This dude gets paid to say otherwise! I bought the work sharp, Hone, generic and Tumblr. The Hone was the best by far.

@peetiegonzalez1845 10 ай бұрын

These rolling sharpeners are (wait for it...) revolutionary. I bought a set off Aliexpress with 2 diamond and 3 ceramic stones. It's so easy to keep your angles, which I had a lot of trouble with freehand... and it's so much more simple than the fixed angle jibs.

@TheRodT 10 ай бұрын

hmmm. I might do that

@AnomadAlaska 10 ай бұрын

*revolutionary... (groan)

@BuzzingGoober 10 ай бұрын

Still overpriced af for clones. Needs to be $20-$30.

@martinthompson2425 10 ай бұрын

Hahaha! I saw how you did that! “Revolutionary!” 😂

@calebwhite6173 8 ай бұрын

⁠⁠@@BuzzingGooberI’m sure they will come down in the future. Wait for Walmart. Plus not a ton of know about this.. demand up price goes down. They will be $15 in another year.

@NeevesKnives 10 ай бұрын

WORK SHARP STORE www.worksharptools.com/?rfsn=7338495.bb5857 AS ALWAYS THIS WAS AN HONEST REVIEW, WORK SHARP DID SEND THIS PRODUCT TO ME REQUESTING AN HONEST REVIEW AS WORK SHARP ALWAYS DOES. THEY HAVE NEVER ASKED ME TO SAY ANYTHING IN PARTICULAR WHAT SO EVER WHICH IS ANOTHER REASON I LOVE WORK SHARPS PRODUCTS, THEY APPRECIATE HONEST FEEDBACK, OF COURSE IM CRITICAL OF ALL SYSTEMS AND IN ALL REVIEWS REGARDLESS HOW MUCH I LOVE THE COMPANY. THANK YOU FOR WATCHING.

@timtitus2532 10 ай бұрын

I appreciate you bringing these systems to the attention of your viewing audience. Your critique and suggestions are invaluable. Thank you, Jerad

@ianbaker4295 10 ай бұрын

Ah yes. Finally something that I could give to someone and explain how to use without their eyes glossing over.

@k.b.woodworker3250 17 күн бұрын

Thank you! Excellent video. I used to sharpen chisels and blade planes, using a guide to get the angle and stones. Still have them. Been looking at sharpeners for my kitchen knives, and just want simple and easy. The worksharp is priced reasonably. So, I'll likely go with that one. Thanks so much!

@NeevesKnives 17 күн бұрын

Yeah I would say it's my most recommended rolling sharpener

@assoverteakettle 10 ай бұрын

OMG! He drew each individual tooth in the hand drawn microserrations chart at <a href="#" class="seekto" data-time="90">01:30</a>! Now that's obsessive love of one's hobby. 😀

@NeevesKnives 10 ай бұрын

👊

@joelb1299 10 ай бұрын

Wouldn't use one, but this looks better than a lot of the other roller systems.

@diskobean 10 ай бұрын

Agreed 💯% 👍

@Krazyabe 10 ай бұрын

The clip of a grandma when you said even grandmas can use it was a nice touch👌

@NeevesKnives 10 ай бұрын

thank you

@npenick66 10 ай бұрын

Looks to be good for the quick kitchen touch ups. I'll stick with my kme for my carry blades but the wife may end up with one of these.

@Teleken1968 10 ай бұрын

Your timing is perfect! I’ve been shopping for sharpeners. :)

@Nailed101 10 ай бұрын

Thanks man. It helps me to understand what not to buy for my knife sharpening system. Very helpful video.

@NeevesKnives 10 ай бұрын

noproblem

@guysolis5843 8 ай бұрын

I used my Norton Multi Stones when I had a restaurant and I've been working with it again and I mastered getting a great 20 degree edge finally. Stones takes practice and patience in order to master them. I hone straight razors which are much different and after each honing I do a test shave before sending them out...Not sure if I would purchase one of the Work Sharp systems, maybe if the price were right. I do like the portability and the fact you get 3 easily replaceable stones but that sucker is SHARP..I'm ordering one! Thanks for a most competent review and instructional!

