I think I’m gonna need some stuff cut out on that table.

Tom Tom dude you need to put out more of your own content. I’ve been watching Matt from the beginning, and In my opinion, you’ve been the greatest addition to his channel.

Hi Tom. I first remember seeing you on Matt's channel when you went with the group to rescue Ed's golden nugget. He brought you along to be the cook and you were happy to do anything that needed done. Then later you are working for him and you are the main spoke on the MORR wheel. Your personality and your extensive knowledge makes you a very interesting person. You are a problem solver and put thought into everything you do. I love it that you have your own channel. I'm sure the recovery job takes lots and lots of your time, but you still find some time for your own channel. Thank you for all you do for the MORR team. You are appreciated by all of us.

Tom, I would say you made the plasma table 11% taller, and 11% more mobile.

make a sign "TOM TOM'S SHOP" big enough to mount in the back of your shop. So when you are recording it shows up in the back and self-promotes yourself.

A very precise birdhouse would be fitting!

Excellent video! Looking forward to more!

You're a talented fabricator and a good man, Tom Tom. Keep it going!

My 2-cents on what to cut on your plazma table is a sign for your wall with the name of your KZfaq channel, and make it big enough so it can be seen in the background in your videos! Congrats on your new venture, Tom!

that is a true friend, wearing Matt's T-shirt while on your channel. selfless nice human being!

Tom Tom is Alive!!!! Good luck in your setting up. Looks like you need time and cash, hope it comes. Please paint the truck.

Love your personality Tom. You're a natural in front of the camera. Obviously very intelligent as well. Love to watch you build.

First time I've seen your wife, Tom. You married up -- good job.

All I can say is awesome. You are going to have people from all over wanting something cut out!

Tom, from what little info you've given us; your resume must be absolutely fascinating from being a nuclear engineer to being ADHD Matt's right hand man. I always appreciate your positive attitude.

Yay, Tom-Tom and Mrs Tom-Tom! Best wishes from the UK

Good your back! The best crew member of Matt’s. Great video. Good luck

You asked for suggestions. Build a case to mount all the electronics for for the plasma table. Put it on rollers and make it detachable from the bed frame, but secured with latches. Include filters to aid in keeping the metal dust and mist at bay. Second feature for the case; articulating arm to for the monitors, keyboard and pendant control.

Thanks for your reviews Tom Tom. It's like therapy for me to look at your projects and when you and your old friend Matt are working together. Before I was completely disabled and bedridden 95 % of the days from a too high immune response after the corona vaccine which attacked my nervous system about 2 1/2 years ago, I was very active both in sports, hiking and had different projects there I loved the development. I wish you luck. With best regards from Arne in Norway.

Tom you are the best. I've learned a lot from watching you. Move content please

This is cool! I had no idea you had a channel Tom Tom. I'm glad this video randomly popped up. I agree with what others said about you being a great addition to Matt's channel. I'll be looking forward to seeing more content from you!

Great to see you in your shop again..... Matt will be so embarrassed to see someone he knows actually cleaning and organizing their things....

I really enjoy your work Tom Tom. I was really happy to hit the "Subscribe" button.👍👍

Another video! Glad to see that the table is now mobile and you can move it around. It’s a very cool set up. Can’t wait to see what you start cutting up. When you said you knew where there was a bunch of metal for scrap pieces the first thing I thought was Matt’s place. 11:40 😂😂😂😂

Definitely looking forward to more videos from you! How about a design and cutout of a Tom Tom logo for the shop and your own brand!

What ever you post man I will watch wish you the best! You're in charge of your future

"I build a CNC cutting machine". "just a regular Windows computer I build". FFS Tom, that's why you are an inspiration. Such a talented guy.

Lol. Love the end clip with Matt. Cool machine. I'm sure all guys will be using it.

Can't say how pleased I am to have found the channel Tom. TY

I think your channel has great potential. Judging by what we see on Matt’s channel, you have a deep commitment to doing things properly, and the contrast between your method and the “shade tree” shenanigans will be interesting to see.

Interesting !!! Today I was thinking about what value you have added to Matt’s operation. You should do well with your energy and smarts!! Great project you built…

Just by pure reputation, Tom could open up his own fab shop and he'll be booked months in advance!

Great to see content of doing it right and educational for our benefit, keep it up!

Hi Tom you are back I am sosososo very happy you are back can you do more new show for all of us please thank you sosososo much we will be waiting for you ok and please be careful out there ok I will always praying 🙏 for 🙏 you so you will be safe ok you have a wonderful day and have a good night and day ok love Lorilee xoxoxoxox

Weld a stand to the CNC machine. That will keep the PC and CNC brain together with the machine. It combines what you like and what you need.

Tom;...with a horse you are not foaling around... nice to get it going again...!

Tom, this video shows a little bit about how intelligent you are! I hope that with your connections with the off-road community you will get plenty of jobs cutting out the pieces they need. God bless you and your family. Father God, I pray for Tom’s new channel, I ask that it will be a huge success, please bless him and his family. I ask this in the name of our Lord and Savior Jesus Amen

Neat! Looking forward to seeing make masterpieces with it!

Tom you are a very smart guy and a good fabricator

My first time finding your channel, I’m subscribing! Matt would be do far in the weeds without you and your talent!

Thanks, fabrication without singing and joking! Awesome keep it coming.

Great video Tom. You should cut out the parts to put your computer under the table and a spot to view your monitor and access your keyboard. I saw your wife filming in Dig Doug on Matt's video today at Wayne's World. Hope to see a video of you and your wife enjoying your time there.

