Watched this vid over a year ago when bought my first 1/5th scale car and must say this is best break-in vid you can find on the web. Have 3 1/5th scale now and always using this way of break-in and all my engines running great for a long time. just give your car the tlc it needs and have alot of fun :) Thx for the great vid guys both thumbs up

6 years later and still one of the best tuning help vids out there! Especially for guys new to the BRAP scene Ssson!!

That was a really helpful video, thank you for your time and effort putting this together!

These guys are great. I just ordered a 6329 and have asked so many questions and they respond quickly and genuinely every time

Alright KZfaq, you can delete all the other videos now, finally found one that makes sense! Appreciate the help!

So much useful information in this one single video! Dan - you are the man! Thank you to you, Sean, and OBR!

Had to find obr tuning vid again. Very glad its still available. Very good tuning info. Thank you very much obr.

I'm watching this in 2019. Excellent video, simillar to the old nitro break ins in some respects. About to get my first 1/5 scale and this video answered every question I have. Thank you Sean!

One of the best intuitive tutorial. Thanks for lending us your knowledge and keep posting them edutainment videos.

Thanks a lot dude, my car arrived yesterday, hope to run it in this weekend. Your video will really help, highly appreciated!

Bloody good video buddy... I bought a 5th scale truck and was new to the carb tuning.. I have the 668 carby and this video really helped me to get the basic knowledge of how to perfectly tune the engine for great overall performance & the break in routine... Cheers !

Followed the steps in this video, got the Reed Case motor to start on the first pull! Great video, thanks Dan.

Great video 5 years ago when I got my first 1/5 scale buggy, still excellent tips today...

Awesome video I will be watching this over and over until this stuff is instilled into my head thanks for taking the time to do this

Thanks for this best tuning video I can find by a long mile 👍

Great video guide chaps. Just got a 30.5 prostock that I'm going to break in at the weekend. Following your instruction will help a lot & make sure my engine lasts & performs like it should!

This is by far the best video of 5th scale carb tuning

Thanks for the great advice, I’m just getting an Fg marder up and running so your video was very helpful, Stay safe and many thanks from the North East of England 🇬🇧

This video is still excellent and informative and hugely relevant today! Thank you!

Talked to Dan on the phone today, purchased an engine, carb and pipe. Super friendly and willing to help.

I would say this is the best video on youtube on tuning and break in. I've watching this video multiple times while breaking in my redcat mt and xb and learn something new each time. I just recently bought a zenoah g320rc motor and I'm currently breaking it in. The stock hy32cc motors on both my redcats are trash. Killed both of them shortly after break in. Maybe 3 hours of operating time on each and they both lost compression and stopped cranking. ...i'm hoping for better success with the zenoah motors because now I'm about $2000 into this hobby between vehicles, tools, and motors. I'm addicted though so....oh well. Thanks again for the awesome video. Once I learn a little more about OBR motors I hope to upgrade soon. Thumbs up!

Am feeling those OBR sunglasses, great video, lots of info on carbs.

Great information! Everything explained and demonstrated in one video. Thanks!

wow that baja is really fast . great video this will help a lot of people , its been liked and added to my channel list .

Awesome video Dan ....I am a newbie to the baja buggy platforms and in a near future I will be buy you guys a nice motor for my Baja. Awesome information for the Baja buggy, especialy for all of us out there that a are in the Hobie 5th Scale gas for the first time like my self . Cool videos

You are a life saver. I just brought my first RC and it wouldn't idle for anything. Followed your instructions and I can finally begin the break in process.

The best breaking in video! You guys are awesome!

Just got my 34cc reed from them and that sumbitch started just like he said it would. It's nice to have ppl like this to lean on when your fairly new to 5th scale. Years in the smaller nitro but 5th scale is a whole different monster. So thank you OBR for what will be an awesome engine

Awesome helpful vid. Watched it twice. Helped me tune my Baja. Almost there.

Excellent video .Most informative I have seen .

Great video! Keep up the good work👍

This just gave me a lot of confidence ! thanks for posting

Very great and helpful information, this video gave a lot of perspective on everything. I appreciate this! 💯

Thank you so much for the details! Excellent advice!

Great video man...new to 1/5 scale and I learned alot!

Great explanation is have to find for this kind of engines tuning, Great video guys....

u gave the best imfov on tuneing a carb ive seen thanks

I just recieved my 34cc OBR Engine & cannot wait to brake this sucker in today. Best Costumer Service! By Far, best Craftsmanship I have ever seen. These guys mean business! I will defentely be buying more products of OBR. Thank you so much Sean and Dan for all your help and Support! hello from Calgary Alberta, Canada! Luv u guys!!!!

