Finally PAINT MATCHING the VB WRX!

Рет қаралды 36,457

8 ай бұрын

Aeroflow Dynamics Paint Matched Fender Flares: www.aeroflowdynamics.com/coll...
The new VB WRX has gotten a lot of hate for the cladding around the car, but today we're fixing that with some paint matched fender flares! Out with the old and in with the new! Let me know what you guys think of the new flares that not only give us the paint matched look but are also 10mm wider!
Driven Media Carbon Fiber & Overlays:
► www.driven.media/shop
22+ WRX
►www.driven.media/shop/22-suba...
GR86/BRZ
►www.driven.media/shop/22-toyo...
Discounts
► Use code KEVINVO for 5% off your Aeroflow Dynamics order!
Dress Up Bolts
► Use code KV23 to get 10% off on www.dressupbolts.com
3D Floor Mats
► Use code "KEVIN3D10" to get $10 off on 3dmatsusa.com/?You...
Import Bible
► Use code KV23 to get 10% off on importbible.com/?aff_id=kev
FOLLOW ME:
►Instagram: / thekevinvo
»Music I use: share.epidemicsound.com/7tnnmu

Пікірлер: 147

@chones_ 8 ай бұрын

that not 100% paint match on the white would annoy the shit out of me. from far away it looks ok but i don't think i could do it on white. the wrb look very good.

@artblackwood7936 8 ай бұрын

I got used to the cladding and it didn't bother me, but without it the car looks more expensive.

@KevinVo 8 ай бұрын

It definitely changes it up a bit. I didn't mind the cladding either but I've gotta say I prefer this.

@cr0wmatic 8 ай бұрын

If only there's something we can do about the black on the rear bumper :D

@alexmiranda3198 15 күн бұрын

There is actually, aerodynamics has done it :)

@astrolightsadventures4677 8 ай бұрын

The fact it’s ten mil wider is actually sick

@Accost2u 8 ай бұрын

I don’t mind the bare plastic on the front and sides except for the massive rear bumper. It needs some paint to break it up.

@derekf5495 7 ай бұрын

If they released the current wrx as a smaller run "wilderness" trim people would have loved it. Ultimate off road wrx. In the show room it is right on with the rest of subarus current design language.

@Chiefhao 8 ай бұрын

this is how these cars shouldve came from factory!. another great video! nice meeting you at SEMA this year! hopefully see you again next year!

@Darkslide2AR-FE 8 ай бұрын

It looks sooo much better!!! I agree with you, this is how the car should have came from the factory.

@RyansResolve 8 ай бұрын

Dude that made a huge difference. I finally don’t hate it 😂 shoutout Aeroflow the goats 🐐 I think it would look even better with that ride height dropped a smidge

@KevinVo 8 ай бұрын

One thing at a time! Haha

@paultaeza6054 8 ай бұрын

Actually looks super nice! Gj kevin

@TheOutlaw1221 6 ай бұрын

Cladding actually makes a lot of sense up here in Colorado with all the rocks and road salt etc. I get people aren't fans of the look but its pretty functional if you are actually getting outdoors when driving.

@Casualfan101 6 ай бұрын

convinced me to finally upgrade from my 15’ for the 22’ wrx It gets delivered next week, and first thing I’m doing is buying the Afd aero kit and paint matched fender flares! 🙏🏽

@trustno1_04 3 ай бұрын

Great video, thanks. Looks awesome 🤙

@oldpirate7434 8 ай бұрын

Looks very sharp!

@ryanm1394 6 ай бұрын

Am I the only one who noticed the rear panels don’t fully cover the two clip spots on the bumper 👀 I really wanted these but I think my OCD couldn’t let that slide 😢 7:40

@warlockd8660 8 ай бұрын

This needs to be on every new wrx... 🔥

@ubroberts5541 7 ай бұрын

Great video. Thanks!

@junebaka7877 8 ай бұрын

Personally love both but the AF flares make it look soo much better 😗👌🏼

@lacoupe5088 8 ай бұрын

I’m on the same boat. I don’t mind the cladding, and it definitely doesn’t look as bad in person verses the photos, but I gotta say, the paint matched flares look better. The bumper for sure needs some paint. That’s one thing I can’t get over, and I’ve had my VB for 7 months.

@KevinVo 8 ай бұрын

All in good time!!!

@lacoupe5088 8 ай бұрын

Agreed, modding a car is an expensive hobby.

@digitalsmithy 8 ай бұрын

the rear needs more paint than the front though...but yea..they both need some ha

@WrxJapanguy 8 ай бұрын

I’m on the fence I have a white one as well

@RSALS734 7 ай бұрын

Damn, that looks great!

@SarcasticComments23 7 ай бұрын

I actually liked the black a lot more :/ wonder what gloss black would have looked like

@strawhatpirates4038 8 ай бұрын

let go it looks amazing

@ecjaye 6 ай бұрын

Looks way better! Does Aeroflow make a paint matched rear bumper?

@scottsyverson8912 8 ай бұрын

Whats up with the fitment on the rears? I can see gaps toward the back after you were done installing--- 7:40-on and 11:17-on. was there any fix for that? I was thinking about getting a set and this was a little troubling.