@mikereese15 10 ай бұрын

I remember the other roller. This is a very cool system. Nice and easy. Gotta check it out. Thanks for the full sharpening

@russellfrancis813 9 ай бұрын

Depending on the option you can get a really excellent set of sharpening stones with a sink bridge for about the same or even less money. A good set of stones, although maybe not for everyone, will be able to sharpen every single knife without fail, and won't need any additional "hacks" to make it work with certain knives. I highly recommend it if you're passionate about your knives and you have reasonably steady hands. Start with a cheaper knife to practice, and once you get the hang of it you'll be sharpening your chefs knives in no time.

@bobbymoss6160 8 ай бұрын

This system works well for everyone because it requires zero skills. The system you're talking about requires high skill level.

@Utrilus 7 ай бұрын

A 10 bucks diamond stone and a strap with a compound is all someone really needs. Oh and some way to make sure they hit a consistent angle. Like a thumb at the back of the blade with a sharpie mark where the knife meets the thumb to keep it consistent.

@satan101101 10 ай бұрын

I would say it’s similar but a little bit better than the original 1:it have 4 angles to choose instead of 2 2:you can change the sharpening disc for a different grit But the downside is still there! It still miss the tip of some knifes and it can’t sharpen tall knife like a cleaver without stacking up the drum .

@NeevesKnives 10 ай бұрын

i personally just focus on the tip by itself then blend it but yeah every system has draw backs

@danofiremano 8 ай бұрын

Looks like a pretty good system for the kitchen, but for my folders & outdoor fixed blades I'll stick with my Lansky & my Wicked Edge. Thanks for the video!

@hovan2yourjunk 10 ай бұрын

1/2 way through the video and went to Amazon to check it out and I’m shocked by the price! I thought it’d be like 80 bucks. Been outta the loop for a bit so this is the first time I’ve seen these rolling sharpeners. Thought it’d be cool to grab for the kitchen. I’ll stick with my bench stones for now

@ApeRSV4 10 ай бұрын

And they ripped it off! Neeves is chump for promoting this thievery.

@hovan2yourjunk 10 ай бұрын

@@ApeRSV4 He can promote whatever the F he wants! Chumps sit behind a keyboard and talk $h!+. Go away…

@DinoNucci 10 ай бұрын

How much is it??

@endless3cho 10 ай бұрын

Did they claim it was their own design? 😒

@chenzitong1 10 ай бұрын

150 is expencive?! Not when the average knife in my collection is $400AUD.

@BO-kh1iz Ай бұрын

I think a better comparison (price and functionality) is the regular Horl 2 ($189), not the Horl 2 Pro ($429). The Pro is probably a bit over the top, but the fast rotating planetary gear is kind of cool. I think you have presented the advantages and disadvantages of these rolling sharpening concepts very well.

@oorcinus 10 ай бұрын

“Work sharp has put a spin on it” - I see what you did there.

@AnomadAlaska 10 ай бұрын

That is a sharp knife! I love guided systems and learned of the old designs as a kid in the 70's. Hard to pick a favorite...

@2012Viking 10 ай бұрын

I have the Ken Onion Work Sharp system and love it. I thought this might be good for just a quick touch up... until I saw the price! It costs more than the electric ken Onion system? Wow, I'll pass. But thanks for the video, great job.

@NeevesKnives 10 ай бұрын

If you want a great little system for touch up and maintenance check out the work sharp field sharpener it's amazing and only like 30$

@briankgarland 10 ай бұрын

Glad I found the price in the comments before I wasted any more time watching this.