Great Video Guys... will clear alot of things up for many people including myself

Very helpful clips. Thank you.

Great video, very easy to understand.

Great video, thanks guys.

I can start my OBR Reed so easily after watching this video thank you

dude awesome information. man. thanks alot. I just got a rovan Baja. and all that information helped out a big way.

Man I wish I’d have watched this video one day earlier. Ya know, right before I flooded the car and broke my pull starter IN THE FIRST 10 MINUTES IF OWNING IT!!! Great video. Thank you. I’ll use these techniques when the new pull start comes in.

Thanks dude this video helped so much 😎🙏🏻😁

Extremely helpful. Thank you

Excellent video!

This is the most in depth tutorial on how to tune a 1/5 scale RC engine that exists.

Awesome video. Thank-you.

This video is exactly what I have been looking for. Yeah, I pull and pull and pull and it never starts. Now I know! I have a fueli 30 cc gas engine and they recommend an 8 hour break in. 4 hours 20:1 & 4 hours 30:1. Seems like a long time. I saw in your video probably about half hour break in . Thanks again Sean.

the best break in video on KZfaq

Awesome Video !! Thanks

Yes Sir. It helped a lot. It also confirmed to me that I got it right my first time.

perfect video Dan.i break in all my engines by instruction from you video. and works great. thx.

The video I needed, thank you for that, I’ll use this zen 34 & my next engine I’ll order a reed OBR 👍🏻

Well done Dan great help 👍

Thanks dan and sean very informative video ....

Thank you for the helpful video!!!

I still have the engine i bought from you guys 3 years old now and still running i dont race it just a weekend toy but man and it still runs like beast escape from cage!

Amazing video thankyou for saving me from many mistakes

thanks for the vid !

Thank you for this. It's clear and straight to the fuckin' point. Other people's vids are dark, you can't see shit and the angles are off. Thank you for helping me understand in English.

Your video help me out a lot, I start from the beginning to get the engine started. I was having difficulty to get it start. I messing with the low needle screw.

This is a fantastic video very informative, I was making the same mistake by leaning the mixture and ended up siezing 2 of my engines. My hobby shop bloke always said to lean the engine to run it fast. I believe he was wrong. Thanks mate, great job....

Thanks for the great tutorial

thank you very informative and helpful

Man, thank you, iv'e learned a lot from your video, thanks for posting it.

Great video! Thanks 😉

Great video. Thank you

Thanks Dan 👍😎👍

Great vid!

Thanks for the knowledge n what not! from OBR website; This video covers everything you need to know about break-in and tuning your new OBR engine. The Wt-1107 and Wt-1242 were not out when this video was made. Starting settings for a Wt-1107 are 1 1/4 low and 1 3/4 high and Wt-1242 1 turn out on the low and 1 1/2 high.

Thank you Sir. This video was VERY helpful. I just wish I had seen this before listening to some of the boneheads in the garage. Most of those guys couldn't pour water out of a bucket if the directions were on the bottom, let alone tune an R/C car. This video will help ALL of us...Thanks!!

Thanks, Dan.

Mantaser says thanks for your tuneing ❤

glad i saw this video, some the stuff i was doing.but didn't know the ys. good job on the vid . you come long ways.thanks for the tips and crab specs.good stuff put in favs.

really nice video

Thx for the info and time

thank you for tutorial and tips ;)

thanks bro!

Best video on this toppic!

thank you, it"s great video

thanks for the info it really helps

thx will try it on my new engine, thumbs up ;-)

Thanks your a big help

Good stuff!

thanks guys, good info

omg thank you so much guys lol this is the best tuning video i have seen so far , i just wish i could have seen what colour the spark plug is suppose to be

Very Nice !! Kind regards from Germany

yep. if they don't have what your looking for, shoot them an email. they're great guys to deal with!

great vid

Thank mate you help me out running my expensive hobby awesome brus

Great video thx

Very Fine Sean!!!regards

Thank you 🙏

Thank God for youtube videos

great info guys!

great vid. so awesome to see a proper vid on the most questions on carbs, engine break in and tuning. Just one question as said below on the heat cycling, do you run the 3 heat cycles during low throttle, 3 heat cycles at half throttle, 3 cycles at full throttle then start tuning or 15 minutes once at low throttle, 15 minutes once at half throttle, 15 minutes once at full throttle then start tuning. Thanks again for the vid. will really help me out.

Wish I could tune mine like this man I'm haveing a hell of a time