First attempt forged carbon fiber skinning a potato.

Рет қаралды 1,420

Күн бұрын

Part 2: • Found an easier way to...
Exploring the standard way to skin a 3d printed potato head with forged carbon fiber fabric. This is my first try where things did not go as planned.
▶▶▶ Supplies◀◀◀
R-Bond Forged Carbon Fiber Fabric: ulticarbon.etsy.com/listing/1...
Total Boat Epoxy Resin: amzn.to/43rDQMi
Mini Foam Brushes: amzn.to/4asgrfL
Resin Cups: amzn.to/3UTfBmG
Music by Epidemic Sound: share.epidemicsound.com/qlxlyz
The above links include Amazon affiliate links. As an Amazon Associate I earn from qualifying purchases when you shop through these links at no additional cost to you. Thank you.
00:00 3D Printed Potato Head to Skin
00:35 Applying Epoxy Resin
02:14 Tacky Resin
02:30 Applying R-Bond Forged Carbon Fiber Fabric
12:25 Peel-Ply Stuck to Part
13:08 Giving Up
13:26 Applying More Resin
15:31 Speed Up Resin Cure with Heat
16:25 Sanding Forged Carbon Fiber
16:47 Result
17:03 Tater Rating
#forgedcarbon #carbontator #carbonfiberart

Пікірлер: 23

@OhHeyTrevorFlowers 22 күн бұрын

I hadn't seen forged carbon adhered to a printed form. Thanks for sharing your process! Separately, the printed head by itself was a pleasing sculpture; maybe a ceremonial mask from an alternate timeline. 😸

@LindyDesignLab 22 күн бұрын

I like it.

@misamokuzelpizu 22 күн бұрын

thats a good idea, cf on top pf a print. maybe i have to try that with a vacuum bag.

@oussamalasfer4860 15 күн бұрын

mr potato is stronger than ever !!!!

@LindyDesignLab 15 күн бұрын

Do you think he would like a tiny carbon fiber sword?

@oussamalasfer4860 15 күн бұрын

@@LindyDesignLab Ms. potato will like to see her husband as knight !!

@wreckervilla 22 күн бұрын

I really wish there would be different colors with the same crystalline texture effect as "forged" carbon, a deep metallic blue would make an amazing top layer

@LindyDesignLab 21 күн бұрын

Maybe a tinted clear coat?

@VicMorrowsGhost 21 күн бұрын

If you're working with your own 3D model it could be worth doing a simple UV unwrap of it and using that as a stencil to cut your fibre to fit before you try to wrap it. The mapping will make it fit the 3D form perfectly. Just like a texture would in the computer. It would eliminate the awkward relief cuts and overlapping of the flat sheet.

@LindyDesignLab 21 күн бұрын

You might be onto something there.

@jonathanmsmith 22 күн бұрын

MKBHD: matte black everything LDL: carbon fiber everything

@LindyDesignLab 21 күн бұрын

@Jonathanos12 20 күн бұрын

I would be wearing a mask regardless if you saw particulates or not

@Ragnarok043 18 күн бұрын

one trick for loose bristle hairs is to CA glue the base of the bristles beforehand to lock them in.

@LindyDesignLab 18 күн бұрын

Oh I like that, great idea.

@Euroburger 22 күн бұрын

Going from the fact that the potato has add-on parts I assume there's holes to stick those parts in so wouldn't it be a lot easier and less messy to shove a stick in f.e. the hat hole at the top so you can hold the body or set it up straight? And shred the carbon into small pieces put them in a tray, dip the body into resin and roll it through the shredded carbon, like the way they make candy apples.

@LindyDesignLab 21 күн бұрын

Smart people are awesome.

@norastorvik4155 20 күн бұрын

Why do you not wear a mask?

@LindyDesignLab 20 күн бұрын

The R-bond forged fabric doesn't kick up fibers like a bag of loose chopped carbon would. When sanding, absolutely wearing a mask.

@norastorvik4155 20 күн бұрын

@@LindyDesignLab The worry is the resin off gassing tho, no?

@LindyDesignLab 20 күн бұрын

Large room with ventilation. Also this particular epoxy resin cures very slowly and doesn't fume the place up like some others. Maybe respirator still a good idea though, I don't know.

@norastorvik4155 20 күн бұрын

@@LindyDesignLab Thank you for considering a respirator, I love resin and all the things, but please take care of you first. It's difficult to film with a traditional respirator, sure, but worth it no doubt

@norastorvik4155 20 күн бұрын

@@LindyDesignLab you're too talented, likeable, and charismatic to be taken out by something preventable