@theMeshtar 10 ай бұрын

Yasssss, I was waiting on your review! Thanks for being so quick about it 😊

@theanvil8009 9 ай бұрын

I have a Lansky system and like it but I usually wait until I have several knives to sharpen because it takes a couple of minutes to set up and get the knife in the clamp. By the the time I got one knife set up ready to start sharpening I would have it sharpened with this simple system. I'd probably still only use my Lansky system on my best knives but for the kitchen knives that need sharpening fairly often (my sister has some inexpensive kitchen knives) this would be great, could even throw it in the same drawer with them. Great video!

@Zero_8347 10 ай бұрын

I like how the stones wear more evenly than traditional stones

@richardcasner7665 10 ай бұрын

Awesome little set up. Do you think that you could elevate the roller by putting it on a cutting block, so that you could clear handles and plunges? My thought is that it would be the bottom side of the circle giving you more room before it hits a handle or plunge.

@benjaminbrown1179 10 ай бұрын

Yup

@bigl6322 9 ай бұрын

Exactly my thoughts

@osomxl 10 ай бұрын

Quick solution for kitchen knives where you end up hitting the handle before getting all the way to the heel is to use a board or book to raise the sharpener. This will actually give you a better angle of attack as the wheel will contact the blade at a more perpendicular angle.

@cadthunkin 10 ай бұрын

exactly my thought, solves several things.

@bobsmith2944 10 ай бұрын

Good vid bro. I like the general tips you threw in during review.

@mrwonkwonk 10 ай бұрын

Here we go again with Work Sharp breaking the internet. 😂

@Baldyjock4846 10 ай бұрын

I finally understand sharpening thanks to you. Sounds stupid but perfection is hard to achieve if you dont know how.

@diskobean 10 ай бұрын

Well said. And I agree, super informative video about sharpening in general, not just about this specific rolling system 🙏✌️👍

@barbarianbraunny 9 ай бұрын

Agreed he does such a good job displaying how to

@Baldyjock4846 9 ай бұрын

Recently learned from my head chef an easy to remove burrs is to use the steel counter tops. Works a treat.

@barbarianbraunny 9 ай бұрын

@@Baldyjock4846 really!? I gotta see that

@James-ke5sx 10 ай бұрын

Cool idea. I use the Block sharpener that I carry on a string around my neck for about 40 years or more. A little sharpening device no one's ever heard of.

@StitchJones 10 ай бұрын

This is a great video and you gave great information on this system. I really do wan to get this, but the price is keeping me away for the moment. Still, it's a killer system.

@NeevesKnives 10 ай бұрын

Yeah it's definitely prices on the higher side, I do wish it was around 110 to 120. However your paying to not have to learn the skill, the ease of use. With any system there's a learning curve this has the easiest one by far

@mickeydavis4204 6 ай бұрын

I have a Hone rolling sharpener...I love it...has 15 & 20 degree angle...you can change the angles using shims under the knife block ...playing cards or thin silicone mats cut to fit ( Amazon) I don't care witch rolling knife sharpener you have...they will make micro bevels with all the angles...I have checked my holding block...perfect 15 & 20 degree angles....if you put a flat piece of steel on them it will sharpen to 15 or 20 degrees perfectly...Knives are wedges from the spine to the apex...put a knife on 20 degrees & it will sharpen somewhere between 18 & 15 degrees depending on the width of the spine...my Klein angle finder verifies this. Have you tested to see what your real finished angle is? What would be the best way to get your desired angle?

@rajibalam9748 9 ай бұрын

Hi, Neeve. Awesome channel; indispensable content. Cheers.

@BareArms8 10 ай бұрын

Think I’ll get that. Thanks Jerad

@SEPTEMBERMAN 2 ай бұрын

yet another knife sharpening tumbler!!!!!!! awe

@NeevesKnives 2 ай бұрын

Tumbler is not who started it, Horl is

@tormentedslayer7498 10 ай бұрын

Nice!! I'm gonna have to buy this!!