@ivanarias399 8 ай бұрын

fire build!

@KevinVo 8 ай бұрын

Thanks! Still lots to do!

@awaysooner 7 ай бұрын

So much better.

@steve8803 7 ай бұрын

looks good either way, but even better after.

@victorserao7180 4 ай бұрын

👍 I like it much better with the corn French to match the paint and make the tires and rims look bigger as they

@Gregsheppo66 7 ай бұрын

Paint matched fender flares look 100% better on white paint plus the additional 10mm cleans up your poke if you’re running 9.5” wheels. 👍

@FernandoLucas48 8 ай бұрын

Honestly i like them both

@shawnpitchford777 8 ай бұрын

I bought the black Silica gloss, and it looks awesome, my girl made a point to me that the paint match made it look less like a race car, I protested at first but then I looked at pics in her perspective and I feel she is right, paint match makes it look like a normal car and less special.

@im_an_alvani 8 ай бұрын

WOW that is a huge improvement!

@Bl00dwerK 8 ай бұрын

Nice. Gotta change wheels now, for fitment and appearance.

@zn6andy 8 ай бұрын

kevin the goat

@henrynewgent8481 8 ай бұрын

I think if the fender flares were Atleast round I might like them better. Either way paint matched looks so much better than black plastic imo.

@realpopcaan 8 ай бұрын

No, that’s not your opinion that’s facts bro 😂 It’s practical for off-road ( no rock chip on paint) but it’s really a eye soar

@metalmonster34 20 күн бұрын

Looks sick. Are those the GT1 rims from AFD?

@davidstanic3081 4 ай бұрын

That looks way way way better. I don't know what Subaru were thinking putting unpainted parts on the car???

@patrickyau0615 8 ай бұрын

something about the rear flares look off

@Menace_sti 8 ай бұрын

They been on the list for the wrx for awhile but first some coilovers. But after im done with alil more stuff for the sti hahah😂😂😂

@ad.8369 2 ай бұрын

9:56 angles 🙌

@j012275 5 ай бұрын

If you look at your bumper compared to your quarter panel they do not perfectly match from factory and that is do to dissimilar substrates. Just an FYI you can not perfectly match even if the paint is applied at the same time, in the same booth, and with the same paint mixture. However looks good and most people will not pick up on it.

@rookietoprobuildz 8 ай бұрын

Easy mod, but major change 🔥

@FC-fq1gk 8 ай бұрын

Night and day so much better keep up the great work!!

@ApolloWRX23 7 ай бұрын

Hey what size spacers do you have on your wheels? I just got some new wheels and definitely need them to sit like that!??

@Woonderful86 8 ай бұрын

Please make products for the Gen 1 BRZ/86 as well!

@steve8803 7 ай бұрын

Are you going to paint the textured section of the rear bumper as well?

@notfrieze3843 2 ай бұрын

What do you do with the glue that comes with it ?

@cvette2005 8 ай бұрын

Looks way better. But the fitment of the rear ones seems a little off, especially behind the wheels

@Dreamevil2009 8 ай бұрын

Just a tip but I find if you heat while removing the tape will peel right off.

@timmyvechett 8 ай бұрын

Looks nice 9:23

@mattchernitsky6340 6 ай бұрын

If I ever get one I’m leaving the black I feel like the white washes out the body lines but to each their own

@SansooIan 7 ай бұрын

Its a great option, because even the body shop will not get the color 100% perfect. Just painting a bumper for a dodge ram recall will cost the dealership around 700. Painting is the most expensive thing done at any body shop.

@noahlee1001 8 ай бұрын

S209 Vibes

@atpgarageatl 8 ай бұрын

While I don’t mind the cladding on the white this completely changes the look. Subaru should take notes!

@ajvangorden1344 8 ай бұрын

Looks way better. I test drove a new wrx premium recently, way better than the 2020 performance pack wrx I had. I'm starting to really like the VB generation.

@BikesCarsAndSake 8 ай бұрын

What an improvement!

@russell3436 7 ай бұрын

I know 99% of customers hate the black plastic cladding all over the car but they actually have a purpose and help with the aerodynamics of the car. Painting over them or removing them defeats the sole purpose of what they are intended for, the car does look much better if it came that way from factory, I’m sure Subaru could’ve figured out a way to make them functional with color matching paint.

@bmanboogie 6 ай бұрын

May I ask how much the flares cost you?

@hahaadventures4838 7 ай бұрын

What wheels are those? Specs please 🙏

@gonzalezeduardo28 6 ай бұрын

whoever says they don’t mind the black flares, is lying. They’re just stuck with them until they save up to get the paint matched ones.

@deej628 8 ай бұрын

Dope. Definitely needs a smidge more low now like you said. 😢

@KevinVo 8 ай бұрын

Soon!!

@CaptainBlitz 8 ай бұрын

With the cladding gone the rear 3/4 looks kinda short and stubby especially with that spoiler I wish that's how it came from factory

@athotic 7 ай бұрын

just bought

@Krenisky 8 ай бұрын

Definitely should’ve came from the factory like that.

