File fitting rings to properly gap. Hope this helps
Рет қаралды 6,166
Күн бұрынCuervo ATV Raptor 700 specialists
951-743-6328 sales@cuervoATV.com
/ cuervoatv
www.ebay.com/usr/cuervoatv Cuervo Racing Raptor 700 specialists
951-743-6328 sales@cuervo-racing.com
m. MrCuervoRacing...
@ScrewbyD00 5 жыл бұрын
This video probably just saved my 734cc build. Thank you @MrCuervoRacing
@labryze2 4 ай бұрын
I have a 10:1 cp with a stock bore. I went over on both top and bottom rings. It was supposed to be .020 top and .025 bottom. Im at .025 top and .026 bottom. Is this too large of a gap for the top ring?
@clintonmattingly 5 жыл бұрын
What type of oil do you like to use during the break in period?
@AllanSmith859 Жыл бұрын
What would you say the maximum ring gap can be on the top and second ring
@spencerwilliams6399 3 жыл бұрын
So what about the 105.5 big bore cylinder does the top ring gap have to be 18-20 thousandths as well? What do you recommend
@notwerudy869 3 жыл бұрын
If i order from you are they going to be filed already?
@sjlopez9065 5 жыл бұрын
What's the blue tool called and where could I get one?
@MrCuervoRacing 5 жыл бұрын
Piston ring squaring tool
@everythingloud4068 5 жыл бұрын
I have a 2019 raptor 700r and once and a while when I put it in reverse it won't engage right away then starts to click and then finally grabs within 2 seconds is this normal this is my first raptor thanks
@MrCuervoRacing 5 жыл бұрын
Slip the clutch a little as you are shifting into reverse, this will help rotate the cogs to drop in.
@everythingloud4068 5 жыл бұрын
@@MrCuervoRacing ok thank you I do most of the time sometimes I forget and it does that. And right off idle sometimes it will cut out when I get on the gas do I need a pipe and power commander to fix that or would that AIS plate I bought make a difference on that?
BalcevMMA_BOXING
Рет қаралды 20 МЛН
Partzilla
Рет қаралды 35 М.
Brian D. Mobley
Рет қаралды 115 М.
Sadika Qanbar
Рет қаралды 4,6 МЛН