@shawnlavigne9069 10 ай бұрын

I thought I'd seen it all. Interesting.

@Rood67 10 ай бұрын

Looking at the WS site; I like that they are set for 15, 17, 20, and 25 degrees where others are usually only two angles.

@mrcheesefood1 10 ай бұрын

Can't wait to see what other designs they steal next!

@MarkThomasBuilder 10 ай бұрын

Yes, definitely strop at the end of sharpening. This is an interesting sharpener.

@Rockyman86 10 ай бұрын

Love me some work sharp!

@diskobean 10 ай бұрын

Same 🙏

@GrimLocke161 10 ай бұрын

This is the first sharpening system that doesn’t scare me, so I look forward to getting it eventually. Also, since I’m not that plugged into the “knife world,” I didn’t even know rolling sharpeners were a thing until WS published their first vid comparing them. Before that, I was thinking I’d eventually get a coarse/fine DMT stone when stropping finally does me no good with the Kizer Swagg’s Swag Back, never mind reprofiling my five year old Good Cook chef’s knife. But this seems a like a way to get a good edge with as much control and patience as possible.

@kacperkaps8591 4 ай бұрын

at <a href="#" class="seekto" data-time="193">3:13</a> I was waiting for '..body once told me world was gonna roll me'

@eribne 3 ай бұрын

Your review is great. But sadly, no seller ships WORK SHARP products to my country.

@otterconnor942 10 ай бұрын

This is awesome for kitchen knives

@rob3040 7 ай бұрын

It feels like, perhaps, the Horl system MIGHT be better with the very important exception that this one has an option for a 17 degree edge. I have a Nakiri that is pretty specific in its demand for 17 degrees…so I am a fan of this. I wonder if they also might come out with more grit options if it sells well

@philkight2630 10 ай бұрын

And here I thought the 5 sharpeners I have were enough

@raybo34 9 ай бұрын

Nice demonstration and tutorial.

@SurfMonkeyCoconut 10 ай бұрын

I like the imagery of the well dressed, upper class, silver haired man washing veggies when you were saying “you don’t need to have any skill level…” hahahaha 😂

@elizabeththompson4424 10 ай бұрын

maybe... when it hits retailers but I've been doing well freehand sharpening or my system with the guide rods & clamp which I rarely use have yet to try a Work Sharp product

@nadergt1 9 ай бұрын

Work shop or HORL , which you think is better ?

@theredbar-cross8515 7 ай бұрын

I wish they had something lower than 15 degrees. Higher end Japanese knives sharpen to 12 degrees often, and the steel is hard enough to retain that edge without rolling.

@paulschulte3847 9 ай бұрын

Ever heard of “Horl”?

@spiritsofthedistilledkind3633 10 ай бұрын

Price is higher than I was expecting coming from work sharp, but may be worth it cause it takes considerably longer using their precision adjust sharpener on kitchen knives

@bgideon27 2 ай бұрын

Thanks for this review.

@hificat101 10 ай бұрын

Nice review. Sad to see you cutting up the new Smoky Mountain Knife Works catalog, but at least it was a Benchmade page. 😂😂😂

@bg76843 9 ай бұрын

I dig the concept but won't be paying the $150 price tag for it

@dannytheginus7899 10 ай бұрын

Anyone arguing that its tge same design must have nevere seen any other knife sharpening system, literally hundreds of similar designs. Production of useful products use precious ideas and new ones, thats what happens everywhere no matter who is making them

@Ryan-re1rs 10 ай бұрын

I like it. The horl was way way too much. I was looking into the tumbler, but wasn't sure about thier quality and service. So this might be right up my ally.

@NeevesKnives 10 ай бұрын

Yeah I did a video comparing the horl and tumbler, the tumbler is lower quality in many ways

@tomcat8983 3 ай бұрын

I always use my Lansky rod guided sharpener, but I'm always open for a better way to sharpen.

