No video

Finishing the arbor. Bad Spacers cause a bow!

  Рет қаралды 86

Depth_of_Cut

Depth_of_Cut

3 жыл бұрын

I finished rebuilding the abused arbor. Found bad spacers that caused a severe bow when tightened down.

Пікірлер: 1
@danielabbey7726
@danielabbey7726 3 жыл бұрын
Really good discussion. Bought an old P&W 3C bench-top mill last year, with a nice lot of old horiz. arbors (all under 1in). Looks like I'll be checking all the nuts and spacers with a dial indicator!
I Bought A Minimill to see if they are Worth It
8:03
Someone Should Make That
Рет қаралды 1,1 МЛН
Internal Splines (and Hexes Too)
28:28
Jeremy Makes Things
Рет қаралды 936 М.
Schoolboy - Часть 2
00:12
⚡️КАН АНДРЕЙ⚡️
Рет қаралды 17 МЛН
Gasoline or Kerosene in Clayton & Lambert co. Model 22-A
10:28
Depth_of_Cut
Рет қаралды 1,4 М.
14" rockwell lathe taper attachment (part 1)
23:42
Depth_of_Cut
Рет қаралды 457
Many Moving Magnets Melting Metal
20:21
Cody'sLab
Рет қаралды 2,9 МЛН
Simple and Accurate method of single point Thread Cutting
27:30
How a quartz watch works - its heart beats 32,768 times a second
17:35
End of Epoxy Tables
30:04
Blacktail Studio
Рет қаралды 2,3 МЛН
Diagraph repair (part 1)
12:07
Depth_of_Cut
Рет қаралды 261
Fixing Everything Wrong With My Mini Lathe
13:52
Camden Bowen
Рет қаралды 308 М.
WANTED: Dead or a LIVE CENTER
25:44
Inheritance Machining
Рет қаралды 561 М.
Schoolboy - Часть 2
00:12
⚡️КАН АНДРЕЙ⚡️
Рет қаралды 17 МЛН