@Trisma 8 ай бұрын

100x better, the plastic grey guards are garbo

@skatetown100 7 ай бұрын

The cladding has definitely grown on me from when the car first came out ..

@robertmorano2372 4 ай бұрын

I really like both. The paint match definitely gives you more options for aftermarket wheels (aesthetically), but in stock form or with the right chunky wheel and tire setup, the black flares look great. Especially on the white, I love it. Ive built cars in the past, but the plans for this one are to stay mostly stock. Im a dad, live in the norttheast and the plastic fender flares are a welcome addition to the new wrx.

@sschon31 8 ай бұрын

Any experience with the Aeroflow Dynamics rear wing?

@KevinVo 8 ай бұрын

Not yet, but will likely be installing one!

@dreday3169 6 ай бұрын

So I went to the link to see how much those paint match flares cost. I'm shocked it's priced at $830.....for plastic. I was not expecting that price

@jamescooper5183 6 ай бұрын

I know right! I'm about to buy my own matching paint and clear coat and paint the factory ones...

@oOs4MzOo 3 ай бұрын

Whats is your offset?

@KhmaiMedia 8 ай бұрын

sooo much better with the matching flares.

@verginsergin Ай бұрын

Needs paint matched side skirts.

@lilfer8345 8 ай бұрын

So nice 💯👍

@BartlettRacing66 6 ай бұрын

Only $750 out of pocket to make the car look like it should have out of the factory, excellent.

@b3r15ky 7 ай бұрын

I guess 10mm really make a huge different eh?

@FA24D 8 ай бұрын

Much cleaner looking!

@nissan1580sx 8 ай бұрын

should have come out of the factory like this. much better looking

@ppw350Zunit 8 ай бұрын

This alone makes this car look 100x better. Now if only you can replace that rear black section 😂

@DanielC.959 8 ай бұрын

Can you sell me your HRS clear tail lights from the BRZ you took off before SEMA?

@dkoolin6529 8 ай бұрын

I like it but for $1000?

@avguylyfe5837 8 ай бұрын

Carbon ones i just peeped dont look half bad. I maybe the minority i love the interior. Exteriors grows on you with mods for sure

@ohgryph 8 ай бұрын

I will continue to say this until this car no longer exists or changes, This is exactly how the car should've came from factory. I just hope Subaru see's how much people dislike the fenders and color match them in the future with later models.

@diallo1347 8 ай бұрын

Not everyone hates them. Especially those of use who actually rally.

@xtrekrex 7 ай бұрын

Honestly I got used to the cladding. It’s really not that bad after owning it for a while. I think most VB owners can agree with this.

@jrod78414 7 ай бұрын

I love them. Why look like everyone else its wrx. A rally car Not a Gtd car.

@Vertignasse82 5 ай бұрын

Actually I like SOME contrast. For me the best solution is to keep the cladding but get the car in dark grey or black.

@diemf50 3 ай бұрын

To each is own majority of VB owners love the cladding. I dont want to make my car looks like a corolla with paint match lol

@maltpatriot4919 8 ай бұрын

Unfortunately with the white you can see in the video the color is off….

@Will-hs2um 8 ай бұрын

The way it should’ve came from the factory! 👌 Hopefully the next redesign fixes the pug face rear end and ford Taurus front grille.

@Chokiyumi 7 ай бұрын

Im actually getting the fenders in carbon fiber 🥵 to match my CF side skirts and lip

@thxmasge 8 ай бұрын

Damn it’s SO MUCH BETTER like that

@KevinVo 8 ай бұрын

It's pretty good isn't it!

@17.06.Copper 8 ай бұрын

PRO TIP* You can used WD40 to easily remove and eat away at the adhesive w.o damaging paint.

@ArkaynAdrian 8 ай бұрын

The fitment looks off and normally the camera part hides gaps etc. I think if you are super picky you would go the Axis Parts route instead..

@EdwardSteadfast 8 ай бұрын

Team cladding for me, especially on white. But your monster truck looks pretty good! 😇

@aerowick4643 8 ай бұрын

It should've came like that from the factory

@ayeits_jp 8 ай бұрын

Should have came like that from factory tbh. Looks complete now 👍🏻

@KevinVo 8 ай бұрын

Now we have something to build off of haha

@davidstanic3081 4 ай бұрын

You know what, gloss black would have looked nice if the car was black

@nathanjohnson705 Ай бұрын

I bought these in black, and the paint has started to chip off after about 5 months of being installed.

@vaporhazy Ай бұрын

I honestly wonder if just getting it painted would be better for the long term

@VBwrex 7 ай бұрын

I like the cladding, I take my car to the track a lot and it protects my paint

@regieds 8 ай бұрын

I think the cladding looked better. Paint matched looks so plain on this car.

@Kbang42 8 ай бұрын

Yessss…This is the look right here …. I never liked the black cladding on the white VBs.

@devinmartin3673 7 ай бұрын

Honestly, fitment doesn't look good. Especially the back side of the rear flares. I think this is a great and easy solution for paint matching the flares, but I hope AFD iterates on this in the future.