@Pete_Fish 10 ай бұрын

Thanks Jared 😎

@BinaryClay 9 ай бұрын

It might be a more fair comparison to compare it with the Horl2 and not the Horl2 Pro. How do you think they compare?

@chrisk7984 10 ай бұрын

"Put a little spin on it" haha funny

@dustinheinze8484 10 ай бұрын

In your review would of been awesome to see a before and after of a dull to sharp knife

@born2beashooterjosh397 2 ай бұрын

For someone whos horrible at sharpening cnt even get an edge with a pill through and cnt get it cutting hair sharp or even close off diamond plates i think i jus cnt hold a consistent angle, would you suggest someone like me buy one of these rolling shstems or would i be better served to buy the worksharp field sharpener u showed and some angle jigs like the lil pyramids or wedges?? Im wondering if j might be better served with the rolling solution so im keeping a consistent angle and can get my new livewire stupid sharp this will be my first premium knife and first time stepping out of the $20 knife n $5 sharpener set up cnt take the non cutting edges i always get with those things n ddnt do much better with two diamond plates i have but i also dnt have any kind of angle guide so im sure thats why im having terrible results i dnt think id be able to master any sustem but the rolling kind honestly i jus wish it came with a super fine stone to get things maximum sharpness buy i wouldnt know as im not mechanically inclined lol any guidance would be greatly appreciated and think budget friendly bc im poor and cnt afford some high dollar sustem but i could swing for one of the rolling sharpening kits off amazon for like $40 ill byy one next month when i get paid ill buy one and then i guess jus keep trying to practice with the cheapo junk sharpeners i have currently which seems like a waste of time but gotta start somewhere try to at least thanks for the video u have me leaning towards one of these systems just depends on if the budgeted options are decently close enough to the name brand if it just looks like junk its back to the drawing board bc i cnt afford this work hard one specifically way too poor hell prior to today i have never paid more than $50 for a knife let alone a sharpener

@NedKnives 10 ай бұрын

Was curious what your opinion of this sharpening system is! Cool video, thanks!

@jacobcombs2269 10 ай бұрын

Thing about metal is, with some skill and know how, you can fix your fuckups. I have a lot that Ill get once I get the patience and the correct tools/supplies. I need a new knife sharpener. Thinking about getting one of these but Id really like a fixed angle sharpener. Good review bro.

@anstef1485 7 ай бұрын

Very interesting system if the price was half of what they sell this for...

@DMCOGBURN 6 ай бұрын

If you have a good set of kitchen knives like Wusthof which are already sharp and you just need to fine tune them, do you have to go through all 3 blades or can you maybe use only the ceramic to keep the knives extremely sharp quickly?

@Somerandomguy2998 9 ай бұрын

I can't believe that Worksharp copied Horl

@nitrorc4life1 10 ай бұрын

How dull/damaged was edge before sharpening? Thank you for video.

@DMCOGBURN 6 ай бұрын

This comment is similar to my last comment. We have the Wusthof sharp knives and we use a honing rod after each use to keep it sharp as new. However, making sure you sharpen at an exact 15 degree angle is not nearly as acccurate honing as it is with your 15 degree magnet angle. If we use the 15 degree roller after say 2 uses, will that be sufficient enough to keep it sharp as new or should we start with the 600 and then use the ceramic. I'm thinking along the lines of keeping the knives sharp at all times vs letting them degrade to needing to use the 320 or 600. Thx.

@NeevesKnives 6 ай бұрын

With this system after you have set the bevel to your preferred angle on your chef knife then you can quickly and easy put a new edge or just touch up in min or seconds,

@TekedixXx 10 ай бұрын

I have always been impressed by the rolling knife sharpeners, but I just don't see this being a better deal than the Ken Onion Worksharp (Which I think is either the same price, or cheaper?) Or just getting some mediocre whetstones. At half the price I could see myself buying it, but I get there's a lot of engineering that went into the design, and that isn't free.

