How much different is the X2 Head and Cabinet from the Combo Version? Is it worth building a new cabinet for the combo to accommodate a 12" speaker?
Пікірлер: 10
@giulioluzzardi76323 ай бұрын
Keep the combo, it will be great for recording and won't do your back in. I stuck 2 strips of 1x2 " wooden strips to the base of the Champ combo to protect the base and to help transmit bass through any wooden flooring( likecon some British made cabs). The new speaker is essential, a low wattage Alnico will make it sound closer to a Princeton rev. Swap the 12ax7vfor a 12at7 as it makes you turn up the master volume making the 6V6s work a bit harder and the sound becomes much more warm and the valve sound is much more prononounced. Small combos are very sought after at the moment that's why every brand has a "new" 5/10/15 watt amp design available and most if the expensive ones are very similar to this Champ in layout ( 2x6v6s ax7s ) but include much better speakers ( alnico 10" or Eminence GA-10 sc64) which makes the difference between a practice amp or a general purpose combo, for what they cost you would nut's not to have one( even for a spare).
@olddogguitars233 ай бұрын
I’ve got another combo that as a special run with burgundy tolex and a celestion greenback. It’s my go to. I’ve got a wooded storage crate I set it on but I like your idea as well. Makes a world of difference getting the speaker up off the floor.
@WoahBoomshakalaka5 ай бұрын
Try playing both amps in stereo. Upgrade the 12 inch speaker to a greenback variant... I would keep the combo and sell the head, you can connect the combo to any 8 ohm cab. Cheers
@olddogguitars235 ай бұрын
I’ve got an open back cabinet with a 12” greenback. Not sure why but I’ve never thought to try and run the combo through it.
@WoahBoomshakalaka5 ай бұрын
@@olddogguitars23Try it and post the comparison!
@spiderman08635 ай бұрын
Guitar lesson. Think about it.
@JimProctor473 ай бұрын
rawcabs Super Champ XD 1X12 empty pine combo cabinet
@olddogguitars233 ай бұрын
That’s pretty much exactly what I’ve got in mind but since I’ve got access to the tooling, I’ll likely do it myself. Should be a fun project.
@giulioluzzardi76323 ай бұрын
When you build the cab video it so we can get some ideas, thanks.
@olddogguitars233 ай бұрын
@@giulioluzzardi7632 that’s the plan. I may start finally in the next week or two.