Explanation of Feeder Tap rules and concepts found in 240.21(B).
Пікірлер: 68
@kahlil47453 күн бұрын
Just stumbled across your channel again.. You're a great teacher. Clear. Now that I have my license this is going to be a real resource
@lukesnyder32932 ай бұрын
i was so clueless on picturing what was going on here as i was studying, this made it so clear thank you!
@davidnuno41109 ай бұрын
Dave you are a very gifted teacher. Thank you for this information
@bigm1247 Жыл бұрын
For the very first time I’m actually interested in learning about Electricity - A big thank you Dave. Truly appreciate your time and effort making these videos.
@charlieperez68448 ай бұрын
Look up the IBEW in your area. Great opportunity
@ahmedfadul6767 Жыл бұрын
Another difficult and confusing nec section made easy by Dave .. thanks alot!!!
@abrahamjaime9417 Жыл бұрын
Dave make these concepts look like a 2+2,man. Im studying for my 02 and this guy is making it easier for me.
@slurryz Жыл бұрын
I pay $1200 a year for tuition as part of my apprenticeship program and your videos are light-years better than anything my program provides
@JesusCruz-wt2zp Жыл бұрын
Thanks for your videos.. please do more, you are a great teacher..
@mattdelgado756 ай бұрын
Wow this is what I’m here for!! A thorough and clear description that even a dunce like me can understand. You’re a life saver I wish my teachers could have explained it like this!! But glad I found your channel CHEERS!!
@Yelknib66 Жыл бұрын
You do a very good job explaining and teaching these codes. Thank you.
@braedengendron6981 Жыл бұрын
I've been studying quite a bit of the NEC in class lately, and tap rules have been my biggest struggle so far. This video made it all click immediately. Thank you Dave!
@charlieperez68448 ай бұрын
Too the words right out my mouth, bro.
@TheMoody20066 ай бұрын
Excellent explanation of tap conductor rules. You are a gifted teacher. Thank you for sharing your knowledge.
@RustyJeepHole Жыл бұрын
I really appreciate your ability to explain in a way that is easy to follow along with. Great instructor. Thank you
@B1G_SW0LT11 ай бұрын
Now this is a great video. Thank you for breaking it down so well.
@simplyexplainedtv6946 Жыл бұрын
Very well explained Dave and the solution for the 15A protection by upsizing the cable to meet the minimum requirement of the code.
@icevariable960011 ай бұрын
Brilliant. This really explains something that I had zero understanding of. I wish you went on tour to preach continuing education classes. I'd sign up for everything you had.
@taba92212 жыл бұрын
Thank you for your explanation on 10 and 25 feed rules
@Money-yj4wg7 ай бұрын
Your a amazing teacher. Thank you!
@JJ-ix3smАй бұрын
Superb excellent explaining teaching
@VicVal2 жыл бұрын
Dave, thank you! Very informative! I would love to see the concept of this video expanded into city-grids, i.e. in my home town, 400V/300A feeds from the Minor Distribution substations into the neighborhood grid, from which our houses are connected. I never really understoood the full protection scheme in this, with the minor distribution transformers split over multiple 10kV feeders from the Distribution substations.
@jsfields00 Жыл бұрын
Utility has its own code not governed by the NEC. not to mention those are free air conductors capable of withstanding much more amps
@sungkim162 жыл бұрын
Your videos have been so critical to my classes
@electricalsolutions43644 ай бұрын
I also teach electrician CE classes, and I have to tell you that you nailed this video. This video (Feeder Taps) would also tie-in nicely to 2020 NEC Article 705.11(C1).
@davidjackson41122 жыл бұрын
Thanks Dave, great theory and explanation. Easy to understand the 240.
@AB-mx9lx9 ай бұрын
Thanks very much for all this great work and explanation!!
@dmh8329 Жыл бұрын
After several videos finally! Excellent explanation1. Following.
@ce2flaco Жыл бұрын
This was very well done. I had to brush up on this as I ran into it on a project. Your video was a great addition to the code book.
@Calico5string1962 Жыл бұрын
Always excellent info! I utilize the tap rules whenever I can. Often, it simplifies the wiring. However, it always amazes me how many electricians really don't use them (even when they can), perhaps because they don't fully understand the concepts. Thanks for sharing!
@icevariable960011 ай бұрын
Can you give a couple examples when you'd use a tap? I believe I understand the logic here, but I need to see practical application of it in order for it to sink in and be retained.
@frankrose46579 ай бұрын
Thank you so much your videos have made it possible to learn and get ready for the test 💯💪🏻💪🏻
@caseydukes3214 Жыл бұрын
Thank you Dave awesome video you make it very clear and easy to understand !!
@urielmedina2470 Жыл бұрын
This video helped a ton. Thanks for the content keep doing what you’re doing I know I highly appreciate it. Thank you
@ForwardGuidance Жыл бұрын
I'm a big fan of Dave's. Comment please, say anything so this channel can grow and like all the videos you watch. These videos are so out of this world great!!!
@Al200443 ай бұрын
Thank you Dave for doing an amazing explanation on feeder taps!
