If there’s one thing I’ve learned running lifts like this, it’s that being smooth is always better than being fast

This guy is good. I’m a forklift operator and have years of experience outside on very uneven terrain. It’s weird when I get the rare opportunity to drive on flat concrete. I find it strange not to have to constantly maneuver around mud holes and huge bumps while loading flatbeds

That was smooth af... He didn't pause one moment. That's some serious skills right there, hat off

0:30 Failed his test by lifting the load while in motion.

Make me smile when I see people do the same hand movements when lifting shifting and tilting, dude really is a good driver 😆

Turning while load is elevated, lifting load while in reverse, and isn't even checking behind him while reversing. Definitely not "skilled"; All of that being said, these are the worst and most dangerous kind of operators to work with.

THIS IS HOW TO DO IT BUT IN A SAFETY COURSE ON HERE THEY SAY "NEVER" RAISE TYOPUR FORKS BEFORE LEVEL WITH THE PALLET. BUT YOU HAVE TO KNOW EXACTLY HOW TO DRIVE YOUR LIFT PROPERLY!!

This is cool and all, but this is really unsafe as hell 😂.

😂😂😂Most the forklift operators in my cold storage warehouse operates the forklift exactly like that 👍🏼👍🏼👍🏼😎😎😎

I do this all day,smooth and easy.Keep up the good work

I've looked at it again with my glasses on and you still didn't look behind 🙃 😕 very naughty forklift driver

Same. It's like it becomes an extension of your body. Normally, the only things that cause problems are surprise variables; i.e. dealing with foot traffic and working behind other folks. But, gimme space and I'll move some shit.

He may be good but at the expense of safety rules.

Pretty fast but how about your safety record, any accidents? I personally have over 18 years experience driving reach trucks, order pickers ,walk-in riders and stand up fork trucks with absolutely no recordable accidents. That is not to say I have had close calls but have never, ever lost a pallet or any materials off of a pallet my forks were in. I am usually called to clean up someone else’s mishaps. I am not perfect by no means just be aware that if anything is on your forks pay attention to what you are doing and always be safe. Speed is not everything if you have a accident . This is my message to all drivers do not get complacent and be aware of your surroundings.

all the occupational safety regulations have been passed up their ass, it is a risk for the operator as well as for his colleagues, very bad example

after 5 years working with linde forklifts such as linde h25 evo, linde e20 and linde r14 and now is using yungerheinrich in new job i can say linde forklifts are much better and easier to control with more precise and smoother acceleration, deceleration because of having three pedals most importantly downward and upward that gave you that option to reposition yourself fast, without drastic breaking or accelerating. Also operating linde forklifts is much better more precise and more comfy, just two sticks that you can easily control with two fingers while your wrist and arm is chilling on armrest. On the other side i dont like yungerheinrich at all, i you have two pedals which is strong brake and acceleration which makes them harder to control and there is a higher chance your pallete will fly off and to go downwards u need to switch button which is located on lifting stick that is actually disquisting, they are also not comfy because som of them doesnt have armrest so your arm lifts in air while u constantly need to move your wrist to switch between three stick. Linde 4ever :D

you arent supposed to speed back as you are raising your load...dudes just lucky his load wasnt a little higher or a little heavier. slow is smooth, smooth is fast.

He's the forklift rodeo champ two years in a row

Walmart watches this and thinks we can all work like this

Whatever is on those pallets must be light as hell, you can't do that when the load is heavy and you have a small forklift like the one in the video 😂😂

Its pretty easy to operate with speed if ur assigned to same forklift everyday... I have 16 yrs experience

Goosebumps. Every time🏴󠁧󠁢󠁥󠁮󠁧󠁿

“This is a workplace, not a race” I’d fire him for being this wreckless on my forklifts

Holy fn sh it!! YOURE A GOD !!!! 🙌🏽🙌🏽🙌🏽🙌🏽🙌🏽🙌🏽🙌🏽🙌🏽🙌🏽🙌🏽🙌🏽🙌🏽🙌🏽🙌🏽🙌🏽

I worked for 15 years in a warehouse all by myself, it is a lot more fun driving when you don't have to worry about morons walking in front of you. we had a beast of a fork, not one of these girly machines with a governor and beeps that don't run without the seat belt on they have now... they kept threatening to buy an electric sit down fork. that would be the worst

He slammed the rack to hard putting it back, had other items shake. I bet his year to date in damages out weight his pay.

Do any of you leaving comments not realize this video has been sped up??, look at his head movements, look at his flashers, listen to his reverse signal..........DUHHHH

My boss would have a stroke if he saw me Operating this fast 🤣

Working like that is all fine and dandy untill u miss the pallet put your fork threw the material or bend that rack when u drop the fuck of that pallet on that rack or pulled entire rack down on pull back ....its cool beans but u gotta be perfect every load every lift and if u ever diven a forklift not every pallet is the same

Shouldn't be driving at pace. One day he will probably break something

He should have stopped and put the hand break before taking or leaving the palette on construction. Everytime he should have checked all area looking around. He failed his exam as fast and dangerous driver!

gains 1 minute due to speed loses 1 hour to picking shit back up :D

Using his horn made me proud through this entire experience ❤ nice work and skill fellow operator of the fork

This guy is a danger to himself and other warehouse operatives

Y'all know the video is sped up right? like people in here saying they drive fork lifts but can identify the super fast beeping a very short execution of the horn... (if on PC, put the video at 0.75 speed and see how it becomes a little more realistic.... he is fast I'll give him that. but the video has been altered.)