Looking forward to more from you, Tom. Gonna be a great channel. I like the quality of your work. Here is how I rank my favorite channels in regards to quality of workmanship: Chad's Fab Tom Tom's Shop Robby Layton Merlins OSG MORR Trail Mater Fab Rats

nice to seee another video drop from Tom Tom, always well explained content, thanks for sharing Tom Tom

You're a joy to watch. 👍👍

YES Tom-Tom its good to see you in a new video. Best regards from Southeast Asia

YES!! So excited to see content from you Tom! If you were more consistent it would be greatly appreciated I’m sure 🥹

ALWAYS appreciate seeing you in your "element" Big T

We need more Tom Tom!

Good to see you back Tom Tom

Dam I didn’t know you had your own channel ! I love watching MORR videos and you’re in it. Subscribed !!

Yes Tom! You are my favourite channel to watch here on KZfaq! with matt a close second ha.

Keep it up!!

Good Job Tom -- make more videos -- you are good at it.

Beautiful wife helping out

Congratulations Tom Tom! Its about time to upload more of your videos.

Glad to see you getting views, you deserve it. Great dude, great fabricator. 🙌🏻

Tom Tom! Glad I found your channel. I love to see the new content.

Way to go Tom. I know how good it feels to get an old machine working again. I just rebuilt an old Delta wood lathe. Very satisfying?

Can’t wait to see what fun you get up to in the new shop!

I've watched Matt for a few years. How often do you say (or want to say) "I told you so"? You bring a huge measure of missing common sense and patience to Matt's operation. Your plasma table is just plain cool.

Amazing that you built your own CNC...even assembling one from a kit is quite a job.

Tom Tom, loved your video today. Please get a light that shines up on your face, instead of your hat shading your face from the overhead light. The shadow makes the picture dark. I am looking forward to more content from your channel. I love watching you and Matt build things. Your expertise and knowledge is a nice balance to Matt's "shoot from the hip" building style. What a nice compliment for two gearheads working together. Your design and precision in building items will be nice to watch.

Looks like you’re going to have a great shop of your own.

Tom Tom your back. Glad to see you in your shop. You should cut out a name plate for Dig Dug.

So cool! As a fellow engineer, DIYer, and working in manufacturing, this makes me very happy!

Love the channel TOM TOM.

Great vid Tom! That table cuts FAST!

Keep putting out the content ... I like the one man show you got going on...

Let's face it, Tom. The reason you welded those casters on instead of bolting them is because you don't have Sally there at your own shop! (Although I did see a drill press in the background). Love that plasma table!

Tom, you the wizard!

Good to see new content on your channel Tom. I'm excited for you.

Didn't know about this, now I do. Another channel to watch, thanks Tom. Your wife is pretty, no need to be shy. :)

Tom, the man of many talents!

Well done Tom. You can do some part for matt's project's and charge him. I am sure they don't mind helping you. You scratch my back I scratch your back kind of deal. Robbie and the rest of the group always need some part made so there is a little side business if you ever get any "Free Time" from rescuing stranded people.

Tom Tom, i think you need to replace the plasma cutting torch with a laser cutting head. Ive been getting stainless steel cut with them, and the cuts are within, .3 to .5 of a mm at 25mm thick steel. The cuts are so smooth it saves a lot of grinding. Also it cuts a lot of other materials, plastics, wood ect.

This is awesome! More CNC!

I put my backyard 7' x 7' shed on caster wheels to move it around when needed. Glad I did.

What you need to cut next are: custom badges for DigDug

Yayyy thank you Tom Tom

You really are one of the coolest people on the planet

Matt @ the End Says it all, that is His “it's about Time you put This Channel together Tom Tom”, Face. I've seen it before 😂. Really think You are going STRAIGHT to the TOP good Sir, You are a True to the Term Gentlemen & a Scholar. I Hope to catch You on the next One, Keep it Safe Out There Sir

This is awesome. I run an X-carve at home for wood. The best "upgrade" I ever did was install a mini PC permanently next to the CNC to avoid the extra step of hauling a laptop into the shop and risking busting that.

After a career working on motor vehicles I helped a friend in his business building CNC machines for building electronic prototype circuit boards. They operated in mils. I enjoyed that change . We were developing CNC machines to cut body armor and labor cutting. He moved out there and wants me to visit, He just wants to put me back to work as I do perfect work. 😂. ( I retired...sorta) Enjoy your table! Limited by your imagination!

Tom “the brains” Tom all the best videos have you in them my friend. Keep on building your own thing and then I’ll have two places to enjoy your content.

This was educational, plus it's terrific to watch maintenance videos.

I agree more shows ! You are very talented and are a great addition too Matt's show you made his show 11% better lol

I’ve never thought of using PBB for cleaning or lubricating. It’s my go to for stuck bolts, nuts, etc. Great to see Angela on your video.

Keep the great videos coming!

Gotta love ALL these AMAZING UTAH Fabricators! Each one has his own set of talents! Love all their channels.

I'd love to work for you! Tomtom, your style is awesome! Safety can be observed, stuff still gets done and everyone can still have a good time!

Can't wait to see dig dug fully built out and give the yellow fleet a proper run for there money, might have to get Rory to give a few pointers as to what works on the old leaf machines

Hey Tom Tom can’t wait to see your project’s ☮️❤️👍✌️💪🏻

Brings back good memories of me watching and learning from a very talented NASA tech I worked along side of a few years ago. Huge respect to you folks who can get it done both mechanically and electrically.

Life and time saver once fully set-up and dialed in.

Well done Tom

Glad you have a channel bro. But please don’t leave Matt like others have. Do both. 👍

Woo hoo! That awesome that you got the table up ( on wheels) and running ( cutting metal). I know you're happy. Your wife's bracelet is cool too. More content!!

Nice video Tom. Keep 'em coming.

You are the best Tom Tom and you make everything look professional on Matt’ Off Road Recovery .. 😂 We need more of your Vlogs on the same day Matt uploads