@NeevesKnives 10 ай бұрын

the work sharp belt sharpener is great for fixed blades etc but its a convexed edge the roller will give you a better quality edge on certain knives but both are good

@sdssoon 9 ай бұрын

I'm thinking of getting one of those rolling sharpeners, but I don't know which one is the best. I was thinking Horl 2 from your other video, but now I'm confusing. Any advice between Horl2 and Work sharp?

@brunobros3341 6 ай бұрын

I have the same question. What was your chose?

@supergrendel 10 ай бұрын

The cool thing with most folders, like my Benchmade, is I can just remove the blade from the handle

@NeevesKnives 10 ай бұрын

It's more about the plunge grind and Riccasso area

@chris_2413 10 ай бұрын

I can see them coming out with a some finer disks if this system takes off

@JamesWilson-lg7bx 8 ай бұрын

Hey Jared, how strong are the magnets on the system? Are they adequate?

@BrandonGuise 9 ай бұрын

That Bald Man shirt though! ;)

@NeevesKnives 9 ай бұрын

yesir

@ecotec4 10 ай бұрын

I received mine yesterday Jared and the 17 and 15 degree magnets came off while removing my vosteed kitchen knife. Work sharp is replacing my block for me for free. Really odd the happened. Noticed very minimal glue holding magnets on

@NeevesKnives 10 ай бұрын

yeah good thing they are replacing ive not had that issue at all but will look out for that thank you

@natehoover5266 10 ай бұрын

Wish they would make a smaller version for pocket knives.

@FRANKKKKYYYY 6 ай бұрын

Hello from the high grounds of Canada! Thanks for your great eview lik always! I already bought the Work Sharp Ken Onion Edition, incredible and fantastic sharpening machine, but my question is could you sharp serrated knifes with this Rolling Sharpener exemple Bread Knifes! Secondo can you buy other grid of disk? Thanks again for your work and keep doing it! Sincerly Frank

@NeevesKnives 6 ай бұрын

I do believe you can buy new stones but I'm not sure about different grits, no it won't do serrations

@cupoftt420 10 ай бұрын

i might get my camilus carni this have their handheld w strop

@OlegLyutov 9 ай бұрын

when hitting a handle on some knives, would it make sense to lift the sharpening roller up by placing on a cutting board so the sharpening will be done by the bottom portion of the roller?

@Chingus696 10 ай бұрын

“Put a spin on it! “ Yeah…. See What I did there?…. (Nick Shabazz voice…) <a href="#" class="seekto" data-time="23">0:23</a>

@richardcroft8046 10 ай бұрын

How about Cold Steel Trail Master 5/16” blade? I’d prefer to sharpen the existing edge, NOT strip away a lot of steel creating a new one. Thoughts?

@wes.killed.it.5511 10 ай бұрын

Hey Jared quick question, in the scenarios where certain folding knives wouldn't work because the handle/scales/bolsters are making contact with the end of the stones, would disassembling the knife and just putting the blade by itself onto the magnet system work out? Would the blade be able to be full sharpened? I totally get that there's still the possibility that the stone is gonna hit the plunge or the ricasso and that the handle/scales aren't gonna be the problem in those situations, but I'm curious if in the situations where it's just the handle making contact, if disassembly would fix that issue. Thanks for the video!

@jawaring4367 10 ай бұрын

yeah you could make a handle for blades like this. something as simple as a thin piece of plastic and a screw that goes through the pivot hole would probably work for most knives. you could make a clamp version to

@jayhanson-hs5vg 10 ай бұрын

i like the 4 angles . do they work with thick survival knives.

@hans-juergentroeh9163 7 ай бұрын

Would like to see how stainless steel sticks to a magnet????

@jimnech5066 10 ай бұрын

Why not put a block under the knife holder so that the wheel is making contact an the lowerr 1/2 or 1/4 of the wheel. That should allow the wheel to reach all the way to the end of the cutting surface?