@chrisneill6239 Жыл бұрын
Thank you so much! This is a very helpful video, much appreciated
@elc2k385 Жыл бұрын
These lessons are so fun.
@michaelm4865 Жыл бұрын
Great tap lesson sir!
@robertrocheville77692 жыл бұрын
Am I the only one who watches these videos hoping it will make me a better mechanic?
@joes.83512 жыл бұрын
You’re not alone. I’m a senior printer that has a basic understanding of electrical, HVAC, PLC’s, etc. Seeing if I can improve my skills and make more $.
@mph59862 жыл бұрын
U r not a lone. I am a big fan of Dave.
@rrengelhardt Жыл бұрын
Great explanations, thanks
@russellperkins833411 ай бұрын
Great instruction..thanks
@jonathanstanford843 Жыл бұрын
Amazing video!
@jbsierra9109 Жыл бұрын
Excelente 🎉
@rachelcarantes56582 ай бұрын
THANK YOU
@jimpossidente5004 Жыл бұрын
Solid gold
@jimragan94326 ай бұрын
thank you
@MakitafanАй бұрын
Great explanation. One question. If the overload protection comes after the tap does is always need to be a fuse? I would think not...
@StevePellecchia9 ай бұрын
Dave, I'm still having trouble with this. For example, Solar installation's are tapping the feeders between the meter & the main breaker. Applying the 10 ft. rule what is protecting the wires that are connected to the feeders ? Even though they are in a conduit which is attached to the solar disconnect, they are non-fused.
@justd3123 Жыл бұрын
you r the best
@gopherfan102 жыл бұрын
240.4(D), or the "Small conductor rule" does not dictate the ampacity of a conductor nor does it apply to feeder taps. If you are using the 75 degree column, the ampacity of the #10 should be 35 amps and the #14 should be 20 amps.
@controls_engineer_7180 Жыл бұрын
You're the best
@ubaldoperez1539 Жыл бұрын
Excelent
@MrKen59 Жыл бұрын
So, are we talking about sub-panels here? If you drop a 6/3 90-c NM cable 35-feet away and the sub panel provides overload protection to the branch circuit, is the 50-amp breaker in your diagram the feeder breaker? In this case, it seems you need to provide great care in calculating loads .
@ref47514 күн бұрын
is there a tap on motor circuit example
@chrisrivas664528 күн бұрын
I’m needing to upgrade a 100A sub panel to a 200A. It’s a 200A service, would this rule be applicable to use if i tap from the main panel into a 200A disconnect?
@ericpolk90047 ай бұрын
is the 100amp overcurrent because of the 1/3 rule? 100 is 1/3 of 300
@mariagonzalez4362 жыл бұрын
Dave can you do a video on combination DC circuits? The more I study them the more confused I am.
@davegordon68192 жыл бұрын
Thanks for your request Maria. I intend to make some videos starting at the beginning of electrical theory with "What is Electricity?" and on to DC Series, Parallel, and Combination fairly soon - hopefully within the next couple months.
@mariagonzalez4362 жыл бұрын
@@davegordon6819 sounds great! Looking forward to it!
@stevebrule6172 Жыл бұрын
I have a tricky multiple choice question, hopefully someone can with more knowledge can help me out A White/grey wire in a feeder circuit ________: A)Be bonded or have a circuit breaker B)Is the largest wire in that circuit C)Should not have a voltage to ground My notes: On the main panel, neutral is connected to the bar that is BONDED with the panel, the green grounding wire is also connected to the same bar. (so does that mean the answer is A?) In the sub panel, the neutral wire is connected to the neutral bar which is ISOLATED from the metal box with plastic between them, the Green grounding wire is separated and is connected to its own bar that is bonded to the sub panel box. In the circuit that this question applies to, --------- “The neutral wire is going to be sized larger than the Green grounding wire” (But that doesn’t mean it’s the LARGEST in the circuit right? Because the two hot wire could be the same size) --------"The neutral should have no potential difference(voltage) to the ground" (does that mean the answer is C?)
@carultch3 ай бұрын
The answer is C. A grounded conductor (usually the neutral) should not have any voltage to ground, and is marked white or gray. The neutral might be the same size as the grounding conductor (when it carries negligible amps), or it might be the same size as the ungrounded wires (which is common). It might also be larger than the phase conductors, in applications with harmonic-intensive loads. But we don't have enough information to determine which one of these it is, so you can't conclude that it is the largest wire in the circuit. It ultimately is connected to ground at the service panel, but that's out of the picture of the location in question.
@jsfields00 Жыл бұрын
What about taps of unlimited length? Code is hard to understand
@carultch3 ай бұрын
Taps of unlimited length are outside, and are not going to burn down any buildings in the event of an overload. That's why they don't have any length constraints, unlike the 10 ft and 25 ft tap rules.
@oscar27ization Жыл бұрын
Dave is 10x better than holtz, and he’s not charging
@charlesandersen6294 Жыл бұрын
Dave, I have a drawing of a three Phase Wye 208/120 secondary circuit...I need help, do you have an email address that I could send it to you. I enjoy your KZfaq classes, However I have no experience with three Phase. Your Three Phase classes has not addressed my problem.