Never turn with a load in the air very unsafe

Ahora subelo a 6 alturas y vemos lo rapido que lo hace

Just like driving license, everybody acts up when the authority isnt checking in 😂

I drive very similiar linde lift, that beeping when you are going backwards, i get annoyed even listened to this in the video. Lol they beep way way too loud.

This reminds me of the scene from Schindler’s list for the guy only has a couple hinges done and then it makes one within a minute when the boss shows up!

Osha would love that guy, they eat in steak for months!!

Great skills 👍👌

I checked the speed and thought it was on 1.5 x, but it says normal so i continue watching..

Chur not bad. Decent speed and pretty smooth. But moving a pallet at eye level with a single forks for a minute is nothing to brag about. Keep that speed and skill with a cascade on a production line for 12 hours straight stacking two at a time twice as high.

Pretty good but if osha saw that he’d be fired lol

Yessirrr Being Audacious comes with risks babies

speeded it up a little bit still fast I guess

I’m quick with it but not this quick

Mans ln flat ground. I do that in a parking lot that looks like the grand canyon

You sir work in a lumber yard...

Good

Look at all that room he has, no problem, you could fit in there with a 10k lull to pick those pallets...

That is one of the worst operators I've seen. Anything you are trained not to do he did

This guy not looking behind, he could kill somebody, he is a risky driver

Jesus. That’s not human

It's really easy to do that and also breaking all kinds of safety rules

Any tips for new forklifters to pick up speed and efficiency as I'm a new forky driver

really good, fast and all, but no safety

Didn't check behind him one single time' raising and lowering forks while in motion. He's a rolling OSHA violation

1.Operator and stuff safety.2.Cargo safety.3.Speed under control.Petros from Greece 37 years experiance.

Ya,it’s all fun and games,untill you have two fork holes in the product.

😄 Expect❤

if your doing this job for how many & using this forklift ofcourse you can do it faster BUT if your new & drive a forklift thats new model you can't do it fast just like that just like i work for 11 years in a 1 company. anyone can say they can master that job. ...its just my opinion

No matter what your boss says, don’t operate a forklift fast if you don’t feel comfortable with it. Being slow and careful is a lot better than having expensive or potentially fetal accidents. Nobody can fire you for being slow. If they do, turn around and sue them and have OSHA involved. As long as the job is done, who cares.

BAD,BAD,BAD OPERATOR

I have similar skills with a Raymond reach. Very nice

Pretty easy. Now do that on the fifth level with 4-deep racking.

Where is Tom and Jerry?….ahhhh…they clocked 15 mins ago…so I think they left already

from 3 tons to 25 toner forkift operator for 23 years, this kind of driving skill has a lot of safety issues.

I had done it ,good video 🙂

Film sped up though

That guy should be sacked, thats not skill, thats just plain dumb driving. Yes , I have 3 forklift licenses

SAFETY FIRST

No bad not bad at all🔥🔥🔥🔥🔥

And all for $10 an hour.

Ezt a kamerának megmutatta, de napi 8 órában ilyen nincs! Nem mellesleg szinte biztos, hogy baleset lesz a vége.

Nah I wouldn’t trust him to do anything more than that

Saw 4 OSHA Violations

As a forklift operator, this is probably fake. The reverse signal is way to fast, the sound is usually allot slower

He drives a folklift just like me no mucking around lol 😅😂

Very very fast, but he's good! But... Can he do it with a double-wide?

Well he is using a Drexel 😂

Для работы бессмысленно, для тренировки слишком быстро.

These videos never impress me because what’s the rush? Fck these jobs lol all you’re doing is putting yourself at risk of getting in an accident, it’s silly.

Do you have to be this good to get a job as a forklift driver?

So esperando uma pessoa passar por perto para acontecer um acidente com toda esta velocidade

this guy thinks that by doing it quickly he is already a good operator, with so many lack of security that he is committing the joke is not to do it quickly, it is to do it well and safely as it should be

I wouldn't even try to work that fast.

Looks Fake. Looks like they are just speeding up the video.

Man that ain't nothing. I bet dropped over20 pallets

He moving slow u just edit it n fast forward ⏩ 😂

It should have super-elastic tires because it stains the floor !!! Driving with forks up is forbidden

You mean dangerous.

А ты хорош , но вот сначала нужно было поставить слева коробку, а только потом справа показал мастерство

singapore?

See him wiggle before he turns? It's because his approach is wrong. He could've been faster

Mantap skil operatornya, canggih dan cepat.. Sukses trus kak.👍👍👍🙏

WOW 🥰 now show me ur speed how to lift unstable and uneven materials

This isn’t that great at all, he didn’t even check over his over shoulder once during that, also turning with an elevated load, this is not skill it’s just dangerous

Na wózkach bocznych można osiągnąć lepsze rezultaty!