I love how easily everything just comes right out on his SKS. It must have been taken apart and cleaned many times. My firing pin retainer was IN THERE

I like this guy. Very professional, non-dramatic, and straight forward. I especially like the lack of any music soundtrack. Thank you sir.

best SKS disassembly video out there in my opinion

As a Canadian, this was the First rifle I got. Love it to death, still use it to this day. Good sturdy beginner rifle that holds its own!

first gun im getting when i get my PAL!

Such an easy to understand step-by- step video! Thank you so much!

Very well explained. You have a good radio voice or country singer

Thanks for the quick easy instructions. Usually people want to tell there life story during these

Thank you for a great video. I just purchased a nice SKS soaked in cosmoline. This really helps!

what a great series of videos (1-4) very clear and to the point. Ill keep an eye out for your products for giving me some real peace of mind in regards to my SKS

it's been quite some time since I've cleaned or fired mine, I was planning on doing some "upgrades" & cleaning...very helpful!

Great video series!

Well done. I miss my SKS (I'm in Australia).

I never knew the piston extension came out... There was a ton of cosmoline in there (possibly my favorite smell).

You forgot to mention to make sure the safety is on before trying to remove the barrel from the stock. Once I turns it on the barrel dropped right out. Thank God I stopped & viewed another video. Other than that you were right on & this was very helpful. Thank you for these videos.

FYI - The safety has to be in the "safe" up position before you can remove the trigger group.

This is super wicked awesome

One detail that was missed; the safety must be on to depress the trigger guard latch, at least on my '43 it does. I fought with this my first time around.

Great info, thanks for sharing

Thanks sir U r awsm, respect bro

Just got a SKS👍 excited to shoot it.

Very nice sir

Great vid

Excellant! Not too long ,,no added yak yak BS.

Great videos! Do you know of a service/disassembly/reassembly document I can get for this gun?

Note to all dummies like myself the SKS has to be on safety before you take out the trigger assembly

This series is fantastic for the new SKS owner. Any tips for removing a stubborn firing pin retainer? Mine is jammed in there something fierce.

My hand guard wont come off. No idea what im doing wrong

Very well done video. When pressing the trigger guard latch in disassembly, does it matter whether the safety is on or off? My firing pin retainer will not easily push out with a punch as you demonstrate. Mine requires a hammer to remove and reinstall.

I have a question from Brownells' I own a SKS, standard Russian 10 round capacity, fires great, fairly accurate...I like it. But I quite accidently discovered when I went to remove it from the gun safe, I sort of bobbled it a bit and it dropped about 3 inches and the rifle tapped the ground on the way out and it self chambered a round and was ready to shoot. Handling the rifle in a normal fashion has never caused a round to just load by itself. But eventually I discovered that in a stress situation where I want the rifle ready to fire before I even bring it up to sight, is I simply grab it from the case, and as soon as clear the case, I quickly tap the butt of the rifle on the floor and it loads and I bring it up and I take it off safety and sight. I am wondering if you can duplicate this with your on SKS stock and confirm if this is just a happenstance thing or my rifle is possible a problem and I should take it to a gunsmith.

جيد جدا Vary good

is the piston in the hand guard different on a chinese sks?

how does the disassembly differ if the SKS has a magazine?

My sks only holds 7 rounds.. something wrong with the magazine and it won’t go all the way down. Any help?

Bloke looks like someone tried cutting my reciever...any ideas 💡 buckaroo

Put links to the other videos in your description

What about the bolt hold open latch???

I can’t push in the firing pin retainer…did I miss something or it just stuck very bad?

Need safety on to remove trigger group

Great series on care for the SKS. That stock.. I would strip it, steam it, fill in dings, stain, sand, and seal it, but that's me.

Im having problems disassembling my SKS. The person in the video is able to disassemble the SKS with ease and without using tools much, but for me I have to use tools to even move the take down lever. Is there something I can do so that it is possible to disassemble my SKS as easily as the guy here or at least easier?

I think the spring assembly was in backwards? shouldn't the straight part be facing forward?

I can’t get firing pin retainer out, any suggestions?

Any help with a stuck firing pin retainer?

Do not get me wrong, I do love this rifle. But the one thing I don't like about this rifle (as a practical military rifle) is the reliance on a punch for basic field stripping. Not only is the amount of force to remove the trigger assembly downright painful, but a punch is often (but not always) needed in order to swing the takedown levers (gas tube and dust cover) as well.

Hej rocznik tego sksesa to ?

You are putting the spring in backwards. Curvy in the back.

my gas tube piston on my sks doesnt come out is that normal? i have a yugo sks just wondering what may be the problem or is that how yugos are setup?

Can anyone help me...I do not have a punch...what can I substitute a punch with?

lol firing pin retaining pin doesn't just pop out that easy

Thank you, the cosmaline is no more

My firing pin retain is stucker than a civic in a mud pit

私はモシンナガン派だ

شرح جيد لكن السلاح قديم

Why you no have bayonet?

Him. *pulls it out.* Me and my bud *bitch slapping with a mallet cause its rust welded*

Well done. I miss my SKS (I'm in Australia).